Broadcom

BCM53286MIPBG - 28-Port Ethernet Switch | Broadcom

MPN: BCM53286MIPBG ✓ সক্রিয়
676-pin PBGA Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

BCM53286MIPBG সারাংশ

The Broadcom BCM53286MIPBG is a 28-port Ethernet switch integrated circuit packaged in a 676-pin PBGA. It is identified as an interface controller and Ethernet switching device by Broadcom Limited. Its high-ball-count package and 28-port configuration position it for advanced Ethernet systems where substantial integrated connectivity is required. The complete electrical, timing, protocol, thermal, and environmental ratings are identified on the manufacturer datasheet and product page.

An Ethernet switch is a network-semiconductor device that receives Ethernet frames on ingress ports, determines the appropriate forwarding path, and transmits those frames toward connected network endpoints or upstream infrastructure. Within the broader semiconductor hierarchy, this product is an Ethernet interface controller, then a network interface, an integrated circuit, and ultimately a semiconductor. That hierarchy distinguishes it from physical-layer transceivers, which convert signals between copper or optical media and digital logic.

The principal cataloged feature of the BCM53286MIPBG is its 28-port Ethernet switch configuration. A 28-port device can consolidate multiple network-facing connections into one switching platform, reducing the number of separate switching components needed in a multi-port system. The MIPBG ordering code corresponds to the 676-pin PBGA package identified for this exact Broadcom Limited part number. Package dimensions, ball pitch, exposed thermal structures, and the complete ball map require confirmation from the manufacturer documentation before PCB release.

The BCM53286MIPBG belongs to a highly integrated application environment in which switching performance, media support, port configuration, management features, electrical interfaces, and thermal performance must be considered together. The exact supported data rates, media types, PHY arrangement, switching fabric architecture, package dimensions, and operating-temperature range are not stated in the available manufacturer information and must be checked against the official datasheet before schematic or layout approval.

Typical design contexts for a 28-port Ethernet switch include access-network aggregation, enterprise edge equipment, service-provider line-card designs, industrial Ethernet equipment, and other multi-port systems. Product developers should determine whether the device's integrated features match the required copper or optical media, backplane bandwidth, management architecture, environmental class, and regulatory targets. A controller alone does not guarantee compliance of the finished network equipment.

A major engineering consideration is the complexity of a 676-ball PBGA. Escape routing, power and ground-plane distribution, high-speed signal integrity, thermal design, assembly yield, and connector or media-access-device placement all require careful planning. Use the manufacturer land pattern and reference design rather than estimating ball coordinates. Confirm the required external components, firmware configuration method, reset behavior, and initialization sequence before production integration.

This page consolidates the verified identity, cataloged package and port information, sourcing path, and engineering implications of the BCM53286MIPBG. It distinguishes the facts established for the exact ordering code from electrical attributes that still require engineering verification. That separation helps teams evaluate the switch quickly while avoiding unsupported assumptions about protocol support, thermal ratings, or PCB implementation.

এর জন্য ড্রপ-ইন বিকল্প BCM53286MIPBG — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।

বিকল্প অনুরোধ করুন

BCM53286MIPBG সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type Ethernet switch / interface controller
Ethernet Port Count 28 ports
Package Type 676-pin PBGA
Manufacturer Broadcom Limited
Ordering Code BCM53286MIPBG
Device Category Interface controller
মাউন্টিং টাইপ Surface mount

BCM53286MIPBG 676-pin pbga পিন কনফিগারেশন গাইড

BCM53286MIPBG (676-pin pbga প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

BCM53286MIPBG-এর জন্য 676-pin pbga প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি BCM53286MIPBG.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

BCM53286MIPBG এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Access-Network Aggregation, Enterprise Ethernet Aggregation, Industrial Control Networks, Network Interface Equipment, Server and Storage Connectivity, IoT Gateway Platforms.

🌐

Access-Network Aggregation

BCM53286MIPBG fits access-network aggregation platforms that require a consolidated 28-port Ethernet switching function in one device. Placing the Broadcom controller at the center of a line-card design can simplify system organization compared with distributing switching functions across multiple smaller devices. The 676-pin PBGA requires careful escape routing and a validated thermal land pattern, while the supporting PHY or media-access circuitry must be selected from the manufacturer reference design. Before schematic approval, confirm supported media rates, port provisioning, management interfaces, and synchronization requirements against the Broadcom datasheet.

🏭

Enterprise Ethernet Aggregation

The 28-port configuration of BCM53286MIPBG makes it a candidate for enterprise edge and aggregation equipment where many copper Ethernet connections must be consolidated behind a common switching controller. Its value is architectural: one high-integration device can organize a substantial multi-port section of the board instead of dividing that function across numerous packages. Engineering teams should confirm switching throughput, maximum frame handling, management features, and environmental ratings in the manufacturer documentation. PCB planning must also account for the 676 balls, high-speed differential routing, reference power planes, and connector escape constraints.

🏭

Industrial Control Networks

BCM53286MIPBG can be evaluated for industrial Ethernet controllers that need numerous network-facing ports for machine controllers, sensors, supervisory stations, and plant-level data collection. The 28-port Ethernet-switch role provides a clear architectural match, but industrial suitability depends on the device's documented temperature range, diagnostic features, media support, and reliability targets. Use the exact manufacturer package drawing for assembly and maintain adequate copper thermal capacity around the PBGA. Firmware configuration, startup order, reset behavior, and fault handling must be validated before field deployment.

🔧

Network Interface Equipment

BCM53286MIPBG is architecturally suitable for network-interface equipment that requires a high count of Ethernet-facing connections within a compact controller package. Such equipment includes gateway platforms, test systems, and aggregation modules where each port must be routed, managed, and isolated according to the network design. The verified 28-port count supports this use case, while exact speed and port-mode details remain to be confirmed from Broadcom's documentation. Signal-integrity planning should address connector launches, impedance-controlled pairs, return paths, and synchronization between switch traffic and external PHY or magnetics circuitry.

🖥️

Server and Storage Connectivity

BCM53286MIPBG may be considered for server or storage-adjacent networking equipment where 28 Ethernet connections must be brought into a managed switching fabric. The integration can reduce the component count associated with a dense access point, although the part must meet the system's throughput, latency, thermal, and fault-recovery requirements. Because this is a complex 676-pin PBGA, validate power sequencing, ground-plane geometry, and high-speed layer transitions with the manufacturer's reference design. Do not infer server-class availability, redundant-power behavior, or particular media support from the port count alone.

🧩

IoT Gateway Platforms

BCM53286MIPBG can support a gateway architecture in which numerous wired Ethernet endpoints converge on a local switching domain before traffic reaches another network segment. Its 28-port function is attractive for densely connected industrial IoT equipment, but the controller still needs supporting clocking, power, firmware, and external media-interface components. Validate the complete startup sequence and port-isolation requirements before connecting field equipment. The PBGA footprint also demands assembly-process planning, including solder profile, inspection coverage, via-in-pad policy where appropriate, and sufficient board copper for expected heat dissipation.

What is the BCM53286MIPBG?
The BCM53286MIPBG is a Broadcom Limited 28-port Ethernet switch and interface controller packaged in a 676-pin PBGA. Broadcom's product information identifies the device as Ethernet switch silicon for multi-port networking equipment. The exact supported data rates, PHY arrangement, management interfaces, and electrical limits must be confirmed in the manufacturer datasheet before the part is used in a production schematic.
How many Ethernet ports does BCM53286MIPBG have?
The BCM53286MIPBG has 28 Ethernet ports. According to Broadcom's product information, the device is a 28-port Ethernet switch, allowing a single package to consolidate numerous network connections in equipment such as access-network line cards, industrial Ethernet platforms, and enterprise aggregation systems. Verify whether every port is externally accessible and whether PHY or media-device circuitry is required.
What package does BCM53286MIPBG use?
The BCM53286MIPBG uses a 676-pin PBGA package. The exact package dimensions, ball pitch, power and ground assignment, and thermal land pattern are not stated in the available product information. Use the Broadcom package drawing and land pattern for PCB design because a 676-ball footprint must be matched accurately to support power delivery, signal escape routing, assembly yield, and heat dissipation.
Where can I download the BCM53286MIPBG datasheet PDF?
The BCM53286MIPBG datasheet PDF should be obtained from Broadcom Limited through the official product documentation or a linked document on the manufacturer page. The distributor product page at https://www.digikey.com/en/products/detail/broadcom-limited/BCM53286MIPBG/6146452 also provides an access path to documentation. Confirm the document revision against the device ordering code before releasing the design.
Where can I find the BCM53286MIPBG pinout?
The BCM53286MIPBG ball assignment is identified by the 676-pin PBGA package drawing in the Broadcom datasheet or package documentation. A complete numbered pinout cannot be reproduced safely because the available product information does not list individual ball names. Before layout release, map every power, ground, control, configuration, and high-speed signal ball directly from the manufacturer documents.
What are the key specifications of BCM53286MIPBG that engineers should know?
The established core specifications for BCM53286MIPBG are 28 Ethernet switch ports and a 676-pin PBGA package from Broadcom Limited. The part is categorized as an interface controller. Detailed operating voltage, throughput, supported media, maximum frame rate, thermal resistance, and temperature ratings are not stated in the available product information and must be taken from the manufacturer datasheet.
What can replace BCM53286MIPBG?
No verified pin-compatible drop-in replacement for BCM53286MIPBG is established. The searched cross-reference results name BCM53346A0KFSBLG, BCM5358B0KFBG, and BCM5324MKPBG as comparison parts, but their packages and functional coverage are not confirmed as identical to the 676-pin PBGA target. A replacement should be approved only after Broadcom pin, protocol, performance, firmware, and PCB land-pattern comparisons.
Is BCM53286MIPBG the same as BCM53346A0KFSBLG?
The BCM53286MIPBG and BCM53346A0KFSBLG should not be treated as identical solely because a comparison page relates them. The target is a 28-port Ethernet switch in a 676-pin PBGA, while detailed pin compatibility and feature parity for the alternative are not established. The two parts require a full datasheet, land-pattern, media-support, management, and firmware review before substitution.
BCM53286MIPBG vs BCM5358B0KFBG - which is better for a 28-port design?
Choose BCM53286MIPBG when its verified 28-port configuration and manufacturer-documented interfaces satisfy the design; the comparison data does not establish BCM5358B0KFBG as a drop-in alternative. The BCM5358B0KFBG ordering code references a different Broadcom device family, and its exact port count, package, PHY integration, and management features require direct review. PCB reuse must not be assumed.
When should I choose BCM53286MIPBG over a different Broadcom Ethernet switch?
Choose BCM53286MIPBG when the design requires the documented 28-port Ethernet-switch function and can accommodate its 676-pin PBGA implementation. Favor another Broadcom switch only when its documented port count, media support, management interface, power requirements, or thermal characteristics align more closely with the system. The exact choice should be based on the manufacturer data for each device rather than package similarity alone.
Is BCM53286MIPBG suitable for industrial and access-network equipment?
BCM53286MIPBG can be evaluated for industrial and access-network equipment because its verified 28-port Ethernet-switch role matches those multi-connection architectures. Suitability is not yet confirmed by the available temperature rating, media support, EMC target, reliability qualification, or lifecycle details. Confirm those requirements in the Broadcom datasheet and complete system-level qualification before production deployment.
What is the lead time for BCM53286MIPBG?
The current lead time for BCM53286MIPBG should be requested through the Request a Quote form on this page. The distributor result describes immediate shipping availability but does not provide a contractual lead-time value, factory minimum order quantity, or date-certain schedule. Purchasing decisions should use a current quotation that states the exact MPN, quantity, package suffix, and delivery destination.
Is BCM53286MIPBG in stock?
BCM53286MIPBG is shown as available for ordering by a distributor, but live inventory changes and may differ by region and shipment destination. Use the Request a Quote form on this page for current stock confirmation. Quote requests should specify the quantity and whether the full 676-pin PBGA ordering code BCM53286MIPBG is required for the production BOM.
Where can I buy BCM53286MIPBG online?
Use the Request a Quote form on this page to request BCM53286MIPBG from XAIPART. The request should state the required quantity, BCM53286MIPBG ordering code, delivery location, and target schedule. The verified catalog record identifies Broadcom Limited as the manufacturer and confirms the exact MPN, but current commercial terms should be established through the quotation process.
What is the price of BCM53286MIPBG?
Use the Request a Quote form on this page for the current commercial terms for BCM53286MIPBG. Pricing for a 676-pin PBGA switch can vary with order quantity, allocation, date code, warranty, and delivery requirements. The request should identify the exact MPN and quantity so the quotation corresponds to the intended production configuration rather than a generic Ethernet-switch product.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা BCM53286MIPBG — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose BCM53286MIPBG when a design specifically requires Broadcom's documented 28-port Ethernet-switch function and can accommodate its 676-pin PBGA implementation. It is especially relevant to multi-port access, aggregation, industrial, and gateway architectures where consolidating many Ethernet-facing connections is valuable. Before committing, verify supported media and speeds, PHY integration, management functions, power requirements, environmental ratings, and initialization procedures against the manufacturer datasheet. Do not select a different Broadcom switch merely because it is described as a comparable Ethernet controller. For BCM53346A0KFSBLG, BCM5358B0KFBG, or BCM5324MKPBG, require verified package and pin compatibility, equivalent traffic handling, suitable media support, and a confirmed PCB land pattern. If those requirements cannot be demonstrated, treat the candidate as a redesign alternative rather than a drop-in replacement.

ডিজাইন নোট

Use the Broadcom 676-pin PBGA land pattern and ball assignment without substitution. Confirm package dimensions, ball pitch, power and ground balls, thermal-array behavior, and assembly requirements from the manufacturer documents before placing escape traces. Review via geometry and solder-mask conditions with the selected PCB fabricator.

Plan thermal relief around the PBGA according to the manufacturer's power-dissipation and package guidance. Validate worst-case loading, ambient temperature, airflow, copper area, and thermal via arrangement at the system level. The available product information does not establish junction-temperature limits or thermal resistance, so those values must be taken from the datasheet.

Route high-speed Ethernet differential pairs as impedance-controlled connections with continuous reference planes and minimized stubs. Coordinate connector or PHY launches, layer transitions, return paths, and isolation spacing. Because supported data rates and PHY arrangements are not stated, derive all stack-up, via, and compensation guidance from the complete Broadcom reference design.

Do not treat comparison-page candidates such as BCM53346A0KFSBLG, BCM5358B0KFBG, or BCM5324MKPBG as drop-in replacements without a complete pin, package, protocol, and land-pattern audit. The target's 676-pin PBGA makes accidental substitution particularly risky. Obtain manufacturer documentation for any proposed alternative and conduct hardware validation before schematic revision.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The available product information does not establish the requested compliance statuses. Confirm them from Broadcom's current product declaration or material-compliance documentation for the exact ordering code.

ডেটা যাচাই করা হয়েছে: 2026-11-15 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

BCM53286MIPBG BCM53286MIPBG datasheet BCM53286MIPBG datasheet pdf BCM53286MIPBG pinout BCM53286MIPBG footprint BCM53286MIPBG equivalent BCM53286MIPBG replacement BCM53286MIPBG cross reference BCM53286MIPBG price Broadcom BCM53286MIPBG BCM53286MIPBG 28-port switch BCM53286MIPBG 676-pin PBGA

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Broadcom Broadcom Limited BCM53286MIPBG BCM53346A0KFSBLG BCM5358B0KFBG BCM5324MKPBG Ethernet switch interface controller network interface integrated circuit semiconductor 28-port Ethernet 676-pin PBGA PBGA package family surface-mount technology access network industrial Ethernet enterprise aggregation Ethernet port switching fabric signal integrity thermal management RoHS REACH AEC-Q100
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন