ATTINY426-SF - 20MHz AVR Microcontroller | Microchip
MPN: ATTINY426-SF ✓ فعالATTINY426-SF نمای کلی
An 8-bit microcontroller is a programmable semiconductor containing a CPU, memory, and peripherals on one integrated circuit. The AVR CPU architecture provides deterministic instruction execution, while the tinyAVR 2 family combines low-power operation with event-oriented peripherals. Within the product hierarchy, ATTINY426-SF is an 8-bit microcontroller, an AVR-family embedded controller, and a member of the tinyAVR 2 family of Microchip Technology semiconductors.
The controller operates at up to 20 MHz and includes a hardware multiplier for efficient multiplication-intensive control routines. Its 4 KB Flash stores the application program, while 512 bytes of SRAM support working variables and 128 bytes of EEPROM provide nonvolatile data storage. Dual USART channels allow simultaneous serial communication, while I2C and SPI support bus-based sensors, memories, and external peripherals. An industrial temperature rating extending to 125°C supports demanding embedded environments.
The ATTINY426-SF combines a compact 20-pin SOIC footprint with 18 general-purpose I/O lines. This pin count provides access to digital interfaces while retaining a through-hole-friendly package for prototypes, hand assembly, and mixed-technology assemblies. The multiple serial peripherals reduce the need for external interface devices, which can simplify PCB routing and conserve board area in control, sensing, and communication modules.
Typical uses include industrial sensor controllers, compact serial bridges, motor and actuator control nodes, LED-signage controllers, and low-cost connected equipment. The dual USART interfaces are particularly useful when a design must retain a programming or service channel while another port handles field communication. The I2C and SPI peripherals can connect local sensors, analog converters, or nonvolatile memory without requiring external interface glue.
Designers should preserve the manufacturer-recommended decoupling and oscillator arrangements, validate all peripheral pin multiplexing before final routing, and check the complete pin-description table in the ATtiny424/426/427/824/826/827 datasheet. When firmware depends on exact timer, USART, or event-system behavior, confirm that the selected replacement retains the same peripheral configuration and package pin assignment.
This page combines manufacturer specifications, package and interface details, application guidance, comparison parameters, and practical design notes in one engineering-focused reference. It helps engineers evaluate the ATTINY426-SF for compact AVR-based control systems while distinguishing genuine same-package replacements from devices that require different footprints or board-level redesign.
جایگزینهای drop-in برای ATTINY426-SF — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای ATTINY426-SF (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, SRAM.
ATTINY427-SF
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
ATTINY424-SF
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
ATTINY824-SF
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
ATTINY826-SF
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATTINY827-SF
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
ATTINY426-SF حداکثر مقادیر مجاز و مشخصات الکتریکی
| Architecture | 8-bit AVR |
| حداکثر فرکانس کلاک | 20 MHz |
| Flash Memory | 4 KB |
| Program Memory Organization | 4K x 8 bits |
| SRAM | 512 bytes |
| EEPROM | 128 bytes |
| General-Purpose I/O Lines | 18 |
| External Interrupts | 18 |
| Serial Interfaces | I2C, SPI, and dual USART |
| Hardware Multiplier | Yes |
| Process Technology | CMOS |
| بستهبندی | 20-pin PDSO |
| Package Type | 20-SOIC |
| نوع نصب | Surface Mount |
| Industrial Temperature Rating | Up to 125°C |
| Product Family | tinyAVR 2 |
| وضعیت RoHS | Green |
راهنمای پیکربندی پین ATTINY426-SF 20-soic
پیکربندی پین برای ATTINY426-SF (پکیج 20-soic). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای ATTINY426-SF.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ATTINY426-SF مناسب است برای 6 کاربردs: Industrial Sensor Controller, Dual Serial Protocol Bridge, Compact Actuator and Motor Node, LED Signage and Display Controller, Connected Equipment Controller, Low-Cost Data Acquisition Module.
Industrial Sensor Controller
The ATTINY426-SF is well suited to local sensor aggregation because its 20 MHz AVR core provides deterministic control processing while 18 I/O lines leave substantial board-level connectivity. I2C and SPI can connect digital sensors, transceivers, or memory, and the two USART channels can support a service port alongside a field-bus link. The 20-pin SOIC package also supports mixed assembly methods. Firmware must remain within 4 KB of Flash and 512 bytes of SRAM, so interrupt buffers and temporary calculations should be designed conservatively.
پیشنهادی
Dual Serial Protocol Bridge
Two USART peripherals make the ATTINY426-SF useful for bridging legacy serial equipment to a modern embedded controller. One USART can connect to a host or service interface while the other communicates with a downstream instrument, while I2C or SPI can expose configuration or logging functions. The device runs up to 20 MHz and includes a hardware multiplier for efficient buffer and protocol processing. Firmware designers should account for baud-rate tolerance, interrupt priority, and the limited 512-byte SRAM when buffering simultaneous traffic.
پیشنهادی
Compact Actuator and Motor Node
The ATTINY426-SF can act as a compact actuator-control node when its 18 I/O lines and 20 MHz processing rate satisfy the timing requirements. A timer and PWM-capable pin set can drive motors, valves, relays, or indicators, while USART provides configuration and diagnostics. The controller's 4 KB Flash footprint favors compact, event-driven firmware rather than elaborate algorithms. Validate timer channels, alternate-function pins, output drive limits, and any required isolation or protection components before connecting it directly to inductive loads.
پیشنهادی
LED Signage and Display Controller
The ATTINY426-SF can manage LED signage, status indicators, and small display-control boards where compactness and multi-protocol connectivity matter. Its 18 I/O lines support multiple digital outputs, and I2C is useful for display drivers or configuration devices. The 20 MHz AVR core can refresh timing-intensive patterns, but firmware size and RAM availability must be checked carefully against buffer counts and animation tables. PWM-capable outputs and timer allocation should be mapped from the manufacturer pin-description table before layout approval.
پیشنهادی
Connected Equipment Controller
For compact connected equipment, the ATTINY426-SF can coordinate local controls while exposing service, logging, or host communication through its serial interfaces. The 512-byte SRAM is suitable for short protocol frames and small state machines, and 128 bytes of EEPROM can retain limited configuration values. The device's 20-pin SOIC package simplifies rework compared with leadless alternatives. Firmware should include communication timeout handling and nonvolatile-write wear control, since frequent EEPROM updates can shorten service life.
پیشنهادی
Low-Cost Data Acquisition Module
The ATTINY426-SF can form the control core of a compact acquisition module that samples sensors, timestamps events, and forwards results through I2C, SPI, or USART. Its 20 MHz clock provides ample execution speed for small acquisition tasks, while 18 I/O lines support sensors and status signals. The 4 KB program limit requires concise drivers and carefully sized sample buffers, and the 512-byte SRAM may require streaming rather than batch processing. Analog front-end and ADC requirements must be verified against the device's full electrical specifications.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای ATTINY426-SF — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | ATTINY427-SF | ATTINY424-SF | ATTINY824-SF | ATTINY826-SF | ATTINY827-SF |
|---|---|---|---|---|---|---|
| Package | 20-SOIC | 20-SOIC | 20-SOIC | 20-SOIC | 20-SOIC | 20-SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Architecture | 8-bit AVR | 8-bit AVR | 8-bit AVR | 8-bit AVR | 8-bit AVR | 8-bit AVR |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 4 KB | 4 KB | 2 KB | 8 KB | 8 KB | 8 KB |
| SRAM | 512 bytes | 512 bytes | 256 bytes | 1 KB | 1 KB | 1 KB |
| EEPROM | 128 bytes | 128 bytes | 128 bytes | 128 bytes | 128 bytes | 128 bytes |
| Hardware Multiplier | Yes | Yes | Yes | Yes | Yes | Yes |
تفاوتهای کلیدی
- Balanced memory configuration for compact embedded control (در مقابلATTINY424-SF)
- More firmware and RAM space than the target without changing clock class (در مقابلATTINY827-SF)
- Multiple integrated serial interfaces reduce external interface requirements (در مقابلATTINY424-SF)
- Industrial-temperature 20-pin SOIC option for mixed assembly (در مقابلATTINY427-SF)
یادداشتهای طراحی
Place the ATTINY426-SF in accordance with the manufacturer package drawing and route all 20 pins to the correct net names from the pin-description table. The SOIC package is suitable for mixed assembly, but the exposed signal assignments still need schematic review. Keep the oscillator, programming interface, supply pins, and decoupling components positioned to minimize loop area and make the board serviceable.
Use the supply voltage range and decoupling values specified in the Microchip Technology datasheet for the selected operating mode. Separate analog and digital return paths where the board measures sensitive signals, and avoid routing switching-node current through the controller ground reference. Firmware that idles between events can reduce average consumption, but sleep-mode wakeup behavior and peripheral state should be tested under real operating conditions.
Do not select a replacement solely because it is an ATtiny426-family member. Confirm the exact 20-pin package, pin multiplexing, clock behavior, timer assignments, serial channels, memory footprint, and supply range. The ATTINY824, ATTINY826, and ATTINY827 provide more Flash and SRAM than the ATTINY426, while the ATTINY424 provides less; each difference can affect both firmware fit and board compatibility.
Assign I2C and SPI nets with attention to signal integrity, especially when bus capacitance or cable length increases. Keep serial communication lines away from switching regulators and high-current actuator outputs, and follow the datasheet recommendations for pull-ups where required. Because the ATTINY426-SF has 18 I/O lines, multiplexed functions must be checked early so that no peripheral assignment creates a routing conflict.
اطلاعات انطباق
The Microchip product information identifies ATTINY426-SF as a green industrial-temperature product. Specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification statements require confirmation from current manufacturer compliance documentation.