Harris Corporation

CD4060AK3 - 14-Stage CMOS Counter | Harris Corporation

MPN: CD4060AK3 ✗ জীবনকালের সমাপ্তি
DFP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

CD4060AK3 সারাংশ

Harris Corporation CD4060AK3 is a 14-stage CMOS ripple-carry binary counter and divider with an integrated oscillator, supplied in a 16-terminal flat DFP package. The device counts in an upward direction and provides the counter and oscillator functions required for frequency division, timing generation, and periodic event generation. Its military temperature grade, asynchronous counting architecture, and 16-terminal ceramic package identify it as a legacy logic device intended for demanding timing and control systems.

A binary counter is a sequential digital-logic component that stores a binary value and advances that value when it receives a clock edge. A ripple-carry counter uses the output of one stage to trigger the next stage. The CD4060 family combines this counter function with an oscillator, allowing an external timing resistor and capacitor to establish a base frequency that can be divided into lower-frequency outputs. Within the logic hierarchy, it is a counter/divider, then a logic IC, then an integrated circuit used for timing and control.

The CD4060AK3 provides 14 counter stages, asynchronous up-counting, and a CMOS implementation. Its oscillator-capable architecture reduces the number of separate timing components required for divider and pulse-generation circuits. The 16-terminal DFP package also supports board-level procurement for legacy industrial, aerospace, and defense programs where an older package and qualification history may be necessary. Exact voltage limits, operating-current limits, propagation-delay limits, and output-drive characteristics should be taken from the manufacturer datasheet before final circuit release.

Timing design must account for accumulated ripple delay across the selected counter stages. The oscillator frequency depends on the external resistance and capacitance, while each counter output advances only after preceding stages have propagated. This makes CD4060AK3 appropriate for low-to-medium-frequency division and periodic control rather than applications requiring zero-delay clocking or high-speed synchronous feedback. The unused counter outputs should be left unconnected, and all supply and ground pins must be connected according to the package pinout.

Typical uses include industrial timer modules, instrumentation clock dividers, laboratory pulse generators, event-counting systems, and legacy control logic. In these applications, the device can create one or more divided timing signals from a single oscillator network, reducing sequential logic and allowing one timing source to serve several slower functions. The inherited ripple characteristic also means that output transitions are not simultaneous, so downstream circuitry should trigger from one designated stage rather than combining multiple outputs.

For PCB construction, verify the land pattern for the 16-terminal DFP package and preserve the manufacturer-specified ceramic-capacitor footprint around the oscillator pins. Keep the oscillator timing loop compact and route it away from high-current switching nodes. Check supply sequencing, unused-pin treatment, and maximum operating voltage against the device qualification document. This page combines the exact CD4060AK3 package and catalog facts with practical oscillator, timing, and layout guidance to support legacy-design review and sourcing decisions.

এর জন্য ড্রপ-ইন বিকল্প CD4060AK3 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।

বিকল্প অনুরোধ করুন

CD4060AK3 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Counter Type Binary counter
Counting Direction Up
Counting Mode Asynchronous
Logic Technology CMOS
Number of Counter Stages 14 stages
Divider Architecture Ripple-carry
Integrated Oscillator Yes
Temperature Grade Military
Terminal Count 16 terminals
Package Code DFP
Package Form Flat
Package Shape Rectangular
মাউন্টিং টাইপ Surface mount

CD4060AK3 rectangular পিন কনফিগারেশন গাইড

CD4060AK3 (rectangular প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

CD4060AK3-এর জন্য rectangular প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি CD4060AK3.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

CD4060AK3 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Timer Modules, Pulse and Frequency Divider Circuits, Laboratory and Instrumentation Timing, Event Counting and Sequence Control, Legacy Control Logic and Retrofits, Aerospace and Defense Support Systems.

🏭

Industrial Timer Modules

The CD4060AK3 fits industrial timer modules that need a self-contained counter and oscillator rather than a separate clock generator. Its 14 counter stages can divide one base waveform into multiple slower timing signals, reducing the amount of external sequential logic required. The principal design consideration is ripple delay: outputs change at different instants, so the timer should trigger from one defined stage rather than several outputs. The 16-terminal DFP package must match the legacy controller board, while the oscillator resistor and capacitor should be positioned close to their assigned pins to limit pickup and timing variation.

