Texas Instruments

CD4051BMT - 8:1 CMOS Analog Multiplexer | Texas Instruments

MPN: CD4051BMT ✓ সক্রিয়
20 V Vdss 240 ohm Rds(on) 16-pin SOIC (D) Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

CD4051BMT সারাংশ

The Texas Instruments CD4051BMT is a single 8:1 CMOS analog multiplexer and demultiplexer with logic-level conversion, a 20 V maximum supply rating, one switched signal channel, and a 16-pin SOIC package. The three select inputs and inhibit input control which of eight analog terminals connects to the common terminal, allowing one PCB signal path to route multiple sources without physically moving the signal.

An analog multiplexer is a semiconductor switch that selects one input channel from several alternatives and connects it to a shared output. This 8:1 device belongs to the CD4000 CMOS logic family and is controlled by digital selection logic while carrying continuously varying analog signals. Its architecture makes it useful for channel selection, signal routing, test systems, data acquisition, and communication equipment where voltage, current, or impedance measurements must be directed selectively.

The CD4051BMT provides an 8:1 configuration, one analog channel, a 240 ohm nominal switch resistance as identified for this ordering variant, and 320 ns typical turn-on time. Its specified operating-temperature range is -55°C to +125°C, making it suitable for industrial and extended-temperature environments. The 16-SOIC package supports conventional surface-mount assembly while exposing separate supply and analog-signal terminals.

Its logic-level conversion capability allows address or command signals to be generated by digital control circuitry while the multiplexer routes the selected analog signal. The exact supported control-logic levels depend on the supply voltages applied to the device, so the selection inputs and inhibit input must be referenced to the correct supply domain. Charge injection, clock feedthrough, off-state leakage, bandwidth, and channel matching should be evaluated from the manufacturer datasheet for precision signal-chain designs.

Typical uses include routing multiple sensor inputs into one amplifier or ADC channel, sharing test equipment among several circuit nodes, selecting audio sources, controlling measurement paths, and implementing programmable signal-distribution systems. The extended temperature range and compact 16-pin package are useful in industrial instrumentation, though modern designs may require checking logic thresholds, signal bandwidth, and switching transients against the exact system requirements.

Designers should keep analog and digital return currents separated as far as practical, place decoupling close to the supply pins, and treat the inhibit and address inputs as ordinary CMOS logic rather than high-impedance analog nodes. Signal amplitude must remain within the device's permitted input and supply ranges. For ac applications, verify switching speed and off-state isolation before treating the multiplexer as a high-performance RF switch.

This product page combines the manufacturer and distributor specifications with practical routing, temperature, packaging, and replacement guidance. It also identifies where an existing design can use a pin-compatible 8:1 multiplexer and where supply-voltage, logic-level, or package differences require design review before substitution.

এর জন্য ড্রপ-ইন বিকল্প CD4051BMT — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible CD4051BMT (একই form factor এবং footprint).

SN74LV4051ADR

✅ ড্রপ-ইন
📦 SOIC-16
Maximum supply rating is 5 V versus 20 V for CD4051BMT, a 75% reduction; 8:1 architecture and one switched channel are unchanged

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

CD74HC4051E

✅ ড্রপ-ইন
📦 SOIC-16
Maximum supply rating is 5 V versus 20 V for CD4051BMT, a 75% reduction; 8:1 selection and 16-pin footprint remain compatible

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

HEF4051B

✅ ড্রপ-ইন
📦 SOIC-16
8:1 configuration and one switched channel have a 0% architectural difference; supply, timing, and logic-threshold differences require verification

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

CD4051BMT সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Multiplexer Configuration 8:1
Number of Switched Channels 1 channel
Maximum Supply Voltage 20 V
Nominal On Resistance 240 ohm
Listed On Resistance 1050 ohm
Turn-On Time 320 ns
Turn-Off Time 210 ns
অপারেটিং তাপমাত্রার পরিসর -55°C to +125°C
প্যাকেজ 16-pin SOIC (D)
মাউন্টিং টাইপ Surface mount
Select Inputs 3 binary select inputs
Inhibit Input 1 inhibit input
Logic-Level Conversion Supported
RoHS স্ট্যাটাস Unknown
REACH Status Unknown

CD4051BMT পিন কনফিগারেশন

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
পিন 1 IN4 — Analog input or output terminal 4
পিন 2 IN6 — Analog input or output terminal 6
পিন 3 IN5 — Analog input or output terminal 5
পিন 4 IN7 — Analog input or output terminal 7
পিন 5 VSS — Ground supply terminal
পিন 6 E — Inhibit input
পিন 7 IN3 — Analog input or output terminal 3
পিন 8 IN2 — Analog input or output terminal 2
পিন 9 IN1 — Analog input or output terminal 1
পিন 10 IN0 — Analog input or output terminal 0
পিন 11 OUT — Common analog output terminal
পিন 12 VDD — Positive supply terminal
পিন 13 A — Binary select input A
পিন 14 B — Binary select input B
পিন 15 C — Binary select input C
পিন 16 VEE — Negative supply terminal

সাধারণ ব্যবহার

CD4051BMT এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Multichannel Sensor Signal Routing, Data Acquisition Front End, Industrial Test-System Signal Selection, Audio Source Selection, Programmable Signal Distribution, Instrumentation and Control Panels.

🧩

Multichannel Sensor Signal Routing

The CD4051BMT is suitable for routing several analog sensor outputs into one shared amplifier or converter channel. Its three select inputs can control eight source choices, and the listed 320 ns turn-on and 210 ns turn-off times support measurement systems that do not require high-bandwidth video multiplexing. The 20 V supply capability also permits operation above common low-voltage logic rails when the signal amplitudes and control thresholds are checked. Use separate returns and controlled grounding to prevent sensor excitation currents from modulating the selected channel, and verify the datasheet limits before routing low-level thermocouple or bridge signals.

🖥️

Data Acquisition Front End

An 8:1 analog multiplexer can reduce the number of front-end input channels in a data-acquisition system by selecting one sensor at a time for a shared ADC path. The CD4051BMT provides the required 8:1 configuration, inhibit control, and 20 V maximum supply rating in a 16-pin SOIC package. Its -55°C to +125°C operating range supports extended-temperature acquisition equipment. Account for the 320 ns turn-on time during the acquisition settling interval and confirm bandwidth, charge injection, and off-state isolation against the measurement accuracy requirement.

🏭

Industrial Test-System Signal Selection

The CD4051BMT can connect multiple test nodes to a common measurement amplifier, allowing a compact fixture to sequence measurements without moving probes. Its 8:1 channel count reduces wiring complexity, while the inhibit input provides a convenient way to isolate the selected path during setup or reset. The extended -55°C to +125°C range is advantageous in industrial equipment, but the 240 ohm nominal on resistance may affect high-impedance sources. Use a low-input-impedance buffer when necessary and verify leakage, switching transients, and channel-to-channel behavior.

🎧

Audio Source Selection

The CD4051BMT can route one of eight audio-frequency sources to a shared output stage, making it useful in compact audio routing equipment. Its listed 320 ns and 210 ns switching transitions are much shorter than typical audio-band periods, while the 20 V supply rating offers flexibility in higher-voltage analog circuits. The 240 ohm nominal on resistance is acceptable for many line-level audio paths but can create loss with low-impedance loads. Confirm bandwidth, off-state isolation, distortion contribution, and click/noise behavior in the intended signal path before finalizing the design.

🌐

Programmable Signal Distribution

The CD4051BMT can act as a digitally addressed signal distributor when the multiplexer and demultiplexer functions are used in coordinated systems. Eight selectable analog terminals, three binary address inputs, and an inhibit control provide flexible routing controlled by standard digital logic. Its 16-pin SOIC package simplifies surface-mount assembly, while logic-level conversion supports interfacing with suitable control circuitry. Designers should establish valid input-output signal ranges, account for the 240 ohm nominal on resistance, and ensure that supply sequencing does not force undefined analog states onto externally connected equipment.

🔧

Instrumentation and Control Panels

The CD4051BMT is useful in instrumentation systems where multiple control or measurement lines must be selected before being applied to a shared actuator or indicator interface. Three address inputs and an inhibit function permit orderly routing and shutdown behavior, while the extended temperature range supports ruggedized equipment. The analog switch's on resistance and switching transient can affect the controlled signal, so buffer high-impedance or precision control nodes when required. Keep routing traces away from sensitive references and use the inhibit function to place outputs into a defined state during initialization.

What is the operating voltage of CD4051BMT?
The CD4051BMT supports operation up to a 20 V maximum supply rating. The Texas Instruments product page identifies it as a 20 V, 8:1, one-channel analog multiplexer, while the datasheet should be used to establish the complete input, output, supply, and control-voltage operating limits for the exact design. Control logic must also remain compatible with the supply level used for the address and inhibit functions.
What is the CD4051BMT pinout?
The CD4051BMT uses a standard 16-pin CD4051B arrangement: IN4, IN6, IN5, IN7, VSS, inhibit, IN3, IN2, IN1, IN0, OUT, VDD, A, B, C, and VEE from pin 1 through pin 16. Texas Instruments identifies the package as 16-pin SOIC. Use the manufacturer pin-description table when assigning PCB nets because the analog channels, supply terminals, and select controls must be connected exactly as shown.
Where can I download the CD4051BMT datasheet PDF?
The official CD4051BMT datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/cd4051b.pdf. It is the preferred document for checking the electrical characteristics, recommended operating conditions, truth table, pin configuration, and application information. The manufacturer's CD4051B product page also provides ordering data, quality information, and links to supporting technical documentation.
How does the CD4051BMT multiplexer work?
The CD4051BMT connects one of eight analog input terminals to the common OUT terminal. Three binary select inputs, A, B, and C, define the active channel, while the inhibit input provides an additional control function. According to the Texas Instruments datasheet, the device is a single 8-channel analog multiplexer or demultiplexer with logic-level conversion.
What are the key specifications of CD4051BMT that engineers should know?
The CD4051BMT is a 20 V, 8:1, one-channel CMOS analog multiplexer in a 16-pin SOIC package. Its listed operating range is -55°C to +125°C, with a nominal on resistance of 240 ohm for the ordering variant, 320 ns turn-on time, and 210 ns turn-off time. Texas Instruments also describes logic-level conversion, which helps simplify control from digital address circuitry.
What is the switching speed of CD4051BMT?
The CD4051BMT lists a turn-on time of 320 ns and a turn-off time of 210 ns. These values are given in the Texas Instruments CD4051B documentation and describe the switching transition of the selected analog path. For ac signals, engineers should also verify bandwidth, off-state isolation, charge injection, and clock feedthrough because transition time alone does not define total signal fidelity.
Is CD4051BMT suitable for industrial temperature ranges?
Yes, the CD4051BMT has an operating-temperature range of -55°C to +125°C according to the Texas Instruments product page. That range covers extended industrial environments and applications with substantial temperature variation. Board-level qualification should still consider the complete circuit, including capacitor behavior, connector stability, soldering, enclosure temperature rise, and the ratings of associated components.
What can replace the CD4051BMT?
A pin-compatible replacement must provide the same 8:1 channel arrangement, compatible 16-pin SOIC footprint, suitable logic thresholds, and acceptable signal and temperature ratings. SN74LV4051ADR and CD74HC4051E are potential 16-pin alternatives identified through 4051-family cross-reference information, but their lower-voltage supply operation differs from the CD4051BMT's 20 V rating. Verify every analog and logic parameter before substitution.
Is CD4051BMT the same as SN74LV4051ADR?
No, they are not identical despite both providing an 8:1 analog multiplexing function. The CD4051BMT supports a 20 V maximum supply rating and an operating range of -55°C to +125°C, while the SN74LV4051A belongs to a lower-voltage logic family. The TI comparison information identifies SN74LV4051A as an alternative for systems whose voltage does not exceed the LV family limits.
When should I choose CD4051BMT instead of SN74LV4051ADR?
Choose the CD4051BMT when the circuit requires a supply rating above the SN74LV4051A family's operating range or needs the broader CD4051B operating-temperature capability. According to Texas Instruments support information, SN74LV4051A is a strong low-noise alternative for lower-voltage designs. The correct choice depends on control thresholds, supply voltage, analog signal range, switching performance, and qualification requirements.
Can CD74HC4051E replace CD4051BMT?
CD74HC4051E can be considered for compatible 8:1 multiplexing circuits, but it is not an unconditional functional match. TI discussion material identifies the HC4051 family as operating up to 5 V, whereas CD4051BMT carries a 20 V maximum supply rating. A direct replacement is therefore appropriate only when the supply, logic thresholds, signal range, temperature requirements, and timing requirements remain within the HC part's limits.
What is the best HEF4051B equivalent for CD4051BMT?
HEF4051B is a functional 8:1 multiplexer alternative when its exact package, logic levels, supply rating, and temperature grade meet the circuit requirements. It should not be selected solely from the 4051 function label. Confirm the 16-lead footprint and pin assignment in the selected HEF4051B ordering variant, and compare its switching characteristics with the CD4051BMT values of 240 ohm nominal on resistance, 320 ns turn-on, and 210 ns turn-off.
Where can I buy CD4051BMT online?
Use the Request a Quote form on this page to request current CD4051BMT availability, commercial terms, and a formal quotation. The form provides a direct purchasing path without requiring you to rely on stale market listings. Confirm the exact 16-pin SOIC ordering variant, reel or other packing requirement, quantity, and target delivery location when submitting the request.
What is the price of CD4051BMT?
Use the Request a Quote form on this page for the current CD4051BMT price. The quote can be tied to the required quantity, package form, reel configuration, and delivery destination, producing commercial terms appropriate for the order. Prices change with quantity, supply, and market conditions, so a request-based quotation is more reliable than reproducing a transient marketplace figure on a technical product page.
What is the lead time and stock status for CD4051BMT?
Request the current lead time and stock status through the Request a Quote form on this page. Include the required quantity, shipment date, and whether the units must arrive in a specific reel or packing format. Because availability can change rapidly, the purchasing response should be treated as the commitment for the requested quantity and schedule.
How should the CD4051BMT be used in a signal-routing circuit?
Connect the eight analog terminals to the desired sources, route the selected signal through the common OUT terminal, and drive A, B, and C according to the channel-selection truth table. Place supply decoupling near VDD and VSS, keep control traces away from sensitive analog routing, and respect the input, output, and supply limits in the Texas Instruments datasheet. The inhibit function can disable the selected path during reset or measurement transitions.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা CD4051BMT — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose CD4051BMT when a design needs an 8:1 CMOS analog multiplexer with a 20 V maximum supply rating, a -55°C to +125°C operating range, and a standard 16-pin SOIC footprint. SN74LV4051ADR is appropriate when the circuit operates within the LV family's 5 V limit and low-noise logic characteristics are preferred. CD74HC4051E is suitable for 5 V HC-family systems after confirming switching speed, on resistance, and logic thresholds. HEF4051B is a functional alternative when its exact ordering variant matches the footprint and its supply, timing, leakage, and temperature characteristics satisfy the application. In every substitution, verify pin assignments, inhibit polarity, control thresholds, analog signal limits, and package orientation rather than relying only on the 4051 function designation.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য SN74LV4051ADR CD74HC4051E HEF4051B
Package SOIC-16 SOIC-16 SOIC-16 SOIC-16
Brand Texas Instruments Texas Instruments Texas Instruments NXP Semiconductors
Multiplexer Configuration 8:1 8:1 8:1 8:1

মূল পার্থক্যসমূহ

  • Higher maximum supply rating (বনামSN74LV4051ADR)
  • Extended-temperature CD4051B platform (বনামCD74HC4051E)
  • One-to-one 8:1 channel routing (বনামHEF4051B)

ডিজাইন নোট

Route the eight analog terminals and OUT as a compact, symmetrical signal network, and keep the three select traces away from high-impedance analog nodes. Place the supply-decoupling capacitor close to VDD with a short return path to VSS. Because the CD4051BMT is a CMOS analog switch, minimize parasitic capacitance on the selected channel and use a ground strategy that prevents input current from sharing the sensitive return path.

Do not treat the eight terminal names as permanently designated inputs or outputs; the multiplexer and demultiplexer functions depend on how the circuit is connected. Also do not assume that a 5 V logic-family substitute is equivalent in a 20 V circuit. Verify supply ratings, control thresholds, analog signal limits, inhibit polarity, and the selected package pinout before replacing CD4051BMT with SN74LV4051ADR, CD74HC4051E, or HEF4051B.

Allow the downstream acquisition or measurement circuit to settle after the 320 ns turn-on transition before taking a reading. For low-level or high-impedance signals, the listed 240 ohm nominal on resistance and unverified off-state leakage may dominate the error budget. Check bandwidth, charge injection, clock feedthrough, and isolation in the manufacturer datasheet, and use a buffer when the source impedance is high.

Decouple the supply pins locally and control the inhibit input during power-up so that externally connected signals do not receive an unintended transition. Observe the permitted signal and supply ranges for the selected operating mode. If VEE is connected, establish the negative rail reference correctly and confirm that every attached source remains within the permitted input range; the device must never be assumed to tolerate signals outside its supply-domain limits.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No explicit compliance declarations were identified for this ordering variant. AEC-Q100 status is not applicable to the stated industrial and extended-temperature product category rather than a confirmed qualification.

ডেটা যাচাই করা হয়েছে: 2026-11-10 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

cd4051bm datasheet cd4051bm pdf CD4051BMT datasheet CD4051BMT pinout CD4051BMT SOIC-16 CD4051BMT 8:1 analog multiplexer CD4051BMT 20V multiplexer Texas Instruments CD4051BMT CD4051BMT equivalent CD4051BMT replacement CD4051BMT vs SN74LV4051ADR CD4051BMT price CD4051BMT stock CD4051BMT signal routing application

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments CD4051BMT CD4051B SN74LV4051ADR CD74HC4051E HEF4051B analog multiplexer analog demultiplexer analog switch CD4000 CMOS logic family CMOS logic-level conversion 8:1 multiplexing SOIC-16 surface mount SMD 20 V power rating 240 ohm on resistance 320 ns turn-on time 210 ns turn-off time -55°C to +125°C operating range binary select input inhibit input analog signal routing
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন