Microchip Technology

ATTINY25-20MU - 20MHz AVR MCU | Microchip Technology

MPN: ATTINY25-20MU ✓ সক্রিয়
3.3V or 5V Vdss 20-pin QFN exposed-pad (MLF), 4 x 4 mm Package 20 MHz Speed 2KB Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ATTINY25-20MU সারাংশ

The Microchip Technology ATTINY25-20MU is a picoPower AVR RISC-based CMOS 8-bit microcontroller operating at up to 20MHz, with 2KB ISP Flash memory, 128B EEPROM, 128B SRAM, and six general-purpose I/O lines in a 20-pin QFN exposed-pad package measuring 4 x 4 mm. It also includes one 8-bit timer/counter with compare modes and USI ADC functionality.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one compact device. The ATtiny25 belongs to the TinyAVR family, one branch of the 8-bit AVR RISC architecture within the broader category of embedded processors and microcontrollers. Its small memory footprint and limited I/O count are suited to compact control tasks rather than high-end embedded processing.

The ATTINY25-20MU combines 2KB of in-system-programmable Flash with 128B EEPROM and 128B SRAM. Its AVR processing core provides 32 general-purpose working registers, reducing the need to load frequently used values from memory. Six general-purpose I/O lines support digital control and communication functions, while the 8-bit timer/counter with compare modes assists with timing, pulse measurement, and simple waveform-generation tasks.

The device uses the Microchip picoPower architecture and supports operation from a 3.3V or 5V supply context. The -20 suffix identifies the 20MHz speed grade, while the MU ordering code identifies the 20-pin QFN exposed-pad industrial-temperature package configuration. Its compact 4 x 4mm footprint supports space-constrained boards, although the exposed pad must be connected according to the manufacturer's layout guidance.

Typical uses include compact sensor nodes, simple motor or actuator controllers, low-cost dimmers, miniature instrumentation, embedded timers, and general-purpose hobby electronics. The USI and ADC resources make the device useful for designs that combine digital control with limited analog input or serial-interface requirements. Its 2KB Flash capacity favors compact firmware with focused control logic.

PCB design should preserve the pin and exposed-pad requirements of the QFN package, provide short power and ground connections, and follow the manufacturer's decoupling and programming recommendations. Because the device offers only 2KB of Flash and 128B SRAM, firmware should be checked for code size and stack demand before production, while unused GPIO pins require deliberate termination.

This product page combines the manufacturer's ATtiny25 architecture details with package-specific information, application guidance, procurement questions, and design considerations. It also distinguishes exact ordering options from broader family members so engineers can assess the ATTINY25-20MU for compact, low-power embedded control designs.

এর জন্য ড্রপ-ইন বিকল্প ATTINY25-20MU — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।

বিকল্প অনুরোধ করুন

ATTINY25-20MU সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type 8-bit RISC-based CMOS microcontroller
Architecture AVR picoPower
সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি 20 MHz
Flash Memory 2KB
Flash Organization 1K x 16 bits
EEPROM 128B
SRAM 128B
General-Purpose I/O Lines 6
General-Purpose Working Registers 32
Timer/Counter 1 x 8-bit timer/counter with compare modes
Peripheral Interface USI
ADC Available
Supply Voltage Context 3.3V or 5V
প্যাকেজ 20-pin QFN exposed-pad (MLF), 4 x 4 mm
মাউন্টিং টাইপ Surface mount
Temperature Grade Industrial temperature grade
Green Status Green
Functional Safety Functional Safety (FuSa) Microcontroller

ATTINY25-20MU 20-pin qfn exposed-pad (mlf), 4 x 4 mm পিন কনফিগারেশন গাইড

ATTINY25-20MU (20-pin qfn exposed-pad (mlf), 4 x 4 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

ATTINY25-20MU-এর জন্য 20-pin qfn exposed-pad (mlf), 4 x 4 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ATTINY25-20MU.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ATTINY25-20MU এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Compact Sensor Node, Simple Motor and Actuator Control, LED Dimming and Lighting Control, Portable Instrumentation, Programmable Timer and Sequencer, Remote Control and Interface Hub.

🧩

Compact Sensor Node

The ATTINY25-20MU fits a compact sensor node when the design needs basic analog measurement and serial data handling without a large processor. Its 20MHz AVR core supports responsive sampling control, while the ADC and USI resources reduce the number of separate interface devices. Six GPIO lines can serve interrupt, mode, enable, or status functions. The main constraint is the 128B SRAM, so sampling buffers and communication queues must remain compact. The 20-pin QFN exposed-pad package also reduces board area, although its exposed thermal pad requires proper PCB land-pattern and copper treatment.

🏭

Simple Motor and Actuator Control

The ATTINY25-20MU can control a small motor, relay, solenoid, or other actuator when deterministic timing and limited logic capacity are sufficient. Its 8-bit timer/counter with compare modes is useful for pulse generation, timing intervals, and basic duty-cycle control, while six GPIO lines are available for driver commands and status inputs. At 20MHz, the AVR core provides more timing headroom than lower-speed devices. Firmware must fit within 2KB of Flash, and motor-current transients require careful grounding and isolation from sensitive control signals.

💡

LED Dimming and Lighting Control

The ATTINY25-20MU is appropriate for compact LED dimming, pulse-width modulation, or decorative lighting control because its timer/counter can generate deterministic timing waveforms and six GPIO lines can operate multiple associated functions. The 20MHz clock supports responsive user-input handling and stable update timing, while the 2KB Flash limit favors focused control firmware. In a hard-switched LED circuit, keep high-current paths separate from the MCU supply and ground returns. Series current limiting and transistor drive components should be selected outside the controller's logic functions.

📱

Portable Instrumentation

The ATTINY25-20MU is useful in small battery-operated instruments that combine a short measurement cycle, local control, and serial reporting. Its picoPower-based AVR design emphasizes efficient operation, while the 20MHz clock provides adequate control-loop performance for compact tasks. The ADC can support basic analog measurements, and USI can simplify communication with a sensor or external peripheral. Because SRAM is limited to 128B, data should usually be processed and transmitted incrementally rather than accumulated in a large buffer. Power-consumption behavior must be evaluated with the final firmware and peripheral activity.

⏱️

Programmable Timer and Sequencer

The ATTINY25-20MU can implement a programmable timer, event sequencer, or process sequencer when the required timing resolution is modest. Its single 8-bit timer/counter with compare modes provides a dedicated timing resource, and the 32 working registers help organize state without excessive SRAM use. The 20MHz operating speed permits multiple timer operations and responsive event handling in a small footprint. Firmware must account for interrupt latency and keep long-running state within the 128B SRAM allocation. A crystal or other timing component should be added only if the accuracy requirement exceeds the internal clock's capabilities.

🌐

Remote Control and Interface Hub

The ATTINY25-20MU can act as a compact remote-control receiver or small interface hub when commands and data volumes are limited. The USI supports serial communication tasks, six GPIO lines can carry button, interrupt, or handshake signals, and the 20MHz core allows responsive command decoding. The device is particularly useful when board area, energy use, and production cost matter more than large firmware capacity. Firmware should use compact buffers because only 128B SRAM is available, and the programming interface should remain accessible for firmware updates. PCB signal routing must preserve clean grounding for the exposed-pad package.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

ATTINY25 ATtiny25 family device ব্যবহৃত হয়: Compact Sensor Node, Simple Motor and Actuator Control, LED Dimming and Lighting Control, Portable Instrumentation, Programmable Timer and Sequencer, Remote Control and Interface Hub ATTINY25-20MU Microchip Technology ব্যবহৃত হয়: Compact Sensor Node, Simple Motor and Actuator Control, LED Dimming and Lighting Control, Portable Instrumentation, Programmable Timer and Sequencer, Remote Control and Interface Hub
What are the key specifications of ATTINY25-20MU that engineers should know?
The ATTINY25-20MU is a 20MHz, 8-bit AVR microcontroller with 2KB of ISP Flash, 128B of EEPROM, 128B of SRAM, six GPIO lines, and 32 working registers in a 20-pin 4 x 4mm QFN exposed-pad package. According to the Microchip ATtiny25 product page, it also uses the picoPower architecture and includes one 8-bit timer/counter with compare modes. These resources make it most appropriate for compact embedded-control products that need deterministic timing, serial connectivity through USI, and modest firmware storage.
Where can I download the ATTINY25-20MU datasheet and find its pinout?
The official ATTINY25-20MU technical documents are available from the Microchip ATtiny25 product page at https://www.microchip.com/en-us/product/ATtiny25. The ordering information identifies ATTINY25-20MU as a 20-pin QFN exposed-pad device in a 4 x 4mm package. Use the package drawing and pin-description table in the manufacturer documentation when assigning PCB nets, especially for the exposed thermal pad, power pins, and programming interface.
What is the operating frequency and memory capacity of the ATTINY25-20MU?
The ATTINY25-20MU operates at up to 20MHz and provides 2KB of in-system-programmable Flash, equivalent to 1K x 16 bits. It also includes 128B of EEPROM for nonvolatile parameter storage and 128B of SRAM for working data. According to the Microchip ATtiny25 product page, the device provides 32 general-purpose working registers, helping frequently used variables remain accessible within the AVR register file.
Where can I buy ATTINY25-20MU and what is its current lead time?
Use the Request a Quote form on this page to request ATTINY25-20MU pricing, current stock, minimum order quantity, and lead time for the exact 20-pin QFN exposed-pad ordering code. The manufacturer product page identifies ATTINY25 as an ATtiny family device, while distributor records distinguish ATTINY25-20MU from related suffix codes. A quote request prevents confusion with different package, speed-grade, or delivery configurations.
How much does ATTINY25-20MU cost?
The current price of ATTINY25-20MU is presented through the Request a Quote form on this page. Request the exact MPN so the quote reflects the 20-pin QFN exposed-pad configuration, quantity, delivery method, and production schedule. The structured listing data on this page can be used to review price history and availability, while a direct quote request provides the current commercial terms for the part.
Is ATTINY25-20MU in stock and available for production?
ATTINY25-20MU is listed for order through the manufacturer's ATtiny25 product family, but current inventory should be confirmed through the Request a Quote form on this page. Include your required quantity, date code policy, and shipment destination in the request. This is important because the same ATtiny25 family includes multiple package and ordering suffixes, including ATTINY25-20MUR, which is not the same delivery configuration as ATTINY25-20MU.
What is the difference between ATTINY25 and ATTINY85?
ATTINY25 and ATTINY85 belong to the same general 8-bit AVR family, but they are not automatically interchangeable because their memory and peripheral resources differ. The ATTINY25 has 2KB Flash, 128B EEPROM, and 128B SRAM, while detailed ATTINY85 memory and timer resources must be checked before substitution. According to Microchip's ATtiny25 product page, ATTINY25 also provides six GPIO lines, 32 working registers, and one 8-bit timer/counter.
When should I choose ATTINY25-20MU instead of ATTINY85?
Choose ATTINY25-20MU when a design requires only 2KB of Flash, 128B of EEPROM, and 128B of SRAM while fitting into a compact 20-pin QFN exposed-pad footprint. Its six GPIO lines, 32 working registers, and single 8-bit timer/counter are sufficient for focused control or timing functions. Select ATtiny85 instead when the design requires the additional memory or peripherals specified for that family.
Is ATTINY25-20MU suitable for a compact sensor or actuator controller?
The ATTINY25-20MU is suitable for a compact sensor or actuator controller when the application fits within 2KB of Flash and requires only six GPIO lines. Its USI and ADC resources support basic analog-input and serial-interface tasks, while the 20MHz AVR core provides timing headroom for responsive control. The 128B SRAM is the main constraint, so firmware stack and buffer allocation should be reviewed before implementation.
What can replace ATTINY25-20MU on the same PCB?
A valid replacement must match the exact 20-pin QFN exposed-pad footprint, pin assignment, programming interface, memory architecture, and peripheral functions of the ATTINY25-20MU. Related suffix codes such as ATTINY25-20MUR or ATTINY25-20SSU cannot be assumed to be drop-in replacements because package and ordering configurations differ. Use the Request a Quote form to request a component review against the required footprint and firmware compatibility.
Can ATTINY25-20MU replace ATTINY85 without changing the PCB?
The ATTINY25-20MU cannot be treated as a drop-in replacement for the ATTINY85 without verifying the package, pinout, programming signals, memory map, and peripheral assignments. The ATTINY25 has 2KB of Flash, 128B EEPROM, and 128B SRAM, which are fixed architecture constraints for any firmware migration. Even if a board layout is physically similar, firmware and application requirements must be reassessed before substitution.
How do I program an ATTINY25-20MU?
Program the ATTINY25-20MU through its in-system-programmable Flash interface using a compatible AVR programmer and the device's documented power, reset, and programming pins. The 2KB ISP Flash capacity should be checked against the final firmware image before programming. Keep the programming interface accessible when practical, and follow the manufacturer package-pin table to avoid conflicts with adjacent signal or exposed-pad assignments.
What are the ATTINY25-20MU pinout and package details?
The ATTINY25-20MU uses a 20-pin QFN exposed-pad package measuring 4 x 4mm, with six general-purpose I/O lines and a functional exposed pad. The package is also described as 20-QFN-EP, while the manufacturer family page describes the ATtiny25 architecture. Use the manufacturer package drawing and pin-description table for the authoritative net assignment because a complete numbered pin list is not reproduced here.
What design constraints matter when using the ATTINY25-20MU?
The primary design constraints are the 2KB Flash limit, 128B SRAM limit, six available GPIO lines, and the exposed-pad PCB requirement. According to the Microchip ATtiny25 product page, the device has 32 working registers, but firmware still needs to control stack depth and peripheral buffer usage. Place decoupling close to the supply pins, connect the exposed pad as directed by the package drawing, and keep programming and ground layouts serviceable.
What is the best cross-brand equivalent for ATTINY25-20MU?
No cross-brand equivalent can be confirmed as a drop-in replacement for the ATTINY25-20MU from the available product records. A valid substitute must reproduce the 20-pin QFN exposed-pad pinout, 20MHz operation, AVR-compatible programming behavior, 2KB Flash, 128B EEPROM, 128B SRAM, and required USI and timer functions. Submit the target and candidate MPNs for engineering review through the Request a Quote form rather than relying only on nominal clock and memory similarity.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ATTINY25-20MU — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the ATTINY25-20MU when a board needs a compact 20-pin QFN controller with a 20MHz AVR core, 2KB ISP Flash, 128B EEPROM, 128B SRAM, six GPIO lines, one 8-bit timer/counter, USI, and ADC capability. Its strongest fit is a focused embedded-control product with modest firmware, deterministic timing, and limited I/O. Confirm that 2KB is sufficient and that 128B of SRAM supports the intended buffers and stack depth. Do not substitute related ATtiny25 ordering codes merely because the base family and clock match: ATTINY25-20MUR differs in delivery configuration, while ATTINY25-20SSU and ATTINY25-20SUR use different package selections. For a higher-memory or more highly integrated design, move to another ATtiny family member only after checking its package, pinout, programming interface, and firmware requirements. Cross-brand alternatives should be accepted only after a complete electrical, mechanical, and software compatibility review.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য
Brand Microchip Technology
Package 20-pin QFN exposed-pad (MLF), 4 x 4 mm
Architecture AVR picoPower
CPU Width 8-bit RISC
Maximum Clock Frequency 20 MHz
Flash Memory 2KB (1K x 16 bits)
EEPROM 128B
SRAM 128B
General-Purpose I/O Lines 6
Timer/Counter 1 x 8-bit timer/counter with compare modes

ডিজাইন নোট

Follow the manufacturer's 20-pin QFN exposed-pad land pattern exactly, including the thermal-pad geometry and solder-mask definition. Keep the exposed pad connected to the intended ground or supply reference specified by the package documentation. Place input, output, and decoupling capacitors close to their associated pins, and route high-current or fast-switching paths away from sensitive analog inputs connected to the ADC.

Do not select the ATTINY25 solely because another ATtiny device has the same clock speed. Firmware size must remain within the 2KB Flash limit, runtime buffers must fit within 128B SRAM, and the design must use no more than the six available GPIO lines. Also verify the exact package suffix before layout release because ATTINY25-20MU, ATTINY25-20MUR, ATTINY25-20SSU, and ATTINY25-20SUR represent different ordering configurations.

Evaluate average and peak supply requirements for the ADC, USI, and attached external circuits rather than sizing the rail for the controller alone. Place the local bypass capacitor at the device's supply pins and maintain a low-impedance return to the exposed pad. If an internal clock is used, verify that its timing accuracy meets the application; add an accurate external clock only when the required precision justifies the additional board area.

Plan the ISP programming interface before finalizing the PCB. Preserve access to the programming signals, maintain stable power during programming, and account for any boot or reset behavior required by the selected programmer. Because the device has only 128B SRAM, avoid deep interrupt nesting and large local arrays. Measure stack usage in the final build and minimize buffered data when USI or ADC results are handled in the same firmware.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The component is described as green in the product records, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified. Confirm the required declarations with the manufacturer before regulatory qualification.

ডেটা যাচাই করা হয়েছে: 2026-11-14 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

attiny25 pinout attiny25 datasheet attiny25 price attiny25 vs attiny85 attiny25 20ssu attiny25 programming attiny25 20sur attiny25 20su datasheet ATTINY25-20MU datasheet pdf ATTINY25-20MU replacement ATTINY25-20MU QFN-20 footprint ATTINY25-20MU equivalent

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology ATTINY25-20MU ATTINY25 ATTINY25-20MUR ATTINY25-20SSU ATTINY25-20SUR ATtiny85 AVR AVR RISC architecture picoPower 8-bit microcontroller TinyAVR embedded processor semiconductor ISP Flash memory EEPROM SRAM USI ADC timer/counter GPIO QFN-20 exposed-pad package surface mount
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন