Microchip Technology

ATTINY261A-MN - 20MHz AVR Microcontroller | Microchip

MPN: ATTINY261A-MN ✓ সক্রিয়
1.8 V to 5.5 V Vdss 32-VQFN, 5 mm x 5 mm Package 20 MHz Speed 2 KB (1 K x 16 bits) Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ATTINY261A-MN সারাংশ

The Microchip Technology ATTINY261A-MN is a picoPower 8-bit AVR RISC-based microcontroller with a 20 MHz maximum clock, 2 KB of in-system programmable Flash, 128 B of EEPROM, 128 B of SRAM, and 16 general-purpose I/O lines. The device is supplied in a 32-VQFN surface-mount package measuring 5 mm by 5 mm, making it suitable for compact embedded control designs.

What is an 8-bit AVR microcontroller? It is a compact RISC-based embedded controller that executes instructions from embedded Flash memory and uses general-purpose registers, timers, interrupts, and serial or analog peripherals to control electronic products. Within the embedded-product hierarchy, the ATTINY261A belongs to the AVR family, the 8-bit microcontroller class, and the broader power-management and embedded-control semiconductor category. Its picoPower implementation emphasizes efficient operation in small control systems.

Key device features include 2 KB of Flash organized as 1 K by 16 bits, 128 B of EEPROM, 128 B of internal SRAM, 32 working registers, and 16 general-purpose I/O lines. Peripherals described for this family include an 8-bit timer/counter with compare modes, PWM support, a prescaler, and a high-speed 8/10-bit timer/counter. The operating supply range is 1.8 V to 5.5 V, allowing operation across low-voltage and conventional 5 V embedded systems.

The ATTINY261A architecture combines an 8-bit AVR instruction set with Harvard-style separate program and data-memory organization and a reduced instruction cycle time. The 20 MHz operating capability provides practical headroom for event timing, digital control, and low-cost communication peripherals. Compared with larger AVR devices, its 2 KB Flash capacity favors compact firmware rather than graphical interfaces, large protocol stacks, or extensive data logging.

Typical uses include motor and valve control, lighting systems, small appliance controllers, industrial interface modules, and compact sensor nodes. Its 16 I/O lines, PWM-capable timers, and flexible 1.8 V to 5.5 V supply range make it useful when a board must combine control outputs with low-voltage sensing. Firmware and peripheral configuration should be selected with the 2 KB program-memory constraint in mind.

PCB planning must account for the 5 mm by 5 mm VQFN footprint, exposed thermal-pad requirements, and manufacturer land-pattern guidance. Place decoupling capacitors close to the supply pins and reserve adequate ground-plane area beneath the device to support both electrical return paths and thermal performance. Confirm final pad dimensions against the current manufacturer package drawing before fabrication.

This product page combines the manufacturer product information, package and memory details, drop-in family comparisons, and implementation guidance for engineers evaluating the ATTINY261A-MN in compact embedded systems.

এর জন্য ড্রপ-ইন বিকল্প ATTINY261A-MN — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible ATTINY261A-MN (একই form factor এবং footprint) — পার্থক্য রয়েছে EEPROM, Flash Memory, Timer/Counter, General-Purpose I/O Lines, General-Purpose Working Registers.

Microchip Technology
EEPROM: 128 bytes
Flash Memory: 2 KB (1K x 16)
Timer/Counter: 8-bit timer/counter with compare modes
এর সাথে তুলনা করুন ATTINY261A-MN →
Microchip Technology
EEPROM: 256 bytes
Flash Memory: 4 KB
Timer/Counter: 8-bit with compare modes
এর সাথে তুলনা করুন ATTINY261A-MN →

ATTINY261A-SU

✅ ড্রপ-ইন
Microchip Technology
📦 32-VQFN (5x5)
8-bit AVR RISC microcontroller · 20 MHz · 2 KB (1K x 16) · 128 bytes · 128 bytes · 16 lines · 32 registers · 8-bit timer/counter with compare modes

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATTINY461A-SU

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Microchip Technology
📦 32-VQFN (5x5)
8-bit AVR RISC-based microcontroller · 20 MHz · 4 KB · 2K x 16 bits · 256 bytes · 256 bytes · 16 · 32