⚡

Pulse and Frequency Divider Circuits

CD4060AK3 is appropriate for pulse-generation and frequency-divider circuits because its asynchronous stages provide binary division ratios from one base frequency. The 14-stage architecture allows a design to select a lower-frequency output without adding a separate divider IC. Engineers should calculate the expected accumulation of stage propagation delay, especially when the divided signal controls a narrow pulse window, and verify the maximum frequency from the manufacturer timing characteristics. Reset behavior and power-up states must also be controlled so that downstream machinery does not interpret an uncontrolled counter output as a valid timing event.

🖥️

Laboratory and Instrumentation Timing

In laboratory and instrumentation timing systems, the CD4060AK3 can create repeatable divided timing references for relays, sampling controls, and status indicators. The integrated oscillator simplifies the analog timing network, while multiple counter stages allow different slow rates to be selected without separate binary counters. Because this is a ripple counter, the outputs are not edge-coincident; triggering one stage at a time prevents ambiguity in synchronized instrumentation. The military-grade DFP package is useful for maintaining continuity with legacy test equipment, but the circuit still requires review for supply levels, oscillator component tolerances, and operation across the intended temperature range.

🔧

Event Counting and Sequence Control

The CD4060AK3 can support event-counting and sequence-control functions in legacy control panels where an input pulse advances a binary state and selected outputs trigger subsequent actions. Its upward asynchronous counting and 14-stage depth offer a straightforward way to divide repetitive events into longer intervals. A reset path is important for repeatable equipment cycles, and software or discrete logic should not assume that every count transition occurs at the same instant. The flat DFP package preserves compatibility with older control boards, but new layouts should follow the package drawing exactly rather than substituting a visually similar 16-pin plastic package.

🛠️

Legacy Control Logic and Retrofits

CD4060AK3 is especially relevant to legacy control-logic retrofits where the existing board uses a 16-terminal DFP footprint and requires the original military-grade counter/divider. Installing a modern package without corresponding pin verification can create supply, output-level, or timing incompatibilities. The safest retrofit is an exact-ordering-code replacement supported by a manufacturer cross-reference and validated against the target voltage and temperature conditions. During inspection, check oscillator capacitors, reset conditioning, and previous counter outputs for leakage paths, because aging external components can change timing even when the counter IC itself remains functional.

✈️

Aerospace and Defense Support Systems

The military-grade CD4060AK3 can be evaluated for aerospace, defense-support, and other legacy acquisition programs that already specify the 16-terminal DFP device. Its 14-stage asynchronous counter and integrated oscillator support compact timing and division functions where board area is constrained. Qualification status, operating temperature, radiation requirements, and screening criteria must be confirmed for the exact ordering code; the generic catalog description alone does not establish every compliance requirement. Designers should also allow for the legacy package's board-level thermal and mechanical constraints and maintain adequate bypass routing around the supply terminals.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

CD4060 CD4060 counter and oscillator family ব্যবহৃত হয়: Industrial Timer Modules, Pulse and Frequency Divider Circuits, Laboratory and Instrumentation Timing, Event Counting and Sequence Control, Aerospace and Defense Support Systems CD4060AK CD4060 ripple-counter family variant ব্যবহৃত হয়: Industrial Timer Modules, Laboratory and Instrumentation Timing, Legacy Control Logic and Retrofits CD4060AK3 Harris Corporation ব্যবহৃত হয়: Pulse and Frequency Divider Circuits, Event Counting and Sequence Control, Legacy Control Logic and Retrofits, Aerospace and Defense Support Systems
What is the CD4060AK3?
The Harris Corporation CD4060AK3 is a 14-stage CMOS ripple-carry binary counter and divider with an integrated oscillator. It counts upward in an asynchronous manner and is packaged in a 16-terminal flat DFP package. According to the Harris CD4060AK3 datasheet, the device combines binary counting, frequency division, and oscillator functions for timing and control applications.
How many counter stages does the CD4060AK3 have?
The CD4060AK3 contains 14 counter stages and operates as an asynchronous ripple-carry binary counter. Each completed stage produces a divided version of the oscillator or clock waveform, with division ratios increasing through the chain. According to the manufacturer datasheet, the upward counting direction and 14-stage organization make it suitable for deriving multiple slower timing signals from one source.
What package does the CD4060AK3 use?
The CD4060AK3 uses a 16-terminal flat DFP package with a rectangular package shape. The catalog description identifies it as a military-grade Harris device intended for surface-mount assembly. Verify the exact land pattern and terminal orientation against the manufacturer pinout before fabrication because the 16-terminal DFP outline must not be confused with a 16-pin SOIC or TSSOP footprint.
Where can I download the CD4060AK3 datasheet PDF?
The CD4060AK3 datasheet PDF is available through the linked LCSC document and the CD4060 family documents listed by Harris and Texas Instruments. The document covers the counter and oscillator implementation, terminal assignments, operating limits, and timing characteristics. Use the package-specific pin description when assigning PCB tracks because alternate CD4060 package variants can use a different number of terminals.
Where can I find the CD4060AK3 pinout?
The CD4060AK3 pinout is shown in the manufacturer datasheet as a 16-terminal DFP connection diagram. Use that diagram for supply, ground, oscillator, clock, reset, and divided-output assignments. Because the exact terminal names are not printed on the catalog result, consult the original Harris CD4060AK3 datasheet rather than adapting a pinout from a different CD4060 package.
What is the operating voltage of the CD4060AK3?
The CD4060AK3 operating voltage must be confirmed from the Harris CD4060AK3 datasheet before connecting the device to a supply rail. The verified catalog material identifies a military-grade CMOS counter with 16 terminals but does not print a voltage range. Verify the absolute maximum supply voltage, recommended operating range, input thresholds, and output levels against the original manufacturer document.
Can the CD4060AK3 operate as a divider?
Yes, the CD4060AK3 can operate as a frequency divider because its 14 stages provide progressively divided binary outputs. An external resistor-capacitor network can set the oscillator base frequency when the oscillator inputs are used, while the selected counter stage determines the resulting division ratio. Account for ripple propagation delay and choose one defined trigger stage in downstream logic.
What clock frequency should the CD4060AK3 use?
The appropriate clock or oscillator frequency for the CD4060AK3 depends on the supply voltage, temperature, propagation delay, and required output accuracy. The manufacturer datasheet defines the device as a 14-stage CMOS ripple-carry counter, but the catalog excerpt does not state a maximum operating frequency. Use the timing characteristics in the original datasheet and leave timing margin for the longest counter chain used.
What can replace the CD4060AK3?
A valid CD4060AK3 replacement must use the same 16-terminal DFP footprint, match the 14-stage counter and oscillator functions, and satisfy the original electrical and timing limits. No distinct drop-in replacement was established by the available cross-reference results, so an unverified package substitution is not recommended. Use the Request a Quote form on this page to request sourcing support for the exact MPN and legacy-package alternatives.
Is CD4060AK3 the same as CD4060AK?
No, the CD4060AK and CD4060AK3 are not automatically interchangeable because their package and ordering details differ. CD4060AK is identified as a 14-stage and 12-stage ripple-carry counter family member, while CD4060AK3 is specifically a 16-terminal flat DFP military-grade device. Confirm the terminal count, footprint, temperature grade, and timing requirements before considering any family substitution.
When should I choose the CD4060AK3 over another CD4060 variant?
Choose the CD4060AK3 when a legacy design specifically requires a 14-stage asynchronous CMOS counter/divider in a 16-terminal military-grade DFP package. Select another family variant when the board uses a different package, temperature range, pin count, or lifecycle requirement. The exact package and qualification history should take priority over nominal counter-stage similarity during replacement planning.
Is the CD4060AK3 suitable for industrial timer and pulse-generation circuits?
The CD4060AK3 is suitable for industrial timer, pulse-generation, and low-to-medium-frequency divider circuits when the original voltage, timing, and temperature limits are acceptable. Its 14 ripple stages can produce multiple divided outputs from one oscillator network. Avoid using it as a high-speed synchronous clock because accumulated stage delay can create skew between outputs.
What are the key specifications of CD4060AK3 that engineers should know?
The key CD4060AK3 specifications are a 14-stage binary counter, asynchronous ripple-carry operation, up counting, CMOS logic, an integrated oscillator, military temperature grade, and a 16-terminal flat DFP package. These characteristics place it in the logic-IC timing-and-control category. Supply limits, propagation delay, oscillator frequency limits, and output-drive data require confirmation from the manufacturer datasheet.
Where can I buy CD4060AK3?
Use the Request a Quote form on this page to request CD4060AK3 availability, MOQ, and current lead time for the exact 16-terminal DFP ordering code. The device is a legacy military-grade part, and a package or grade mismatch can prevent drop-in use. Provide the target board revision and required environmental or qualification requirements with the inquiry.
How much does the CD4060AK3 cost?
Use the Request a Quote form on this page for the current CD4060AK3 price and quantity availability. The structured listing price is maintained separately and can change with market conditions, quantity, and sourcing status. For a legacy military-grade part, obtain a quote for the exact MPN rather than assuming that a generic CD4060 price applies.
What is the lead time and stock status of CD4060AK3?
The current CD4060AK3 stock status and lead time should be requested through the Request a Quote form on this page. Legacy counter IC availability can vary by lot, package, and screening requirement, so the form should specify quantity, date code needs, target grade, and whether factory-sealed packaging is required.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা CD4060AK3 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose CD4060AK3 when maintaining a legacy board that specifically requires a 14-stage asynchronous CMOS counter/divider in a 16-terminal military-grade flat DFP package. Its integrated oscillator and multiple divided outputs suit timers, pulse generation, event counting, and instrumentation timing where ripple delay is acceptable. Do not substitute a generic CD4060 variant merely because its counter depth matches: terminal count, package outline, electrical limits, temperature grade, reset behavior, and timing characteristics must all be verified. No distinct drop-in replacement was established by the available cross-reference results, so the exact ordering code is the defensible choice for production continuity. If a new design does not inherit legacy package or qualification constraints, compare modern counter and oscillator ICs on operating voltage, maximum frequency, timing accuracy, lifecycle status, and available package options rather than treating them as board-level drop-ins.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য
Counter Type Binary counter
Number of Stages 14 stages
Counting Mode Asynchronous ripple carry
Counting Direction Up
Logic Technology CMOS
Integrated Oscillator Yes
Temperature Grade Military
Package 16-terminal flat DFP
Brand Harris Corporation

মূল পার্থক্যসমূহ

  • Combines a 14-stage counter with an integrated oscillator (বনামGeneric discrete binary-counter stages)
  • Military-grade ordering option (বনামConsumer-grade CD4060 package variants)
  • Legacy flat-package continuity (বনামModern SOIC or TSSOP CD4060 implementations)

ডিজাইন নোট

Route the CD4060AK3 oscillator network as a compact loop between its assigned terminals and the timing capacitor, keeping it away from switching nodes and high-current return paths. Place any oscillator resistor and capacitor close to the device according to the manufacturer application diagram. For a 16-terminal flat DFP package, verify the mechanical drawing and terminal numbering rather than deriving the footprint from a generic 16-pin DIP or SOIC outline.

Treat ripple propagation across multiple stages as a design constraint. A divided output is produced after earlier stages have transitioned, so outputs from different stages do not change simultaneously. Trigger downstream circuitry from one selected stage whenever deterministic timing is required, and include sufficient timing margin for the longest divider chain. Verify the selected stage frequency and reset recovery behavior against the manufacturer timing characteristics before closing the timing budget.

Confirm the recommended supply range, input thresholds, and output levels from the original CD4060AK3 datasheet before connecting it to surrounding logic. Place the required bypass capacitor adjacent to the supply and ground terminals, and confirm that every supply and ground connection is made in the 16-terminal package. Avoid driving the oscillator input or counter inputs from signals that exceed the device's specified input range.

Do not substitute a generic CD4060 solely because its counter-stage count matches. A valid replacement must reproduce the 16-terminal DFP footprint, terminal assignments, counter and oscillator behavior, military temperature grade, and applicable voltage and timing limits. Also account for external oscillator-component tolerances and aging, which can shift the operating frequency even when the counter itself is functioning correctly.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The catalog result identifies a military-grade legacy counter, but it does not provide RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations.

ডেটা যাচাই করা হয়েছে: 2026-11-19 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

CD4060AK3 datasheet CD4060AK3 datasheet pdf CD4060AK3 pinout CD4060AK3 equivalent CD4060AK3 replacement CD4060AK3 cross reference CD4060AK3 schematic CD4060AK3 footprint CD4060AK3 price CD4060AK3 stock Harris CD4060AK3 CD4060AK3 14 stage counter CD4060AK3 16 pin DFP CD4060AK3 oscillator divider CD4060AK3 vs CD4060AK

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Harris Corporation CD4060AK3 CD4060AK CD4060 binary counter ripple-carry counter counter divider frequency divider CMOS integrated oscillator asynchronous counter 14-stage counter logic IC timing IC 16-terminal DFP military grade up counter oscillator timing network propagation delay divided output industrial timer pulse generator aerospace and defense support systems
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন