Broadcom

BCM56312A0KFEB - 24-Port Gigabit Ethernet + 2x10G | Broadcom

N.º de pieza: BCM56312A0KFEB ✓ Activo
MOQ: 1 |

BCM56312A0KFEB Descripción general

Broadcom BCM56312A0KFEB is an Ethernet switching integrated circuit configured for 24 Gigabit Ethernet ports and two 10 Gigabit Ethernet ports. This combination gives equipment designers access to high-speed network aggregation in one dedicated silicon solution, making the device relevant to access gateways, enterprise switching equipment, and carrier-grade Ethernet systems. The component is manufactured by Broadcom and is identified by the exact ordering code BCM56312A0KFEB.

An Ethernet switch IC is a semiconductor that connects multiple network ports while transferring Ethernet frames between attached devices and uplink interfaces. Within the product hierarchy, this device belongs to the Ethernet switching IC, interface controller, and integrated circuit categories. Its 24-port Gigabit Ethernet capability supports numerous 1 GbE connections, while the two 10G ports provide higher-bandwidth paths for trunking, uplinks, or server aggregation.

The principal headline characteristics are 24 Gigabit Ethernet ports, two 10 Gigabit Ethernet ports, and a Broadcom Ethernet controller implementation. The exact package dimensions, pin count, voltage ratings, clocking requirements, transceiver details, and thermal ratings must be established from the manufacturer documentation for the production design. These device-specific values are especially important because Ethernet switch ICs commonly require exact ball assignments, reference-clock routing, power-plane planning, and high-speed differential-pair layout.

At the architecture level, BCM56312A0KFEB is intended to consolidate port aggregation and switching functions into a dedicated network processor. A 1 GbE port carries traffic at 1,000 Mb/s nominal line rate, whereas a 10G port provides ten times that nominal bandwidth. This makes the two 10G interfaces useful for backbone or aggregation roles while the 24 Gigabit Ethernet ports handle endpoint access, server management, or downlink traffic.

Typical deployment locations include Ethernet access platforms, managed network switches, residential gateways, enterprise aggregation systems, and test equipment requiring many simultaneous network connections. The device can also support designs that need a controlled division of traffic between numerous 1 GbE links and higher-speed uplinks. Product-level throughput, forwarding behavior, buffering, and management features should be verified in the Broadcom documentation before final system qualification.

A critical PCB-design step is preserving signal integrity around the high-speed interfaces. Use manufacturer-recommended layer stacking, controlled-impedance routing, short differential connections, continuous reference planes, and defined separation between noisy clock or power circuitry and sensitive data paths. Power delivery should be checked against the exact core and I/O requirements before component selection and decoupling are frozen.

This product page consolidates the confirmed Ethernet port configuration with sourcing guidance, engineering notes, and a structured comparison framework. It also separates verified product facts from design-dependent details, helping engineers move efficiently from part selection to schematic capture, PCB layout, prototype build, and production qualification.

Alternativas directas para BCM56312A0KFEB — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

BCM56312A0KFEB Valores máximos y características eléctricas

Manufacturer Broadcom
Device Type Ethernet switch integrated circuit
Gigabit Ethernet Port Count 24 ports
10 Gigabit Ethernet Port Count 2 ports
Total Named Ethernet Ports 26 ports
Gigabit Ethernet Nominal Rate 1 Gb/s per port
10 Gigabit Ethernet Nominal Rate 10 Gb/s per port
Product Description 24-port Gigabit Ethernet plus 2x10G
Lead-Free Status Compliant
Estado RoHS RoHS3 compliant

Guía de configuración de pines de BCM56312A0KFEB standard

Configuración de pines para BCM56312A0KFEB (encapsulado standard). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado standard para BCM56312A0KFEB

No hay datos detallados de patillaje disponibles para BCM56312A0KFEB.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

BCM56312A0KFEB es adecuado para 6 aplicacións: Managed Enterprise Access Switch, Carrier Ethernet Access Gateway, Residential Gateway and CPE, Network Traffic Aggregation System, Ethernet Port Concentrator, Industrial Network Control Platform.

🌐

Managed Enterprise Access Switch

BCM56312A0KFEB fits a managed enterprise access switch that needs 24 Gigabit Ethernet ports for endpoint connections and two 10 Gigabit Ethernet ports for higher-speed uplink or server aggregation. The mixed port arrangement allows one switching platform to consolidate many 1 GbE links without requiring a separate high-speed aggregation device. Before committing the design, engineers should confirm the media interface, forwarding performance, buffering, management firmware, and thermal limits in the Broadcom documentation. The PCB should reserve separate power planes for core and I/O requirements and preserve controlled-impedance routing for the high-speed interfaces.

🏭

Carrier Ethernet Access Gateway

The 24 Gigabit Ethernet ports of BCM56312A0KFEB can serve access-facing traffic in a carrier Ethernet gateway, while the two 10 Gigabit Ethernet ports provide paths toward an aggregation or distribution layer. This arrangement supports systems that need more connection density than a conventional endpoint interface controller can deliver. Production qualification should confirm the exact PHY or SerDes configuration, line-card timing, reference-clock source, reset behavior, and environmental requirements. Maintain controlled-impedance routing and continuous return paths, and follow the approved reference design for decoupling and power sequencing.

📱

Residential Gateway and CPE

BCM56312A0KFEB is applicable to a residential gateway or customer-premises equipment platform requiring numerous wired Ethernet connections plus faster uplinks. Its 24 Gigabit Ethernet ports can connect local services and devices, while the two 10 Gigabit Ethernet ports support a high-capacity internal backbone or aggregation path. A design of this type must verify whether the required copper PHY, SerDes, voice, routing, and management functions are supported by the selected device configuration. Plan enclosure heat dissipation and maintain separation between switching circuitry, clocks, and sensitive interfaces.

🖥️

Network Traffic Aggregation System

BCM56312A0KFEB can serve as the switching element in a traffic-aggregation system that combines 24 lower-speed access links with two 10 Gb/s paths. Such a configuration is relevant to test equipment, appliance controllers, and network-interface aggregation products where a high port count must coexist with faster trunk connections. Engineering review should confirm switching throughput, nonblocking performance, packet-buffer requirements, latency objectives, and supported rate combinations. Use the manufacturer reference layout to place decoupling and clock circuitry, and validate every high-speed layer transition with signal-integrity simulations.

🔧

Ethernet Port Concentrator

BCM56312A0KFEB is well matched to an Ethernet port concentrator whose primary requirement is high physical-port density. The 24 Gigabit Ethernet ports provide a broad connection base, and the two 10 Gigabit Ethernet ports can connect the concentrator to a higher-capacity core or storage network. The value of the part depends on matching its exact media interfaces and management architecture to the concentrator product. Confirm lead-free manufacturing requirements, airflow, enclosure temperature, and PCB copper availability, and ensure that power distribution remains stable when all connected ports operate simultaneously.

🏭

Industrial Network Control Platform

BCM56312A0KFEB can support an industrial network-control platform that connects sensors, controllers, service equipment, and supervisory systems over Ethernet. The 24 Gigabit Ethernet ports provide practical endpoint density, while the two 10 Gigabit Ethernet ports offer faster collection or backbone paths. Industrial suitability depends on the exact temperature grade, regulatory requirements, clock tolerance, and reliability data in the Broadcom product documentation. The implementation should include robust power conversion, deterministic reset behavior, appropriate isolation strategy, thermal monitoring, and layout separation between network interfaces and external control circuitry.

What is the BCM56312A0KFEB?
The BCM56312A0KFEB is a Broadcom Ethernet switch integrated circuit with 24 Gigabit Ethernet ports and two 10 Gigabit Ethernet ports. According to Broadcom's BCM56312 product description, it is a dedicated networking semiconductor intended for systems that require many 1 GbE connections plus higher-speed aggregation links. The 26 named ports combine 24 GbE connections with two 10G interfaces in one switching device.
How many Ethernet ports does the BCM56312A0KFEB provide?
The BCM56312A0KFEB provides 24 Gigabit Ethernet ports and two 10 Gigabit Ethernet ports, for 26 named Ethernet interfaces in total. According to Broadcom's product description, each Gigabit Ethernet port operates at a nominal 1 Gb/s line rate, while each 10 Gigabit Ethernet port provides a nominal 10 Gb/s path. The exact physical media implementation should be confirmed in the manufacturer documentation.
Where can I download the BCM56312A0KFEB datasheet?
Use the Broadcom manufacturer documentation or the linked product page to obtain the BCM56312A0KFEB datasheet and package information. The confirmed product page identifies the part as a 24-port Gigabit Ethernet plus 2x10G Ethernet switch IC. Before schematic release, verify the official electrical characteristics, pin assignment, reference-clock requirements, power sequencing, and exposed-pad or thermal-land requirements.
Where can I find the BCM56312A0KFEB pinout?
The BCM56312A0KFEB pin assignment must be taken from the Broadcom package drawing and pin-description table because the production footprint cannot be finalized from a port-count summary alone. Use that table to assign power, ground, reference-clock, management, reset, and high-speed I/O balls. Do not infer a pinout from a distributor category label or create a footprint before the official package drawing has been checked.
What is the difference between the 1GbE and 10G ports on the BCM56312A0KFEB?
The BCM56312A0KFEB mixes two nominal link rates: 24 ports at 1 Gb/s and two ports at 10 Gb/s. According to Broadcom's product description, the two 10G interfaces provide ten times the nominal bandwidth of each Gigabit Ethernet port. They can therefore be considered for uplink or aggregation duties, subject to the switching architecture, media interface, and system traffic requirements documented by the manufacturer.
Is the BCM56312A0KFEB suitable for managed Ethernet switches?
The BCM56312A0KFEB is suitable for switch platforms requiring 24 Gigabit Ethernet access ports and two 10 Gigabit Ethernet aggregation ports. Its dedicated Ethernet-switch implementation makes it more appropriate than a general-purpose interface controller for high-port-count network equipment. Final qualification should confirm forwarding capacity, packet-buffer behavior, management features, clocking, and the exact copper or SerDes interface required by the target design.
Can BCM56312A0KFEB be used in a network access gateway?
The BCM56312A0KFEB can fit an Ethernet access gateway that must combine numerous subscriber or endpoint-facing 1 GbE links with two faster aggregation paths. The confirmed configuration provides 24 Gigabit Ethernet ports and two 10 Gigabit Ethernet ports. A production design must still verify environmental ratings, software support, boot requirements, PHY integration, isolation, and the complete Broadcom interface specification.
What is the best drop-in replacement for BCM56312A0KFEB?
No confirmed drop-in replacement for BCM56312A0KFEB is established by the available cross-reference results. A valid replacement must match the exact package, ball pattern, supply rails, clocking, port media interfaces, management requirements, and critical performance parameters. Do not substitute a related Broadcom Ethernet switch merely because it has a similar port count; request the manufacturer cross-reference and compare the official pin and electrical tables before approving a replacement.
What can replace BCM56312A0KFEB?
A BCM56312A0KFEB replacement should be selected only after confirming exact physical and functional compatibility. The confirmed target is a 24-port Gigabit Ethernet plus 2x10G switching IC, but package, power, clock, media, management, and throughput requirements are not established by the listing summary. The safest process is to request an authorized cross-reference, compare every signal and power rail, and validate the candidate in the target hardware.
BCM56312A0KFEB vs a similarly ported Ethernet switch IC: which is better?
The BCM56312A0KFEB is preferable when the design specifically requires the confirmed Broadcom 24-port Gigabit Ethernet plus 2x10G configuration and its supported software and interfaces. A similarly ported competitor may offer a different PHY arrangement, clock scheme, management architecture, or package. Choose the alternative only after checking pin compatibility, throughput, thermal performance, software availability, and lifecycle requirements against the same technical specification.
When should I choose BCM56312A0KFEB over another Ethernet switch controller?
Choose BCM56312A0KFEB when the design specifically needs a Broadcom switching platform with 24 Gigabit Ethernet ports and two 10 Gigabit Ethernet ports and its associated firmware or ecosystem is approved. Retain another controller when it offers a required PHY combination, lower power, smaller package, better thermal margin, lower latency, or guaranteed availability. The selection must be based on complete interface and lifecycle requirements rather than port count alone.
Is the BCM56312A0KFEB RoHS compliant?
The BCM56312A0KFEB is identified as RoHS3 compliant and lead-free in its product listing. According to the Broadcom product information associated with the part, its lead status is RoHS3 compliant. Confirm the exact declaration for the ordered MPN, including any halogen, conflict-minerals, or automotive qualification requirements, before releasing the component into a controlled production BOM.
What PCB layout practices are important for BCM56312A0KFEB?
Use the manufacturer-recommended layer stack and exact ball assignments when laying out BCM56312A0KFEB. Keep power and ground planes continuous, place decoupling at the specified pins, route clocks as short controlled-impedance paths, and preserve controlled-impedance differential routing for high-speed interfaces. Isolate noisy sources from sensitive pairs and follow the reference design for return paths, vias, and thermal-land connections.
How should engineers compare BCM56312A0KFEB replacement candidates?
Compare BCM56312A0KFEB candidates against the official target documentation, not merely distributor descriptions. Check package dimensions, ball map, supply voltages, current, clocking, reset, management interfaces, each PHY or SerDes lane, supported Ethernet rates, buffering, thermal limits, software support, and lifecycle status. A candidate is drop-in only when the footprint and pin functions match and its performance remains within the original design requirements.
Where can I buy BCM56312A0KFEB and request a quote?
Use the Request a Quote form on this page to request BCM56312A0KFEB pricing, stock confirmation, lead time, and minimum order quantity. The form keeps the inquiry connected to the exact Broadcom MPN BCM56312A0KFEB. For production planning, request the current lifecycle and delivery status because availability for complex networking semiconductors can change independently of a product listing.
What is the lead time for BCM56312A0KFEB?
The current lead time for BCM56312A0KFEB should be confirmed through the Request a Quote form on this page. Lead time depends on supplier inventory, factory scheduling, allocated production, package configuration, and the number of units required. Submit the exact MPN, target quantity, delivery location, and required date so the commercial response reflects the production commitment rather than a generic catalog estimate.
What are the key specifications of BCM56312A0KFEB that engineers should know?
The confirmed key specifications are 24 Gigabit Ethernet ports, two 10 Gigabit Ethernet ports, and a 26-port total Ethernet-switch configuration. The Broadcom product description identifies the device as a 24-port Gigabit Ethernet plus 2x10G switching IC. Package dimensions, voltage rails, pin count, reference clock, throughput, thermal ratings, and environmental limits require confirmation from the official Broadcom documentation before schematic and layout release.

Datos de referencia de ingeniería para BCM56312A0KFEB — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose BCM56312A0KFEB when the system requires a dedicated Broadcom Ethernet switching platform with 24 Gigabit Ethernet ports and two 10 Gigabit Ethernet ports, particularly for managed access switches, gateways, traffic aggregators, and network appliances. Its mixed-speed configuration allows many endpoint connections to share the board with higher-capacity uplink paths. Review another controller when the design needs a different PHY arrangement, smaller package, lower power, different management software, or a supplier-supported lifecycle advantage. A similar port count is not enough for a substitute decision: the package, ball map, power rails, clocking, media interfaces, management requirements, and thermal envelope must match the target platform. Before approving BCM56312A0KFEB for production, verify the complete Broadcom electrical and package documentation, reference design, firmware support, environmental grade, and assembly requirements. Because no verified pin-compatible alternative is established, treat any proposed replacement as a new engineering comparison rather than an automatic drop-in change.

Comparación con alternativas

Parámetro Este producto
Brand Broadcom
Gigabit Ethernet Ports 24 ports
10 Gigabit Ethernet Ports 2 ports
Total Ethernet Ports 26 ports
Gigabit Ethernet Nominal Rate 1 Gb/s per port
10 Gigabit Ethernet Nominal Rate 10 Gb/s per port
Device Category Ethernet switch integrated circuit
RoHS Status RoHS3 compliant
Lead-Free Status Compliant

Diferenciadores clave

  • High mixed-speed Ethernet port density (frente a A similarly ported 24-port Gigabit Ethernet-only switching IC)
  • Dedicated two-port aggregation capability (frente a A single-speed 24-port Gigabit Ethernet switch controller)
  • Lead-free sourcing status (frente a A non-compliant legacy networking controller)

Notas de diseño

Assign the PCB footprint only from the official Broadcom package drawing for BCM56312A0KFEB. Confirm ball pitch, ball-map orientation, package dimensions, thermal lands, and exposed-pad or via requirements before Gerber release. Place the manufacturer-recommended decoupling capacitors directly at their assigned power balls, preserve uninterrupted power and ground planes, and avoid placing high-speed signal vias over plane splits.

Route reference clocks and high-speed differential interfaces as short, controlled-impedance paths using the approved layer stack. Avoid stubs, unnecessary vias, right-angle transitions, and splits beneath the active pair. Maintain the specified spacing from clocks, switching regulators, magnetics, and other potential aggressors, then perform pre-compliance signal-integrity analysis on every externally exposed high-speed interface.

Validate junction temperature, package thermal resistance, copper area, airflow, and adjacent heat sources under the worst operating traffic and ambient conditions. The 26 named Ethernet ports can create sustained switching activity even though the confirmed data does not state a power rating. Use the Broadcom thermal model and reference layout for dissipation estimates, and add thermal monitoring or airflow where the production enclosure cannot maintain the required temperature margin.

Confirm core and I/O supply magnitudes, tolerances, startup sequencing, current limits, and power-good behavior before designing the power tree. Separate noisy switching supplies from sensitive clock and interface rails where the reference design permits it. Check droop and ripple under maximum port activity, and account for inrush during power cycling and firmware-controlled initialization.

Do not treat similar Broadcom Ethernet switch parts as drop-in equivalents without comparing the official pin, electrical, clock, media-interface, and management tables. A port-count match does not guarantee PHY compatibility or software support. Before an engineering change order, validate reset polarity, boot mode, reference-clock magnitude, firmware image, thermal grade, and every affected board net.

Información de cumplimiento

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Yes
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The product listing identifies BCM56312A0KFEB as RoHS3 compliant and lead-free. REACH, halogen-free, conflict-minerals, and automotive-qualification status require confirmation from Broadcom.

Datos verificados el: 2026-11-20 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

BCM56312A0KFEB datasheet BCM56312A0KFEB specifications BCM56312A0KFEB pinout BCM56312A0KFEB package BCM56312A0KFEB equivalent BCM56312A0KFEB replacement BCM56312A0KFEB cross reference Broadcom BCM56312A0KFEB BCM56312A0KFEB price BCM56312A0KFEB stock 24 port Gigabit Ethernet 2x10G switch IC BCM56312A0KFEB managed Ethernet switch BCM56312A0KFEB access gateway BCM56312A0KFEB schematic

Componentes & términos relacionados

Broadcom BCM56312A0KFEB BCM56312 Ethernet switch integrated circuit Ethernet controller network interface controller integrated circuit semiconductor Gigabit Ethernet 10 Gigabit Ethernet 1 Gb/s Ethernet 10 Gb/s Ethernet 24-port Gigabit Ethernet 2x10G Ethernet managed access switch carrier Ethernet gateway traffic aggregation network switch customer premises equipment RoHS3 lead-free controlled-impedance routing reference clock power sequencing Ethernet PCB layout
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