Microchip Technology

ATF22V10CQZ-20PC - 10-Macrocell CMOS PLD | Microchip

부품 번호: ATF22V10CQZ-20PC ✓ 활성
5 V Vdss 24-pin PDIP Package 20 ns Speed Electrically erasable flash memory Memory
MOQ: 1 |

ATF22V10CQZ-20PC 개요

The Microchip Technology ATF22V10CQZ-20PC is a high-performance electrically erasable CMOS programmable logic device with 10 macrocells, a 5 V supply, and a 24-pin PDIP package. It combines a compact PLD architecture with electrically erasable flash-memory technology, allowing the implemented logic configuration to be reprogrammed without replacing the device.

A programmable logic device is a semiconductor that stores a configurable Boolean logic function. The ATF22V10CQZ belongs to the PLD family, within the broader logic IC and semiconductor hierarchies. Its ten outputs are each allocated 8 to 16 product terms, making it useful for implementing compact combinatorial and registered control logic where a conventional gate array would be unnecessary.

The ATF22V10CQZ family incorporates a superset of the generic 22V10 architecture and supports direct replacement of 22V10 devices and most 24-pin combinatorial PLDs. Three operating modes are selected automatically by configuration software. The family also provides high-speed operation, with speeds down to 12 ns across its supported speed ranges, while the -20PC suffix identifies a 20 ns device in the 24-pin PDIP configuration.

Each output is implemented using product terms, while the device architecture supports simple combinational functions as well as more complex sequential logic. The electrically erasable flash-memory process retains programmed data without the complexity of a volatile configuration scheme and supports repeated in-circuit programming using the manufacturer’s recommended programming system.

Typical uses include legacy industrial control, interface decoding, state-machine logic, data routing, and compact glue logic for older processor or peripheral systems. The ATF22V10CQZ-20PC is especially relevant to equipment that was designed around 24-pin DIP PLDs and requires a nonvolatile, reprogrammable logic implementation.

For new PCB layouts, verify the complete pin assignment and programming requirements against the manufacturer datasheet before ordering. Existing 24-pin PLD boards should also be checked for supply voltage, timing, and pin-function compatibility. Because the device is a legacy-style PLD, software support and long-term availability should be confirmed before committing to a large redesign.

This page combines the manufacturer’s device architecture information, package and application context, drop-in family alternatives, and practical selection guidance to help engineers determine whether the ATF22V10CQZ-20PC can be used without changing an existing 24-pin logic design.

드롭인 대체품: ATF22V10CQZ-20PC — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

ATF22V10CZ-20PC

✅ 드롭인 ⚠️ 사양 미검증
📦 24-PDIP
20 ns speed grade and 10-macrocell architecture are unchanged; only the family suffix changes from CQZ to CZ

📋 참조 대체품 (카탈로그에 없음)

ATF22V10CZ-15PC

✅ 드롭인
📦 24-PDIP
15 ns speed grade versus 20 ns, making the replacement 5 ns faster while retaining the 24-pin PDIP footprint

📋 참조 대체품 (카탈로그에 없음)

ATF22V10CZ-25PC

✅ 드롭인 ⚠️ 사양 미검증
📦 24-PDIP
25 ns speed grade versus 20 ns, making the replacement 5 ns slower while retaining the 24-pin PDIP footprint

📋 참조 대체품 (카탈로그에 없음)

ATF22V10CQZ-20PI

✅ 드롭인
📦 24-PDIP
20 ns speed grade is unchanged; the PI suffix selects a distinct temperature-grade option in the same 24-pin PDIP family

📋 참조 대체품 (카탈로그에 없음)

ATF22V10CZ-20PI

✅ 드롭인 ⚠️ 사양 미검증
📦 24-PDIP
20 ns speed grade is unchanged; the family suffix changes and the PI suffix selects a distinct temperature-grade option

📋 참조 대체품 (카탈로그에 없음)

ATF22V10CQZ-20PC 최대 정격 & 전기적 특성

Device Type Electrically erasable CMOS programmable logic device
Macrocells 10 macrocells
Outputs 10 outputs
Product Terms per Output 8 to 16 product terms per output
Target Speed Grade 20 ns
Family Maximum Speed 12 ns
공급 전압 5 V
Logic Gate Capacity 500 gates
Configuration Memory Technology Electrically erasable flash memory
Process Technology CMOS
Operating Modes 3 automatically selected modes
Architecture Superset of generic 22V10 and most 24-pin combinatorial PLDs
Standby Power 0 W
패키지 24-pin PDIP
실장 유형 Through-hole
핀 수 24 pins
Programming Electrically erasable and reprogrammable

ATF22V10CQZ-20PC 24-pin pdip 핀 구성 가이드

ATF22V10CQZ-20PC(24-pin pdip 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

ATF22V10CQZ-20PC의 24-pin pdip 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ATF22V10CQZ-20PC.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ATF22V10CQZ-20PC 적합 용도: 6 애플리케이션s: Legacy Industrial Control Logic, Interface Signal Decoding, State Machine and Sequence Control, Data Routing and Signal Conditioning, Instrument Control and Measurement, Field-Programmable System Maintenance.

🏭

Legacy Industrial Control Logic

The ATF22V10CQZ-20PC fits compact legacy control boards that require several Boolean equations, state transitions, and output interlocks without the component count of discrete gate logic. Its 10 macrocells and 10 outputs provide 8 to 16 product terms per output, while the 20 ns speed grade supports common control and sequencing paths. The electrically erasable flash configuration allows a logic revision to be loaded during maintenance without replacing the IC. For an existing 24-pin PDIP PCB, the DIP package simplifies mechanical replacement, but designers should verify operating temperature, timing margins, and the programmed mode against the manufacturer datasheet.

🔧

Interface Signal Decoding

The ATF22V10CQZ-20PC is useful for decoding address, command, status, or interlock signals where compact combinational logic is needed at the edge of a controller. Ten outputs with 8 to 16 product terms each allow address qualification, active-high or active-low decoding, and output masking to be consolidated into one device. Its 5 V CMOS operation matches established 5 V logic systems, while the 20 ns speed rating provides deterministic propagation timing for moderate-speed buses. Designers should include the device’s output-disable behavior and programmed operating mode in the interface timing analysis rather than treating it as an unstructured combinational gate array.

⚡

State Machine and Sequence Control

A small state machine can be implemented in the ATF22V10CQZ-20PC when the design needs more structured behavior than simple combinational decoding but does not justify a microcontroller. The device provides three automatically selected operating modes and 10 configurable outputs, allowing state variables, transition conditions, and output actions to share one programmable logic package. Its 20 ns speed grade is appropriate for many control loops and handshake circuits operating well below modern processor speeds. The 24-pin PDIP package also makes the device practical for repair-oriented legacy equipment. Validation should include reset behavior, unused-pin treatment, propagation delay, and reprogramming procedures specified by Microchip Technology.

🌐

Data Routing and Signal Conditioning

The ATF22V10CQZ-20PC can implement small routing, mux, latch, and polarity-conversion functions between slower legacy subsystems. Its electrically erasable flash configuration supports design iterations by allowing the logic equations to be updated without changing the PCB, while zero standby power dissipation is useful in continuously powered control equipment. The 20 ns timing grade helps preserve data validity in moderate-speed control paths. Because the same physical package supports several automatically selected modes, engineers should review the configuration documentation for enable, feedback, and output-control behavior. Signal-integrity checks should include grounding, supply decoupling, and rise-time limitations of the legacy CMOS outputs.

📺

Instrument Control and Measurement

The ATF22V10CQZ-20PC can implement front-panel sequencing, range selection, relay-control interlocks, and status decoding in legacy test and measurement equipment. Ten outputs are sufficient for coordinating multiple instrument functions, while 8 to 16 product terms per output support practical Boolean conditions. The 24-pin PDIP package suits repairable instruments and through-hole prototype assemblies, and the 20 ns speed grade handles control paths without introducing the resource demand of a larger FPGA. Engineers should verify supply tolerances, input thresholds, output leakage, and thermal limits against the manufacturer electrical tables before using the device in precision measurement systems.

🖥️

Field-Programmable System Maintenance

The ATF22V10CQZ-20PC is well suited to maintenance-oriented systems in which board-level logic must be revised during product support. Electrically erasable flash memory permits the configured logic to be reprogrammed, reducing the need to stock a different PLD for each firmware revision. The 10-macrocell architecture supports compact configuration corrections, while the 24-pin PDIP footprint makes mechanical replacement straightforward on existing boards. A controlled revision process should retain the original configuration file, programming-equivalent settings, and validation record. This approach is most appropriate for legacy equipment; new projects should also evaluate whether an MCU or CPLD provides better long-term tooling, documentation, and lifecycle support.

추천 제품 요약

ATF22V10CZ-20PC same-architecture 24-pin DIP alternative 사용처: Legacy Industrial Control Logic, Data Routing and Signal Conditioning, Field-Programmable System Maintenance ATF22V10CQZ-20PI temperature-grade family alternative 사용처: Legacy Industrial Control Logic, Data Routing and Signal Conditioning, Instrument Control and Measurement, Field-Programmable System Maintenance ATF22LV10C-10SU Microchip Technology 사용처: Legacy Industrial Control Logic, Field-Programmable System Maintenance ATF22V10CZ-15PC faster same-package speed grade 사용처: Interface Signal Decoding, Instrument Control and Measurement ATF22V10CZ-25PC slower same-package speed grade 사용처: Interface Signal Decoding, Instrument Control and Measurement ATF22V10CQZ-20PC Microchip Technology 사용처: State Machine and Sequence Control ATF22V10CZ-20PI temperature-qualified family option 사용처: State Machine and Sequence Control
What is the ATF22V10CQZ-20PC?
The ATF22V10CQZ-20PC is a 10-macrocell, electrically erasable CMOS programmable logic device from Microchip Technology, supplied in a 24-pin PDIP package for a 5 V supply. According to the manufacturer datasheet for the ATF22V10C(Q)Z family, its architecture is a superset of the generic 22V10 and can directly replace many 24-pin combinatorial PLDs.
What are the key specifications of ATF22V10CQZ-20PC that engineers should know?
The ATF22V10CQZ-20PC provides 10 macrocells, 10 outputs, 8 to 16 product terms per output, a 5 V supply, and a 20 ns speed grade in a 24-pin PDIP package. The manufacturer identifies the ATF22V10CQZ family as a CMOS electrically erasable flash PLD with three automatically selected operating modes, zero standby power dissipation, and compatibility with generic 22V10 and many 24-pin combinatorial PLD implementations.
Where can I download the ATF22V10CQZ-20PC datasheet PDF?
The official ATF22V10C(Q)Z datasheet PDF is available from Microchip Technology through the product datasheet link on this page. It covers the shared ATF22V10CZ and ATF22V10CQZ architecture, including the 10 macrocells, output product-term allocation, operating modes, electrical characteristics, package options, and programming architecture. Use the -20PC ordering information to identify the 20 ns, 24-pin PDIP configuration.
Where can I find the ATF22V10CQZ-20PC pinout?
The ATF22V10CQZ-20PC uses a 24-pin PDIP package, and its authoritative pin assignment appears in the Microchip ATF22V10C(Q)Z manufacturer datasheet. Use the package drawing and pin-description table when assigning PCB tracks, programming pins, supply connections, and grounds. Because this legacy PLD can be programmed in multiple modes, confirm the pin table for the specific configuration file rather than relying only on a generic 24-pin symbol.
Can ATF22V10CQZ-20PC be used for combinational and sequential logic?
Yes, the ATF22V10CQZ-20PC supports multiple logic implementations through its PLD architecture and three automatically selected operating modes. The manufacturer states that each of the ten outputs is allocated 8 to 16 product terms. This allows the device to consolidate compact combinational equations, registered control functions, and state-machine logic in a single 24-pin device instead of using several conventional logic packages.
What power supply voltage does the ATF22V10CQZ-20PC require?
The ATF22V10CQZ-20PC is a 5 V CMOS programmable logic device. Its programmed configuration is retained in electrically erasable flash memory, and the family is specified with zero standby power dissipation. Designers should follow the manufacturer’s input-voltage limits, decoupling recommendations, and output-drive conditions from the ATF22V10C(Q)Z datasheet when laying out a new board or repairing an existing installation.
What is the best drop-in replacement for ATF22V10CQZ-20PC?
The ATF22V10CZ-20PC is the closest same-family drop-in candidate because it retains the 20 ns speed grade, 10-macrocell architecture, 5 V supply, and 24-pin PDIP footprint while changing the device-family suffix. The slower ATF22V10CZ-15PC and ATF22V10CZ-25PC may also fit electrically and pin-wise, but their timing differs by 25 ns and 5 ns respectively. Confirm the complete pin table and required operating mode before replacement.
What can replace ATF22V10CQZ-20PC on a 24-pin PDIP PCB?
A 24-pin ATF22V10CZ-20PC is the most direct replacement candidate because it preserves the -20 speed designation and PDIP footprint. ATF22V10CZ-15PC and ATF22V10CZ-25PC can be considered where their different 15 ns or 25 ns timing grades satisfy the system requirements. Pin compatibility alone is not sufficient; reprogram the device and verify timing, power-up behavior, and the logic mode used by the original board.
ATF22V10CQZ-20PC vs ATF22V10CZ-15PC — which is better for legacy control logic?
Choose ATF22V10CZ-15PC when the board can tolerate a faster device and the 20 ns ATF22V10CQZ-20PC is not required; its speed grade is 5 ns faster. Retain the ATF22V10CQZ-20PC when timing margins depend on the specified 20 ns device or when substitution must preserve the original qualification and documentation. Both use the 10-macrocell ATF22V10 architecture, but configuration, temperature grade, and program compatibility should still be checked.
ATF22V10CQZ-20PC vs ATF22V10CQZ-20PI — which is better for an industrial system?
The ATF22V10CQZ-20PI is preferable when an industrial-temperature version of the same 20 ns ATF22V10CQZ architecture is required. The ATF22V10CQZ-20PC remains the standard 24-pin PDIP option for legacy commercial or industrial equipment whose temperature range is acceptable. Both retain the same nominal speed and PLD architecture, but their ordering suffixes distinguish temperature or qualification options.
When should I choose ATF22V10CQZ-20PC over ATF22V10CZ-20PC?
Choose the ATF22V10CQZ-20PC when maintaining an existing CQZ-family design, programming file, qualification record, or approved bill of materials is important. Choose ATF22V10CZ-20PC for a new design only after confirming that its 20 ns speed grade, 10-macrocell architecture, supply requirements, and configuration flow are acceptable. The two parts appear closely related, so the replacement decision should include schematic, timing, and programming validation.
Is ATF22V10CQZ-20PC suitable for industrial control and interface logic?
The ATF22V10CQZ-20PC is suitable for legacy industrial control and interface logic when its 5 V supply, 20 ns speed grade, and 10-macrocell capacity meet the circuit requirements. Its electrically erasable flash configuration allows logic revisions without a device change. For new industrial products, verify the exact temperature grade, lifecycle status, software support, and qualification documentation before committing the part to a long-lived design.
Where to buy ATF22V10CQZ-20PC online?
Use the Request a Quote form on this page to request the exact ATF22V10CQZ-20PC, package, quantity, and target delivery requirements. The form allows procurement to confirm current source, lot availability, packaging, and lead time without relying on a potentially stale catalog listing. Include the 24-pin PDIP requirement and any programmed configuration or traceability requirements in the request.
What is the price of ATF22V10CQZ-20PC?
Current unit pricing for the ATF22V10CQZ-20PC should be obtained through the Request a Quote form on this page. The request should identify the exact 24-pin PDIP MPN, annual and prototype quantities, and any programming or assembly needs. This avoids presenting a historical catalog figure as current and allows the supply channel to account for market availability, lot status, and packaging requirements.
Is ATF22V10CQZ-20PC in stock, and what is its lead time?
The current stock position and lead time for ATF22V10CQZ-20PC should be confirmed through the Request a Quote form on this page. Submit the required quantity, 24-pin PDIP packaging preference, and whether factory programming is needed. If the design is a maintenance purchase, requesting a like-for-like replacement with traceability can help the supply team check equivalent factory stock and acceptable lot conditions.
What is the best Microchip equivalent for ATF22V10CQZ-20PC?
The ATF22V10CZ-20PC is the closest same-manufacturer equivalent because it retains the 20 ns speed designation, 10-macrocell ATF22V10 architecture, 5 V supply, and 24-pin PDIP package. The suffix change does not itself prove that every configuration file is interchangeable, so compare the pin table, supported programming mode, and timing requirements. For legacy production, also request documentation supporting the proposed manufacturer cross-reference.

엔지니어링 참조 데이터: ATF22V10CQZ-20PC — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the ATF22V10CQZ-20PC when maintaining a CQZ-family legacy design where the 20 ns speed grade, 10-macrocell architecture, 5 V supply, 24-pin PDIP footprint, and existing configuration must remain unchanged. Select ATF22V10CZ-20PC for a new 24-pin DIP implementation after validating the suffix-level configuration and qualification differences. ATF22V10CZ-15PC offers a 5 ns faster speed grade when additional timing margin is useful, while ATF22V10CZ-25PC is 5 ns slower and requires timing revalidation. Use ATF22V10CQZ-20PI or ATF22V10CZ-20PI when a distinct temperature-grade suffix is required and the manufacturer confirms interchangeability. Because every candidate shares a 24-pin PDIP footprint, mechanical fit alone is not sufficient; review pin functions, programmed mode, temperature range, timing, and factory-programming requirements before substitution. For entirely new products, compare the PLD with an MCU or CPLD when long-term programming-tool support and broader logic capacity are more important than preserving a legacy DIP board.

대체품과의 비교

파라미터 이 제품 ATF22V10CZ-20PC ATF22V10CZ-15PC ATF22V10CZ-25PC ATF22V10CQZ-20PI ATF22V10CZ-20PI
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 24-PDIP 24-PDIP 24-PDIP 24-PDIP 24-PDIP 24-PDIP
Device Type Electrically erasable CMOS PLD Electrically erasable CMOS PLD Electrically erasable CMOS PLD Electrically erasable CMOS PLD Electrically erasable CMOS PLD Electrically erasable CMOS PLD
Macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells
Outputs 10 outputs 10 outputs 10 outputs 10 outputs 10 outputs 10 outputs
Product Terms per Output 8 to 16 product terms 8 to 16 product terms 8 to 16 product terms 8 to 16 product terms 8 to 16 product terms 8 to 16 product terms
Speed Grade 20 ns 20 ns 15 ns 25 ns 20 ns 20 ns
Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
Configuration Technology Electrically erasable flash memory Electrically erasable flash memory Electrically erasable flash memory Electrically erasable flash memory Electrically erasable flash memory Electrically erasable flash memory

주요 차별점

  • Direct 24-pin DIP family replacement without changing the PCB footprint (vs ATF22V10CQZ-20PI)
  • Exact 20 ns speed-grade match (vs ATF22V10CZ-15PC)
  • Lower nominal propagation delay than a 25 ns replacement (vs ATF22V10CZ-25PC)
  • Nonvolatile, reprogrammable configuration for maintainable legacy designs (vs ATF22V10CZ-20PC)

설계 노트

Design the board around the manufacturer’s 24-pin PDIP footprint and verify every signal against the ATF22V10C(Q)Z pin-description table. Legacy PLDs can assign several pins differently depending on the programmed mode, so do not infer enable, feedback, clock, or output-control functions from a generic logic symbol. Keep the PCB modifications and programming documentation under configuration control, because a mechanically compatible replacement may require a different fuse or configuration file.

Place the required supply-decoupling capacitor close to the 5 V and ground pins, and follow the manufacturer’s recommended network and layout. The device’s zero standby power specification does not eliminate dynamic switching current or supply-transient requirements. When replacing an existing board, inspect electrolytic capacitors and contaminated sockets because aging in legacy equipment can produce voltage excursions that affect a new PLD even when the original logic margin was adequate.

Do not select a substitute solely from the package drawing. Confirm pin functions, operating mode, speed grade, supply limits, temperature range, and whether the original device was factory programmed. For ATF22V10CZ-15PC or ATF22V10CZ-25PC substitutions, check worst-case timing rather than assuming a faster part always passes and a slower part always fails. Preserve the original programming file and validate the complete board after reprogramming.

Use short, direct traces for the PLD and avoid routing high-current or high-edge-rate signals adjacent to input pins and configuration lines. Legacy through-hole boards may have long loops that increase susceptibility to coupling, so inspect continuity, solder-joint integrity, and grounding during repair. If the board is refreshed, maintain a solid ground plane, decouple the supply locally, and keep programming or test access available for lifecycle maintenance.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The manufacturer product page and datasheet excerpts do not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because this is a legacy programmable logic device rather than an automotive-qualified device.

데이터 검증일: 2026-11-17 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

atf22v10cqz datasheet ATF22V10CQZ-20PC datasheet ATF22V10CQZ-20PC datasheet pdf ATF22V10CQZ-20PC pinout ATF22V10CQZ-20PC equivalent ATF22V10CQZ-20PC replacement ATF22V10CQZ-20PC cross reference ATF22V10CQZ-20PC vs ATF22V10CZ-20PC Microchip ATF22V10CQZ-20PC ATF22V10CQZ-20PC 24-PDIP ATF22V10CQZ-20PC price ATF22V10CQZ-20PC stock

관련 부품 & 용어

Microchip Technology ATF22V10CQZ-20PC ATF22V10CZ-20PC ATF22V10CZ-15PC ATF22V10CZ-25PC ATF22V10CQZ-20PI ATF22V10CZ-20PI ATF22V10CQZ ATF22LV10C-10SU Programmable Logic Device PLD Electrically Erasable Flash PLD EEPLD CMOS Combinational Logic State Machine 10 Macrocells Product Terms 24-PDIP DIP Package Through-Hole Mounting Zero Standby Power 5 V Supply 20 ns Speed Grade
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기