ATSAML10D14A-YU - 32MHz Cortex-M23 MCU | Microchip
MPN: ATSAML10D14A-YU ✓ সক্রিয়ATSAML10D14A-YU সারাংশ
A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals such as analog converters, timers, serial interfaces, and touch sensing in one device. Within the product hierarchy, the ATSAML10D14A-YU is an Arm Cortex-M23 microcontroller, a 32-bit reduced-instruction-set controller, and part of the broader embedded processor and power management ecosystem.
Key device features include a 32 MHz maximum clock, 16 KB flash organized as 16K x 8, 4 KB SRAM, enhanced peripheral touch controller support, SERCOM serial interfaces, and advanced analog resources. The integrated analog feature set includes a 12-bit ADC, a DAC, an operational amplifier, and an analog comparator. The manufacturer describes active-mode consumption below 25 uA/MHz and sleep-mode consumption below 100 nA.
The Arm Cortex-M23 core uses the Thumb instruction set and provides event-system support for deterministic, low-power peripherals. Its compact 24-SSOP package measures 5.30 mm wide and 0.209 inch across the lead span, making the device suitable for dense industrial control, sensing, and security-oriented embedded designs. Operating temperature spans -40 C to +85 C.
Typical applications include capacitive-touch user interfaces, low-power sensor nodes, smart access controls, compact industrial controllers, and battery-operated IoT devices. The small memory footprint suits applications that perform protocol handling, local filtering, and peripheral control without an external memory interface.
Designers should reserve all VDD and VSS pins for adequate decoupling, keep analog inputs away from fast switching nets, and follow the recommended external-component values in the manufacturer datasheet. Confirm the exact pin multiplexing, ADC reference arrangement, and peripheral pin assignments in the pin-description table before laying out the PCB.
This page consolidates the device specifications, lifecycle information, sourcing options, and engineering considerations into one technical reference. It also compares the ATSAML10D14A-YU with other verified SAM L10 orderable configurations and identifies the design constraints that matter most when selecting a 24-SSOP Arm Cortex-M23 microcontroller.
এর জন্য ড্রপ-ইন বিকল্প ATSAML10D14A-YU — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।
বিকল্প অনুরোধ করুনATSAML10D14A-YU সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | 32-bit ARM Cortex-M23 Microcontroller |
| Series | SAM L10 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 KB (16K x 8) |
| SRAM | 4 KB |
| Processor Core | Arm Cortex-M23 |
| Architecture | 32-bit |
| প্যাকেজ | 24-SSOP (0.209 inch, 5.30 mm width) |
| অপারেটিং তাপমাত্রার পরিসর | -40 C to +85 C |
| Active Mode Current | Less than 25 uA/MHz |
| Sleep Mode Current | Less than 100 nA |
| ADC Resolution | 12 bit |
| Analog Peripherals | ADC, DAC, operational amplifier, and analog comparator |
| Serial Interfaces | SERCOM |
| Touch Controller | Enhanced peripheral touch controller |
| Smart Card Interface | ISO7816 smart card interface |
| মাউন্টিং টাইপ | Surface mount |
| পিনের সংখ্যা | 24 |
ATSAML10D14A-YU 24-ssop (0.209 inch, 5.30 mm width) পিন কনফিগারেশন গাইড
ATSAML10D14A-YU (24-ssop (0.209 inch, 5.30 mm width) প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ATSAML10D14A-YU.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
ATSAML10D14A-YU এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Battery-Powered Sensor Node, Capacitive-Touch User Interface, Smart Access Control Terminal, Compact Industrial Control Module, Connected IoT Edge Node, Precision Analog Controller.
Battery-Powered Sensor Node
The ATSAML10D14A-YU fits battery-operated sensor nodes that periodically wake, acquire measurements, and return to a low-power state. Its Arm Cortex-M23 core runs at up to 32 MHz while consuming less than 25 uA/MHz in active mode, and the manufacturer specifies sleep-mode current below 100 nA. The integrated 12-bit ADC can read resistive, voltage-divider, or external sensor outputs without a separate converter. Use the SERCOM peripherals for a compact wired sensor bus and select an external sensor whose standby current matches the application's duty cycle. Board-level leakage, regulator quiescent current, and the interval between wake events will usually determine total battery life more than the MCU alone.
সুপারিশকৃত
Capacitive-Touch User Interface
The ATSAML10D14A-YU is suitable for compact capacitive-touch controls because Microchip identifies an enhanced peripheral touch controller among its integrated features. The controller can scan external capacitive pads while the Cortex-M23 core handles debouncing, gestures, lighting, and serial reporting. Its 32 MHz clock provides sufficient response margin for short touch scans, and the 16 KB flash plus 4 KB SRAM accommodate a focused interface firmware without an external storage device. Keep touch traces short, keep them away from high-current switching paths, and follow the recommended grounding and shielding techniques. The 24-SSOP package also allows the controller to be placed close to the touch electrode area.
সুপারিশকৃত
Smart Access Control Terminal
The ATSAML10D14A-YU can serve as the controller in a compact credential-reading or access-control terminal. Microchip lists an ISO7816 smart card interface among the device capabilities, allowing a design to combine card detection, communication, indicator control, and local event handling in one MCU. The Cortex-M23 core operates at up to 32 MHz, while 4 KB of SRAM is sufficient for short protocol frames and control state. Confirm the required card-interface pin multiplexing and electrical timing in the manufacturer data sheet. Security deployments should also apply the appropriate system-level authentication, key-storage, and update practices rather than treating the MCU alone as the complete security solution.
সুপারিশকৃত
Compact Industrial Control Module
The ATSAML10D14A-YU supports small industrial control modules that combine sensor monitoring, actuator control, and a local communications link. Its 12-bit ADC, DAC, operational amplifier, comparator, and SERCOM interfaces allow a designer to consolidate several discrete functions into a compact 24-SSOP design. The 32 MHz Cortex-M23 core provides deterministic control execution, while the event system can help coordinate peripheral timing without relying entirely on software polling. For industrial deployments, verify the -40 C to +85 C operating range against the enclosure temperature, isolate analog and digital grounds according to the recommended layout, and add surge protection on any externally accessible lines.
সুপারিশকৃত
Connected IoT Edge Node
The ATSAML10D14A-YU can act as the low-power edge controller in an IoT node that monitors local inputs and forwards compact status information to a network or host processor. The SERCOM interfaces support resource-efficient serial connectivity, while the small 16 KB flash and 4 KB SRAM are appropriate for protocol endpoints that do not run a large networking stack. Low-power operation below 25 uA/MHz in active mode and below 100 nA in sleep mode helps preserve energy budget during intermittent connectivity. Choose a radio or transceiver with a compatible interface and pin mapping, and keep the MCU in its lowest useful sleep state whenever radio activity is not required.
সুপারিশকৃত
Precision Analog Controller
The ATSAML10D14A-YU is useful in analog control loops where a dedicated controller would add unnecessary cost and board area. The 12-bit ADC measures control inputs, the DAC generates a reference voltage, the integrated operational amplifier buffers or conditions the error signal, and the analog comparator provides fast threshold monitoring. Running the loop on the Cortex-M23 core at up to 32 MHz allows digital filtering and compensation to supplement the analog path. Keep the converter and amplifier reference arrangement clean, observe the specified acquisition-time requirements, and verify loop stability across temperature using the manufacturer's electrical characteristics and recommended component values.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ATSAML10D14A-YU — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য |
|---|---|
| Package | 24-SSOP (0.209 inch, 5.30 mm width) |
| Brand | Microchip Technology |
| Processor Core | Arm Cortex-M23 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 KB |
| SRAM | 4 KB |
| ADC Resolution | 12 bit |
| Operating Temperature Range | -40 C to +85 C |
মূল পার্থক্যসমূহ
- Ultra-low-power Cortex-M23 performance (বনামGeneral-purpose 32 MHz Arm Cortex-M23 microcontrollers)
- Integrated analog and touch resources (বনামMCUs requiring external converters and touch controllers)
- Compact 24-SSOP footprint (বনামLarger 24-pin VQFN options in the same product family)
ডিজাইন নোট
Estimated: at a 3.3 V supply and an average active current of 25 uA/MHz at 32 MHz, the processor core consumes approximately 0.8 mA during full-rate operation before peripheral and IO loading. The calculation uses 32 MHz x 25 uA/MHz = 0.8 mA and 3.3 V x 0.8 mA = 2.64 mW. Actual board power is higher once GPIO, analog blocks, the event system, and external regulator losses are included, so measure the assembled product in its real operating states.
Place every VDD or VDDCORE connection adjacent to its matching ground return and decouple each supply according to the manufacturer pinout and layout guidance. Keep the 24-SSOP footprint within the board outline, use the recommended lead length and paste mask, and avoid placing high-current switching nodes beneath the device. Separate analog inputs from serial and switching traces so that the 12-bit ADC and comparator retain usable signal integrity in the final assembly.
Do not substitute another ATSAML10D14A ordering code without checking both the package drawing and pin multiplexing. A different package suffix can require a different land pattern, while a change in shipping suffix affects reel or tray handling rather than electrical compatibility. Confirm the exact suffix, VDDCORE and VDDIO requirements, programming pins, peripheral assignments, and operating-temperature grade in the manufacturer documentation before releasing the PCB for fabrication.
কমপ্লায়েন্স তথ্য
The Microchip ATSAML10D14A is an industrial-temperature microcontroller in the -40 C to +85 C range. Formal RoHS, REACH, halogen-free, and conflict-minerals declarations should be confirmed through the manufacturer's current product-compliance documentation for the exact ordering code.