C8051F800-GM - 25MHz Mixed-Signal MCU | Silicon Labs
Référence : C8051F800-GM ✓ ActifC8051F800-GM Présentation
A mixed-signal MCU combines a digital microcontroller core with analog measurement or output circuitry on one integrated device. The C8051F800-GM belongs to the hierarchy of 8-bit MCU, embedded microcontroller, mixed-signal MCU, and semiconductor. Integrating the ADC, DAC, comparator, timers, communication interfaces, and Flash memory reduces component count in compact embedded systems while keeping analog control and digital processing in one package.
Key features include 16 kB of programmable Flash, 512 bytes of RAM, a 10-bit ADC with 16 channels and 500 ksps throughput, an on-chip DAC, one comparator, an integrated temperature sensor, and three 16-bit timers. The 17 I/O pins provide flexible connections for sensors, displays, actuators, and serial peripherals. The 1.8 V to 3.6 V operating range supports low-voltage embedded equipment.
The device is positioned as a compact stand-alone system-on-chip for designs requiring both digital logic and analog signal acquisition. Its 25 MHz processing rate supports event-driven control, data acquisition, capacitive-touch processing, and communication-oriented firmware. Multiple timers provide independent timing for sampling, pulse generation, debouncing, or motor and display control, while the ADC allows the MCU to process measured signals without a separate converter.
Typical applications include portable medical equipment, industrial sensing, capacitive-touch interfaces, battery-powered instruments, environmental monitoring, compact control panels, and connected sensor nodes. The manufacturer identifies the C8051F800-GM as suitable for portable medical equipment, while its analog peripherals support measurement-intensive products that need a small PCB area and low component count.
Designers should verify the exposed-pad connection, decoupling requirements, clock configuration, analog-reference arrangement, and programming interface against the manufacturer datasheet before layout release. Because this is a mixed-signal device, separating sensitive analog inputs from switching nodes and providing a clean reference implementation are as important as routing digital signals.
This page combines manufacturer specifications, application guidance, package information, and carefully qualified replacement information to support faster MCU selection. It also distinguishes direct hardware substitutions from related devices that require different packages, firmware, or peripheral configurations.
Alternatives de remplacement direct pour C8051F800-GM — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
C8051F800-GU
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
C8051F800-GM Valeurs maximales et caractéristiques électriques
| Microcontroller Type | Mixed-signal 8-bit MCU |
| Processor Core | 8051, 8-bit |
| Fréquence d'horloge maximale | 25 MHz |
| Flash Memory | 16 kB (16K x 8) |
| RAM | 0.5 kB (512 x 8) |
| Supply Voltage Range | 1.8 V to 3.6 V |
| ADC Resolution | 10 bit |
| ADC Channel Count | 16 channels |
| ADC Sampling Rate | 500 ksps |
| DAC | On-chip DAC |
| Comparator Count | 1 |
| On-Chip Temperature Sensor | Present |
| Timer Count | 3 x 16-bit timers |
| General-Purpose I/O Pins | 17 pins |
| Plage de température de fonctionnement | -40°C to +85°C |
| Boîtier | 20-QFN, 4 x 4 mm |
| Type de montage | Surface mount |
| Statut RoHS | Compliant |
Guide de configuration des broches du C8051F800-GM 20-qfn, 4 x 4 mm
Configuration des broches du C8051F800-GM (boîtier 20-qfn, 4 x 4 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour C8051F800-GM.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
C8051F800-GM convient pour 6 applications: Portable Medical Equipment, Industrial Sensing and Control, Capacitive-Touch User Interface, Battery-Powered Instrument, Environmental Monitoring Node, Compact Control Panel.
Portable Medical Equipment
The C8051F800-GM fits portable medical equipment that combines sensor acquisition with local control in a compact enclosure. Its 10-bit ADC provides 16 channels at up to 500 ksps, allowing multiple low-frequency biomedical inputs to be sampled without a separate converter. The integrated DAC, comparator, and temperature sensor also reduce board area, while 16 kB of Flash and 0.5 kB of RAM support control firmware and calibration data. In a low-voltage instrument, the 1.8 V to 3.6 V supply range simplifies rail planning. The design must still apply the required medical, safety, EMC, and risk-control processes at the complete-system level.
Recommandé
Industrial Sensing and Control
The C8051F800-GM is suited to compact industrial sensing modules that must acquire several analog channels and execute local control logic. Its 16-channel 10-bit ADC, 500 ksps conversion capability, three 16-bit timers, and 17 I/O pins support sensor conditioning, threshold monitoring, actuator timing, and periodic sampling. The 25 MHz 8051 core provides enough responsiveness for event-driven control, while the 4 x 4 mm QFN-20 package supports dense controller boards. A robust implementation should provide clean analog grounding, local reference decoupling, surge protection at external connectors, and defined recovery behavior for sensor or communication faults.
Recommandé
Capacitive-Touch User Interface
The C8051F800-GM supports capacitive-touch interface designs where limited board space and local signal processing are important. Its mixed-signal resources allow touch-capacitance measurement to coexist with button handling, indicator control, and communications in one 4 x 4 mm QFN-20 package. The 25 MHz core can process timing-sensitive touch events, while the three 16-bit timers support periodic scanning and debounce functions. Designers should follow the manufacturer's touch-measurement recommendations, preserve clean sensor routing, calibrate electrode sensitivity, and validate operation across humidity, temperature, and grounding variations.
Recommandé
Battery-Powered Instrument
The C8051F800-GM fits battery-powered instruments where low-voltage operation and analog integration can reduce component count. Its 1.8 V to 3.6 V operating range accommodates 1.8 V and 2.5 V system rails, while the 10-bit ADC, DAC, comparator, and temperature sensor support measurement, excitation, and calibration functions. Sixteen kilobytes of Flash stores firmware and configuration data, and 0.5 kB of RAM is adequate for compact control tasks. Power-budget calculations should use the manufacturer's active and inactive current tables, enable unused peripherals, and place the device into the appropriate low-power mode whenever the measurement cycle permits.
Recommandé
Environmental Monitoring Node
The C8051F800-GM is appropriate for environmental monitoring nodes that combine analog sensors with periodic digital reporting. Sixteen ADC channels can serve temperature, humidity, gas, or level-sensing inputs, while the comparator and integrated temperature sensor support threshold and thermal monitoring. Three 16-bit timers enable regular sampling intervals, sensor warm-up timing, and communication scheduling. The 4 x 4 mm QFN-20 package helps reduce node size, and the 1.8 V to 3.6 V range supports low-energy operation. Production designs should include input protection, low-noise reference routing, moisture-resistant assembly practices, and firmware checks that detect implausible sensor readings.
Recommandé
Compact Control Panel
The C8051F800-GM can serve as the controller in a compact operator panel containing sensors, indicators, and a communication link. Its 17 I/O pins support buttons, status LEDs, and discrete control signals, while the ADC handles analog controls or diagnostics and the DAC can generate an analog setpoint or test signal. The 25 MHz processor permits responsive interaction, and the small QFN-20 package leaves space for connectors and display circuitry. Because a human-interface panel is sensitive to ESD and ground noise, use protected connector routes, separated analog and digital return paths, and defined firmware handling for stuck or shorted controls.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour C8051F800-GM — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | C8051F800-GU |
|---|---|---|
| Package | 20-QFN (4x4 mm) | 20-QFN (4x4 mm) |
| Brand | Silicon Labs | Silicon Labs |
| Processor Core | 8-bit 8051 | 8-bit 8051 |
| Maximum Clock Frequency | 25 MHz | 25 MHz |
| Flash Memory | 16 kB | 16 kB |
| RAM | 0.5 kB | 0.5 kB |
| Supply Voltage Range | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| ADC | 10-bit, 16 channels, 500 ksps | 10-bit, 16 channels, 500 ksps |
| General-Purpose I/O | 17 pins | 17 pins |
| Timers | 3 x 16-bit | 3 x 16-bit |
Principaux différenciateurs
- High analog integration in a compact package (vs C8051F800-GU)
- Purpose-built mixed-signal processing (vs C8051F800-GU)
- Low-voltage system integration (vs C8051F800-GU)
Notes de conception
Use the manufacturer QFN-20 land pattern and thermal-pad recommendations directly. Place the required bypass capacitors close to their supply pins, connect the exposed pad using the prescribed via arrangement, and keep analog reference and input routing away from switching nodes. Because the device combines sensitive analog conversion with a 25 MHz digital core, a solid return-plane strategy is essential for predictable ADC noise and measurement repeatability.
Route analog inputs as short, continuous traces over a stable ground reference and avoid switching-current paths beneath the ADC inputs. Keep the analog reference connection compact and follow the datasheet's recommended bypass arrangement. External sensor cables can inject industrial noise, so place protection and filtering at the connector and verify the resulting source impedance against the ADC sampling requirements rather than relying only on software averaging.
Design the 1.8 V to 3.6 V supply for the worst-case ADC conversion rate, processor activity, and peripheral load. Place local high-frequency decoupling at the supply pins and separate analog-sensitive routing from digital return currents as far as the package and board architecture permit. For battery-powered products, calculate average consumption from measured active and sleep states because peripheral configuration can materially change the total energy required by each acquisition cycle.
Do not assume that a related C8051F80x ordering suffix is automatically interchangeable. Before substituting C8051F800-GU, compare the manufacturer pin table, package drawing, exposed-pad requirements, temperature grade, Flash organization, and boot or programming behavior. Also avoid treating the 500 ksps ADC figure as a guaranteed sustained system throughput; sampling time, source impedance, channel switching, and firmware processing determine the achievable conversion rate.
Informations de conformité
RoHS compliance is identified in the component listing. No exact ordering-suffix environmental declaration for REACH, halogen-free status, or conflict minerals was established.