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATTINY861A-SU

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 32-VQFN (5x5)
Same 20 MHz AVR family and 32-VQFN footprint, but Flash increases from 2 KB to 8 KB by 300% while the target retains 128 B of SRAM.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ATTINY261A-MN সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type 8-bit AVR RISC-based microcontroller
Architecture AVR enhanced RISC
Technology picoPower
সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি 20 MHz
Flash Memory 2 KB (1 K x 16 bits)
EEPROM 128 B
Internal SRAM 128 B
General-Purpose I/O Lines 16
General-Purpose Working Registers 32
অপারেটিং সাপ্লাই ভোল্টেজ 1.8 V to 5.5 V
Nominal Supply Options 2.5 V, 3.3 V, and 5 V
Timer/Counter 8-bit with compare modes, PWM, and prescaler
High-Speed Timer/Counter 8/10-bit
Instruction Set 123 powerful AVR instructions
প্যাকেজ 32-VQFN, 5 mm x 5 mm
মাউন্টিং টাইপ Surface mount
Program Memory Type In-system self-programmable Flash

ATTINY261A-MN 32-vqfn, 5 mm x 5 mm পিন কনফিগারেশন গাইড

ATTINY261A-MN (32-vqfn, 5 mm x 5 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

ATTINY261A-MN-এর জন্য 32-vqfn, 5 mm x 5 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ATTINY261A-MN.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ATTINY261A-MN এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Compact Motor Control, LED Lighting Controller, Small Appliance Controller, Industrial Valve and Relay Interface, Battery-Powered Sensor Interface, Embedded Control and Signal Interface.

🏭

Compact Motor Control

The ATTINY261A-MN fits compact motor-control and position-control designs because its 16 general-purpose I/O lines can support control signals, switches, and sensors, while its timer resources include an 8-bit timer/counter with compare modes, PWM, and a prescaler. At up to 20 MHz, the microcontroller can execute timing logic and closed-loop control routines without a larger processor. Place it beside a suitable gate driver or H-bridge, connect the motor position sensor to an available timer or ADC-capable peripheral, and preserve separate analog and digital grounding. The 2 KB Flash limit makes concise fixed-point control code preferable to feature-heavy motion algorithms.

💡

LED Lighting Controller

The ATTINY261A-MN is appropriate for programmable LED lighting because its PWM-capable timer/counter supports dimming and patterned output while 16 I/O lines provide room for mode buttons, indicators, and fault signals. The device operates from 1.8 V to 5.5 V, allowing it to share a regulated rail with compatible LED-driver circuitry. Implement current limiting and constant-current conversion outside the MCU, and synchronize dimming updates to the timer rather than relying on blocking delays. Its 2 KB Flash is sufficient for compact lighting tables, fade sequences, and basic schedules, but large animation libraries may require a higher-memory controller.

🔧

Small Appliance Controller

The ATTINY261A-MN works well in small appliances where a compact controller manages buttons, relays, heaters, fans, and status indicators. Its 128 B of SRAM and 128 B of EEPROM provide enough working space for compact state machines and retained settings, while 16 I/O lines offer flexible peripheral assignment. The 20 MHz clock supports responsive debouncing and timing logic, and the 1.8 V to 5.5 V operating range permits integration with several common supply arrangements. Use appropriate flyback protection for inductive loads and keep mains-connected switching circuitry isolated from the low-voltage controller section.

🏭

Industrial Valve and Relay Interface

The ATTINY261A-MN can act as the low-power controller in a compact valve, relay, or actuator interface module. Sixteen I/O lines allow a mixture of command outputs and status inputs, while the 8-bit and 8/10-bit timer resources support pulse timing, debounce intervals, and periodic monitoring. Operating down to 1.8 V provides flexibility when the interface electronics use a regulated low-voltage rail. Separate field-side drivers from logic ground where isolation is required, select components for the coil voltage and switching current, and validate timing behavior across the complete operating-temperature range.

🧩

Battery-Powered Sensor Interface

The ATTINY261A-MN is useful in a small sensor-interface node because its picoPower AVR architecture targets efficient embedded operation and its 1.8 V to 5.5 V supply range accommodates low-energy rails. Sixteen I/O lines can support digital sensors, interrupt inputs, and status indicators without an external I/O expander. The 128 B of SRAM is suitable for compact sampling and filtering routines, while EEPROM can retain calibration flags or configuration values. Avoid continuous high-frequency clocking when the application permits, use the MCU sleep modes appropriately, and confirm timer and peripheral behavior at the lowest operating voltage.

🌐

Embedded Control and Signal Interface

The ATTINY261A-MN supports compact embedded signal-interface products that coordinate switches, inputs, timing, and status outputs. Its 20 MHz AVR RISC core can process protocol framing or control logic, while 16 I/O lines and multiple timer resources distribute timing tasks across dedicated peripherals. The 32-VQFN, 5 mm by 5 mm package minimizes board area in modules with limited space. Keep firmware within the 2 KB Flash budget, use interrupt-driven transfers where appropriate, and route externally exposed signals through protection networks. Review every alternate-function assignment against the manufacturer pin-description table before finalizing the PCB.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

ATTINY261A Base device designation for the same controller family ব্যবহৃত হয়: Compact Motor Control, Small Appliance Controller, Battery-Powered Sensor Interface ATTINY261A-SU Microchip Technology ব্যবহৃত হয়: Compact Motor Control, LED Lighting Controller, Small Appliance Controller, Embedded Control and Signal Interface ATTINY261A-MN Microchip Technology ব্যবহৃত হয়: LED Lighting Controller, Industrial Valve and Relay Interface, Embedded Control and Signal Interface ATTINY461A-SU Microchip Technology ব্যবহৃত হয়: Industrial Valve and Relay Interface ATTINY861A-SU Higher-Flash option for more elaborate sensor firmware ব্যবহৃত হয়: Battery-Powered Sensor Interface
What are the key specifications of ATTINY261A-MN that engineers should know?
The ATTINY261A-MN is a 20 MHz picoPower AVR microcontroller with 2 KB of Flash, 128 B of EEPROM, 128 B of SRAM, and 16 general-purpose I/O lines in a 32-VQFN package. According to the Microchip Technology product page, its 1.8 V to 5.5 V supply range and AVR RISC architecture support compact embedded-control designs, while the 8-bit and 8/10-bit timer/counter resources are useful for timing, PWM, and motor-control functions.
Where can I download the ATTINY261A-MN datasheet PDF?
The ATTINY261A-MN documentation begins with the official Microchip Technology ATtiny261A product page at https://www.microchip.com/en-us/product/ATtiny261A. The manufacturer product information provides the authoritative electrical characteristics, memory organization, package details, and programming information. Use the datasheet linked from that page for design sign-off, particularly the pin description, recommended operating conditions, and VQFN land-pattern drawings.
Where can I find the ATTINY261A-MN pinout?
The ATTINY261A-MN pinout is documented in the manufacturer ATtiny261A datasheet under the package and pin-description information. The device uses a 32-VQFN, 5 mm by 5 mm package, so its footprint and exposed-pad arrangement must be taken directly from the package drawing rather than inferred from a generic QFN layout. Use the pin-description table when assigning PCB tracks, programming functions, and exposed-pad connections.
What is the operating voltage of ATTINY261A-MN?
The ATTINY261A-MN operates from 1.8 V to 5.5 V. According to the ATtiny261A manufacturer documentation and product listings, the device also supports common 2.5 V, 3.3 V, and 5 V supply arrangements. The selected supply must remain within the datasheet limits across temperature, while external peripherals and I/O levels should be checked for compatibility with that voltage.
How much Flash, SRAM, and EEPROM does ATTINY261A-MN contain?
The ATTINY261A-MN provides 2 KB of in-system programmable Flash, 128 B of EEPROM, and 128 B of internal SRAM. Microchip Technology identifies the program memory as 1 K by 16 bits and the MCU as having 32 general-purpose working registers. These resources are intended for compact control firmware rather than large graphical applications or memory-intensive network stacks.
What can replace ATTINY261A-MN in an existing design?
The closest documented replacement is ATTINY261A-MNR when only reel packaging differs, although changing tape-and-reel packaging does not alter electrical behavior. The older ATTINY261 family is also functionally replaced by ATTINY261A according to Microchip migration guidance, but electrical characteristics can change because the manufacturing process differs. For PCB compatibility, review the package drawing, supply limits, pin functions, and qualification requirements before substitution.
Is ATTINY261A-MN the same as ATTINY461A or ATTINY861A?
The ATTINY261A-MN, ATTINY461A, and ATTINY861A share the same 32-VQFN family platform and associated migration framework, but they are not identical devices. The ATTINY261A has 2 KB of Flash, while the larger family members provide more program memory. Choose the exact suffix and memory variant only after checking every peripheral function, electrical limit, and firmware requirement in the manufacturer documentation.
When should I choose ATTINY261A-MN over ATTINY461A?
Choose ATTINY261A-MN when 2 KB of Flash is sufficient and the 20 MHz AVR architecture, 16 I/O lines, and compact 32-VQFN footprint meet the design requirements. Select the ATTINY461A family member when additional Flash capacity is needed while retaining the same broader platform. The decisive engineering factors are firmware size, RAM availability, timer allocation, application code complexity, and verified pin compatibility.
Is ATTINY261A-MN suitable for motor and PWM control?
The ATTINY261A-MN is suitable for compact motor and PWM control because it includes 16 I/O lines and timer resources specified for an 8-bit timer/counter with compare modes, PWM, and a prescaler. According to the Microchip ATtiny261A family information, the device also includes a high-speed 8/10-bit timer/counter. Motor drive design must still include suitable driver circuitry, current protection, and appropriate power-stage components.
What is the difference between ATTINY261A-MN and ATTINY261A-MNR?
The ATTINY261A-MN and ATTINY261A-MNR have the same 32-VQFN electrical device designation and differ primarily in order packaging: -MN identifies the tray presentation, while -MNR identifies the tape-and-reel presentation. For an assembled PCB, the electrical and footprint requirements remain the same. Production planners should still confirm reel orientation, moisture handling, and assembly-line feeding requirements against the manufacturer ordering information.
How does ATTINY261A-MN compare with larger 8-bit AVR microcontrollers?
The ATTINY261A-MN emphasizes a compact implementation with 20 MHz operation, 2 KB of Flash, 128 B of SRAM, and 16 I/O lines. Larger 8-bit AVR devices provide more memory and peripherals, making them preferable for protocol stacks, larger state machines, or more control channels. The ATTINY261A-MN remains attractive when its compact 5 mm by 5 mm VQFN footprint and timer resources satisfy the application.
Where can I buy ATTINY261A-MN online?
Use the Request a Quote form on this page to request ATTINY261A-MN availability, current lead time, and order confirmation. The exact MPN identifies the 20 MHz, 2 KB Flash microcontroller in a 32-VQFN package, so include that full suffix in the request. The form is the appropriate route for a firm quotation and current supply confirmation without relying on an outdated catalog figure.
What is the price of ATTINY261A-MN?
Current commercial terms for the ATTINY261A-MN are obtained through the Request a Quote form on this page. Request the exact MPN, required quantity, and delivery destination so the quotation can reflect the correct package suffix and supply status. Pricing for this type of catalog component can vary with quantity and market conditions, making a live quotation more reliable than a historical unit figure.
What is the lead time and stock status of ATTINY261A-MN?
The ATTINY261A-MN is available for quotation through the Request a Quote form on this page, where current stock position and lead time should be confirmed for the requested quantity. Because production planning can change with demand and packaging requirements, submit the full MPN and target quantity before committing the schedule. This request also helps distinguish the -MN tray presentation from other orderable suffixes.
Does ATTINY261A-MN support RoHS and automotive qualification?
The RoHS, REACH, and automotive qualification status of ATTINY261A-MN must be confirmed from the current Microchip Technology product documentation before release to a regulated production program. The standard device is primarily positioned as a general-purpose 8-bit AVR microcontroller, and automotive design requirements should not be inferred from its industrial or commercial availability. Request the appropriate compliance and qualification documentation for the exact orderable part.
How should ATTINY261A-MN be placed on a PCB?
Place the ATTINY261A-MN according to the manufacturer’s 32-VQFN land pattern and pin-one orientation, then connect the exposed pad as specified. Put the required supply-decoupling capacitors close to their power pins, maintain a continuous ground reference under the device, and follow the recommended layout for sensitive analog or high-speed signals. The exposed-pad copper area also provides an important thermal path from the microcontroller.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ATTINY261A-MN — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the ATTINY261A-MN for compact control systems whose firmware fits within 2 KB of Flash and whose requirements are covered by 128 B of SRAM, 128 B of EEPROM, 16 I/O lines, and the available timer peripherals. Select ATTINY461A-SU when the same 32-VQFN AVR platform and 20 MHz speed are needed but additional Flash reduces code-size pressure. Select ATTINY861A-SU when substantially more program memory justifies the larger memory configuration. ATTINY261A-SU is the closest family-oriented option, but engineers must review electrical differences caused by manufacturing-process changes. For any replacement, verify the package drawing, pin functions, supply range, clock configuration, fuse behavior, and qualification requirements before releasing the design.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ATTINY261A-SU ATTINY461A-SU ATTINY861A-SU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 32-VQFN (5x5) 32-VQFN (5x5) 32-VQFN (5x5) 32-VQFN (5x5)
Architecture 8-bit AVR RISC 8-bit AVR RISC 8-bit AVR RISC 8-bit AVR RISC
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz 20 MHz
Flash Memory 2 KB 2 KB 4 KB 8 KB
EEPROM 128 B 128 B 128 B 128 B
Internal SRAM 128 B 128 B 128 B 128 B
Operating Supply Voltage 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V
General-Purpose I/O Lines 16 16 16 16
Timer Resources 8-bit timer/counter and 8/10-bit high-speed timer/counter 8-bit timer/counter and 8/10-bit high-speed timer/counter 8-bit timer/counter and 8/10-bit high-speed timer/counter 8-bit timer/counter and 8/10-bit high-speed timer/counter

মূল পার্থক্যসমূহ

  • Lower Flash requirement for compact control firmware (বনামATTINY861A-SU)
  • Intermediate firmware capacity option (বনামATTINY461A-SU)
  • Direct family-device alignment for related controls (বনামATTINY261A-SU)

ডিজাইন নোট

Use the exact 32-VQFN land pattern from the manufacturer package drawing and verify pin-one orientation against the PCB footprint. Place the required bypass capacitors next to the supply and ground pins, maintain short return paths, and provide thermal-via structures beneath the exposed pad as recommended. The 5 mm by 5 mm package is compact, but incorrect pad geometry or exposed-pad connection can prevent reliable assembly and heat transfer.

Design the supply rail for the selected operating point within the 1.8 V to 5.5 V device range. Check input, output, and I/O voltage limits against the datasheet rather than assuming every pin is 5 V tolerant. Decouple the MCU locally and keep switching-regulator and motor-driver switching nodes away from sensitive input traces. Where a 3.3 V rail powers both the MCU and peripherals, confirm that each peripheral meets the same brownout and supply constraints.

Account for the ATTINY261A-MN’s 2 KB Flash limit before committing to firmware architecture. Excess code size can prevent programming or leave insufficient room for boot and configuration routines. Compile with the exact device definition in the toolchain, verify the selected clock and fuse settings, and include a recovery path for programming. Do not substitute a higher-memory family member without reviewing timer mappings, peripheral availability, and application code assumptions.

For designs using the timer inputs, external sensor lines, or communication signals, assign pins from the manufacturer’s alternate-function tables before routing the PCB. Keep oscillator, reset, and sensitive analog connections short and follow the reference layout. If the board also contains relays, motors, or LEDs, separate their return currents from the MCU ground path where possible and place protection components close to the connector or driver stage.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The current Microchip Technology product information should be used for declarations concerning RoHS, REACH, lead-free status, halogen-free status, conflict minerals, and automotive qualification.

ডেটা যাচাই করা হয়েছে: 2026-11-19 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

attiny261a datasheet attiny261a pinout attiny261a su datasheet ATTINY261A-MN datasheet pdf ATTINY261A-MN pinout ATTINY261A-MN 32-VQFN footprint ATTINY261A-MN 20MHz specifications ATTINY261A-MN PWM timer ATTINY261A-MN drop-in replacement ATTINY261A-MN vs ATTINY461A-SU ATTINY261A-MN price ATTINY261A-MN stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology ATTINY261A-MN ATTINY261A-SU ATTINY461A-SU ATTINY861A-SU ATtiny261A AVR architecture AVR enhanced RISC 8-bit microcontroller picoPower embedded microcontroller semiconductor in-system programmable Flash EEPROM SRAM PWM timer/counter 32-VQFN QFN family surface-mount package 1.8 V to 5.5 V supply industrial motor control LED lighting control RoHS REACH
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন