BCM5461A1KFBG - Single-Port Gigabit Ethernet PHY | Broadcom
MPN: BCM5461A1KFBG ✗ জীবনকালের সমাপ্তিBCM5461A1KFBG সারাংশ
An Ethernet PHY, or physical-layer transceiver, is the component that converts logical data transferred through a media-access controller into signals suitable for a physical network medium and converts received signals back into digital data. Within the network interface hierarchy, a PHY operates beneath the Ethernet MAC and above the physical medium. The BCM5461A1KFBG therefore serves as the physical-layer element in a copper-Ethernet network interface, while MAC, PHY management, magnetics, and system-level routing are handled elsewhere in the design.
The BCM5461A1KFBG supports all three principal Ethernet rates of 10 Mb/s, 100 Mb/s, and 1 Gb/s. Its single-transceiver configuration makes it appropriate for one-port routers, switches, industrial gateways, and network interface cards. The 100-pin FBGA package supports compact surface-mount layouts, but its fine pitch requires careful PCB layout, ground-plane continuity, and assembly-process control. Broadcom describes the underlying 0.13 μm process as a cost- and power-oriented implementation for Gigabit copper solutions.
As part of Broadcom's 0.13 μm copper-PHY portfolio, the device supports integration with Ethernet magnetics, a MAC, and a host processor. The manufacturer identifies related family members including BCM5404, BCM5414, BCM5421, BCM5421S, BCM5424, BCM5434, BCM5464, and BCM5464S. Selection among those devices should be based on the complete datasheet, including supported rates, electrical characteristics, package drawing, register behavior, and clocking requirements rather than family membership alone.
Typical deployments include industrial Ethernet gateways, embedded routers, access equipment, test instruments, and compact single-port network adapters. Its single-port organization avoids allocating resources for unused PHYs, while the 100-pin FBGA package reduces board area compared with larger leaded implementations. Systems requiring multiple physical Ethernet ports will normally need additional PHY devices and corresponding magnetics or coupling components.
PCB implementation is the principal engineering consideration. Follow the manufacturer's land pattern, ball assignments, via requirements, and recommended stack-up when laying out the 100-pin FBGA. Place decoupling and clock components close to their associated balls, maintain a continuous ground reference under the device, and follow the prescribed assembly and reflow profile. Because the published excerpt does not reproduce the complete ball map, use the manufacturer pin-description table before assigning signals.
This page combines the confirmed device identity, Ethernet rates, process technology, package format, sourcing information, and application analysis with explicit engineering guidance. It also distinguishes directly documented characteristics from parameters that require confirmation in the complete Broadcom datasheet, helping designers plan the PCB and system architecture without assuming unreleased electrical limits.
এর জন্য ড্রপ-ইন বিকল্প BCM5461A1KFBG — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।
বিকল্প অনুরোধ করুনBCM5461A1KFBG সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | Single-port Ethernet transceiver |
| Supported Data Rates | 10 Mb/s, 100 Mb/s, and 1 Gb/s |
| Ethernet Standards | 10/100/1000BASE-T |
| Number of Ports | 1 port |
| Number of Transceivers | 1 transceiver |
| Process Technology | 0.13 μm |
| প্যাকেজ | 100-pin FBGA |
| মাউন্টিং টাইপ | Surface mount |
| Interface Classification | Ethernet interface IC |
| Media Type | Copper Ethernet |
| Family | Broadcom BCM5461 series |
| Related PHY Family | Broadcom 0.13 μm Gigabit copper PHY family |
| RoHS স্ট্যাটাস | RoHS compliant |
BCM5461A1KFBG 100-pin fbga পিন কনফিগারেশন গাইড
BCM5461A1KFBG (100-pin fbga প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি BCM5461A1KFBG.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
BCM5461A1KFBG এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Ethernet Gateway, Compact Network Adapter, Embedded Router, Test and Measurement Equipment, Single-Port Access Terminal, Network Interface Card.
Industrial Ethernet Gateway
The BCM5461A1KFBG fits a compact industrial gateway that must bridge local control traffic to a 10/100/1000 Mb/s copper network. Its single transceiver provides a physical-layer endpoint for an Ethernet MAC, while the three supported data rates permit the link to operate at 10, 100, or 1,000 Mb/s as dictated by the network. The 100-pin FBGA keeps the device compact but requires a controlled fine-pitch layout and assembly process. Engineers should follow the Broadcom application circuit for magnetics, termination, clocking, and supply decoupling rather than treating the PHY as a standalone Ethernet jack interface.
সুপারিশকৃত
Compact Network Adapter
The BCM5461A1KFBG is appropriate for a compact adapter that adds one copper Ethernet connection to an embedded host or controller. Because the device supports 10 Mb/s, 100 Mb/s, and 1 Gb/s, the same physical design can negotiate across legacy and Gigabit network segments. The PHY occupies a 100-pin FBGA and therefore needs a short, impedance-controlled connection to the selected magnetic device or other physical-layer network components. Board-space savings compared with a leaded package are offset by tighter land-pattern and inspection requirements.
সুপারিশকৃত
Embedded Router
An embedded router can use the BCM5461A1KFBG as the copper Ethernet front end for one WAN or LAN port. Supporting 10, 100, and 1,000 Mb/s allows the system to interoperate with existing access equipment while retaining Gigabit capability on newer links. The PHY's single-port architecture conserves board area and component count relative to a multi-port copper solution. Integration quality depends on following the manufacturer's clock, supply, decoupling, magnetics, and return-path guidance, with special care given to the 100-pin FBGA footprint.
সুপারিশকৃত
Test and Measurement Equipment
The BCM5461A1KFBG can support a single copper Ethernet management or data port in test and measurement equipment. The 10/100/1000BASE-T capability accommodates laboratory networks operating at different negotiated rates, while the one-transceiver configuration keeps the design focused on one physical port. Its 0.13 μm copper-PHY implementation reflects Broadcom's cost- and power-oriented approach to Gigabit copper solutions. For sensitive instruments, validate ground partitioning, magnetics selection, isolation strategy, and conducted-noise performance within the complete reference design.
সুপারিশকৃত
Single-Port Access Terminal
The BCM5461A1KFBG is suited to single-port access terminals that connect an embedded system to a copper access network. Because it supports all three common Ethernet rates, it can serve legacy 10 Mb/s installations as well as 100 Mb/s and Gigabit links without changing the physical transceiver selection. The 100-pin FBGA package supports dense terminal hardware, but the layout must preserve the manufacturer's recommended ball pattern, ground connectivity, and component placement. The end product should also verify environmental and regulatory requirements independently of the PHY's functional specification.
সুপারিশকৃত
Network Interface Card
A single-port network interface card can use the BCM5461A1KFBG to implement 10/100/1000BASE-T connectivity. The one-transceiver arrangement aligns with a compact add-in interface and avoids unnecessary PHY channels when only one copper port is required. The 100-pin FBGA reduces package footprint but makes board assembly sensitive to solder volume, coplanarity, via design, and reflow control. Engineers should use the Broadcom land pattern and reference circuitry, and should verify host-interface timing, management firmware, and magnetics compatibility before production.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা BCM5461A1KFBG — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য |
|---|---|
| Package | 100-pin FBGA |
| Brand | Broadcom |
| Supported Data Rates | 10 Mb/s, 100 Mb/s, 1 Gb/s |
| Ethernet Support | 10/100/1000BASE-T |
| Number of Transceivers | 1 transceiver |
| Number of Ports | 1 port |
| Process Technology | 0.13 μm |
| Mounting Type | Surface mount |
| Application | Copper Gigabit Ethernet physical layer |
| Lifecycle Status | Obsolete |
মূল পার্থক্যসমূহ
- Supports legacy and Gigabit rates in one copper PHY (বনামA single-rate 100 Mb/s Ethernet PHY)
- Single-transceiver architecture for focused port designs (বনামA multi-port Ethernet transceiver)
- Fine-pitch surface-mount construction (বনামA leaded Ethernet transceiver package)
- Established Broadcom 0.13 μm copper-PHY implementation (বনামBCM5461SA2KQMG)
ডিজাইন নোট
Use the Broadcom 100-pin FBGA land pattern exactly, including exposed-pad or thermal-via treatment shown in the manufacturer package drawing. Maintain uninterrupted ground reference beneath the device and place input, output, and bypass capacitors close to their designated balls. The 0.13 μm PHY is a fine-pitch component, so trace geometry, pad-to-via transitions, solder mask definitions, and via-in-pad eligibility should be reviewed with the PCB assembly house.
Route the Ethernet differential pairs according to the manufacturer reference layout and the impedance requirements of the selected magnetics or coupling network. Avoid stubs, unnecessary vias, and splits in the return path. Confirm line spacing against the PCB fabricator's current process, and validate the complete PHY-to-magnetics channel with eye and compliance measurements because a correct PHY footprint alone does not guarantee a compliant 1000BASE-T interface.
Follow the manufacturer's power-up sequence and supply-decoupling network without substituting generic capacitor values. Estimated thermal design should begin with the actual input voltage, regulated supply voltages, PHY dissipation, and ambient temperature obtained from the complete datasheet. Do not assign a final junction-temperature limit until those electrical values and the PCB thermal model are known; use the exposed package area and copper planes to minimize thermal resistance.
Do not treat another member of the BCM5461 series as a direct replacement merely because both support Gigabit Ethernet. Compare the exact package, ball map, supply rails, clock interface, register map, management access, magnetics recommendation, and reset behavior. In particular, BCM5461SA2KQMG is a related BCM5461-series part, but the available information does not establish that it shares the BCM5461A1KFBG's 100-pin footprint or is pin-to-pin compatible.
কমপ্লায়েন্স তথ্য
A legacy inventory listing identifies the device as RoHS compliant. No manufacturer confirmation for REACH, AEC-Q100, lead-free status, halogen-free status, or conflict-minerals compliance was present in the supplied information.