Broadcom

BCM5461A1KFBG - Single-Port Gigabit Ethernet PHY | Broadcom

Teilenummer: BCM5461A1KFBG ✗ Abgekündigt
10/100/1000BASE-T Rds(on) 100-pin FBGA Package
MOQ: 1 |

BCM5461A1KFBG Übersicht

Broadcom BCM5461A1KFBG is a single-port Ethernet transceiver with support for 10 Mb/s, 100 Mb/s, and 1 Gb/s data rates, manufactured in a 0.13 μm process and housed in a 100-pin FBGA package. The device belongs to Broadcom's 0.13 μm Gigabit copper PHY family, combining 10/100/1000BASE-T Ethernet interface capability in a surface-mount package designed for compact network equipment.

An Ethernet PHY, or physical-layer transceiver, is the component that converts logical data transferred through a media-access controller into signals suitable for a physical network medium and converts received signals back into digital data. Within the network interface hierarchy, a PHY operates beneath the Ethernet MAC and above the physical medium. The BCM5461A1KFBG therefore serves as the physical-layer element in a copper-Ethernet network interface, while MAC, PHY management, magnetics, and system-level routing are handled elsewhere in the design.

The BCM5461A1KFBG supports all three principal Ethernet rates of 10 Mb/s, 100 Mb/s, and 1 Gb/s. Its single-transceiver configuration makes it appropriate for one-port routers, switches, industrial gateways, and network interface cards. The 100-pin FBGA package supports compact surface-mount layouts, but its fine pitch requires careful PCB layout, ground-plane continuity, and assembly-process control. Broadcom describes the underlying 0.13 μm process as a cost- and power-oriented implementation for Gigabit copper solutions.

As part of Broadcom's 0.13 μm copper-PHY portfolio, the device supports integration with Ethernet magnetics, a MAC, and a host processor. The manufacturer identifies related family members including BCM5404, BCM5414, BCM5421, BCM5421S, BCM5424, BCM5434, BCM5464, and BCM5464S. Selection among those devices should be based on the complete datasheet, including supported rates, electrical characteristics, package drawing, register behavior, and clocking requirements rather than family membership alone.

Typical deployments include industrial Ethernet gateways, embedded routers, access equipment, test instruments, and compact single-port network adapters. Its single-port organization avoids allocating resources for unused PHYs, while the 100-pin FBGA package reduces board area compared with larger leaded implementations. Systems requiring multiple physical Ethernet ports will normally need additional PHY devices and corresponding magnetics or coupling components.

PCB implementation is the principal engineering consideration. Follow the manufacturer's land pattern, ball assignments, via requirements, and recommended stack-up when laying out the 100-pin FBGA. Place decoupling and clock components close to their associated balls, maintain a continuous ground reference under the device, and follow the prescribed assembly and reflow profile. Because the published excerpt does not reproduce the complete ball map, use the manufacturer pin-description table before assigning signals.

This page combines the confirmed device identity, Ethernet rates, process technology, package format, sourcing information, and application analysis with explicit engineering guidance. It also distinguishes directly documented characteristics from parameters that require confirmation in the complete Broadcom datasheet, helping designers plan the PCB and system architecture without assuming unreleased electrical limits.

Drop-in-Alternativen für BCM5461A1KFBG – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

BCM5461A1KFBG Grenzwerte & elektrische Eigenschaften

Product Type Single-port Ethernet transceiver
Supported Data Rates 10 Mb/s, 100 Mb/s, and 1 Gb/s
Ethernet Standards 10/100/1000BASE-T
Number of Ports 1 port
Number of Transceivers 1 transceiver
Process Technology 0.13 μm
Gehäuse 100-pin FBGA
Montageart Surface mount
Interface Classification Ethernet interface IC
Media Type Copper Ethernet
Family Broadcom BCM5461 series
Related PHY Family Broadcom 0.13 μm Gigabit copper PHY family
RoHS-Status RoHS compliant

BCM5461A1KFBG 100-pin fbga Pinbelegungsleitfaden

Pinbelegung für BCM5461A1KFBG (100-pin fbga-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für BCM5461A1KFBG im 100-pin fbga-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für BCM5461A1KFBG.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

BCM5461A1KFBG ist geeignet für 6 Anwendungs: Industrial Ethernet Gateway, Compact Network Adapter, Embedded Router, Test and Measurement Equipment, Single-Port Access Terminal, Network Interface Card.

🏭

Industrial Ethernet Gateway

The BCM5461A1KFBG fits a compact industrial gateway that must bridge local control traffic to a 10/100/1000 Mb/s copper network. Its single transceiver provides a physical-layer endpoint for an Ethernet MAC, while the three supported data rates permit the link to operate at 10, 100, or 1,000 Mb/s as dictated by the network. The 100-pin FBGA keeps the device compact but requires a controlled fine-pitch layout and assembly process. Engineers should follow the Broadcom application circuit for magnetics, termination, clocking, and supply decoupling rather than treating the PHY as a standalone Ethernet jack interface.

🌐

Compact Network Adapter

The BCM5461A1KFBG is appropriate for a compact adapter that adds one copper Ethernet connection to an embedded host or controller. Because the device supports 10 Mb/s, 100 Mb/s, and 1 Gb/s, the same physical design can negotiate across legacy and Gigabit network segments. The PHY occupies a 100-pin FBGA and therefore needs a short, impedance-controlled connection to the selected magnetic device or other physical-layer network components. Board-space savings compared with a leaded package are offset by tighter land-pattern and inspection requirements.

📡

Embedded Router

An embedded router can use the BCM5461A1KFBG as the copper Ethernet front end for one WAN or LAN port. Supporting 10, 100, and 1,000 Mb/s allows the system to interoperate with existing access equipment while retaining Gigabit capability on newer links. The PHY's single-port architecture conserves board area and component count relative to a multi-port copper solution. Integration quality depends on following the manufacturer's clock, supply, decoupling, magnetics, and return-path guidance, with special care given to the 100-pin FBGA footprint.

🔧

Test and Measurement Equipment

The BCM5461A1KFBG can support a single copper Ethernet management or data port in test and measurement equipment. The 10/100/1000BASE-T capability accommodates laboratory networks operating at different negotiated rates, while the one-transceiver configuration keeps the design focused on one physical port. Its 0.13 μm copper-PHY implementation reflects Broadcom's cost- and power-oriented approach to Gigabit copper solutions. For sensitive instruments, validate ground partitioning, magnetics selection, isolation strategy, and conducted-noise performance within the complete reference design.

📱

Single-Port Access Terminal

The BCM5461A1KFBG is suited to single-port access terminals that connect an embedded system to a copper access network. Because it supports all three common Ethernet rates, it can serve legacy 10 Mb/s installations as well as 100 Mb/s and Gigabit links without changing the physical transceiver selection. The 100-pin FBGA package supports dense terminal hardware, but the layout must preserve the manufacturer's recommended ball pattern, ground connectivity, and component placement. The end product should also verify environmental and regulatory requirements independently of the PHY's functional specification.

🖥️

Network Interface Card

A single-port network interface card can use the BCM5461A1KFBG to implement 10/100/1000BASE-T connectivity. The one-transceiver arrangement aligns with a compact add-in interface and avoids unnecessary PHY channels when only one copper port is required. The 100-pin FBGA reduces package footprint but makes board assembly sensitive to solder volume, coplanarity, via design, and reflow control. Engineers should use the Broadcom land pattern and reference circuitry, and should verify host-interface timing, management firmware, and magnetics compatibility before production.

Zusammenfassung der empfohlenen Produkte

BCM5461A1KFBG Broadcom Verwendet in: Industrial Ethernet Gateway, Compact Network Adapter, Embedded Router, Test and Measurement Equipment, Single-Port Access Terminal, Network Interface Card BCM5461SA2KQMG Related BCM5461-series Gigabit Ethernet interface Verwendet in: Industrial Ethernet Gateway, Compact Network Adapter, Embedded Router, Test and Measurement Equipment, Single-Port Access Terminal, Network Interface Card
What is the BCM5461A1KFBG?
The BCM5461A1KFBG is a Broadcom single-port Ethernet transceiver supporting 10 Mb/s, 100 Mb/s, and 1 Gb/s operation over copper Ethernet. According to the Broadcom BCM5461A1KFBG datasheet, it is a 0.13 μm Gigabit copper PHY packaged in a 100-pin FBGA. It is intended for systems that need a compact physical-layer interface between an Ethernet MAC and the external network medium.
What Ethernet data rates does BCM5461A1KFBG support?
The BCM5461A1KFBG supports 10 Mb/s, 100 Mb/s, and 1 Gb/s Ethernet operation. The Broadcom BCM5461A1KFBG datasheet identifies the device as a single-port 10/100/1000BASE-T transceiver, making it suitable for legacy and Gigabit copper links. Its reported one-transceiver configuration means that a separate physical-layer device is required for each additional Ethernet port.
What package does BCM5461A1KFBG use?
The BCM5461A1KFBG uses a 100-pin FBGA package for surface-mount assembly. The package information in the Broadcom BCM5461A1KFBG datasheet confirms 100 pins and the FBGA format. Because the board footprint is fine-pitch, the PCB should follow the manufacturer's recommended land pattern, ball map, via configuration, assembly profile, and continuous-ground requirements.
Where can I download the BCM5461A1KFBG datasheet PDF?
The BCM5461A1KFBG datasheet PDF is available at the linked manufacturer-document copy for this device. It describes the device as a Broadcom 0.13 μm Gigabit copper PHY and places it within the BCM5461 family. Use the complete document for the ball assignment, electrical limits, register map, recommended application circuit, and PCB implementation details before releasing a PCB design.
Where can I find the BCM5461A1KFBG pinout?
The BCM5461A1KFBG pin and ball assignment is defined in the pin-description section of the Broadcom BCM5461A1KFBG datasheet. The device uses a 100-pin FBGA, so the package drawing and ball table must be used together rather than assigning connections from a generic BGA diagram. Request the complete manufacturer datasheet and match every ball number to its prescribed land pattern before fabrication.
Is BCM5461A1KFBG suitable for a Gigabit Ethernet switch port?
The BCM5461A1KFBG is suitable for one 10/100/1000BASE-T copper port because it supports all three rates and uses one transceiver. The Broadcom BCM5461A1KFBG datasheet identifies a single-port Gigabit copper PHY, so a multi-port design would require one PHY per port unless another multiplexing architecture is implemented. Its 100-pin FBGA also requires a fine-pitch assembly and layout process.
BCM5461A1KFBG vs BCM5461SA2KQMG — which is better for a new design?
BCM5461A1KFBG is the safer legacy choice only when an existing design specifically requires its documented 100-pin FBGA footprint and full register compatibility. The BCM5461SA2KQMG is another Broadcom BCM5461-series Gigabit Ethernet interface, but the available comparison does not establish pin-to-pin compatibility. For a new PCB, compare the complete datasheets, package drawings, electrical characteristics, and firmware requirements rather than treating family membership as interchangeability.
When should I choose BCM5461A1KFBG over another Ethernet PHY?
Choose BCM5461A1KFBG when the design already depends on its documented 100-pin FBGA layout, 10/100/1000BASE-T support, and Broadcom BCM5461-family behavior. Its 0.13 μm implementation belongs to the copper-PHY portfolio described by Broadcom. A new design should also consider device lifecycle, controller compatibility, thermal performance, and whether a currently supported PHY offers a better long-term supply path.
Can BCM5461A1KFBG replace another 100-pin Ethernet transceiver?
The BCM5461A1KFBG can replace another device only after its complete ball assignment, electrical limits, clock interface, register map, and magnetics application match the existing PCB. The Broadcom BCM5461A1KFBG datasheet confirms the 100-pin FBGA format and single Gigabit copper PHY function, but a matching package name alone does not prove drop-in compatibility. Review the manufacturer pin and application tables before approving a substitution.
What can replace BCM5461A1KFBG?
A valid replacement for BCM5461A1KFBG must match its 100-pin FBGA land pattern and provide compatible 10/100/1000BASE-T operation, power interfaces, clocking, register access, and signal timing. No qualified drop-in replacement is identified by the available manufacturer-document information. Treat BCM5461SA2KQMG as a related family member to evaluate, not as a confirmed direct replacement, until its package and pin data are verified.
Where can I buy BCM5461A1KFBG online?
Use the Request a Quote form on this page to request BCM5461A1KFBG availability, current lot conditions, and shipment scheduling. The device is identified as obsolete in one inventory listing, so availability may be limited to remaining stock or previously manufactured inventory. The Request a Quote form is the appropriate channel for confirming the exact MPN, package, quantity, and traceability requirements.
What is the lead time for BCM5461A1KFBG?
The current lead time for BCM5461A1KFBG depends on remaining inventory and lot traceability, so request a quote with your required quantity and date. The Broadcom BCM5461A1KFBG datasheet describes the product as an Ethernet transceiver, while marketplace listings indicate legacy or obsolete inventory. Submit the Request a Quote form to obtain a current schedule and minimum-order details.
Is BCM5461A1KFBG currently in stock?
BCM5461A1KFBG availability cannot be treated as uniformly in stock because the device is described as obsolete in at least one inventory listing, while other listings also show stock. Use the Request a Quote form on this page to check the current quantity for your exact MPN and packaging requirements. Include the target quantity, date, and whether inspection or traceability is required in the request.
What are the key specifications of BCM5461A1KFBG that engineers should know?
The key BCM5461A1KFBG specifications are single-port operation, 10 Mb/s, 100 Mb/s, and 1 Gb/s data rates, 10/100/1000BASE-T copper support, 0.13 μm process technology, and a 100-pin FBGA package. The Broadcom BCM5461A1KFBG datasheet also places it in the BCM5461 Gigabit copper PHY family. Supply, temperature, timing, and power details must be taken from the complete datasheet.
Is BCM5461A1KFBG the same as a generic Gigabit Ethernet transceiver?
No. The BCM5461A1KFBG is a specific Broadcom BCM5461-series device with a defined 100-pin FBGA package, one copper transceiver, and 10/100/1000BASE-T rate support. A generic Gigabit Ethernet transceiver may match the headline speed but differ in ballout, power rails, clocks, register interface, magnetic-device interface, and thermal limits. Use the exact manufacturer documentation when creating a cross-reference.

Technische Referenzdaten für BCM5461A1KFBG – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose BCM5461A1KFBG when maintaining an existing design that specifically uses its 100-pin FBGA footprint, Broadcom register interface, and 10/100/1000BASE-T copper PHY behavior. It is particularly relevant for single-port routers, gateways, adapters, and test equipment that must support legacy 10 or 100 Mb/s links as well as Gigabit Ethernet. Do not select it for a new product without checking lifecycle availability and comparing a currently supported PHY. BCM5461SA2KQMG is a related BCM5461-series Gigabit interface worth evaluating, but it is not a confirmed drop-in substitute without package, pin, timing, and register verification. No cross-brand drop-in alternative has been established from the available information. For new designs, prioritize lifecycle status, controller compatibility, thermal performance, magnetics support, long-term procurement, and a complete manufacturer application reference over family-name similarity.

Vergleich mit Alternativen

Parameter Dieses Produkt
Package 100-pin FBGA
Brand Broadcom
Supported Data Rates 10 Mb/s, 100 Mb/s, 1 Gb/s
Ethernet Support 10/100/1000BASE-T
Number of Transceivers 1 transceiver
Number of Ports 1 port
Process Technology 0.13 μm
Mounting Type Surface mount
Application Copper Gigabit Ethernet physical layer
Lifecycle Status Obsolete

Wichtigste Unterscheidungsmerkmale

  • Supports legacy and Gigabit rates in one copper PHY (vs. A single-rate 100 Mb/s Ethernet PHY)
  • Single-transceiver architecture for focused port designs (vs. A multi-port Ethernet transceiver)
  • Fine-pitch surface-mount construction (vs. A leaded Ethernet transceiver package)
  • Established Broadcom 0.13 μm copper-PHY implementation (vs. BCM5461SA2KQMG)

Designhinweise

Use the Broadcom 100-pin FBGA land pattern exactly, including exposed-pad or thermal-via treatment shown in the manufacturer package drawing. Maintain uninterrupted ground reference beneath the device and place input, output, and bypass capacitors close to their designated balls. The 0.13 μm PHY is a fine-pitch component, so trace geometry, pad-to-via transitions, solder mask definitions, and via-in-pad eligibility should be reviewed with the PCB assembly house.

Route the Ethernet differential pairs according to the manufacturer reference layout and the impedance requirements of the selected magnetics or coupling network. Avoid stubs, unnecessary vias, and splits in the return path. Confirm line spacing against the PCB fabricator's current process, and validate the complete PHY-to-magnetics channel with eye and compliance measurements because a correct PHY footprint alone does not guarantee a compliant 1000BASE-T interface.

Follow the manufacturer's power-up sequence and supply-decoupling network without substituting generic capacitor values. Estimated thermal design should begin with the actual input voltage, regulated supply voltages, PHY dissipation, and ambient temperature obtained from the complete datasheet. Do not assign a final junction-temperature limit until those electrical values and the PCB thermal model are known; use the exposed package area and copper planes to minimize thermal resistance.

Do not treat another member of the BCM5461 series as a direct replacement merely because both support Gigabit Ethernet. Compare the exact package, ball map, supply rails, clock interface, register map, management access, magnetics recommendation, and reset behavior. In particular, BCM5461SA2KQMG is a related BCM5461-series part, but the available information does not establish that it shares the BCM5461A1KFBG's 100-pin footprint or is pin-to-pin compatible.

Compliance-Informationen

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

A legacy inventory listing identifies the device as RoHS compliant. No manufacturer confirmation for REACH, AEC-Q100, lead-free status, halogen-free status, or conflict-minerals compliance was present in the supplied information.

Daten verifiziert am: 2026-11-15 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

BCM5461A1KFBG datasheet BCM5461A1KFBG datasheet pdf BCM5461A1KFBG pinout Broadcom BCM5461A1KFBG BCM5461A1KFBG 100 pin FBGA BCM5461A1KFBG equivalent BCM5461A1KFBG replacement BCM5461A1KFBG cross reference BCM5461A1KFBG vs BCM5461SA2KQMG BCM5461A1KFBG footprint BCM5461A1KFBG price BCM5461A1KFBG stock BCM5461A1KFBG application circuit single port Gigabit Ethernet PHY

Verwandte Bauteile & Begriffe

Broadcom BCM5461A1KFBG BCM5461SA2KQMG BCM5404 BCM5414 BCM5421 BCM5421S BCM5424 BCM5434 BCM5464 BCM5464S Ethernet transceiver Ethernet PHY physical-layer transceiver 10/100/1000BASE-T Gigabit Ethernet copper PHY 0.13 μm process 100-pin FBGA BGA package family surface-mount technology network interface controller Ethernet magnetics RoHS
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen