Silicon Labs

C8051F800-GM - 25MHz Mixed-Signal MCU | Silicon Labs

MPN: C8051F800-GM ✓ সক্রিয়
1.8 V to 3.6 V Vdss 20-QFN, 4 x 4 mm Package 25 MHz Speed 16 kB (16K x 8) Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

C8051F800-GM সারাংশ

The Silicon Labs C8051F800-GM is a mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 16 kB of Flash memory, 0.5 kB of RAM, and a 20-QFN 4 x 4 mm surface-mount package. Its headline specifications include a 1.8 V to 3.6 V supply range, a 10-bit 16-channel ADC capable of 500 ksps conversion, and 17 general-purpose I/O pins.

A mixed-signal MCU combines a digital microcontroller core with analog measurement or output circuitry on one integrated device. The C8051F800-GM belongs to the hierarchy of 8-bit MCU, embedded microcontroller, mixed-signal MCU, and semiconductor. Integrating the ADC, DAC, comparator, timers, communication interfaces, and Flash memory reduces component count in compact embedded systems while keeping analog control and digital processing in one package.

Key features include 16 kB of programmable Flash, 512 bytes of RAM, a 10-bit ADC with 16 channels and 500 ksps throughput, an on-chip DAC, one comparator, an integrated temperature sensor, and three 16-bit timers. The 17 I/O pins provide flexible connections for sensors, displays, actuators, and serial peripherals. The 1.8 V to 3.6 V operating range supports low-voltage embedded equipment.

The device is positioned as a compact stand-alone system-on-chip for designs requiring both digital logic and analog signal acquisition. Its 25 MHz processing rate supports event-driven control, data acquisition, capacitive-touch processing, and communication-oriented firmware. Multiple timers provide independent timing for sampling, pulse generation, debouncing, or motor and display control, while the ADC allows the MCU to process measured signals without a separate converter.

Typical applications include portable medical equipment, industrial sensing, capacitive-touch interfaces, battery-powered instruments, environmental monitoring, compact control panels, and connected sensor nodes. The manufacturer identifies the C8051F800-GM as suitable for portable medical equipment, while its analog peripherals support measurement-intensive products that need a small PCB area and low component count.

Designers should verify the exposed-pad connection, decoupling requirements, clock configuration, analog-reference arrangement, and programming interface against the manufacturer datasheet before layout release. Because this is a mixed-signal device, separating sensitive analog inputs from switching nodes and providing a clean reference implementation are as important as routing digital signals.

This page combines manufacturer specifications, application guidance, package information, and carefully qualified replacement information to support faster MCU selection. It also distinguishes direct hardware substitutions from related devices that require different packages, firmware, or peripheral configurations.

এর জন্য ড্রপ-ইন বিকল্প C8051F800-GM — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

C8051F800-GU

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 20-QFN (4x4 mm)
Same C8051F800 family, 25 MHz core, and 20-QFN footprint; ordering suffix and temperature or packing details require confirmation

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

C8051F800-GM সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Microcontroller Type Mixed-signal 8-bit MCU
Processor Core 8051, 8-bit
সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি 25 MHz
Flash Memory 16 kB (16K x 8)
RAM 0.5 kB (512 x 8)
Supply Voltage Range 1.8 V to 3.6 V
ADC Resolution 10 bit
ADC Channel Count 16 channels
ADC Sampling Rate 500 ksps
DAC On-chip DAC
Comparator Count 1
On-Chip Temperature Sensor Present
Timer Count 3 x 16-bit timers
General-Purpose I/O Pins 17 pins
অপারেটিং তাপমাত্রার পরিসর -40°C to +85°C
প্যাকেজ 20-QFN, 4 x 4 mm
মাউন্টিং টাইপ Surface mount
RoHS স্ট্যাটাস Compliant

C8051F800-GM 20-qfn, 4 x 4 mm পিন কনফিগারেশন গাইড

C8051F800-GM (20-qfn, 4 x 4 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

C8051F800-GM-এর জন্য 20-qfn, 4 x 4 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি C8051F800-GM.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

C8051F800-GM এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Portable Medical Equipment, Industrial Sensing and Control, Capacitive-Touch User Interface, Battery-Powered Instrument, Environmental Monitoring Node, Compact Control Panel.

💊

Portable Medical Equipment

The C8051F800-GM fits portable medical equipment that combines sensor acquisition with local control in a compact enclosure. Its 10-bit ADC provides 16 channels at up to 500 ksps, allowing multiple low-frequency biomedical inputs to be sampled without a separate converter. The integrated DAC, comparator, and temperature sensor also reduce board area, while 16 kB of Flash and 0.5 kB of RAM support control firmware and calibration data. In a low-voltage instrument, the 1.8 V to 3.6 V supply range simplifies rail planning. The design must still apply the required medical, safety, EMC, and risk-control processes at the complete-system level.

🏭

Industrial Sensing and Control

The C8051F800-GM is suited to compact industrial sensing modules that must acquire several analog channels and execute local control logic. Its 16-channel 10-bit ADC, 500 ksps conversion capability, three 16-bit timers, and 17 I/O pins support sensor conditioning, threshold monitoring, actuator timing, and periodic sampling. The 25 MHz 8051 core provides enough responsiveness for event-driven control, while the 4 x 4 mm QFN-20 package supports dense controller boards. A robust implementation should provide clean analog grounding, local reference decoupling, surge protection at external connectors, and defined recovery behavior for sensor or communication faults.

🧩

Capacitive-Touch User Interface

The C8051F800-GM supports capacitive-touch interface designs where limited board space and local signal processing are important. Its mixed-signal resources allow touch-capacitance measurement to coexist with button handling, indicator control, and communications in one 4 x 4 mm QFN-20 package. The 25 MHz core can process timing-sensitive touch events, while the three 16-bit timers support periodic scanning and debounce functions. Designers should follow the manufacturer's touch-measurement recommendations, preserve clean sensor routing, calibrate electrode sensitivity, and validate operation across humidity, temperature, and grounding variations.

⚡

Battery-Powered Instrument

The C8051F800-GM fits battery-powered instruments where low-voltage operation and analog integration can reduce component count. Its 1.8 V to 3.6 V operating range accommodates 1.8 V and 2.5 V system rails, while the 10-bit ADC, DAC, comparator, and temperature sensor support measurement, excitation, and calibration functions. Sixteen kilobytes of Flash stores firmware and configuration data, and 0.5 kB of RAM is adequate for compact control tasks. Power-budget calculations should use the manufacturer's active and inactive current tables, enable unused peripherals, and place the device into the appropriate low-power mode whenever the measurement cycle permits.

🌐

Environmental Monitoring Node

The C8051F800-GM is appropriate for environmental monitoring nodes that combine analog sensors with periodic digital reporting. Sixteen ADC channels can serve temperature, humidity, gas, or level-sensing inputs, while the comparator and integrated temperature sensor support threshold and thermal monitoring. Three 16-bit timers enable regular sampling intervals, sensor warm-up timing, and communication scheduling. The 4 x 4 mm QFN-20 package helps reduce node size, and the 1.8 V to 3.6 V range supports low-energy operation. Production designs should include input protection, low-noise reference routing, moisture-resistant assembly practices, and firmware checks that detect implausible sensor readings.

🔧

Compact Control Panel

The C8051F800-GM can serve as the controller in a compact operator panel containing sensors, indicators, and a communication link. Its 17 I/O pins support buttons, status LEDs, and discrete control signals, while the ADC handles analog controls or diagnostics and the DAC can generate an analog setpoint or test signal. The 25 MHz processor permits responsive interaction, and the small QFN-20 package leaves space for connectors and display circuitry. Because a human-interface panel is sensitive to ESD and ground noise, use protected connector routes, separated analog and digital return paths, and defined firmware handling for stuck or shorted controls.

What are the key specifications of C8051F800-GM that engineers should know?
The C8051F800-GM is a 25 MHz mixed-signal 8-bit MCU with 16 kB of Flash, 0.5 kB of RAM, a 10-bit 16-channel ADC, and a 20-QFN package. According to the Silicon Labs manufacturer product page, it also includes an on-chip DAC, one comparator, an integrated temperature sensor, three 16-bit timers, and 17 general-purpose I/O pins. Its 1.8 V to 3.6 V supply range makes it suitable for compact, low-voltage embedded systems requiring substantial analog integration in a 4 x 4 mm footprint.
What is the operating voltage of C8051F800-GM?
The C8051F800-GM operates from 1.8 V to 3.6 V. According to the Silicon Labs manufacturer product page and the component specification published by Microchip USA, this range applies to the device's VCC or VDD supply. Designers should design the power rail and decoupling network for the worst-case voltage in this interval, while ensuring peripheral inputs, communications, and programming signals remain within their specified limits.
Where can I download the C8051F800-GM datasheet PDF?
The C8051F800-GM datasheet and product resources are available from the Silicon Labs device page linked on this page. According to Silicon Labs, the C8051F800 belongs to the Mixed Signal ISP Flash MCU Family, and the associated documentation covers the C8051F80x and related device families. Use the manufacturer document navigation for the current datasheet, errata, user guide, and development-kit documentation rather than relying on an unofficial mirror.
Where can I find the C8051F800-GM pinout and QFN-20 footprint?
The C8051F800-GM uses a 20-QFN 4 x 4 mm surface-mount package, and its pin assignments and exposed-pad requirements must be taken from the manufacturer datasheet's pin-description and package drawings. According to the Silicon Labs C8051F800 development-kit user guide, the target board carries a pre-soldered C8051F800-GM in a QFN20 package. Use that documentation together with the datasheet to assign PCB tracks, test points, and the exposed-pad connection.
What can replace C8051F800-GM?
The closest qualified same-footprint replacement identified for the C8051F800-GM is the C8051F800-GU, provided its package drawing and pin description match the installed QFN-20 footprint. The C8051F800-GM is a 25 MHz, 16 kB Flash device in a 4 x 4 mm 20-QFN package, so any replacement must preserve that footprint and must be checked for peripheral, memory, clock, and programming compatibility. No cross-brand drop-in replacement has been substantiated.
Is C8051F800-GU the same as C8051F800-GM?
The C8051F800-GU is a closely related C8051F800-family option, but suffix-specific ordering, temperature, and packaging details must be confirmed before substitution. Both are associated with the same 8051-family microcontroller family, while the target C8051F800-GM is specified as a 25 MHz device with 16 kB Flash in a 20-QFN 4 x 4 mm package. Confirm the manufacturer ordering table, pin table, and operating-temperature grade before approving a replacement.
What is the best drop-in replacement for C8051F800-GM?
No universally qualified cross-brand drop-in replacement is established for the C8051F800-GM in the available manufacturer and cross-reference information. The C8051F800-GU is the closest same-family candidate, but a production substitution still requires confirmation of package geometry, exposed-pad treatment, electrical ratings, peripheral mapping, startup behavior, and firmware support. A device with similar headline specifications is not automatically pin-to-pin compatible.
C8051F800-GM vs C8051F990-GM - which is better for an analog control system?
The C8051F800-GM is the safer choice when the existing design is specifically built around its 25 MHz 8051 core, 16 kB Flash, 0.5 kB RAM, 10-bit 16-channel 500 ksps ADC, DAC, comparator, and QFN-20 footprint. The C8051F990-GM appears in a manufacturer cross-reference search, but the available information does not establish full pin compatibility or identical peripheral behavior. Choose it only after reviewing both datasheets and validating the application firmware.
When should I choose C8051F800-GM over another 8-bit mixed-signal MCU?
Choose the C8051F800-GM when a design needs an established 8051 software platform, a 25 MHz operating rate, 16 kB of Flash, 0.5 kB of RAM, and an integrated 10-bit 16-channel ADC with 500 ksps throughput. Its DAC, comparator, temperature sensor, three 16-bit timers, and 17 I/O pins reduce the need for external devices. For designs requiring a different memory map, more RAM, another package, or a different ecosystem, evaluate a newer MCU family instead.
Is C8051F800-GM suitable for portable medical equipment?
The C8051F800-GM is suitable as the basis of compact portable medical equipment when the system can accommodate an 8051 architecture and the manufacturer's electrical, EMC, and safety requirements are met. Silicon Labs identifies portable medical equipment as a suitable application and highlights the MCU's analog integration. Its 1.8 V to 3.6 V supply range, 16 kB Flash, 0.5 kB RAM, and 16-channel ADC support low-power measurement products, but medical-device qualification remains a system-level responsibility.
How much power does C8051F800-GM consume?
The C8051F800-GM operates from 1.8 V to 3.6 V, but the available manufacturer product page does not publish a complete operating-current, sleep-current, or shutdown-current table for this page. According to the manufacturer family documentation, current consumption depends on clock configuration, active peripherals, Flash execution state, and analog activity. Use the C8051F800 datasheet's operating-characteristics tables to size the supply and estimate battery life before finalizing a portable design.
What peripherals are integrated in C8051F800-GM?
The C8051F800-GM integrates a 10-bit 16-channel ADC rated at 500 ksps, an on-chip DAC, one comparator, an on-chip temperature sensor, and three 16-bit timers. According to the Silicon Labs manufacturer product page, the device also provides 16 kB Flash, 0.5 kB RAM, 17 general-purpose I/O pins, and additional communication interfaces. These resources support mixed analog and digital designs without requiring separate converters for every measurement function.
Where to buy C8051F800-GM online?
The C8051F800-GM can be requested through the Request a Quote form on this page. The form is the appropriate route for checking current unit availability, order quantities, delivery timing, and any authorized sourcing conditions. Because the exact C8051F800-GM suffix matters, include the full manufacturer part number C8051F800-GM in the request and identify the required QFN-20 package and operating grade.
What is the price of C8051F800-GM?
Current commercial terms for the C8051F800-GM should be obtained through the Request a Quote form on this page. The form supports the exact MPN and package configuration while allowing current availability, volume breaks, and delivery schedules to be reviewed. Confirm the complete ordering suffix before accepting a quotation, because related C8051F800 variants can differ in temperature grade, package, or reel configuration.
What is the lead time for C8051F800-GM?
Request the current lead time through the Request a Quote form on this page using the full part number C8051F800-GM. Lead time can depend on the required package suffix, order quantity, production condition, and factory availability. For a new production design, also request a lifecycle confirmation and reasonable forecast so the sourcing schedule can be evaluated alongside the technical specifications.
Does C8051F800-GM comply with RoHS and REACH?
The C8051F800-GM is identified as RoHS-compliant in its component listing. According to the manufacturer's environmental-material documentation, additional declarations such as REACH, halogen-free status, and conflict-minerals compliance should be confirmed for the exact ordering suffix and shipment configuration. Automotive qualification should not be inferred from RoHS status; the C8051F800-GM is an industrial-temperature MCU unless the manufacturer explicitly states otherwise.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা C8051F800-GM — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the C8051F800-GM when the design needs a compact 8051-based mixed-signal controller with 16 kB Flash, 0.5 kB RAM, 17 I/O pins, and integrated analog conversion. Its 25 MHz core, 16-channel 10-bit ADC, DAC, comparator, temperature sensor, and three 16-bit timers make it particularly useful for portable medical instruments, industrial sensors, capacitive-touch controls, and compact monitoring nodes. The C8051F800-GU is the closest same-family drop-in candidate when its ordering details and pin configuration match the target, but every substitution should be checked against the manufacturer ordering and pin tables. Do not select C8051F990-GM or another related MCU solely from headline similarities; verify package geometry, peripheral mapping, memory organization, programming behavior, and firmware requirements. If a project needs substantially more RAM, flash, analog resolution, or modern connectivity, evaluate a newer MCU family rather than forcing a cross-generation replacement.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য C8051F800-GU
Package 20-QFN (4x4 mm) 20-QFN (4x4 mm)
Brand Silicon Labs Silicon Labs
Processor Core 8-bit 8051 8-bit 8051
Maximum Clock Frequency 25 MHz 25 MHz
Flash Memory 16 kB 16 kB
RAM 0.5 kB 0.5 kB
Supply Voltage Range 1.8 V to 3.6 V 1.8 V to 3.6 V
ADC 10-bit, 16 channels, 500 ksps 10-bit, 16 channels, 500 ksps
General-Purpose I/O 17 pins 17 pins
Timers 3 x 16-bit 3 x 16-bit

মূল পার্থক্যসমূহ

  • High analog integration in a compact package (বনামC8051F800-GU)
  • Purpose-built mixed-signal processing (বনামC8051F800-GU)
  • Low-voltage system integration (বনামC8051F800-GU)

ডিজাইন নোট

Use the manufacturer QFN-20 land pattern and thermal-pad recommendations directly. Place the required bypass capacitors close to their supply pins, connect the exposed pad using the prescribed via arrangement, and keep analog reference and input routing away from switching nodes. Because the device combines sensitive analog conversion with a 25 MHz digital core, a solid return-plane strategy is essential for predictable ADC noise and measurement repeatability.

Route analog inputs as short, continuous traces over a stable ground reference and avoid switching-current paths beneath the ADC inputs. Keep the analog reference connection compact and follow the datasheet's recommended bypass arrangement. External sensor cables can inject industrial noise, so place protection and filtering at the connector and verify the resulting source impedance against the ADC sampling requirements rather than relying only on software averaging.

Design the 1.8 V to 3.6 V supply for the worst-case ADC conversion rate, processor activity, and peripheral load. Place local high-frequency decoupling at the supply pins and separate analog-sensitive routing from digital return currents as far as the package and board architecture permit. For battery-powered products, calculate average consumption from measured active and sleep states because peripheral configuration can materially change the total energy required by each acquisition cycle.

Do not assume that a related C8051F80x ordering suffix is automatically interchangeable. Before substituting C8051F800-GU, compare the manufacturer pin table, package drawing, exposed-pad requirements, temperature grade, Flash organization, and boot or programming behavior. Also avoid treating the 500 ksps ADC figure as a guaranteed sustained system throughput; sampling time, source impedance, channel switching, and firmware processing determine the achievable conversion rate.

কমপ্লায়েন্স তথ্য

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

RoHS compliance is identified in the component listing. No exact ordering-suffix environmental declaration for REACH, halogen-free status, or conflict minerals was established.

ডেটা যাচাই করা হয়েছে: 2026-11-15 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

C8051F800-GM C8051F800-GM datasheet C8051F800-GM datasheet pdf C8051F800-GM pinout C8051F800-GM schematic C8051F800-GM equivalent C8051F800-GM replacement C8051F800-GM cross reference C8051F800-GM vs C8051F800-GU C8051F800-GM footprint C8051F800-GM price C8051F800-GM stock Silicon Labs C8051F800-GM C8051F800 25MHz mixed signal MCU C8051F800 QFN20 pinout

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Silicon Labs C8051F800-GM C8051F800-GU C8051F80x C8051F990-GM mixed-signal MCU 8-bit microcontroller 8051 core embedded microcontroller system-on-chip semiconductor 10-bit ADC 500 ksps ADC DAC comparator on-chip temperature sensor 16-bit timer capacitive touch QFN-20 QFN family surface mount SMD Flash memory RAM RoHS
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন