onsemi

CD4020BCN - 14-Bit Binary Counter | onsemi | DIP

MPN: CD4020BCN ✗ জীবনকালের সমাপ্তি
16-PDIP, 0.300 inch (7.62 mm) pitch Package Negative edge Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

CD4020BCN সারাংশ

The onsemi CD4020BCN is a 14-stage ripple-carry binary counter and divider with one counter element, a 14-bit count range, negative-edge clocking, and a 16-pin PDIP package. Its fourteen independently available outputs support binary division by 2 through 16,384, while a high-level RESET input returns the counter to its all-zero state.

A CMOS binary counter is a sequential logic device that stores and advances a binary count when triggered by a clock edge. The CD4000 family belongs to the broader CMOS logic hierarchy, where counters complement flip-flops, latches, gates, and decoders. This distinction matters because a counter preserves multi-bit state across clock cycles instead of producing only a single combinational output.

Key features include fourteen master-slave flip-flop stages, negative-transition clock operation, individual Q0 through Q13 outputs, and Schmitt-trigger action on the clock input. The Schmitt-trigger clock behavior improves tolerance of slow input rise and fall times, which helps reduce multiple transitions in practical oscillator and divider circuits. The counter advances by one count on each negative clock transition rather than on the positive transition.

Each ripple stage clocks the following stage, allowing the outputs to change in a defined sequence during a ripple transition. The RESET input provides a common mechanism for restarting a divided count in timer, sequencer, and periodic-waveform systems. Although the device divides a clock, it is not a programmable divider; each division ratio is selected by connecting the appropriate Q output back to the clock input.

Typical uses include digital timers, frequency dividers, pulse-rate counters, clock-generation circuits, and sequential timing systems. In a divide-by-16 arrangement, Q4 feeds the clock input and the circuit produces one output transition for every 16 input cycles. Divide ratios through Q13 allow substantially longer periods, while the available high-order outputs can serve as programmable timer taps.

The main design consideration is clock-edge selection. Because counting occurs on the negative transition, input waveforms with slow edges or excessive ringing may create false transitions unless the clock meets the device's input timing requirements. External filtering or a suitable oscillator should provide clean transitions, and unused counter outputs should remain properly terminated according to the manufacturer's circuit guidance.

This product page combines the counter's core operating characteristics, package-level details, application guidance, drop-in replacement analysis, and parameter-by-parameter comparisons to support component selection, PCB planning, and legacy-design maintenance.

এর জন্য ড্রপ-ইন বিকল্প CD4020BCN — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible CD4020BCN (একই form factor এবং footprint) — পার্থক্য রয়েছে Clock Input, Counter Type, Logic Family.

Texas Instruments
Clock Input: CP
Counter Type: Binary ripple-carry counter and divider
Logic Family: CMOS
এর সাথে তুলনা করুন CD4020BCN →

CD4020BE

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Texas Instruments
📦 16-PDIP
Binary ripple-carry counter and divider · CMOS · 1 element · 14 stages · Negative edge · CP · Active-high master reset · 12 outputs

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

CD4020BE

✅ ড্রপ-ইন
Texas Instruments
📦 16-PDIP
Binary ripple-carry counter and divider · CMOS · 1 element · 14 stages · Negative edge · CP · Active-high master reset · 12 outputs

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

CD4020BE

✅ ড্রপ-ইন
Texas Instruments
📦 16-PDIP
Binary ripple-carry counter and divider · CMOS · 1 element · 14 stages · Negative edge · CP · Active-high master reset · 12 outputs

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

HEF4020BT

✅ ড্রপ-ইন
📦 16-PDIP
Same 14-stage counter and 16-pin arrangement; the published cross-reference table does not quantify an electrical difference

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

CD4020BE

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Texas Instruments
📦 16-PDIP
Binary ripple-carry counter and divider · CMOS · 1 element · 14 stages · Negative edge · CP · Active-high master reset · 12 outputs

