Microchip Technology

ATTINY426-SF - 20MHz AVR Microcontroller | Microchip

MPN: ATTINY426-SF ✓ সক্রিয়
20-pin PDSO Package 20 MHz Speed 4 KB Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ATTINY426-SF সারাংশ

Microchip Technology ATTINY426-SF is an 8-bit AVR tinyAVR 2 microcontroller with a 20 MHz maximum clock, 4 KB Flash memory, 512 bytes SRAM, and 128 bytes EEPROM in a 20-pin SOIC package. The device provides 18 I/O lines and supports I2C, SPI, and two USART serial interfaces for compact embedded-control designs.

An 8-bit microcontroller is a programmable semiconductor containing a CPU, memory, and peripherals on one integrated circuit. The AVR CPU architecture provides deterministic instruction execution, while the tinyAVR 2 family combines low-power operation with event-oriented peripherals. Within the product hierarchy, ATTINY426-SF is an 8-bit microcontroller, an AVR-family embedded controller, and a member of the tinyAVR 2 family of Microchip Technology semiconductors.

The controller operates at up to 20 MHz and includes a hardware multiplier for efficient multiplication-intensive control routines. Its 4 KB Flash stores the application program, while 512 bytes of SRAM support working variables and 128 bytes of EEPROM provide nonvolatile data storage. Dual USART channels allow simultaneous serial communication, while I2C and SPI support bus-based sensors, memories, and external peripherals. An industrial temperature rating extending to 125°C supports demanding embedded environments.

The ATTINY426-SF combines a compact 20-pin SOIC footprint with 18 general-purpose I/O lines. This pin count provides access to digital interfaces while retaining a through-hole-friendly package for prototypes, hand assembly, and mixed-technology assemblies. The multiple serial peripherals reduce the need for external interface devices, which can simplify PCB routing and conserve board area in control, sensing, and communication modules.

Typical uses include industrial sensor controllers, compact serial bridges, motor and actuator control nodes, LED-signage controllers, and low-cost connected equipment. The dual USART interfaces are particularly useful when a design must retain a programming or service channel while another port handles field communication. The I2C and SPI peripherals can connect local sensors, analog converters, or nonvolatile memory without requiring external interface glue.

Designers should preserve the manufacturer-recommended decoupling and oscillator arrangements, validate all peripheral pin multiplexing before final routing, and check the complete pin-description table in the ATtiny424/426/427/824/826/827 datasheet. When firmware depends on exact timer, USART, or event-system behavior, confirm that the selected replacement retains the same peripheral configuration and package pin assignment.

This page combines manufacturer specifications, package and interface details, application guidance, comparison parameters, and practical design notes in one engineering-focused reference. It helps engineers evaluate the ATTINY426-SF for compact AVR-based control systems while distinguishing genuine same-package replacements from devices that require different footprints or board-level redesign.

এর জন্য ড্রপ-ইন বিকল্প ATTINY426-SF — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible ATTINY426-SF (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, SRAM.

Microchip Technology
Package: 20-pin SOIC
SRAM: 1 KB
এর সাথে তুলনা করুন ATTINY426-SF →

ATTINY427-SF

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 20-SOIC
Same 4 KB Flash, 512-byte SRAM, 20 MHz AVR core, and 20-pin SOIC footprint; exact peripheral and pin differences require datasheet confirmation.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ATTINY424-SF

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 20-SOIC
Flash is 2 KB versus 4 KB (-50%), SRAM is 256 bytes versus 512 bytes (-50%), while the AVR core reaches 20 MHz.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ATTINY824-SF

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 20-SOIC
Flash is 8 KB versus 4 KB (+100%) and SRAM is 1 KB versus 512 bytes (+100%); the maximum clock remains 20 MHz.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ATTINY826-SF

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Microchip Technology
📦 20-SOIC
8-bit AVR RISC with hardware multiplier · 20 MHz · 8 KB · 1 KB · 128 bytes · 8 MHz at 2.7 V minimum supply · 2.7 V

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATTINY827-SF

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 20-SOIC
Flash is 8 KB versus 4 KB (+100%) and SRAM is 1 KB versus 512 bytes (+100%); the maximum clock remains 20 MHz.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ATTINY426-SF সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Architecture 8-bit AVR
সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি 20 MHz
Flash Memory 4 KB
Program Memory Organization 4K x 8 bits
SRAM 512 bytes
EEPROM 128 bytes
General-Purpose I/O Lines 18
External Interrupts 18
Serial Interfaces I2C, SPI, and dual USART
Hardware Multiplier Yes
Process Technology CMOS
প্যাকেজ 20-pin PDSO
Package Type 20-SOIC
মাউন্টিং টাইপ Surface Mount
Industrial Temperature Rating Up to 125°C
Product Family tinyAVR 2
RoHS স্ট্যাটাস Green

ATTINY426-SF 20-soic পিন কনফিগারেশন গাইড

ATTINY426-SF (20-soic প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

ATTINY426-SF-এর জন্য 20-soic প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ATTINY426-SF.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ATTINY426-SF এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Controller, Dual Serial Protocol Bridge, Compact Actuator and Motor Node, LED Signage and Display Controller, Connected Equipment Controller, Low-Cost Data Acquisition Module.

🏭

Industrial Sensor Controller

The ATTINY426-SF is well suited to local sensor aggregation because its 20 MHz AVR core provides deterministic control processing while 18 I/O lines leave substantial board-level connectivity. I2C and SPI can connect digital sensors, transceivers, or memory, and the two USART channels can support a service port alongside a field-bus link. The 20-pin SOIC package also supports mixed assembly methods. Firmware must remain within 4 KB of Flash and 512 bytes of SRAM, so interrupt buffers and temporary calculations should be designed conservatively.

🌐

Dual Serial Protocol Bridge

Two USART peripherals make the ATTINY426-SF useful for bridging legacy serial equipment to a modern embedded controller. One USART can connect to a host or service interface while the other communicates with a downstream instrument, while I2C or SPI can expose configuration or logging functions. The device runs up to 20 MHz and includes a hardware multiplier for efficient buffer and protocol processing. Firmware designers should account for baud-rate tolerance, interrupt priority, and the limited 512-byte SRAM when buffering simultaneous traffic.

🔧

Compact Actuator and Motor Node

The ATTINY426-SF can act as a compact actuator-control node when its 18 I/O lines and 20 MHz processing rate satisfy the timing requirements. A timer and PWM-capable pin set can drive motors, valves, relays, or indicators, while USART provides configuration and diagnostics. The controller's 4 KB Flash footprint favors compact, event-driven firmware rather than elaborate algorithms. Validate timer channels, alternate-function pins, output drive limits, and any required isolation or protection components before connecting it directly to inductive loads.

💡

LED Signage and Display Controller

The ATTINY426-SF can manage LED signage, status indicators, and small display-control boards where compactness and multi-protocol connectivity matter. Its 18 I/O lines support multiple digital outputs, and I2C is useful for display drivers or configuration devices. The 20 MHz AVR core can refresh timing-intensive patterns, but firmware size and RAM availability must be checked carefully against buffer counts and animation tables. PWM-capable outputs and timer allocation should be mapped from the manufacturer pin-description table before layout approval.

🧩

Connected Equipment Controller

For compact connected equipment, the ATTINY426-SF can coordinate local controls while exposing service, logging, or host communication through its serial interfaces. The 512-byte SRAM is suitable for short protocol frames and small state machines, and 128 bytes of EEPROM can retain limited configuration values. The device's 20-pin SOIC package simplifies rework compared with leadless alternatives. Firmware should include communication timeout handling and nonvolatile-write wear control, since frequent EEPROM updates can shorten service life.

📊

Low-Cost Data Acquisition Module

The ATTINY426-SF can form the control core of a compact acquisition module that samples sensors, timestamps events, and forwards results through I2C, SPI, or USART. Its 20 MHz clock provides ample execution speed for small acquisition tasks, while 18 I/O lines support sensors and status signals. The 4 KB program limit requires concise drivers and carefully sized sample buffers, and the 512-byte SRAM may require streaming rather than batch processing. Analog front-end and ADC requirements must be verified against the device's full electrical specifications.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

ATTINY424 Lower-memory tinyAVR 2 controller ব্যবহৃত হয়: Industrial Sensor Controller, Dual Serial Protocol Bridge, Connected Equipment Controller ATTINY827 Higher-memory tinyAVR 2 controller ব্যবহৃত হয়: Industrial Sensor Controller, LED Signage and Display Controller, Low-Cost Data Acquisition Module ATTINY824 Higher-memory serial-controller option ব্যবহৃত হয়: Dual Serial Protocol Bridge, LED Signage and Display Controller, Low-Cost Data Acquisition Module ATTINY427 Same-memory tinyAVR 2 family controller ব্যবহৃত হয়: Compact Actuator and Motor Node ATTINY826 Higher-memory tinyAVR 2 control option ব্যবহৃত হয়: Compact Actuator and Motor Node, Connected Equipment Controller
What are the key specifications of ATTINY426-SF that engineers should know?
The ATTINY426-SF is an 8-bit AVR tinyAVR 2 microcontroller rated for operation up to 20 MHz, with 4 KB of Flash memory, 512 bytes of SRAM, and 128 bytes of EEPROM. According to the Microchip Technology ATtiny424/426/427/824/826/827 datasheet, it provides 18 I/O lines and supports I2C, SPI, and two USART interfaces. The device is offered in a 20-pin SOIC package and is identified as an industrial-temperature, green product.
Where can I download the ATTINY426-SF datasheet PDF?
The ATTINY426-SF datasheet PDF is available directly from the Microchip Technology document link on this page. The primary document is the ATtiny424/426/427/824/826/827 Data Sheet, identified as DS40002311A in the manufacturer filename. It covers the tinyAVR 2 family, including the ATTINY426 device, its memory configuration, peripherals, electrical characteristics, and package information.
Where can I find the ATTINY426-SF pinout?
The ATTINY426-SF pinout is shown in the pin-description section and package drawings of the Microchip Technology ATtiny424/426/427/824/826/827 datasheet. The target uses a 20-pin PDSO or 20-SOIC package, but individual pin names must be assigned from the manufacturer diagram rather than inferred from the distributor summary. Use that table when assigning PCB nets and checking alternate-function multiplexing.
What can replace the ATTINY426-SF on the same board?
The closest replacements are same-family tinyAVR 2 controllers configured for a 20-pin SOIC footprint, but firmware and board compatibility must be checked in detail. ATTINY427-family and 824/826/827-family options can provide different Flash, SRAM, or peripheral arrangements while retaining the 20 MHz AVR architecture. Confirm the exact package pins, peripheral mapping, voltage limits, and memory requirements before approving a replacement.
Is ATTINY426-SF the same as ATTINY827?
No, the ATTINY426-SF and ATTINY827 are not identical devices. The ATTINY426-SF has 4 KB of Flash, 512 bytes of SRAM, and 128 bytes of EEPROM, while the ATTINY827 is identified within the same tinyAVR 2 data sheet as an 8 KB and 1 KB member. They can be considered for a redesigned 20-pin implementation, but memory differences and exact peripheral assignments must be validated.
ATTINY426-SF vs ATTINY824 - which is better for a memory-constrained design?
The ATTINY426-SF is the better fit when 4 KB of Flash, 512 bytes of SRAM, and 128 bytes of EEPROM are sufficient. The ATTINY824 offers 8 KB of Flash and 1 KB of SRAM, doubling each of those working memories according to the family data sheet. Although both belong to the tinyAVR 2 family and can be evaluated in 20-pin implementations, the larger memory of the ATTINY824 benefits more complex firmware.
When should I choose ATTINY426-SF instead of an ATtiny426 in another package?
Choose ATTINY426-SF when the target PCB is designed around the 20-pin SOIC footprint and requires the industrial-temperature option. The exact package suffix determines mechanical fit, temperature grade, and ordering configuration, so an ATTINY426 offered in VQFN or SSOP cannot be soldered directly into a 20-SOIC footprint. Select a same-package ordering code when no PCB change is permitted.
Is ATTINY426-SF suitable for industrial sensor control?
Yes, the ATTINY426-SF is suitable for compact industrial sensor-control designs that fit within its 4 KB Flash and 512-byte SRAM limits. Its 20 MHz AVR processor, 18 I/O lines, I2C, SPI, dual USART peripherals, and industrial rating up to 125°C support local sensing and communications. Ensure the operating voltage, ADC requirements, environmental qualification, and watchdog behavior match the system specification.
What are the power and thermal considerations for ATTINY426-SF?
Power use depends on the selected clock, operating voltage, peripherals, sleep mode, and I/O activity, so the applicable current figures should be read from the manufacturer's electrical-characteristics tables. The 20-pin SOIC package provides a practical thermal path on a PCB, but sustained high clock activity can still increase junction temperature. Provide the recommended supply decoupling and keep the device within its specified operating temperature range.
How does ATTINY426-SF support serial communication?
The ATTINY426-SF supports two USART channels plus I2C and SPI, according to the Microchip Technology family data sheet. This provides flexible options for programming, service communication, sensor access, and external data storage. Before assigning pins, inspect the pin-description table because alternate-function selection and peripheral availability depend on the package and device configuration.
Is ATTINY426-SF RoHS compliant?
The ATTINY426-SF is described as a green device by Microchip Technology, which is the manufacturer's environmental designation used in the product listing. RoHS status, lead-free construction, halogen-free status, and REACH status should be confirmed on the current manufacturer product page or material-declaration documentation. No AEC-Q100 automotive qualification is established by the manufacturer product information.
Can ATTINY426-SF replace ATtiny424?
A direct ATTINY426-SF replacement for an ATtiny424 requires package and pin verification because the ATtiny424 family member has less Flash and SRAM than the ATTINY426. The ATTINY424 is associated with 2 KB of Flash and 256 bytes of SRAM, while the ATTINY426 has 4 KB and 512 bytes. If the existing design uses a compatible 20-pin layout and firmware fits both devices, the larger ATTINY426 can support the application, subject to pin-level review.
Where to buy ATTINY426-SF online?
Use the Request a Quote form on this page to ask for ATTINY426-SF availability, order processing, and current lead time. The exact part number identifies the 20-SOIC, 20 MHz, 4 KB Flash device. A purchasing request should include the required quantity, delivery location, and acceptable packaging configuration so the supplier can confirm the correct orderable configuration.
What is the price of ATTINY426-SF?
The current ATTINY426-SF price is not displayed in the structured product data because market pricing can change by quantity and order date. Submit the target MPN through the Request a Quote form on this page for a current quotation. The request should state the quantity needed and packaging preference so pricing can be matched to the exact ATTINY426-SF configuration.
What is the lead time and stock status for ATTINY426-SF?
The Request a Quote form on this page is the appropriate route for confirming current ATTINY426-SF stock, minimum order quantity, and lead time. The manufacturer product page and distributor listing identify the component, but a live manufacturing or inventory commitment should be made for the actual purchase order. Include the desired quantity and target delivery date when requesting the quotation.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ATTINY426-SF — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the ATTINY426-SF when a compact 8-bit AVR controller with 4 KB of Flash, 512 bytes of SRAM, 128 bytes of EEPROM, 18 I/O lines, and integrated I2C, SPI, and dual USART peripherals fits the application. Its 20-pin SOIC package is useful for prototypes, mixed assembly, and designs that prefer a larger lead pitch than VQFN. Choose the ATTINY427-SF when the same memory class and 20 MHz core are needed but a different family-member feature set better matches the design. The ATTINY424-SF is appropriate only when 2 KB of Flash and 256 bytes of SRAM are sufficient. Choose an ATTINY824-SF, ATTINY826-SF, or ATTINY827-SF when the expanded 8 KB Flash and 1 KB SRAM simplify firmware architecture or support larger buffers. In every replacement decision, verify the manufacturer pin-description table, package drawing, operating voltage, peripheral multiplexing, and application firmware before releasing a production order.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ATTINY427-SF ATTINY424-SF ATTINY824-SF ATTINY826-SF ATTINY827-SF
Package 20-SOIC 20-SOIC 20-SOIC 20-SOIC 20-SOIC 20-SOIC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
CPU Architecture 8-bit AVR 8-bit AVR 8-bit AVR 8-bit AVR 8-bit AVR 8-bit AVR
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz
Flash Memory 4 KB 4 KB 2 KB 8 KB 8 KB 8 KB
SRAM 512 bytes 512 bytes 256 bytes 1 KB 1 KB 1 KB
EEPROM 128 bytes 128 bytes 128 bytes 128 bytes 128 bytes 128 bytes
Hardware Multiplier Yes Yes Yes Yes Yes Yes

মূল পার্থক্যসমূহ

  • Balanced memory configuration for compact embedded control (বনামATTINY424-SF)
  • More firmware and RAM space than the target without changing clock class (বনামATTINY827-SF)
  • Multiple integrated serial interfaces reduce external interface requirements (বনামATTINY424-SF)
  • Industrial-temperature 20-pin SOIC option for mixed assembly (বনামATTINY427-SF)

ডিজাইন নোট

Place the ATTINY426-SF in accordance with the manufacturer package drawing and route all 20 pins to the correct net names from the pin-description table. The SOIC package is suitable for mixed assembly, but the exposed signal assignments still need schematic review. Keep the oscillator, programming interface, supply pins, and decoupling components positioned to minimize loop area and make the board serviceable.

Use the supply voltage range and decoupling values specified in the Microchip Technology datasheet for the selected operating mode. Separate analog and digital return paths where the board measures sensitive signals, and avoid routing switching-node current through the controller ground reference. Firmware that idles between events can reduce average consumption, but sleep-mode wakeup behavior and peripheral state should be tested under real operating conditions.

Do not select a replacement solely because it is an ATtiny426-family member. Confirm the exact 20-pin package, pin multiplexing, clock behavior, timer assignments, serial channels, memory footprint, and supply range. The ATTINY824, ATTINY826, and ATTINY827 provide more Flash and SRAM than the ATTINY426, while the ATTINY424 provides less; each difference can affect both firmware fit and board compatibility.

Assign I2C and SPI nets with attention to signal integrity, especially when bus capacitance or cable length increases. Keep serial communication lines away from switching regulators and high-current actuator outputs, and follow the datasheet recommendations for pull-ups where required. Because the ATTINY426-SF has 18 I/O lines, multiplexed functions must be checked early so that no peripheral assignment creates a routing conflict.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The Microchip product information identifies ATTINY426-SF as a green industrial-temperature product. Specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification statements require confirmation from current manufacturer compliance documentation.

ডেটা যাচাই করা হয়েছে: 2026-11-09 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

attiny426 datasheet ATTINY426-SF datasheet pdf ATTINY426-SF pinout ATTINY426-SF specifications ATTINY426-SF equivalent ATTINY426-SF replacement ATTINY426-SF drop-in substitute ATTINY426-SF vs ATTINY827 ATTINY426-SF SOIC-20 footprint ATTINY426-SF application circuit Microchip ATTINY426-SF ATTINY426-SF price ATTINY426-SF stock ATTINY426-SF lead time ATTINY426-SF where to buy

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology ATTINY426-SF ATTINY426 ATTINY424 ATTINY427 ATTINY824 ATTINY826 ATTINY827 AVR CPU tinyAVR 2 8-bit microcontroller embedded microcontroller semiconductor I2C SPI USART dual USART hardware multiplier Flash memory SRAM EEPROM 20-pin SOIC PDSO package surface mount industrial temperature
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন