CD4020BCN - 14-Bit Binary Counter | onsemi | DIP
MPN: CD4020BCN ✗ Akhir HayatCD4020BCN Ringkasan
A CMOS binary counter is a sequential logic device that stores and advances a binary count when triggered by a clock edge. The CD4000 family belongs to the broader CMOS logic hierarchy, where counters complement flip-flops, latches, gates, and decoders. This distinction matters because a counter preserves multi-bit state across clock cycles instead of producing only a single combinational output.
Key features include fourteen master-slave flip-flop stages, negative-transition clock operation, individual Q0 through Q13 outputs, and Schmitt-trigger action on the clock input. The Schmitt-trigger clock behavior improves tolerance of slow input rise and fall times, which helps reduce multiple transitions in practical oscillator and divider circuits. The counter advances by one count on each negative clock transition rather than on the positive transition.
Each ripple stage clocks the following stage, allowing the outputs to change in a defined sequence during a ripple transition. The RESET input provides a common mechanism for restarting a divided count in timer, sequencer, and periodic-waveform systems. Although the device divides a clock, it is not a programmable divider; each division ratio is selected by connecting the appropriate Q output back to the clock input.
Typical uses include digital timers, frequency dividers, pulse-rate counters, clock-generation circuits, and sequential timing systems. In a divide-by-16 arrangement, Q4 feeds the clock input and the circuit produces one output transition for every 16 input cycles. Divide ratios through Q13 allow substantially longer periods, while the available high-order outputs can serve as programmable timer taps.
The main design consideration is clock-edge selection. Because counting occurs on the negative transition, input waveforms with slow edges or excessive ringing may create false transitions unless the clock meets the device's input timing requirements. External filtering or a suitable oscillator should provide clean transitions, and unused counter outputs should remain properly terminated according to the manufacturer's circuit guidance.
This product page combines the counter's core operating characteristics, package-level details, application guidance, drop-in replacement analysis, and parameter-by-parameter comparisons to support component selection, PCB planning, and legacy-design maintenance.
Pilihan pengganti yang segera untuk CD4020BCN — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera CD4020BCN (sama faktor bentuk dan kaki) — berbeza dalam Clock Input, Counter Type, Logic Family.
CD4020BE
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →CD4020BE
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →CD4020BE
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →HEF4020BT
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
CD4020BE
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →CD4020BCN Penilaian maksimum & Ciri-ciri Elektrik
| Counter Type | 14-stage ripple-carry binary counter |
| Number of Counter Elements | 1 element |
| Count Length | 14 bits |
| Clock Edge | Negative edge |
| Logic Family | CD4000 CMOS |
| Counter Architecture | Master-slave flip-flop stages |
| Bilangan Output | 14 outputs (Q0 through Q13) |
| Reset Function | Asynchronous reset to all zeros when RESET is high |
| Clock Input | Schmitt-trigger input |
| Maximum Division Ratio | 16,384:1 at Q13 |
| Kemasan | 16-PDIP, 0.300 inch (7.62 mm) pitch |
| Jenis Pemasangan | Through-hole |
Konfigurasi Pin CD4020BCN
| Pin 1 | CLK — Schmitt-trigger clock input; the counter advances on the negative transition |
| Pin 2 | Q0 — Counter output Q0 |
| Pin 3 | Q1 — Counter output Q1 |
| Pin 4 | Q2 — Counter output Q2 |
| Pin 5 | Q3 — Counter output Q3 |
| Pin 6 | Q4 — Counter output Q4 |
| Pin 7 | Q5 — Counter output Q5 |
| Pin 8 | VSS — Ground supply connection |
| Pin 9 | Q6 — Counter output Q6 |
| Pin 10 | Q7 — Counter output Q7 |
| Pin 11 | Q8 — Counter output Q8 |
| Pin 12 | Q9 — Counter output Q9 |
| Pin 13 | Q10 — Counter output Q10 |
| Pin 14 | Q11 — Counter output Q11 |
| Pin 15 | RESET — High-level reset input that clears all counter outputs |
| Pin 16 | VDD — Positive supply connection |
Aplikasi Biasa
CD4020BCN patut untuk 6 aplikasis: Digital Frequency Divider, Pulse and Event Counter, Periodic Timer and Sequencer, Clock Division and Output Tap Generation, Waveform and Repetition Rate Control, Legacy Instrumentation and Control.
Digital Frequency Divider
The CD4020BCN is suitable for reducing a periodic clock to a lower frequency by feeding a selected Q output back to the clock input. Q0 provides a 2:1 ratio, Q4 provides a 16:1 ratio, and Q13 provides a 16,384:1 ratio. Its 14 master-slave stages permit multiple timing taps from one oscillator, while negative-edge counting makes output-edge relationships predictable. The main design task is ensuring that the feedback transition meets the clock input requirements and that the divider ratio is derived from the correct Q output. For low-frequency timing or pulse-rate systems, this arrangement provides simple adjustable division without a programmable controller.
Disebarkan
Pulse and Event Counter
The CD4020BCN can count incoming pulses and retain the total as a 14-bit binary value. Each negative clock transition advances the count by one, allowing events to be accumulated from 0 through 16,383 before overflow. The individual Q0 through Q13 outputs let a controller observe low-order count bits directly or decode a narrower portion for display or control. The Schmitt-trigger clock input improves tolerance of slow input transitions, but pulse amplitude, width, and edge rate must still be checked. A high RESET pulse returns the counter to zero and provides a clean event-clearing mechanism.
Disebarkan
Periodic Timer and Sequencer
A CD4020BCN oscillator and divider network can create repeating timing intervals without a programmable timer. By resetting the counter and selecting a Q-output tap, the circuit produces a delay corresponding to 2, 4, 8, or more clock periods. The RESET input supports repeatable starts, making the device appropriate for sequencer timing, process-step intervals, and periodic control pulses. Designers should account for propagation delay through the ripple stages when determining the exact output timing relative to the reset edge. Clock stability directly determines the accuracy of the generated interval.
Disebarkan
Clock Division and Output Tap Generation
The CD4020BCN can divide a high-frequency clock into several related lower-frequency signals because all 14 counter outputs are accessible. This allows a single oscillator to feed a divide-by-2 channel and a divide-by-256 channel without using separate divider chains. The multiple taps simplify designs that need both a fast reference and a slower strobe. The ripple architecture introduces cumulative propagation delay toward Q13, so short-period applications should use lower-numbered outputs when timing alignment is critical. The selected tap must also be connected to the clock input in a configuration that does not create race or ringing problems.
Disebarkan
Waveform and Repetition Rate Control
The CD4020BCN can serve as the repetition-rate element in LED, alarm, relay, and industrial pulse systems. An external oscillator drives the clock, while a selected Q output creates the repeated output pulse and RESET establishes the start of each count sequence. Because fourteen division taps are available, one counter can support different repetition periods with limited external switching. The Schmitt-trigger clock characteristic helps reject unwanted transitions from slowly changing oscillator signals. For safety- or timing-critical systems, include reset synchronization and verify worst-case counter propagation delay before relying on the selected output edge.
Disebarkan
Legacy Instrumentation and Control
The CD4020BCN remains useful in legacy instrumentation, educational equipment, and control systems that depend on a through-hole CMOS counter. Its 16-PDIP package is easier to inspect, rework, and socket than a fine-pitch surface-mount package. Fourteen count outputs support binary decoding, status indication, and programmable event timing. Because this is a legacy-style counter, the design should verify the exact supplier's supply range, clock-frequency limit, temperature grade, and output-drive capability from the applicable manufacturer datasheet. Socketed prototyping can help isolate timing or grounding problems before a production assembly is committed.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk CD4020BCN — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | CD4020BE | CD4020BE | CD4020BE | HEF4020BT | CD4020BE |
|---|---|---|---|---|---|---|
| Brand | onsemi | onsemi | Texas Instruments | STMicroelectronics | Nexperia | Rochester Electronics |
| Package | 16-PDIP | 16-PDIP | 16-PDIP | 16-PDIP | 16-PDIP | 16-PDIP |
| Logic Family | CD4000 CMOS | CMOS | CMOS | CMOS | 4000-series CMOS | CMOS |
Penyeberangsung Jelas
- Provides fourteen separately accessible division taps (vsSN74LS93DR)
- Direct 16-bit binary counting range (vsSN74LS90DR)
- Through-hole DIP construction supports inspection and socketed maintenance (vsHEF4020BT)
- Negative-edge operation is explicit in the ordering information (vsCD4020BE)
Catatan Desain
Use the negative clock transition as the defining count edge and preserve a clean falling edge at the CLK input. The Schmitt-trigger input improves rejection of slow-edge false transitions, but ringing near the switching threshold can still cause an incorrect count. Keep the oscillator or pulse source close to pin 1, maintain a low-impedance ground connection at VSS, and test the waveform at the device pin rather than only at the driver output.
Place the clock source and any Q-output feedback close to the counter to minimize susceptibility to capacitive coupling and propagation delay. Connect the 16-pin PDIP according to the manufacturer pin-description table, observing pin 1 orientation and placing the ground connection on pin 8. When using a high-order output such as Q13, include cumulative ripple delay when checking timing relationships. Route the RESET net away from clock and feedback traces to prevent unintended clearing pulses.
Do not select Q13 merely because it provides the longest division interval; its ripple delay is greater than that of the lower-numbered outputs. Similarly, do not assume every CD4020BE source has identical timing, temperature, or supply limits even though the counter architecture is the same. Before a cross-brand replacement, compare clock frequency, supply range, reset timing, output-drive capability, and package dimensions in the applicable manufacturer datasheet.
Decouple the positive supply at pin 16 with a local bypass capacitor and provide a low-resistance return path at pin 8. The capacitor should be placed close enough to the device to suppress supply transients associated with output switching, while keeping loop area small. Confirm the capacitor voltage rating and dielectric requirements against the operating environment. Do not infer a valid capacitor value from the counter logic alone; use the manufacturer circuit recommendations and the calculated clock-current requirement.
Maklumat Kesediaan
The available technical listings identify the CD4020BCN as a CMOS counter but do not state the requested compliance attributes. Its legacy through-hole construction does not by itself establish RoHS, REACH, halogen-free, or conflict-minerals status.