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

CD4020BCN সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Counter Type 14-stage ripple-carry binary counter
Number of Counter Elements 1 element
Count Length 14 bits
Clock Edge Negative edge
Logic Family CD4000 CMOS
Counter Architecture Master-slave flip-flop stages
আউটপুটের সংখ্যা 14 outputs (Q0 through Q13)
Reset Function Asynchronous reset to all zeros when RESET is high
Clock Input Schmitt-trigger input
Maximum Division Ratio 16,384:1 at Q13
প্যাকেজ 16-PDIP, 0.300 inch (7.62 mm) pitch
মাউন্টিং টাইপ Through-hole

CD4020BCN পিন কনফিগারেশন

DIP-16 Package Pinout Diagram DIP-16 16-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 DIP-16
পিন 1 CLK — Schmitt-trigger clock input; the counter advances on the negative transition
পিন 2 Q0 — Counter output Q0
পিন 3 Q1 — Counter output Q1
পিন 4 Q2 — Counter output Q2
পিন 5 Q3 — Counter output Q3
পিন 6 Q4 — Counter output Q4
পিন 7 Q5 — Counter output Q5
পিন 8 VSS — Ground supply connection
পিন 9 Q6 — Counter output Q6
পিন 10 Q7 — Counter output Q7
পিন 11 Q8 — Counter output Q8
পিন 12 Q9 — Counter output Q9
পিন 13 Q10 — Counter output Q10
পিন 14 Q11 — Counter output Q11
পিন 15 RESET — High-level reset input that clears all counter outputs
পিন 16 VDD — Positive supply connection

সাধারণ ব্যবহার

CD4020BCN এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Digital Frequency Divider, Pulse and Event Counter, Periodic Timer and Sequencer, Clock Division and Output Tap Generation, Waveform and Repetition Rate Control, Legacy Instrumentation and Control.

⚡

Digital Frequency Divider

The CD4020BCN is suitable for reducing a periodic clock to a lower frequency by feeding a selected Q output back to the clock input. Q0 provides a 2:1 ratio, Q4 provides a 16:1 ratio, and Q13 provides a 16,384:1 ratio. Its 14 master-slave stages permit multiple timing taps from one oscillator, while negative-edge counting makes output-edge relationships predictable. The main design task is ensuring that the feedback transition meets the clock input requirements and that the divider ratio is derived from the correct Q output. For low-frequency timing or pulse-rate systems, this arrangement provides simple adjustable division without a programmable controller.

🏭

Pulse and Event Counter

The CD4020BCN can count incoming pulses and retain the total as a 14-bit binary value. Each negative clock transition advances the count by one, allowing events to be accumulated from 0 through 16,383 before overflow. The individual Q0 through Q13 outputs let a controller observe low-order count bits directly or decode a narrower portion for display or control. The Schmitt-trigger clock input improves tolerance of slow input transitions, but pulse amplitude, width, and edge rate must still be checked. A high RESET pulse returns the counter to zero and provides a clean event-clearing mechanism.

🖥️

Periodic Timer and Sequencer

A CD4020BCN oscillator and divider network can create repeating timing intervals without a programmable timer. By resetting the counter and selecting a Q-output tap, the circuit produces a delay corresponding to 2, 4, 8, or more clock periods. The RESET input supports repeatable starts, making the device appropriate for sequencer timing, process-step intervals, and periodic control pulses. Designers should account for propagation delay through the ripple stages when determining the exact output timing relative to the reset edge. Clock stability directly determines the accuracy of the generated interval.

🌐

Clock Division and Output Tap Generation

The CD4020BCN can divide a high-frequency clock into several related lower-frequency signals because all 14 counter outputs are accessible. This allows a single oscillator to feed a divide-by-2 channel and a divide-by-256 channel without using separate divider chains. The multiple taps simplify designs that need both a fast reference and a slower strobe. The ripple architecture introduces cumulative propagation delay toward Q13, so short-period applications should use lower-numbered outputs when timing alignment is critical. The selected tap must also be connected to the clock input in a configuration that does not create race or ringing problems.

💡

Waveform and Repetition Rate Control

The CD4020BCN can serve as the repetition-rate element in LED, alarm, relay, and industrial pulse systems. An external oscillator drives the clock, while a selected Q output creates the repeated output pulse and RESET establishes the start of each count sequence. Because fourteen division taps are available, one counter can support different repetition periods with limited external switching. The Schmitt-trigger clock characteristic helps reject unwanted transitions from slowly changing oscillator signals. For safety- or timing-critical systems, include reset synchronization and verify worst-case counter propagation delay before relying on the selected output edge.

🔧

Legacy Instrumentation and Control

The CD4020BCN remains useful in legacy instrumentation, educational equipment, and control systems that depend on a through-hole CMOS counter. Its 16-PDIP package is easier to inspect, rework, and socket than a fine-pitch surface-mount package. Fourteen count outputs support binary decoding, status indication, and programmable event timing. Because this is a legacy-style counter, the design should verify the exact supplier's supply range, clock-frequency limit, temperature grade, and output-drive capability from the applicable manufacturer datasheet. Socketed prototyping can help isolate timing or grounding problems before a production assembly is committed.

What is the CD4020BCN?
The CD4020BCN is a 14-stage CMOS ripple-carry binary counter and divider in a 16-PDIP package. According to the manufacturer datasheet, it contains 14 master-slave flip-flop stages, advances on each negative clock transition, and provides 14 individual outputs labeled Q0 through Q13. It also includes an active-high reset input that returns the count to zero, making the device useful for digital timers, frequency division, and programmable timing circuits.
How do I use the CD4020BCN as a frequency divider?
The CD4020BCN can divide a clock by connecting one Q output to its clock input and using a higher-order output as the divided signal. For example, feeding Q4 back to the clock creates a divide-by-16 output, while Q13 supports division by 16,384. The manufacturer datasheet describes counting on the negative clock transition, so the feedback edge and output transition must be considered when defining the timing relationship. Only one feedback output is normally selected for each fixed division ratio.
Which CD4020BCN output gives the highest division ratio?
Q13 provides the highest directly available division ratio of 16,384:1 because the counter has 14 stages numbered from Q0 through Q13. Q0 represents a divide-by-2 tap, Q1 a divide-by-4 tap, and each subsequent output doubles the division ratio. The manufacturer datasheet identifies Q0 through Q13 as individual outputs. A division ratio can therefore be implemented by connecting the selected Q output back to the clock input.
Is the CD4020BCN clocked on the rising or falling edge?
The CD4020BCN is clocked on the negative transition of the clock input, as stated in the manufacturer datasheet. This means the count advances when the clock changes from high to low rather than low to high. The clock input includes Schmitt-trigger action, which helps reject false transitions caused by slow input edges, but the incoming waveform must still satisfy the electrical timing requirements. Verify edge polarity in test equipment or simulation before connecting an externally generated waveform.
How does the RESET input work on the CD4020BCN?
Driving the CD4020BCN RESET input high resets all 14 counter stages to the all-zero state, so Q0 through Q13 read 0. The manufacturer datasheet describes the counter as having a high-level reset input. In a timer or sequencer, this function can establish a repeatable starting count, clear a divider after an output pulse, or synchronize an external event with the internal counting sequence.
What are the key specifications of CD4020BCN that engineers should know?
The CD4020BCN is a 14-bit, single-element ripple-carry binary counter with negative-edge clocking and 14 master-slave stages. The manufacturer datasheet identifies a 16-PDIP package, individual Q0 through Q13 outputs, a high-level reset, and Schmitt-trigger action on the clock input. Its useful division ratios range from 2:1 through 16,384:1 when an output is fed back to the clock. Supply limits and timing limits should be taken directly from the manufacturer datasheet for the selected production source.
Where can I download the CD4020BCN datasheet PDF?
The CD4020BCN datasheet can be accessed through the manufacturer-linked datasheet listing and the indexed datasheet pages for this part. The datasheet is the authoritative source for the complete pinout, supply-voltage limits, switching characteristics, clock limits, and recommended operating conditions. Use the pin-description table when assigning PCB tracks, especially for RESET and the exposed supply pins on the 16-pin PDIP package.
Where can I find the CD4020BCN pinout?
The CD4020BCN pinout is defined in the manufacturer datasheet and corresponds to a 16-pin PDIP counter: CLK is pin 1, Q0 through Q5 are pins 2 through 7, VSS is pin 8, Q6 through Q11 are pins 9 through 14, RESET is pin 15, and VDD is pin 16. Use the manufacturer pin-description table when assigning nets and checking the counter orientation on the board.
