Microchip Technology

ATSAML10D14A-YU - 32MHz Cortex-M23 MCU | Microchip

MPN: ATSAML10D14A-YU ✓ Hoạt động
Less than 25 uA/MHz Id 24-SSOP (0.209 inch, 5.30 mm width) Package 32 MHz Speed 16 KB (16K x 8) Memory
MOQ: 1 |

ATSAML10D14A-YU Tóm tắt

The Microchip Technology ATSAML10D14A-YU is a 32-bit Arm Cortex-M23 microcontroller operating at up to 32 MHz, with 16 KB of flash memory, 4 KB of SRAM, and a 24-SSOP package. It belongs to the SAM L10 family of low-power embedded microcontrollers designed for compact battery-powered, industrial, and connected-edge systems.

A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals such as analog converters, timers, serial interfaces, and touch sensing in one device. Within the product hierarchy, the ATSAML10D14A-YU is an Arm Cortex-M23 microcontroller, a 32-bit reduced-instruction-set controller, and part of the broader embedded processor and power management ecosystem.

Key device features include a 32 MHz maximum clock, 16 KB flash organized as 16K x 8, 4 KB SRAM, enhanced peripheral touch controller support, SERCOM serial interfaces, and advanced analog resources. The integrated analog feature set includes a 12-bit ADC, a DAC, an operational amplifier, and an analog comparator. The manufacturer describes active-mode consumption below 25 uA/MHz and sleep-mode consumption below 100 nA.

The Arm Cortex-M23 core uses the Thumb instruction set and provides event-system support for deterministic, low-power peripherals. Its compact 24-SSOP package measures 5.30 mm wide and 0.209 inch across the lead span, making the device suitable for dense industrial control, sensing, and security-oriented embedded designs. Operating temperature spans -40 C to +85 C.

Typical applications include capacitive-touch user interfaces, low-power sensor nodes, smart access controls, compact industrial controllers, and battery-operated IoT devices. The small memory footprint suits applications that perform protocol handling, local filtering, and peripheral control without an external memory interface.

Designers should reserve all VDD and VSS pins for adequate decoupling, keep analog inputs away from fast switching nets, and follow the recommended external-component values in the manufacturer datasheet. Confirm the exact pin multiplexing, ADC reference arrangement, and peripheral pin assignments in the pin-description table before laying out the PCB.

This page consolidates the device specifications, lifecycle information, sourcing options, and engineering considerations into one technical reference. It also compares the ATSAML10D14A-YU with other verified SAM L10 orderable configurations and identifies the design constraints that matter most when selecting a 24-SSOP Arm Cortex-M23 microcontroller.

Bộ thay thế dễ dàng lắp đặt cho ATSAML10D14A-YU — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

ATSAML10D14A-YU Tỷ lệ tối đa & tính chất điện

Product Type 32-bit ARM Cortex-M23 Microcontroller
Series SAM L10
Maximum CPU Frequency 32 MHz
Flash Memory 16 KB (16K x 8)
SRAM 4 KB
Processor Core Arm Cortex-M23
Architecture 32-bit
Hộp 24-SSOP (0.209 inch, 5.30 mm width)
Khoảng nhiệt độ hoạt động -40 C to +85 C
Active Mode Current Less than 25 uA/MHz
Sleep Mode Current Less than 100 nA
ADC Resolution 12 bit
Analog Peripherals ADC, DAC, operational amplifier, and analog comparator
Serial Interfaces SERCOM
Touch Controller Enhanced peripheral touch controller
Smart Card Interface ISO7816 smart card interface
Kiểu lắp đặt Surface mount
Số lượng chân 24

Hướng dẫn cấu hình chân ATSAML10D14A-YU 24-ssop (0.209 inch, 5.30 mm width)

Cấu hình chân cho ATSAML10D14A-YU (24-ssop (0.209 inch, 5.30 mm width) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 24-ssop (0.209 inch, 5.30 mm width) cho ATSAML10D14A-YU

Không có dữ liệu chân cụ thể sẵn có cho ATSAML10D14A-YU.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ATSAML10D14A-YU phù hợp cho 6 Áp dụngs: Battery-Powered Sensor Node, Capacitive-Touch User Interface, Smart Access Control Terminal, Compact Industrial Control Module, Connected IoT Edge Node, Precision Analog Controller.

🔋

Battery-Powered Sensor Node

The ATSAML10D14A-YU fits battery-operated sensor nodes that periodically wake, acquire measurements, and return to a low-power state. Its Arm Cortex-M23 core runs at up to 32 MHz while consuming less than 25 uA/MHz in active mode, and the manufacturer specifies sleep-mode current below 100 nA. The integrated 12-bit ADC can read resistive, voltage-divider, or external sensor outputs without a separate converter. Use the SERCOM peripherals for a compact wired sensor bus and select an external sensor whose standby current matches the application's duty cycle. Board-level leakage, regulator quiescent current, and the interval between wake events will usually determine total battery life more than the MCU alone.

🖱️

Capacitive-Touch User Interface

The ATSAML10D14A-YU is suitable for compact capacitive-touch controls because Microchip identifies an enhanced peripheral touch controller among its integrated features. The controller can scan external capacitive pads while the Cortex-M23 core handles debouncing, gestures, lighting, and serial reporting. Its 32 MHz clock provides sufficient response margin for short touch scans, and the 16 KB flash plus 4 KB SRAM accommodate a focused interface firmware without an external storage device. Keep touch traces short, keep them away from high-current switching paths, and follow the recommended grounding and shielding techniques. The 24-SSOP package also allows the controller to be placed close to the touch electrode area.

🔐

Smart Access Control Terminal

The ATSAML10D14A-YU can serve as the controller in a compact credential-reading or access-control terminal. Microchip lists an ISO7816 smart card interface among the device capabilities, allowing a design to combine card detection, communication, indicator control, and local event handling in one MCU. The Cortex-M23 core operates at up to 32 MHz, while 4 KB of SRAM is sufficient for short protocol frames and control state. Confirm the required card-interface pin multiplexing and electrical timing in the manufacturer data sheet. Security deployments should also apply the appropriate system-level authentication, key-storage, and update practices rather than treating the MCU alone as the complete security solution.

🏭

Compact Industrial Control Module

The ATSAML10D14A-YU supports small industrial control modules that combine sensor monitoring, actuator control, and a local communications link. Its 12-bit ADC, DAC, operational amplifier, comparator, and SERCOM interfaces allow a designer to consolidate several discrete functions into a compact 24-SSOP design. The 32 MHz Cortex-M23 core provides deterministic control execution, while the event system can help coordinate peripheral timing without relying entirely on software polling. For industrial deployments, verify the -40 C to +85 C operating range against the enclosure temperature, isolate analog and digital grounds according to the recommended layout, and add surge protection on any externally accessible lines.

🧩

Connected IoT Edge Node

The ATSAML10D14A-YU can act as the low-power edge controller in an IoT node that monitors local inputs and forwards compact status information to a network or host processor. The SERCOM interfaces support resource-efficient serial connectivity, while the small 16 KB flash and 4 KB SRAM are appropriate for protocol endpoints that do not run a large networking stack. Low-power operation below 25 uA/MHz in active mode and below 100 nA in sleep mode helps preserve energy budget during intermittent connectivity. Choose a radio or transceiver with a compatible interface and pin mapping, and keep the MCU in its lowest useful sleep state whenever radio activity is not required.

📈

Precision Analog Controller

The ATSAML10D14A-YU is useful in analog control loops where a dedicated controller would add unnecessary cost and board area. The 12-bit ADC measures control inputs, the DAC generates a reference voltage, the integrated operational amplifier buffers or conditions the error signal, and the analog comparator provides fast threshold monitoring. Running the loop on the Cortex-M23 core at up to 32 MHz allows digital filtering and compensation to supplement the analog path. Keep the converter and amplifier reference arrangement clean, observe the specified acquisition-time requirements, and verify loop stability across temperature using the manufacturer's electrical characteristics and recommended component values.

What is the ATSAML10D14A-YU?
The ATSAML10D14A-YU is a 32-bit Arm Cortex-M23 microcontroller from the Microchip SAM L10 family, with a maximum clock of 32 MHz, 16 KB of flash memory, and 4 KB of SRAM. According to the Microchip ATSAML10D14A product page, the device also provides enhanced peripheral touch controller support, advanced analog resources, and an ISO7816 smart card interface. It is supplied in a 24-SSOP package measuring 0.209 inch across the lead span and 5.30 mm wide.
What is the maximum operating frequency of ATSAML10D14A-YU?
The ATSAML10D14A-YU operates at up to 32 MHz using an Arm Cortex-M23 processor core. The manufacturer describes the part as an industry's first and lowest-power Cortex-M23 MCU, consuming less than 25 uA/MHz in active mode. This operating point supports responsive control loops and communication tasks while remaining suitable for low-duty-cycle embedded systems. Confirm the clock source, divider settings, and power configuration in the manufacturer datasheet when planning the system timing budget.
How much flash and SRAM does the ATSAML10D14A-YU have?
The ATSAML10D14A-YU provides 16 KB of flash memory, organized as 16K x 8, together with 4 KB of SRAM. The Mouser product listing identifies the microcontroller specifically by these memory capacities. This combination is suitable for compact firmware with protocol handling, touch scanning, and peripheral control, although applications requiring large image buffers, extensive logging, or a substantial operating system should account for the limited on-chip memory.
What peripherals are built into the ATSAML10D14A-YU?
The ATSAML10D14A-YU integrates a 12-bit ADC, DAC, operational amplifier, analog comparator, SERCOM serial interfaces, and an enhanced peripheral touch controller. Microchip also identifies an ISO7816 smart card interface among the device capabilities. These peripherals reduce the need for external converters and interface ICs in sensing, analog control, communication, and secure-access designs. Use the manufacturer pin-description table to confirm the available multiplexing for each signal.
What package does the ATSAML10D14A-YU use?
The ATSAML10D14A-YU is packaged in a 24-SSOP package measuring 0.209 inch across the lead span and 5.30 mm wide. The package is intended for surface-mount assembly and offers a narrow alternative to larger QFN and TQFP options when board area is constrained. Use a 24-SSOP land pattern with the manufacturer's recommended pad dimensions and paste mask rather than adapting a generic SSOP footprint by visual comparison.
Where can I download the ATSAML10D14A-YU datasheet?
The ATSAML10D14A-YU datasheet and supporting documents are available from the official Microchip ATSAML10D14A product page at https://www.microchip.com/en-us/product/ATSAML10D14A. Open the Documents tab to obtain the manufacturer data sheet and select the ordering information section to confirm package codes, pin options, and lifecycle details. The product page is also the authoritative starting point for software, errata, and reference documentation.
Where can I find the ATSAML10D14A-YU pinout?
The ATSAML10D14A-YU pinout is documented in the pin-description and pinout sections of the manufacturer data sheet available from the Microchip ATSAML10D14A product page. Use the 24-SSOP drawing to identify VDDCORE, VDDIO, ground, reset, programming, clock, and peripheral-signal positions. Do not assign analog, serial, or touch functions from memory because several pins support alternate peripheral mappings.
How much current does the ATSAML10D14A-YU consume in sleep mode?
The Microchip product page states that the ATSAML10D14A-YU consumes less than 100 nA in sleep mode. This figure is the manufacturer-defined sleep-mode condition rather than a guaranteed average for an assembled application. Actual board consumption depends on the selected sleep mode, retained peripheral state, regulator configuration, leakage paths, and external components. Measure the complete product board when validating a battery-life target.
Is the ATSAML10D14A-YU suitable for battery-powered sensor nodes?
The ATSAML10D14A-YU is well suited to battery-powered sensor nodes because its Arm Cortex-M23 core operates below 25 uA/MHz in active mode, while sleep-mode consumption is specified below 100 nA. The device also includes a 12-bit ADC, analog comparator, and operational amplifier for local sensing and signal conditioning. Low overall energy use still depends on the duty cycle, sensor standby current, analog reference strategy, and leakage of the assembled board.
What is the best use for the ATSAML10D14A-YU analog peripherals?
The ATSAML10D14A-YU is best used for local analog measurement, reference-voltage control, and signal conditioning in compact embedded systems. Its 12-bit ADC samples sensor outputs, while the DAC generates controlled analog voltage, the operational amplifier conditions higher-impedance signals, and the comparator supports threshold decisions. Connect analog inputs with short traces, use a clean reference arrangement, and follow the datasheet's guidance on ADC settling and acquisition time.
Where can I buy ATSAML10D14A-YU online?
ATSAML10D14A-YU can be sourced through authorized electronics distributors that list the exact 24-SSOP ordering code. Availability changes with market conditions, so use the Request a Quote form on this page to request current stock, volume pricing, and lead time for the exact MPN. When requesting a quote, specify the required quantity, date code preference, and whether reel or tray packing is needed for your production process.
What is the price of ATSAML10D14A-YU?
Current pricing for the ATSAML10D14A-YU depends on order quantity, inventory, date code, and requested packing format. Use the Request a Quote form on this page to obtain a current quotation for the exact 24-SSOP device. Provide your forecast quantities and target delivery schedule so procurement can confirm allocation and logistics rather than relying on a historical catalog price that may no longer reflect market availability.
What is the lead time for ATSAML10D14A-YU?
Lead time for the ATSAML10D14A-YU depends on current manufacturer and distributor inventory. Request the current lead time through the Request a Quote form on this page, and state the required quantity and production schedule. For new designs, schedule a small prototype purchase first and confirm packing requirements before committing to a multi-year production forecast.
Is the ATSAML10D14A-YU currently in stock?
Stock status for the ATSAML10D14A-YU can change rapidly because the device is offered by multiple distribution channels with different inventory positions. Use the Request a Quote form on this page to check current availability for the exact MPN and quantity. The quote request should include your required date code preference, annual usage, and packing format to help procurement identify the most practical supply route.
What can replace the ATSAML10D14A-YU?
A drop-in replacement for the ATSAML10D14A-YU must match the 24-SSOP footprint, pin multiplexing, operating voltage, peripheral configuration, and firmware requirements. Microchip's ATSAML10D14A family includes ordering codes that differ in package or shipping configuration, but changing the suffix can change the land pattern or reel-versus-tray handling. If you need a substitute, use the Request a Quote form on this page and specify whether the requirement is a true pin-to-pin replacement or simply an equivalent processor for a new PCB design.

Dữ liệu tham khảo kỹ thuật cho ATSAML10D14A-YU — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the ATSAML10D14A-YU when a compact, low-power control system needs an Arm Cortex-M23 core, 16 KB of flash, 4 KB of SRAM, and integrated analog and touch resources in a 24-SSOP package. It is a strong fit for battery-operated sensor nodes, capacitive-touch interfaces, small access-control terminals, and localized industrial controllers. Its 16 KB flash and 4 KB SRAM require careful firmware partitioning, so move to a higher-memory member when the design needs local data logging, a larger protocol stack, or an RTOS. Verify the exact pin multiplexing, supply arrangement, and package dimensions in the manufacturer documentation before layout, and use the Request a Quote form to confirm availability and production quantities for the exact ordering code.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Package 24-SSOP (0.209 inch, 5.30 mm width)
Brand Microchip Technology
Processor Core Arm Cortex-M23
Maximum CPU Frequency 32 MHz
Flash Memory 16 KB
SRAM 4 KB
ADC Resolution 12 bit
Operating Temperature Range -40 C to +85 C

Bảo phân biệt quan trọng

  • Ultra-low-power Cortex-M23 performance (vsGeneral-purpose 32 MHz Arm Cortex-M23 microcontrollers)
  • Integrated analog and touch resources (vsMCUs requiring external converters and touch controllers)
  • Compact 24-SSOP footprint (vsLarger 24-pin VQFN options in the same product family)

Ghi chú thiết kế

Estimated: at a 3.3 V supply and an average active current of 25 uA/MHz at 32 MHz, the processor core consumes approximately 0.8 mA during full-rate operation before peripheral and IO loading. The calculation uses 32 MHz x 25 uA/MHz = 0.8 mA and 3.3 V x 0.8 mA = 2.64 mW. Actual board power is higher once GPIO, analog blocks, the event system, and external regulator losses are included, so measure the assembled product in its real operating states.

Place every VDD or VDDCORE connection adjacent to its matching ground return and decouple each supply according to the manufacturer pinout and layout guidance. Keep the 24-SSOP footprint within the board outline, use the recommended lead length and paste mask, and avoid placing high-current switching nodes beneath the device. Separate analog inputs from serial and switching traces so that the 12-bit ADC and comparator retain usable signal integrity in the final assembly.

Do not substitute another ATSAML10D14A ordering code without checking both the package drawing and pin multiplexing. A different package suffix can require a different land pattern, while a change in shipping suffix affects reel or tray handling rather than electrical compatibility. Confirm the exact suffix, VDDCORE and VDDIO requirements, programming pins, peripheral assignments, and operating-temperature grade in the manufacturer documentation before releasing the PCB for fabrication.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The Microchip ATSAML10D14A is an industrial-temperature microcontroller in the -40 C to +85 C range. Formal RoHS, REACH, halogen-free, and conflict-minerals declarations should be confirmed through the manufacturer's current product-compliance documentation for the exact ordering code.

Dữ liệu được xác minh vào: 2026-11-20 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

ATSAML10D14A-YU datasheet ATSAML10D14A-YU pinout ATSAML10D14A-YU specifications Microchip ATSAML10D14A-YU ATSAML10D14A-YU price ATSAML10D14A-YU stock ATSAML10D14A-YU replacement ATSAML10D14A-YU equivalent ATSAML10D14A-YU footprint ATSAML10D14A-YU application circuit ATSAML10D14A 24-SSOP pinout ATSAML10D14A 32MHz Cortex-M23

Các bộ phận và thuật ngữ liên quan

Microchip Technology ATSAML10D14A-YU ATSAML10D14A SAM L10 Arm Cortex-M23 ARM Cortex-M23 microcontroller 32-bit microcontroller embedded microcontroller reduced-instruction-set computing Thumb instruction set 16 KB flash memory 4 KB SRAM 12-bit ADC DAC operational amplifier analog comparator SERCOM enhanced peripheral touch controller ISO7816 smart card interface 24-SSOP package SSOP package family surface-mount device low-power embedded control event system
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