BCM56312A0KFEB - 24-Port Gigabit Ethernet + 2x10G | Broadcom
MPN: BCM56312A0KFEB ✓ সক্রিয়BCM56312A0KFEB সারাংশ
An Ethernet switch IC is a semiconductor that connects multiple network ports while transferring Ethernet frames between attached devices and uplink interfaces. Within the product hierarchy, this device belongs to the Ethernet switching IC, interface controller, and integrated circuit categories. Its 24-port Gigabit Ethernet capability supports numerous 1 GbE connections, while the two 10G ports provide higher-bandwidth paths for trunking, uplinks, or server aggregation.
The principal headline characteristics are 24 Gigabit Ethernet ports, two 10 Gigabit Ethernet ports, and a Broadcom Ethernet controller implementation. The exact package dimensions, pin count, voltage ratings, clocking requirements, transceiver details, and thermal ratings must be established from the manufacturer documentation for the production design. These device-specific values are especially important because Ethernet switch ICs commonly require exact ball assignments, reference-clock routing, power-plane planning, and high-speed differential-pair layout.
At the architecture level, BCM56312A0KFEB is intended to consolidate port aggregation and switching functions into a dedicated network processor. A 1 GbE port carries traffic at 1,000 Mb/s nominal line rate, whereas a 10G port provides ten times that nominal bandwidth. This makes the two 10G interfaces useful for backbone or aggregation roles while the 24 Gigabit Ethernet ports handle endpoint access, server management, or downlink traffic.
Typical deployment locations include Ethernet access platforms, managed network switches, residential gateways, enterprise aggregation systems, and test equipment requiring many simultaneous network connections. The device can also support designs that need a controlled division of traffic between numerous 1 GbE links and higher-speed uplinks. Product-level throughput, forwarding behavior, buffering, and management features should be verified in the Broadcom documentation before final system qualification.
A critical PCB-design step is preserving signal integrity around the high-speed interfaces. Use manufacturer-recommended layer stacking, controlled-impedance routing, short differential connections, continuous reference planes, and defined separation between noisy clock or power circuitry and sensitive data paths. Power delivery should be checked against the exact core and I/O requirements before component selection and decoupling are frozen.
This product page consolidates the confirmed Ethernet port configuration with sourcing guidance, engineering notes, and a structured comparison framework. It also separates verified product facts from design-dependent details, helping engineers move efficiently from part selection to schematic capture, PCB layout, prototype build, and production qualification.
এর জন্য ড্রপ-ইন বিকল্প BCM56312A0KFEB — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।
বিকল্প অনুরোধ করুনBCM56312A0KFEB সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Manufacturer | Broadcom |
| Device Type | Ethernet switch integrated circuit |
| Gigabit Ethernet Port Count | 24 ports |
| 10 Gigabit Ethernet Port Count | 2 ports |
| Total Named Ethernet Ports | 26 ports |
| Gigabit Ethernet Nominal Rate | 1 Gb/s per port |
| 10 Gigabit Ethernet Nominal Rate | 10 Gb/s per port |
| Product Description | 24-port Gigabit Ethernet plus 2x10G |
| Lead-Free Status | Compliant |
| RoHS স্ট্যাটাস | RoHS3 compliant |
BCM56312A0KFEB standard পিন কনফিগারেশন গাইড
BCM56312A0KFEB (standard প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি BCM56312A0KFEB.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
BCM56312A0KFEB এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Managed Enterprise Access Switch, Carrier Ethernet Access Gateway, Residential Gateway and CPE, Network Traffic Aggregation System, Ethernet Port Concentrator, Industrial Network Control Platform.
Managed Enterprise Access Switch
BCM56312A0KFEB fits a managed enterprise access switch that needs 24 Gigabit Ethernet ports for endpoint connections and two 10 Gigabit Ethernet ports for higher-speed uplink or server aggregation. The mixed port arrangement allows one switching platform to consolidate many 1 GbE links without requiring a separate high-speed aggregation device. Before committing the design, engineers should confirm the media interface, forwarding performance, buffering, management firmware, and thermal limits in the Broadcom documentation. The PCB should reserve separate power planes for core and I/O requirements and preserve controlled-impedance routing for the high-speed interfaces.
Carrier Ethernet Access Gateway
The 24 Gigabit Ethernet ports of BCM56312A0KFEB can serve access-facing traffic in a carrier Ethernet gateway, while the two 10 Gigabit Ethernet ports provide paths toward an aggregation or distribution layer. This arrangement supports systems that need more connection density than a conventional endpoint interface controller can deliver. Production qualification should confirm the exact PHY or SerDes configuration, line-card timing, reference-clock source, reset behavior, and environmental requirements. Maintain controlled-impedance routing and continuous return paths, and follow the approved reference design for decoupling and power sequencing.
Residential Gateway and CPE
BCM56312A0KFEB is applicable to a residential gateway or customer-premises equipment platform requiring numerous wired Ethernet connections plus faster uplinks. Its 24 Gigabit Ethernet ports can connect local services and devices, while the two 10 Gigabit Ethernet ports support a high-capacity internal backbone or aggregation path. A design of this type must verify whether the required copper PHY, SerDes, voice, routing, and management functions are supported by the selected device configuration. Plan enclosure heat dissipation and maintain separation between switching circuitry, clocks, and sensitive interfaces.
Network Traffic Aggregation System
BCM56312A0KFEB can serve as the switching element in a traffic-aggregation system that combines 24 lower-speed access links with two 10 Gb/s paths. Such a configuration is relevant to test equipment, appliance controllers, and network-interface aggregation products where a high port count must coexist with faster trunk connections. Engineering review should confirm switching throughput, nonblocking performance, packet-buffer requirements, latency objectives, and supported rate combinations. Use the manufacturer reference layout to place decoupling and clock circuitry, and validate every high-speed layer transition with signal-integrity simulations.
Ethernet Port Concentrator
BCM56312A0KFEB is well matched to an Ethernet port concentrator whose primary requirement is high physical-port density. The 24 Gigabit Ethernet ports provide a broad connection base, and the two 10 Gigabit Ethernet ports can connect the concentrator to a higher-capacity core or storage network. The value of the part depends on matching its exact media interfaces and management architecture to the concentrator product. Confirm lead-free manufacturing requirements, airflow, enclosure temperature, and PCB copper availability, and ensure that power distribution remains stable when all connected ports operate simultaneously.
Industrial Network Control Platform
BCM56312A0KFEB can support an industrial network-control platform that connects sensors, controllers, service equipment, and supervisory systems over Ethernet. The 24 Gigabit Ethernet ports provide practical endpoint density, while the two 10 Gigabit Ethernet ports offer faster collection or backbone paths. Industrial suitability depends on the exact temperature grade, regulatory requirements, clock tolerance, and reliability data in the Broadcom product documentation. The implementation should include robust power conversion, deterministic reset behavior, appropriate isolation strategy, thermal monitoring, and layout separation between network interfaces and external control circuitry.
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা BCM56312A0KFEB — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য |
|---|---|
| Brand | Broadcom |
| Gigabit Ethernet Ports | 24 ports |
| 10 Gigabit Ethernet Ports | 2 ports |
| Total Ethernet Ports | 26 ports |
| Gigabit Ethernet Nominal Rate | 1 Gb/s per port |
| 10 Gigabit Ethernet Nominal Rate | 10 Gb/s per port |
| Device Category | Ethernet switch integrated circuit |
| RoHS Status | RoHS3 compliant |
| Lead-Free Status | Compliant |
মূল পার্থক্যসমূহ
- High mixed-speed Ethernet port density (বনামA similarly ported 24-port Gigabit Ethernet-only switching IC)
- Dedicated two-port aggregation capability (বনামA single-speed 24-port Gigabit Ethernet switch controller)
- Lead-free sourcing status (বনামA non-compliant legacy networking controller)
ডিজাইন নোট
Assign the PCB footprint only from the official Broadcom package drawing for BCM56312A0KFEB. Confirm ball pitch, ball-map orientation, package dimensions, thermal lands, and exposed-pad or via requirements before Gerber release. Place the manufacturer-recommended decoupling capacitors directly at their assigned power balls, preserve uninterrupted power and ground planes, and avoid placing high-speed signal vias over plane splits.
Route reference clocks and high-speed differential interfaces as short, controlled-impedance paths using the approved layer stack. Avoid stubs, unnecessary vias, right-angle transitions, and splits beneath the active pair. Maintain the specified spacing from clocks, switching regulators, magnetics, and other potential aggressors, then perform pre-compliance signal-integrity analysis on every externally exposed high-speed interface.
Validate junction temperature, package thermal resistance, copper area, airflow, and adjacent heat sources under the worst operating traffic and ambient conditions. The 26 named Ethernet ports can create sustained switching activity even though the confirmed data does not state a power rating. Use the Broadcom thermal model and reference layout for dissipation estimates, and add thermal monitoring or airflow where the production enclosure cannot maintain the required temperature margin.
Confirm core and I/O supply magnitudes, tolerances, startup sequencing, current limits, and power-good behavior before designing the power tree. Separate noisy switching supplies from sensitive clock and interface rails where the reference design permits it. Check droop and ripple under maximum port activity, and account for inrush during power cycling and firmware-controlled initialization.
Do not treat similar Broadcom Ethernet switch parts as drop-in equivalents without comparing the official pin, electrical, clock, media-interface, and management tables. A port-count match does not guarantee PHY compatibility or software support. Before an engineering change order, validate reset polarity, boot mode, reference-clock magnitude, firmware image, thermal grade, and every affected board net.
কমপ্লায়েন্স তথ্য
The product listing identifies BCM56312A0KFEB as RoHS3 compliant and lead-free. REACH, halogen-free, conflict-minerals, and automotive-qualification status require confirmation from Broadcom.