Where can I buy CD4020BCN and request current availability?
Current CD4020BCN availability and commercial terms can be requested through the Request a Quote form on this page. The form is the appropriate route for checking stock, minimum order quantity, lead time, and the exact 16-PDIP ordering configuration. Quote requests should identify CD4020BCN and the required quantity so the procurement team can confirm current lifecycle and delivery information.
What is the price of CD4020BCN?
Use the Request a Quote form on this page to obtain the current unit price for CD4020BCN in the required quantity. The structured price fields update independently, and purchase decisions should use the quoted amount rather than a historical catalog figure. Include the desired package, order quantity, delivery location, and target date so the commercial response reflects the actual procurement requirement.
What is the lead time for CD4020BCN?
The current lead time for CD4020BCN should be confirmed through the Request a Quote form on this page. Lead time can depend on the requested quantity, package configuration, manufacturing source, and inventory position, so a single production date cannot be assumed from catalog information. Provide the required quantity and target delivery date in the request to obtain a schedule suitable for the production plan.
Is CD4020BCN in stock?
Current CD4020BCN stock status is best confirmed through the Request a Quote form on this page. The form allows procurement to review the exact 16-PDIP part against current inventory and production availability without relying on a static listing. Include a requested quantity and delivery date, since a small evaluation order and a production order may have different allocation and scheduling conditions.
What can replace CD4020BCN?
The CD4020BCN can be replaced by a pin-compatible 14-stage ripple-carry binary counter in the same 16-PDIP footprint, provided the clock edge, reset polarity, output arrangement, supply voltage, and timing limits match. CD4020BE variants from Texas Instruments and STMicroelectronics are identified as functional cross references in the replacement data. Before substitution, compare the manufacturer datasheets and account for any source-specific grade, timing, or marking differences.
Is CD4020BCN the same as CD4020BE?
CD4020BCN and CD4020BE implement the same core function of a 14-stage ripple-carry binary counter, but they are ordered from different manufacturers or source configurations. The CD4020BCN listing identifies a 16-PDIP package, while the comparison data describes CD4020BE as a CMOS 14-stage ripple-carry counter with master-slave stages and a high-level reset. A CD4020BE is a viable drop-in candidate only when its package and electrical specifications match the exact source part.
CD4020BCN vs CD4020BE: which is better for a timer?
Choose CD4020BCN when its onsemi datasheet, qualification status, supply limits, and timing characteristics match the approved timer design. Choose CD4020BE when that part provides the required 14-stage, negative-edge counter behavior in the same 16-PDIP footprint and its manufacturer-specific electrical limits are acceptable. The comparison data confirms the shared counter architecture, but it does not establish identical timing or temperature ratings, so review both manufacturer datasheets before replacing the original part.
What is the best STMicroelectronics equivalent for CD4020BCN?
The STMicroelectronics CD4020BE is the cross-brand equivalent identified for CD4020BCN because it provides the same 14-stage ripple-carry binary-counter function and can match the 16-PDIP footprint. According to the manufacturer datasheet, it advances on a negative clock transition and uses a high-level reset, matching the core operating behavior. Confirm pin orientation, supply-voltage range, clock-frequency limit, and temperature grade in the STMicroelectronics datasheet before treating it as a drop-in production replacement.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা CD4020BCN — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the CD4020BCN when a design needs a 14-stage negative-edge binary counter with individual Q0 through Q13 taps and a through-hole 16-PDIP footprint. It is especially useful for simple frequency division, pulse counting, and repetitive timers where a programmable divider would be unnecessary. Select CD4020BE from Texas Instruments, STMicroelectronics, or another listed source when that manufacturer's electrical ratings, qualification, and lifecycle position are approved for the application. HEF4020BT is a cross-brand option when its clock, reset, and supply specifications satisfy the design. For designs based on SN74LS93DR or SN74LS90DR, assess the counting-width difference: those parts provide smaller counter ranges and are not one-for-one functional substitutes for all 14 CD4020BCN outputs.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য CD4020BE CD4020BE CD4020BE HEF4020BT CD4020BE
Brand onsemi onsemi Texas Instruments STMicroelectronics Nexperia Rochester Electronics
Package 16-PDIP 16-PDIP 16-PDIP 16-PDIP 16-PDIP 16-PDIP
Logic Family CD4000 CMOS CMOS CMOS CMOS 4000-series CMOS CMOS

মূল পার্থক্যসমূহ

  • Provides fourteen separately accessible division taps (বনামSN74LS93DR)
  • Direct 16-bit binary counting range (বনামSN74LS90DR)
  • Through-hole DIP construction supports inspection and socketed maintenance (বনামHEF4020BT)
  • Negative-edge operation is explicit in the ordering information (বনামCD4020BE)

ডিজাইন নোট

Use the negative clock transition as the defining count edge and preserve a clean falling edge at the CLK input. The Schmitt-trigger input improves rejection of slow-edge false transitions, but ringing near the switching threshold can still cause an incorrect count. Keep the oscillator or pulse source close to pin 1, maintain a low-impedance ground connection at VSS, and test the waveform at the device pin rather than only at the driver output.

Place the clock source and any Q-output feedback close to the counter to minimize susceptibility to capacitive coupling and propagation delay. Connect the 16-pin PDIP according to the manufacturer pin-description table, observing pin 1 orientation and placing the ground connection on pin 8. When using a high-order output such as Q13, include cumulative ripple delay when checking timing relationships. Route the RESET net away from clock and feedback traces to prevent unintended clearing pulses.

Do not select Q13 merely because it provides the longest division interval; its ripple delay is greater than that of the lower-numbered outputs. Similarly, do not assume every CD4020BE source has identical timing, temperature, or supply limits even though the counter architecture is the same. Before a cross-brand replacement, compare clock frequency, supply range, reset timing, output-drive capability, and package dimensions in the applicable manufacturer datasheet.

Decouple the positive supply at pin 16 with a local bypass capacitor and provide a low-resistance return path at pin 8. The capacitor should be placed close enough to the device to suppress supply transients associated with output switching, while keeping loop area small. Confirm the capacitor voltage rating and dielectric requirements against the operating environment. Do not infer a valid capacitor value from the counter logic alone; use the manufacturer circuit recommendations and the calculated clock-current requirement.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The available technical listings identify the CD4020BCN as a CMOS counter but do not state the requested compliance attributes. Its legacy through-hole construction does not by itself establish RoHS, REACH, halogen-free, or conflict-minerals status.

ডেটা যাচাই করা হয়েছে: 2026-11-19 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

CD4020BCN datasheet CD4020BCN pinout CD4020BCN datasheet pdf CD4020BCN equivalent CD4020BCN replacement CD4020BCN cross reference CD4020BCN footprint CD4020BCN price CD4020BCN stock onsemi CD4020BCN CD4020BCN 14 bit counter CD4020BCN vs CD4020BE CD4020BCN frequency divider CD4020BCN 16-PDIP CD4020BCN negative edge counter

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

onsemi CD4020BCN CD4020BE HEF4020BT SN74LS93DR SN74LS90DR CD4000 CMOS logic binary counter ripple-carry counter frequency divider counter IC sequential logic CMOS master-slave flip-flop negative-edge clocking Schmitt trigger Q0 Q13 asynchronous reset 16-PDIP through-hole package digital timer pulse counter oscillator Fairchild Semiconductor
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন