Microchip Technology

ATMEGA8L-8MI - 8-Bit 8MHz AVR MCU | Microchip Technology

MPN: ATMEGA8L-8MI ✓ সক্রিয়
3 V Vdss 32-VQFN (5x5 mm) Package 8 MHz Speed 8 KB Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ATMEGA8L-8MI সারাংশ

The Microchip Technology ATMEGA8L-8MI is an 8-bit AVR RISC microcontroller with 8KB of Flash program memory, 1KB of SRAM, and a 3V operating supply in a 32-VQFN (5x5 mm) package. It operates at up to 8MHz and integrates a 10-bit, 8-channel ADC together with I2C, SPI, and UART/USART interfaces.

An AVR microcontroller is a compact embedded-control semiconductor that executes instructions from nonvolatile Flash memory and uses SRAM for working data. The ATmega8L family belongs to the 8-bit MCU segment of the broader embedded processor hierarchy. Its mix of digital I/O, serial communications, analog conversion, and modest memory makes it suitable for compact controllers, sensor interfaces, and embedded control products.

Key features include 8KB of self-programming Flash, 512 bytes of EEPROM, and 1KB of internal SRAM. The device provides 130 instructions, eight general-purpose working registers, and an eight-channel 10-bit ADC. I2C supports connection to sensors and configuration devices, SPI supports higher-speed peripherals, and UART/USART enables serial communication with host systems or other embedded controllers.

The ATmega8L-8MI uses the AVR RISC architecture and provides a low-power CMOS implementation suited to embedded control. Its 3V supply requirement supports battery-operated and compact industrial systems. Compared with larger 16- and 32-bit microcontrollers, the device provides a lower-complexity control architecture with limited memory and processing capacity, making firmware design and verification comparatively straightforward.

Typical uses include low-speed sensor hubs, small motor-control boards, industrial interface modules, programmable control panels, and communication bridges. The ADC supports analog monitoring, while the three serial interfaces allow a compact board to connect sensors, storage devices, and service ports without requiring several separate interface components.

Designers should preserve the exposed-pad land pattern and follow the manufacturer's thermal and layout guidance for the 32-VQFN package. Firmware must also account for the ATmega8 and ATmega88 register differences identified in Microchip application note AVR094. Confirm ADC references, clock requirements, and peripheral pin assignments in the ATmega8/L datasheet before PCB release.

This page combines the manufacturer datasheet, distributor package information, practical design guidance, and verified same-footprint replacement information. It also organizes application fit, interface requirements, and migration considerations so engineers can assess the ATMEGA8L-8MI before committing a compact embedded-control design to this device.

এর জন্য ড্রপ-ইন বিকল্প ATMEGA8L-8MI — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible ATMEGA8L-8MI (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Product Type.

Microchip Technology
Package: 32-VQFN, 5 mm × 5 mm
Product Type: 8-bit AVR RISC-based microcontroller
এর সাথে তুলনা করুন ATMEGA8L-8MI →

ATMEGA8L-8MU

✅ ড্রপ-ইন
Microchip Technology
📦 32-VQFN (5x5 mm)
8-bit AVR RISC-based microcontroller · 8 MHz · 8 KB Flash · 4K × 16 bits · 512 bytes · 1 KB · 23 · 32

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATMEGA8L-8MI সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type 8-bit RISC microcontroller
Architecture AVR RISC
সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি 8 MHz
Flash Program Memory 8 KB
Flash Organization 4K x 16
Internal SRAM 1 KB
EEPROM 512 bytes
ADC Resolution 10 bits
ADC Channels 8 channels
সাপ্লাই ভোল্টেজ 3 V
Serial Interfaces I2C, SPI, UART/USART
General-Purpose Registers 8 registers
Instruction Set 130 instructions
প্যাকেজ 32-VQFN (5x5 mm)
Package Type Quad Flat No-Lead with exposed pad
মাউন্টিং টাইপ Surface mount

ATMEGA8L-8MI quad flat no-lead with exposed pad পিন কনফিগারেশন গাইড

ATMEGA8L-8MI (quad flat no-lead with exposed pad প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

ATMEGA8L-8MI-এর জন্য quad flat no-lead with exposed pad প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ATMEGA8L-8MI.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ATMEGA8L-8MI এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Low-Voltage Sensor Controller, Industrial Interface Module, Small Motor and Actuator Control, Programmable Control Panel, Communication Bridge, Battery-Powered Embedded Device.

🧩

Low-Voltage Sensor Controller

The ATMEGA8L-8MI fits a compact 3V sensor controller because its eight-channel 10-bit ADC can monitor several analog inputs while 1KB of SRAM handles short-lived measurement and control data. I2C can connect compatible sensors, and UART/USART can provide a service or data link. The 8KB Flash capacity is adequate for compact acquisition and threshold-control firmware, although designers should reserve space for bootloader functions and confirm the final linked image size.

🏭

Industrial Interface Module

A 3V industrial interface module can use the ATMEGA8L-8MI to consolidate protocol conversion, digital inputs, and analog monitoring. I2C supports low-speed embedded peripherals, SPI supports higher-speed devices, and UART/USART handles a host connection without requiring additional interface controllers. The industrial ATmega8L ordering is appropriate where extended-temperature production requirements apply, but the final board must preserve the 32-VQFN exposed-pad layout and follow the manufacturer's layout guidance.

🔧

Small Motor and Actuator Control

The ATMEGA8L-8MI can coordinate small motors, relays, and actuators where an 8MHz control rate is sufficient. Its GPIO and timers support deterministic sequencing, while I2C can communicate with sensor or driver ICs and UART/USART can accept higher-level commands. Because the MCU provides no integrated power stage, external transistors or driver circuits remain necessary, and current limits, flyback protection, grounding, and thermal margins should be designed around those external components.

📺

Programmable Control Panel

The ATMEGA8L-8MI can serve as the controller in a compact programmable panel with local inputs, status indication, and a service port. Its 1KB of SRAM is suitable for short command buffers and state variables, while 512 bytes of EEPROM can retain configuration settings. The 10-bit ADC can monitor a potentiometer or sensor, and UART/USART can connect to a host. Firmware size should be checked carefully because the available 8KB of Flash leaves limited space for graphics libraries and extensive protocol stacks.

🌐

Communication Bridge

The ATMEGA8L-8MI is useful in a small communication bridge because it combines three serial interfaces—UART/USART, SPI, and I2C—in one controller. A board can translate between a host serial port and a sensor bus, or coordinate a local SPI peripheral while exposing I2C connectivity. At 8MHz, the device is appropriate for modest message rates and control-oriented traffic rather than high-bandwidth protocol bridging, so designers should calculate interrupt load and worst-case serial throughput.

⚡

Battery-Powered Embedded Device

The ATmega8L-8MI supports a 3V battery-powered embedded design by combining low-power operation with integrated analog and serial peripherals. The low-power ATmega8L family is suited to intermittent sensing, local threshold decisions, and periodic host communication. The 512-byte EEPROM can preserve limited settings, while sleep-mode behavior and clock configuration can reduce average energy use. Battery life still depends on the external sensor, load-switching circuit, regulator efficiency, and the selected firmware sleep strategy.

What is the operating voltage of ATMEGA8L-8MI?
The ATMEGA8L-8MI operates from a 3V supply. According to the Microchip Technology ATmega8/L datasheet, the low-power ATmega8L architecture is intended for lower-voltage embedded-control systems. Designers should use the datasheet's complete electrical-characteristics table when selecting the operating range, regulator tolerance, decoupling network, and input thresholds for the exact board conditions.
What are the key specifications of ATMEGA8L-8MI that engineers should know?
The ATMEGA8L-8MI combines an 8MHz AVR RISC core with 8KB of Flash, 1KB of SRAM, 512 bytes of EEPROM, and an eight-channel 10-bit ADC. It also provides I2C, SPI, and UART/USART interfaces in a 32-VQFN 5x5 mm package. According to the Microchip Technology ATmega8/L datasheet, these resources support compact embedded-control, analog-monitoring, and serial-communication designs.
Where can I download the ATMEGA8L-8MI datasheet PDF?
The ATMEGA8L-8MI datasheet PDF is available from Microchip Technology through the official ATmega8/L datasheet link on this page. According to Microchip Technology, the document covers the ATmega8 and ATmega8L devices, including the 8-bit AVR architecture, memory, ADC, serial peripherals, electrical characteristics, and package information. Use the manufacturer document for design sign-off.
Where can I find the ATMEGA8L-8MI pinout?
The ATMEGA8L-8MI pin assignments and exposed-pad layout are defined in the Microchip Technology ATmega8/L datasheet. The device is packaged as a 32-VQFN with a 5x5 mm body and exposed thermal pad. Use the datasheet pin-configuration table when assigning port pins, power connections, analog inputs, reset, clock, and programming signals.
What can replace the ATMEGA8L-8MI on the same PCB footprint?
The ATMEGA8L-8MU is the closest documented same-package alternative because it retains the 32-VQFN footprint and 8MHz operating class. Its ordering suffix differs, so engineers should verify temperature grade, qualification, and procurement details before substitution. Microchip application note AVR094 warns that some ATmega8 I/O registers are not functionally equivalent to ATmega88 equivalents, making register-level review essential for migrations.
Is ATMEGA8L-8MI the same as ATMEGA8L-8MU?
The ATMEGA8L-8MI and ATMEGA8L-8MU are closely related 8MHz ATmega8L devices, but their ordering suffixes identify different orderable configurations. The ATMEGA8L-8MI is the industrial-temperature 32-VQFN ordering shown in distributor records, whereas the ATMEGA8L-8MU is a documented alternate ordering. Confirm the exact suffix, temperature grade, and packaging details against the manufacturer documentation before treating them as interchangeable.
ATMEGA8L-8MI vs ATMEGA8L-8MU: which is better for an industrial design?
The ATMEGA8L-8MI is generally the preferred ordering for an industrial-temperature design when that grade is required by the application. The ATMEGA8L-8MU offers a close 8MHz and 32-VQFN alternative, but its suffix-specific temperature and qualification conditions must be checked. According to Microchip ordering information, component identity is determined by the complete part number, not only by memory and clock ratings.
When should I choose ATMEGA8L-8MI over ATMEGA8L-8MU?
Choose the ATMEGA8L-8MI when the complete approved ordering specifies the industrial-grade suffix or when your qualification records require that exact MPN. Consider the ATMEGA8L-8MU only after confirming that its temperature range, qualification, and orderable package satisfy the product requirements. Both devices target the same 8MHz ATmega8L resource class and 32-VQFN footprint, so the suffix and production requirements are the decisive checks.
Is ATMEGA8L-8MI suitable for a low-voltage sensor controller?
The ATMEGA8L-8MI is suitable for a low-voltage sensor controller because it operates from 3V and integrates an eight-channel 10-bit ADC, 1KB of SRAM, and 512 bytes of EEPROM. I2C can serve common digital sensors while UART/USART handles a host connection. Its 8KB Flash limit makes the device best suited to compact control logic rather than large data logging or graph-processing workloads.
How much memory does the ATMEGA8L-8MI provide?
The ATMEGA8L-8MI provides 8KB of self-programming Flash, 1KB of internal SRAM, and 512 bytes of EEPROM. According to the Microchip Technology ATmega8/L datasheet, the Flash memory stores the application program, SRAM supports working data and stack operations, and EEPROM retains parameters without continuous power. This partitioning should be checked against the compiled firmware size and interrupt requirements.
What peripherals are built into the ATMEGA8L-8MI?
The ATMEGA8L-8MI integrates an eight-channel 10-bit ADC, I2C, SPI, UART/USART, timers, and GPIO in one microcontroller. According to the Microchip Technology ATmega8/L datasheet, these peripherals support analog sensing, sensor buses, external data storage, service-port communications, timing, and direct control of external circuitry. Pin multiplexing must be checked against the target board.
Does the ATMEGA8L-8MI require an external crystal for 8MHz operation?
The ATMEGA8L-8MI supports operation up to 8MHz, but the correct clock arrangement depends on the design's timing, power, and EMI requirements. The ATmega8/L datasheet describes internal and external clock options. Select the fuse and clock circuit for the intended operating mode, and verify startup, reset, and clock accuracy before releasing the PCB.
What is the lifecycle status of ATMEGA8L-8MI?
The ATMEGA8L-8MI is currently treated as an active ordering for this product record. Distributor product pages continue to list the exact MPN, including its 8-bit AVR type, 8MHz speed, 8KB Flash, and 32-VQFN package. For production risk control, request the current lifecycle, PCN, and traceability status through the Request a Quote form on this page.
Where can I buy ATMEGA8L-8MI online?
Use the Request a Quote form on this page to request ATMEGA8L-8MI supply, current lead time, and order confirmation for the exact 32-VQFN MPN. The product is listed under the industrial ATmega8L-8MI ordering, so confirm the suffix and package markings when the quotation is returned. For prototype or production planning, include the required quantity, date code policy, and target shipment date.
What is the price and lead time of ATMEGA8L-8MI?
Current ATMEGA8L-8MI pricing and lead time should be confirmed through the Request a Quote form on this page. The exact request should identify the industrial ATMEGA8L-8MI suffix, 32-VQFN package, quantity, and required shipment timing. This avoids ordering a superficially similar ATmega8L configuration whose temperature grade or ordering suffix differs from the approved BOM.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ATMEGA8L-8MI — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the ATMEGA8L-8MI for compact 3V embedded-control designs that need an 8MHz AVR core, 8KB of Flash, 1KB of SRAM, and integrated analog and serial functions. Its industrial ordering is appropriate when the product specification requires that grade. The ATMEGA8L-8MU is the closest documented same-footprint alternative and is reasonable when its complete suffix-specific temperature and qualification conditions meet the product requirements. Neither option provides the memory or processing headroom of larger 16- or 32-bit microcontrollers, so firmware must remain focused on control, acquisition, and protocol tasks. Consider a different device family when the application requires substantially more Flash, higher processing throughput, USB, or a larger pin count; those changes require a new footprint and software review rather than a drop-in substitution.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ATMEGA8L-8MU
Package 32-VQFN (5x5 mm) 32-VQFN (5x5 mm)
Brand Microchip Technology Microchip Technology
Maximum Clock Frequency 8 MHz 8 MHz

মূল পার্থক্যসমূহ

  • Exact industrial ATmega8L ordering with integrated mixed-signal peripherals (বনামATMEGA8L-8MU)
  • Three serial interfaces consolidated in one 8-bit MCU (বনামATMEGA8L-8MU)
  • Compact 5x5 mm surface-mount implementation (বনামATMEGA8L-8MU)

ডিজাইন নোট

Route the 32-VQFN exposed pad according to the ATmega8/L land-pattern and thermal-via guidance in the manufacturer datasheet. A compliant footprint is essential for assembly and heat transfer. Confirm the exposed-pad net assignment, pad dimensions, solder-mask opening, and via pattern against the current PCB library before release; a visually similar 32-pin QFN footprint may not match the exact body and pad geometry.

Build the 3V power rail with low-noise local decoupling and account for AVR reset requirements during brownout and power-up. Follow the datasheet's recommended capacitor values and placement, including the separation between regulator output and the MCU supply pins. Estimate the board's peak current before choosing the regulator so the ADC, communications peripherals, external loads, and capacitor charging do not create supply droop during startup.

Do not treat ATmega8 and ATmega88 as register-compatible without review. Microchip application note AVR094 identifies I/O registers whose functions differ and provides a migration table. Before substituting an ATmega88-family device, map interrupt vectors, timer registers, ADC behavior, port functions, and fuse settings, then recompile and retest the application rather than changing only the device marking.

Keep analog inputs away from fast-switching nets and route them over a continuous ground reference. The ADC uses 10-bit resolution, but practical accuracy still depends on reference-voltage stability, source impedance, sampling time, and layout. Use the datasheet's ADC input guidance and consider local reference filtering when measuring low-amplitude or high-source-impedance signals.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The industrial identifier is part of the ordering information for ATMEGA8L-8MI. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was included in the cited product records, so these fields remain unknown.

ডেটা যাচাই করা হয়েছে: 2026-11-09 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

atmega8l pinout atmega8l datasheet atmega8l 8pu datasheet atmega8l 8pu pinout atmega8l 8au datasheet atmega8l 8aur ATMEGA8L-8MI datasheet PDF ATMEGA8L-8MI pinout ATMEGA8L-8MI equivalent ATMEGA8L-8MI replacement ATMEGA8L-8MI vs ATMEGA8L-8MU ATMEGA8L-8MI 32-VQFN footprint ATMEGA8L-8MI price ATMEGA8L-8MI stock Microchip ATMEGA8L-8MI

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology ATMEGA8L-8MI ATMEGA8L-8MU ATmega8 ATmega8L ATmega88 AVR AVR RISC architecture 8-bit microcontroller embedded microcontroller semiconductor self-programming Flash memory SRAM EEPROM ADC 10-bit ADC I2C SPI UART/USART 32-VQFN QFN package family surface-mount package low-power CMOS 3V microcontroller Microchip AVR094 application note
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন