ATTINY25-20MU - 20MHz AVR MCU | Microchip Technology
Teilenummer: ATTINY25-20MU ✓ AktivATTINY25-20MU Übersicht
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one compact device. The ATtiny25 belongs to the TinyAVR family, one branch of the 8-bit AVR RISC architecture within the broader category of embedded processors and microcontrollers. Its small memory footprint and limited I/O count are suited to compact control tasks rather than high-end embedded processing.
The ATTINY25-20MU combines 2KB of in-system-programmable Flash with 128B EEPROM and 128B SRAM. Its AVR processing core provides 32 general-purpose working registers, reducing the need to load frequently used values from memory. Six general-purpose I/O lines support digital control and communication functions, while the 8-bit timer/counter with compare modes assists with timing, pulse measurement, and simple waveform-generation tasks.
The device uses the Microchip picoPower architecture and supports operation from a 3.3V or 5V supply context. The -20 suffix identifies the 20MHz speed grade, while the MU ordering code identifies the 20-pin QFN exposed-pad industrial-temperature package configuration. Its compact 4 x 4mm footprint supports space-constrained boards, although the exposed pad must be connected according to the manufacturer's layout guidance.
Typical uses include compact sensor nodes, simple motor or actuator controllers, low-cost dimmers, miniature instrumentation, embedded timers, and general-purpose hobby electronics. The USI and ADC resources make the device useful for designs that combine digital control with limited analog input or serial-interface requirements. Its 2KB Flash capacity favors compact firmware with focused control logic.
PCB design should preserve the pin and exposed-pad requirements of the QFN package, provide short power and ground connections, and follow the manufacturer's decoupling and programming recommendations. Because the device offers only 2KB of Flash and 128B SRAM, firmware should be checked for code size and stack demand before production, while unused GPIO pins require deliberate termination.
This product page combines the manufacturer's ATtiny25 architecture details with package-specific information, application guidance, procurement questions, and design considerations. It also distinguishes exact ordering options from broader family members so engineers can assess the ATTINY25-20MU for compact, low-power embedded control designs.
Drop-in-Alternativen für ATTINY25-20MU – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernATTINY25-20MU Grenzwerte & elektrische Eigenschaften
| Product Type | 8-bit RISC-based CMOS microcontroller |
| Architecture | AVR picoPower |
| Maximale Taktfrequenz | 20 MHz |
| Flash Memory | 2KB |
| Flash Organization | 1K x 16 bits |
| EEPROM | 128B |
| SRAM | 128B |
| General-Purpose I/O Lines | 6 |
| General-Purpose Working Registers | 32 |
| Timer/Counter | 1 x 8-bit timer/counter with compare modes |
| Peripheral Interface | USI |
| ADC | Available |
| Supply Voltage Context | 3.3V or 5V |
| Gehäuse | 20-pin QFN exposed-pad (MLF), 4 x 4 mm |
| Montageart | Surface mount |
| Temperature Grade | Industrial temperature grade |
| Green Status | Green |
| Functional Safety | Functional Safety (FuSa) Microcontroller |
ATTINY25-20MU 20-pin qfn exposed-pad (mlf), 4 x 4 mm Pinbelegungsleitfaden
Pinbelegung für ATTINY25-20MU (20-pin qfn exposed-pad (mlf), 4 x 4 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für ATTINY25-20MU.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
ATTINY25-20MU ist geeignet für 6 Anwendungs: Compact Sensor Node, Simple Motor and Actuator Control, LED Dimming and Lighting Control, Portable Instrumentation, Programmable Timer and Sequencer, Remote Control and Interface Hub.
Compact Sensor Node
The ATTINY25-20MU fits a compact sensor node when the design needs basic analog measurement and serial data handling without a large processor. Its 20MHz AVR core supports responsive sampling control, while the ADC and USI resources reduce the number of separate interface devices. Six GPIO lines can serve interrupt, mode, enable, or status functions. The main constraint is the 128B SRAM, so sampling buffers and communication queues must remain compact. The 20-pin QFN exposed-pad package also reduces board area, although its exposed thermal pad requires proper PCB land-pattern and copper treatment.
Empfohlen
Simple Motor and Actuator Control
The ATTINY25-20MU can control a small motor, relay, solenoid, or other actuator when deterministic timing and limited logic capacity are sufficient. Its 8-bit timer/counter with compare modes is useful for pulse generation, timing intervals, and basic duty-cycle control, while six GPIO lines are available for driver commands and status inputs. At 20MHz, the AVR core provides more timing headroom than lower-speed devices. Firmware must fit within 2KB of Flash, and motor-current transients require careful grounding and isolation from sensitive control signals.
Empfohlen
LED Dimming and Lighting Control
The ATTINY25-20MU is appropriate for compact LED dimming, pulse-width modulation, or decorative lighting control because its timer/counter can generate deterministic timing waveforms and six GPIO lines can operate multiple associated functions. The 20MHz clock supports responsive user-input handling and stable update timing, while the 2KB Flash limit favors focused control firmware. In a hard-switched LED circuit, keep high-current paths separate from the MCU supply and ground returns. Series current limiting and transistor drive components should be selected outside the controller's logic functions.
Empfohlen
Portable Instrumentation
The ATTINY25-20MU is useful in small battery-operated instruments that combine a short measurement cycle, local control, and serial reporting. Its picoPower-based AVR design emphasizes efficient operation, while the 20MHz clock provides adequate control-loop performance for compact tasks. The ADC can support basic analog measurements, and USI can simplify communication with a sensor or external peripheral. Because SRAM is limited to 128B, data should usually be processed and transmitted incrementally rather than accumulated in a large buffer. Power-consumption behavior must be evaluated with the final firmware and peripheral activity.
Empfohlen
Programmable Timer and Sequencer
The ATTINY25-20MU can implement a programmable timer, event sequencer, or process sequencer when the required timing resolution is modest. Its single 8-bit timer/counter with compare modes provides a dedicated timing resource, and the 32 working registers help organize state without excessive SRAM use. The 20MHz operating speed permits multiple timer operations and responsive event handling in a small footprint. Firmware must account for interrupt latency and keep long-running state within the 128B SRAM allocation. A crystal or other timing component should be added only if the accuracy requirement exceeds the internal clock's capabilities.
Empfohlen
Remote Control and Interface Hub
The ATTINY25-20MU can act as a compact remote-control receiver or small interface hub when commands and data volumes are limited. The USI supports serial communication tasks, six GPIO lines can carry button, interrupt, or handshake signals, and the 20MHz core allows responsive command decoding. The device is particularly useful when board area, energy use, and production cost matter more than large firmware capacity. Firmware should use compact buffers because only 128B SRAM is available, and the programming interface should remain accessible for firmware updates. PCB signal routing must preserve clean grounding for the exposed-pad package.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ATTINY25-20MU – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt |
|---|---|
| Brand | Microchip Technology |
| Package | 20-pin QFN exposed-pad (MLF), 4 x 4 mm |
| Architecture | AVR picoPower |
| CPU Width | 8-bit RISC |
| Maximum Clock Frequency | 20 MHz |
| Flash Memory | 2KB (1K x 16 bits) |
| EEPROM | 128B |
| SRAM | 128B |
| General-Purpose I/O Lines | 6 |
| Timer/Counter | 1 x 8-bit timer/counter with compare modes |
Designhinweise
Follow the manufacturer's 20-pin QFN exposed-pad land pattern exactly, including the thermal-pad geometry and solder-mask definition. Keep the exposed pad connected to the intended ground or supply reference specified by the package documentation. Place input, output, and decoupling capacitors close to their associated pins, and route high-current or fast-switching paths away from sensitive analog inputs connected to the ADC.
Do not select the ATTINY25 solely because another ATtiny device has the same clock speed. Firmware size must remain within the 2KB Flash limit, runtime buffers must fit within 128B SRAM, and the design must use no more than the six available GPIO lines. Also verify the exact package suffix before layout release because ATTINY25-20MU, ATTINY25-20MUR, ATTINY25-20SSU, and ATTINY25-20SUR represent different ordering configurations.
Evaluate average and peak supply requirements for the ADC, USI, and attached external circuits rather than sizing the rail for the controller alone. Place the local bypass capacitor at the device's supply pins and maintain a low-impedance return to the exposed pad. If an internal clock is used, verify that its timing accuracy meets the application; add an accurate external clock only when the required precision justifies the additional board area.
Plan the ISP programming interface before finalizing the PCB. Preserve access to the programming signals, maintain stable power during programming, and account for any boot or reset behavior required by the selected programmer. Because the device has only 128B SRAM, avoid deep interrupt nesting and large local arrays. Measure stack usage in the final build and minimize buffered data when USI or ADC results are handled in the same firmware.
Compliance-Informationen
The component is described as green in the product records, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified. Confirm the required declarations with the manufacturer before regulatory qualification.