Microchip Technology

ATTINY44-20MU - 20MHz 8-Bit AVR MCU | Microchip

MPN: ATTINY44-20MU ✓ সক্রিয়
2.7 V to 5.5 V Vdss 20-QFN-EP, 4 x 4 mm Package 20 MHz Speed 4 KB (2K x 16 bytes) Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ATTINY44-20MU সারাংশ

The Microchip Technology ATTINY44-20MU is an 8-bit AVR RISC microcontroller operating at up to 20 MHz, with 4 KB of flash memory, 256 bytes of SRAM, and 256 bytes of EEPROM in a 20-QFN-EP package measuring 4 x 4 mm. It provides 12 general-purpose I/O lines and integrates an ADC, USI, timers, and PWM channels for compact embedded-control designs.

An 8-bit AVR microcontroller is a RISC-based semiconductor that executes compact machine instructions from nonvolatile flash memory. The ATTINY44 belongs to the ATtiny family within the broader hierarchy of embedded microcontroller, processor, and integrated-circuit devices. Its combination of 4 KB program memory, 256 bytes of SRAM, and 12 I/O lines suits compact control, sensing, communication, and low-power peripheral designs.

Key features include 20 MHz maximum operating frequency, 4 KB of in-system-programmable flash, 256 bytes of EEPROM, and 256 bytes of SRAM. The mixed-signal peripherals include a 10-bit ADC and USI, while two timer/counter blocks provide PWM outputs and timing functions. The 20-QFN-EP package also allows a compact PCB footprint and exposes a thermal pad for improved board-level heat spreading.

The device uses an advanced RISC architecture with 32 general-purpose working registers and a Harvard-style separation of program and data memories. In-system programming supports configuration without a separate programming socket. Its small memory organization is useful for dedicated control tasks where a full operating system would add unnecessary complexity. Firmware must respect the limited 4 KB flash and 256-byte SRAM budgets.

Typical uses include compact sensor nodes, industrial control modules, LED lighting controllers, small motor-control boards, and UART-connected instruments. The ADC supports analog measurements, the USI can serve serial or bus-oriented communication tasks, and the PWM channels simplify dimming, proportional control, or waveform generation without external timers.

PCB design should preserve access to the exposed pad, provide clean power and ground connections, and place decoupling capacitance close to the supply pins. Firmware designers should budget SRAM carefully and use the chip’s timer resources rather than polling delays when precision timing is required. The manufacturer datasheet should be used for the exact pad assignment and programming connections.

This product data combines the exact ATTINY44-20MU memory and package specifications with application guidance, package-level comparisons, programming references, and verified drop-in alternatives. It is intended to accelerate engineering selection while clearly separating electrical facts from design recommendations.

এর জন্য ড্রপ-ইন বিকল্প ATTINY44-20MU — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible ATTINY44-20MU (একই form factor এবং footprint) — পার্থক্য রয়েছে PWM Channels, Flash Memory, SRAM, Package, EEPROM Memory.

Microchip Technology
PWM Channels: 2 per timer/counter
Flash Memory: 2 KB (1K x 16 bits)
SRAM: 128 bytes
এর সাথে তুলনা করুন ATTINY44-20MU →
Microchip Technology
PWM Channels: 2
Package: 20-VQFN (3 x 3 mm)
এর সাথে তুলনা করুন ATTINY44-20MU →
Microchip Technology
PWM Channels: 2
Flash Memory: 4 KB in-system programmable Flash
SRAM: 256 B
এর সাথে তুলনা করুন ATTINY44-20MU →
Microchip Technology
PWM Channels: 2 channels per timer/counter section
Flash Memory: 8 KB (4K x 16 bits)
SRAM: 512 bytes
এর সাথে তুলনা করুন ATTINY44-20MU →

ATTINY44A-MU

✅ ড্রপ-ইন
Microchip Technology
📦 20-QFN-EP (4x4)
8-bit RISC-based AVR microcontroller · ATtiny44A TinyAVR · 20 MHz · 4 KB in-system programmable Flash · 256 B · 256 B · 12 · 32

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATTINY44A-MMH

✅ ড্রপ-ইন
Microchip Technology
📦 20-QFN-EP (4x4)
8-bit RISC microcontroller · AVR enhanced RISC · 20 MHz · 4 KB · 2K x 16 · 256 bytes · 256 bytes · 12

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATTINY84-20MU

✅ ড্রপ-ইন
Microchip Technology
📦 20-QFN-EP (4x4)
8-bit AVR Flash Microcontroller · 20 MHz · 8 KB (4K x 16 bits) · 512 bytes · 512 bytes · 12 pins · 10 bits · 8 channels

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATTINY44-20MU সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type 8-bit AVR RISC microcontroller
সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি 20 MHz
Flash Memory 4 KB (2K x 16 bytes)
EEPROM Memory 256 bytes
SRAM 256 bytes
General-Purpose I/O Lines 12 lines
General-Purpose Working Registers 32 registers
Architecture Advanced RISC
ADC 10-bit ADC
USI Universal Serial Interface
Timer/Counter Blocks 2 timer/counter blocks
PWM Channels 4 PWM channels
Operating Voltage 2.7 V to 5.5 V
প্যাকেজ 20-QFN-EP, 4 x 4 mm
মাউন্টিং টাইপ Surface mount
Programming In-system programmable

ATTINY44-20MU 20-qfn-ep, 4 x 4 mm পিন কনফিগারেশন গাইড

ATTINY44-20MU (20-qfn-ep, 4 x 4 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

ATTINY44-20MU-এর জন্য 20-qfn-ep, 4 x 4 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ATTINY44-20MU.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ATTINY44-20MU এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Compact Sensor Node, UART Connected Control Module, LED Lighting Controller, Small Motor Control, Industrial Interface Module, Programmable Logic Controller.

🧩

Compact Sensor Node

The ATTINY44-20MU fits a compact sensor node because its 10-bit ADC can sample analog inputs while the 20 MHz AVR core performs local filtering and control. The device provides 256 bytes of SRAM and 4 KB of flash, so firmware must use small buffers and avoid memory-heavy libraries. It is particularly appropriate for a battery-powered environmental monitor that periodically wakes, converts sensor readings, updates an indicator, and returns to a low-power state. Its 20-QFN-EP package also preserves PCB area in a densely populated sensor assembly.

🌐

UART Connected Control Module

The ATTINY44-20MU is suitable for a UART-connected control module when the device needs local logic, timers, and analog support without a larger processor. Its 20 MHz clock provides adequate response time for command parsing, debouncing, and actuator updates, while the 12 I/O lines leave several pins available for status LEDs or digital inputs. The 256-byte SRAM is sufficient for short message buffers but not large frame accumulation. Firmware should use the exact UART pin assignment and clock configuration from the manufacturer datasheet before finalizing the board.

💡

LED Lighting Controller

The ATTINY44-20MU can control LED lighting because its timer/counter blocks provide four PWM channels and 12 general-purpose I/O lines. It can implement dimming, fades, status patterns, and simple power sequencing without an external timing controller. The 4 KB flash is adequate for a focused lighting routine, and the 20 MHz core allows PWM updates and button handling to share the device. Use transistor or MOSFET drive stages where the LED string current exceeds the MCU output limits, and check the exposed-pad connection for effective heat spreading.

🏭

Small Motor Control

The ATTINY44-20MU is practical for a small closed-loop or duty-cycle motor controller because its four PWM channels can command power stages, its timers can establish periods, and its ADC can monitor a feedback signal. The 20 MHz processing rate supports responsive control calculations, while 256 bytes of SRAM is suitable for modest state variables rather than large motion-control algorithms. The device should not drive a motor directly; use a suitable gate driver and power MOSFET stage. Validate startup behavior, current limits, and thermal conditions at the worst mechanical load.

🏭

Industrial Interface Module

The ATTINY44-20MU works well in a small industrial interface module that converts discrete inputs and analog measurements into protocol data. Its 12 I/O lines support switches, alarm outputs, and status signaling, while the ADC adds measurement capability without requiring a separate converter. The ATtiny architecture executes a single event loop efficiently, although the 4 KB flash and 256-byte SRAM require disciplined firmware organization. Industrial equipment should also include appropriate input protection, isolation, surge handling, and grounding beyond the MCU itself.

🔧

Programmable Logic Controller

The ATTINY44-20MU can act as a compact programmable logic controller for deterministic tasks such as relay sequencing, pulse counting, time-based interlocks, and simple alarm logic. Two timer/counter blocks and four PWM outputs provide useful timing resources, while 12 I/O lines permit a mixture of inputs and outputs. Its 20 MHz clock and in-system programming support fast development and field updates. Because memory is limited, organize execution as a scheduled state machine, retain critical configuration in EEPROM, and include watchdog recovery in production firmware.

What are the key specifications of ATTINY44-20MU that engineers should know?
The ATTINY44-20MU is an 8-bit AVR RISC microcontroller with a 20 MHz maximum clock, 4 KB of flash, 256 bytes of SRAM, 256 bytes of EEPROM, and 12 general-purpose I/O lines. According to the Microchip manufacturer datasheet and product page, it also includes a 10-bit ADC, Universal Serial Interface, two timer/counter blocks, four PWM channels, and a compact 20-QFN-EP package measuring 4 x 4 mm.
Where can I download the ATTINY44-20MU datasheet PDF?
The official ATTINY44-20MU documentation is available through the Microchip ATTINY44 product page at https://www.microchip.com/en-us/product/ATTINY44. The manufacturer datasheet describes the 20 MHz AVR core, memory organization, ADC, USI, timers, power characteristics, and package information. Use the manufacturer copy for design decisions because archived third-party copies may not include the latest revision or exact pad assignments.
Where can I find the ATTINY44 pinout?
The ATTINY44 pinout is documented in the pin-description and package drawings of the Microchip manufacturer datasheet linked from https://www.microchip.com/en-us/product/ATTINY44. The ATTINY44-20MU uses a 20-QFN-EP package with an exposed pad, so PCB designers should check both the numbered perimeter pads and the exposed thermal-pad connection. Use those drawings when assigning tracks and programming signals.
How do I program an ATTINY44-20MU?
The ATTINY44-20MU supports in-system programming, allowing firmware to be written while the device remains mounted on the target board. The Microchip manufacturer datasheet identifies the programming interface and required power conditions. A compatible AVR programmer and the appropriate programming connector are needed. Confirm the selected programmer supports the ATtiny44 family and use the exact signal names from the device pin description.
How much memory does the ATTINY44-20MU have?
The ATTINY44-20MU contains 4 KB of flash memory organized as 2K x 16 bytes, along with 256 bytes of SRAM and 256 bytes of EEPROM. According to the Microchip manufacturer datasheet, flash stores the program, SRAM supports runtime variables and stack operations, and EEPROM provides nonvolatile data storage. The 256-byte SRAM budget is the principal constraint for buffering and library selection.
What is the ATTINY44-20MU clock speed and supply voltage?
The ATTINY44-20MU operates at up to 20 MHz and supports a 2.7 V to 5.5 V operating-voltage range. According to the Microchip manufacturer datasheet, this supports both 3.3 V and 5 V system designs while providing higher processing throughput than lower-speed ATtiny configurations. Confirm the clock fuse, external clock arrangement, and brownout settings when configuring the device for a particular board.
What peripherals are integrated into the ATTINY44-20MU?
The ATTINY44-20MU integrates a 10-bit ADC, Universal Serial Interface, two timer/counter blocks, and four PWM channels alongside its AVR core and 12 I/O lines. According to the Microchip manufacturer datasheet, the ADC handles analog inputs, the USI supports serial communication, and the timers provide timing and PWM functions. These peripherals reduce the need for external interface or timing ICs.
ATTINY44 vs ATTINY84 - what is the main difference?
The ATTINY44 provides 4 KB of flash, 256 bytes of SRAM, and 256 bytes of EEPROM, while the ATTINY84 provides 8 KB of flash, 512 bytes of SRAM, and 512 bytes of EEPROM and offers a larger ADC. The ATTINY84-20MU retains the 20-QFN-EP format and is a practical drop-in choice when the same board needs additional memory or ADC capacity. The exact pin-level differences must still be checked against the manufacturer datasheets.
Can ATTINY44A-MU replace ATTINY44-20MU?
The ATTINY44A-MU can serve as a drop-in replacement for the ATTINY44-20MU because both are 20 MHz, 4 KB-flash ATtiny44-family devices in the 20-QFN-EP package. The newer ATTINY44A generation also provides a 256-byte EEPROM and 256 bytes of SRAM, matching the target device’s core memory configuration. Review the manufacturer datasheets for electrical, errata, and legacy-versus-current generation details before production release.
What can replace ATTINY44-20MU on an existing PCB?
The strongest drop-in replacement is the ATTINY44A-MU because it retains the 20 MHz clock, 4 KB flash, 256-byte SRAM, 256-byte EEPROM, and 20-QFN-EP footprint of the ATTINY44-20MU. The ATTINY44A-MMH and ATTINY84-20MU are additional same-package candidates with respectively an alternate ordering designation and greater memory capacity. Confirm the exposed-pad connection and complete pin-assignment review before substitution.
When should I choose ATTINY44-20MU over ATTINY84-20MU?
Choose the ATTINY44-20MU when a compact design only needs 4 KB of flash, 256 bytes of SRAM, and a basic 10-bit ADC, making it appropriate for focused control functions. Select the ATTINY84-20MU when firmware growth, larger working-memory requirements, more EEPROM, or a larger ADC justify the additional resources. Both support a 20 MHz clock and use the 20-QFN-EP format, but their ADC and memory capabilities differ.
Is ATTINY44-20MU suitable for UART communication projects?
The ATTINY44-20MU is suitable for compact UART-based projects because it combines a 20 MHz AVR core with 12 I/O lines, timers, and 256 bytes of SRAM. The UART-related peripheral details and pin assignments should be taken from the Microchip manufacturer datasheet. Use a logic-level interface when connecting to a 3.3 V host, and add a suitable transceiver such as MAX3221IPWR when a traditional RS-232 voltage interface is required.
Where can I buy ATTINY44-20MU online?
Use the Request a Quote form on this page to request ATTINY44-20MU availability, MOQ, and delivery terms for the exact 20-QFN-EP orderable MPN. The component is also identified by the exact manufacturer part number ATTINY44-20MU in catalog listings, which helps prevent confusion with tape-and-reel order codes or related ATtiny44 devices. Confirm the requested packaging and quantity before placing an order.
What is the lead time for ATTINY44-20MU?
The current production and delivery lead time for ATTINY44-20MU should be requested through the Request a Quote form on this page using the exact MPN and required quantity. Lead time can vary with order quantity, packaging, inventory position, and supply conditions. Do not substitute a related ATtiny44 order code when requesting a quotation because packaging and operational suffixes can distinguish separate catalog items.
Is ATTINY44-20MU currently available and active?
The Microchip ATTINY44 product family is listed as an active product line on the manufacturer’s ATTINY44 product page, and the exact ATTINY44-20MU is present in current distributor catalogs. The ATTINY44-20MU is specified as an 8-bit, 20 MHz AVR microcontroller with 4 KB flash in a 20-QFN-EP package. Request a quote for current stock status, lead time, and orderable packaging through the Request a Quote form.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ATTINY44-20MU — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the ATTINY44-20MU when a board needs a compact 20 MHz AVR controller with 4 KB flash, 256 bytes of SRAM, 12 I/O lines, ADC, USI, timers, and PWM without moving to a larger package. Choose the ATTINY44A-MU when you want the closest current-generation alternative with the same core memory configuration and footprint. Choose the ATTINY44A-MMH when that same electrical configuration and package are available under a different ordering designation. Choose the ATTINY84-20MU when the existing PCB can accept a larger ADC and the firmware needs 8 KB flash plus 512 bytes each of SRAM and EEPROM. For any substitution, verify the exposed-pad connection, pin multiplexing, oscillator settings, and ADC channel assignments against the manufacturer datasheets.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ATTINY44A-MU ATTINY44A-MMH ATTINY84-20MU
Package 20-QFN-EP (4x4) 20-QFN-EP (4x4) 20-QFN-EP (4x4) 20-QFN-EP (4x4)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Architecture 8-bit AVR RISC 8-bit AVR RISC 8-bit AVR RISC 8-bit AVR RISC
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz 20 MHz
Flash Memory 4 KB 4 KB 4 KB 8 KB
SRAM 256 bytes 256 bytes 256 bytes 512 bytes
EEPROM 256 bytes 256 bytes 256 bytes 512 bytes
ADC 10-bit ADC 10-bit ADC 10-bit ADC Larger ADC
USI Universal Serial Interface Universal Serial Interface Universal Serial Interface Universal Serial Interface
PWM Channels 4 channels 4 channels 4 channels 4 channels

মূল পার্থক্যসমূহ

  • Direct same-generation footprint match (বনামATTINY44A-MU)
  • Memory expansion without changing the package (বনামATTINY84-20MU)
  • Orderable same-family alternative (বনামATTINY44A-MMH)

ডিজাইন নোট

Place the decoupling capacitor immediately between the supply and ground pins, and connect the exposed thermal pad to the appropriate ground plane according to the package drawing. The 20-QFN-EP body provides only 4 x 4 mm of board area, so solder mask spacing, via placement, and thermal-pad fill must follow the manufacturer land-pattern recommendations. Keep high-current switching nodes and inductive traces away from the ADC and oscillator nets.

The device supports a 2.7 V to 5.5 V operating range, but the selected supply voltage affects clock limits, output levels, and peripheral behavior. Use a regulator with adequate transient response and noise performance for the board rather than adding capacitance solely to compensate for an unstable source. Check absolute maximum and recommended operating conditions in the manufacturer datasheet, especially when designing at the voltage limits or using high-speed clock operation.

The ATTINY44 has only 256 bytes of SRAM, so stack-heavy interrupt routines, recursive calls, and large local buffers can cause instability without an obvious compiler warning. Keep interrupts short, use static buffers carefully, and reserve stack space for the deepest interrupt nesting case. Also avoid treating the 4 KB flash as an application buffer; move constants into EEPROM only when nonvolatile storage and write endurance are appropriate.

Keep the crystal or clock source, programming interface, and reset circuitry close to their associated device pins. Route ADC inputs away from PWM outputs, switching nodes, and high-current return paths to reduce conversion errors. For UART-connected boards, provide a stable common ground and use a level shifter when the external host voltage differs from the ATTINY44 supply. Review unused pins and their configured states in the final firmware.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The ATTINY44-20MU is an industrial and commercial microcontroller rather than an AEC-Q100 automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not confirmed in the retrieved sources.

ডেটা যাচাই করা হয়েছে: 2026-11-14 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

attiny44 pinout attiny44 datasheet attiny44 programming attiny44 price attiny44 vs attiny84 attiny44 20ssu attiny44 arduino attiny44 uart ATTINY44-20MU datasheet pdf ATTINY44-20MU pinout ATTINY44-20MU equivalent ATTINY44-20MU replacement ATTINY44-20MU vs ATTINY84-20MU Microchip ATTINY44-20MU

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology ATTINY44-20MU ATTINY44A-MU ATTINY44A-MMH ATTINY84-20MU ATtiny44 AVR 8-bit microcontroller RISC architecture embedded controller semiconductor 20-QFN-EP QFN family surface-mount package exposed pad 4 KB flash memory 256-byte SRAM 256-byte EEPROM 10-bit ADC Universal Serial Interface PWM in-system programming UART Microchip Technology AVR RISC-based CMOS 8-bit microcontroller
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন