BCM53286MIPBG - 28-Port Ethernet Switch | Broadcom
MPN: BCM53286MIPBG ✓ AktifBCM53286MIPBG Genel Bakış
An Ethernet switch is a network-semiconductor device that receives Ethernet frames on ingress ports, determines the appropriate forwarding path, and transmits those frames toward connected network endpoints or upstream infrastructure. Within the broader semiconductor hierarchy, this product is an Ethernet interface controller, then a network interface, an integrated circuit, and ultimately a semiconductor. That hierarchy distinguishes it from physical-layer transceivers, which convert signals between copper or optical media and digital logic.
The principal cataloged feature of the BCM53286MIPBG is its 28-port Ethernet switch configuration. A 28-port device can consolidate multiple network-facing connections into one switching platform, reducing the number of separate switching components needed in a multi-port system. The MIPBG ordering code corresponds to the 676-pin PBGA package identified for this exact Broadcom Limited part number. Package dimensions, ball pitch, exposed thermal structures, and the complete ball map require confirmation from the manufacturer documentation before PCB release.
The BCM53286MIPBG belongs to a highly integrated application environment in which switching performance, media support, port configuration, management features, electrical interfaces, and thermal performance must be considered together. The exact supported data rates, media types, PHY arrangement, switching fabric architecture, package dimensions, and operating-temperature range are not stated in the available manufacturer information and must be checked against the official datasheet before schematic or layout approval.
Typical design contexts for a 28-port Ethernet switch include access-network aggregation, enterprise edge equipment, service-provider line-card designs, industrial Ethernet equipment, and other multi-port systems. Product developers should determine whether the device's integrated features match the required copper or optical media, backplane bandwidth, management architecture, environmental class, and regulatory targets. A controller alone does not guarantee compliance of the finished network equipment.
A major engineering consideration is the complexity of a 676-ball PBGA. Escape routing, power and ground-plane distribution, high-speed signal integrity, thermal design, assembly yield, and connector or media-access-device placement all require careful planning. Use the manufacturer land pattern and reference design rather than estimating ball coordinates. Confirm the required external components, firmware configuration method, reset behavior, and initialization sequence before production integration.
This page consolidates the verified identity, cataloged package and port information, sourcing path, and engineering implications of the BCM53286MIPBG. It distinguishes the facts established for the exact ordering code from electrical attributes that still require engineering verification. That separation helps teams evaluate the switch quickly while avoiding unsupported assumptions about protocol support, thermal ratings, or PCB implementation.
Drop-in alternatifler için BCM53286MIPBG — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinBCM53286MIPBG Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | Ethernet switch / interface controller |
| Ethernet Port Count | 28 ports |
| Package Type | 676-pin PBGA |
| Manufacturer | Broadcom Limited |
| Ordering Code | BCM53286MIPBG |
| Device Category | Interface controller |
| Montaj Türü | Surface mount |
BCM53286MIPBG 676-pin pbga Pin Yapısı Kılavuzu
BCM53286MIPBG (676-pin pbga paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: BCM53286MIPBG.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
BCM53286MIPBG için uygundur 6 uygulamas: Access-Network Aggregation, Enterprise Ethernet Aggregation, Industrial Control Networks, Network Interface Equipment, Server and Storage Connectivity, IoT Gateway Platforms.
Access-Network Aggregation
BCM53286MIPBG fits access-network aggregation platforms that require a consolidated 28-port Ethernet switching function in one device. Placing the Broadcom controller at the center of a line-card design can simplify system organization compared with distributing switching functions across multiple smaller devices. The 676-pin PBGA requires careful escape routing and a validated thermal land pattern, while the supporting PHY or media-access circuitry must be selected from the manufacturer reference design. Before schematic approval, confirm supported media rates, port provisioning, management interfaces, and synchronization requirements against the Broadcom datasheet.
Önerilen
Enterprise Ethernet Aggregation
The 28-port configuration of BCM53286MIPBG makes it a candidate for enterprise edge and aggregation equipment where many copper Ethernet connections must be consolidated behind a common switching controller. Its value is architectural: one high-integration device can organize a substantial multi-port section of the board instead of dividing that function across numerous packages. Engineering teams should confirm switching throughput, maximum frame handling, management features, and environmental ratings in the manufacturer documentation. PCB planning must also account for the 676 balls, high-speed differential routing, reference power planes, and connector escape constraints.
Önerilen
Industrial Control Networks
BCM53286MIPBG can be evaluated for industrial Ethernet controllers that need numerous network-facing ports for machine controllers, sensors, supervisory stations, and plant-level data collection. The 28-port Ethernet-switch role provides a clear architectural match, but industrial suitability depends on the device's documented temperature range, diagnostic features, media support, and reliability targets. Use the exact manufacturer package drawing for assembly and maintain adequate copper thermal capacity around the PBGA. Firmware configuration, startup order, reset behavior, and fault handling must be validated before field deployment.
Önerilen
Network Interface Equipment
BCM53286MIPBG is architecturally suitable for network-interface equipment that requires a high count of Ethernet-facing connections within a compact controller package. Such equipment includes gateway platforms, test systems, and aggregation modules where each port must be routed, managed, and isolated according to the network design. The verified 28-port count supports this use case, while exact speed and port-mode details remain to be confirmed from Broadcom's documentation. Signal-integrity planning should address connector launches, impedance-controlled pairs, return paths, and synchronization between switch traffic and external PHY or magnetics circuitry.
Önerilen
Server and Storage Connectivity
BCM53286MIPBG may be considered for server or storage-adjacent networking equipment where 28 Ethernet connections must be brought into a managed switching fabric. The integration can reduce the component count associated with a dense access point, although the part must meet the system's throughput, latency, thermal, and fault-recovery requirements. Because this is a complex 676-pin PBGA, validate power sequencing, ground-plane geometry, and high-speed layer transitions with the manufacturer's reference design. Do not infer server-class availability, redundant-power behavior, or particular media support from the port count alone.
Önerilen
IoT Gateway Platforms
BCM53286MIPBG can support a gateway architecture in which numerous wired Ethernet endpoints converge on a local switching domain before traffic reaches another network segment. Its 28-port function is attractive for densely connected industrial IoT equipment, but the controller still needs supporting clocking, power, firmware, and external media-interface components. Validate the complete startup sequence and port-isolation requirements before connecting field equipment. The PBGA footprint also demands assembly-process planning, including solder profile, inspection coverage, via-in-pad policy where appropriate, and sufficient board copper for expected heat dissipation.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: BCM53286MIPBG — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Tasarım Notları
Use the Broadcom 676-pin PBGA land pattern and ball assignment without substitution. Confirm package dimensions, ball pitch, power and ground balls, thermal-array behavior, and assembly requirements from the manufacturer documents before placing escape traces. Review via geometry and solder-mask conditions with the selected PCB fabricator.
Plan thermal relief around the PBGA according to the manufacturer's power-dissipation and package guidance. Validate worst-case loading, ambient temperature, airflow, copper area, and thermal via arrangement at the system level. The available product information does not establish junction-temperature limits or thermal resistance, so those values must be taken from the datasheet.
Route high-speed Ethernet differential pairs as impedance-controlled connections with continuous reference planes and minimized stubs. Coordinate connector or PHY launches, layer transitions, return paths, and isolation spacing. Because supported data rates and PHY arrangements are not stated, derive all stack-up, via, and compensation guidance from the complete Broadcom reference design.
Do not treat comparison-page candidates such as BCM53346A0KFSBLG, BCM5358B0KFBG, or BCM5324MKPBG as drop-in replacements without a complete pin, package, protocol, and land-pattern audit. The target's 676-pin PBGA makes accidental substitution particularly risky. Obtain manufacturer documentation for any proposed alternative and conduct hardware validation before schematic revision.
Uyumluluk Bilgisi
The available product information does not establish the requested compliance statuses. Confirm them from Broadcom's current product declaration or material-compliance documentation for the exact ordering code.