CD4060AK3 - 14-Stage CMOS Counter | Harris Corporation
MPN: CD4060AK3 ✗ Akhir HayatCD4060AK3 Ringkasan
A binary counter is a sequential digital-logic component that stores a binary value and advances that value when it receives a clock edge. A ripple-carry counter uses the output of one stage to trigger the next stage. The CD4060 family combines this counter function with an oscillator, allowing an external timing resistor and capacitor to establish a base frequency that can be divided into lower-frequency outputs. Within the logic hierarchy, it is a counter/divider, then a logic IC, then an integrated circuit used for timing and control.
The CD4060AK3 provides 14 counter stages, asynchronous up-counting, and a CMOS implementation. Its oscillator-capable architecture reduces the number of separate timing components required for divider and pulse-generation circuits. The 16-terminal DFP package also supports board-level procurement for legacy industrial, aerospace, and defense programs where an older package and qualification history may be necessary. Exact voltage limits, operating-current limits, propagation-delay limits, and output-drive characteristics should be taken from the manufacturer datasheet before final circuit release.
Timing design must account for accumulated ripple delay across the selected counter stages. The oscillator frequency depends on the external resistance and capacitance, while each counter output advances only after preceding stages have propagated. This makes CD4060AK3 appropriate for low-to-medium-frequency division and periodic control rather than applications requiring zero-delay clocking or high-speed synchronous feedback. The unused counter outputs should be left unconnected, and all supply and ground pins must be connected according to the package pinout.
Typical uses include industrial timer modules, instrumentation clock dividers, laboratory pulse generators, event-counting systems, and legacy control logic. In these applications, the device can create one or more divided timing signals from a single oscillator network, reducing sequential logic and allowing one timing source to serve several slower functions. The inherited ripple characteristic also means that output transitions are not simultaneous, so downstream circuitry should trigger from one designated stage rather than combining multiple outputs.
For PCB construction, verify the land pattern for the 16-terminal DFP package and preserve the manufacturer-specified ceramic-capacitor footprint around the oscillator pins. Keep the oscillator timing loop compact and route it away from high-current switching nodes. Check supply sequencing, unused-pin treatment, and maximum operating voltage against the device qualification document. This page combines the exact CD4060AK3 package and catalog facts with practical oscillator, timing, and layout guidance to support legacy-design review and sourcing decisions.
Pilihan pengganti yang segera untuk CD4060AK3 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Tiada pilihan pengganti yang segera untuk produk ini.
Minta AlternatifCD4060AK3 Penilaian maksimum & Ciri-ciri Elektrik
| Counter Type | Binary counter |
| Counting Direction | Up |
| Counting Mode | Asynchronous |
| Logic Technology | CMOS |
| Number of Counter Stages | 14 stages |
| Divider Architecture | Ripple-carry |
| Integrated Oscillator | Yes |
| Temperature Grade | Military |
| Terminal Count | 16 terminals |
| Package Code | DFP |
| Package Form | Flat |
| Package Shape | Rectangular |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin CD4060AK3 rectangular
Konfigurasi pin untuk CD4060AK3 (rectangular pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk CD4060AK3.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
CD4060AK3 patut untuk 6 aplikasis: Industrial Timer Modules, Pulse and Frequency Divider Circuits, Laboratory and Instrumentation Timing, Event Counting and Sequence Control, Legacy Control Logic and Retrofits, Aerospace and Defense Support Systems.
Industrial Timer Modules
The CD4060AK3 fits industrial timer modules that need a self-contained counter and oscillator rather than a separate clock generator. Its 14 counter stages can divide one base waveform into multiple slower timing signals, reducing the amount of external sequential logic required. The principal design consideration is ripple delay: outputs change at different instants, so the timer should trigger from one defined stage rather than several outputs. The 16-terminal DFP package must match the legacy controller board, while the oscillator resistor and capacitor should be positioned close to their assigned pins to limit pickup and timing variation.
Disebarkan
Pulse and Frequency Divider Circuits
CD4060AK3 is appropriate for pulse-generation and frequency-divider circuits because its asynchronous stages provide binary division ratios from one base frequency. The 14-stage architecture allows a design to select a lower-frequency output without adding a separate divider IC. Engineers should calculate the expected accumulation of stage propagation delay, especially when the divided signal controls a narrow pulse window, and verify the maximum frequency from the manufacturer timing characteristics. Reset behavior and power-up states must also be controlled so that downstream machinery does not interpret an uncontrolled counter output as a valid timing event.
Disebarkan
Laboratory and Instrumentation Timing
In laboratory and instrumentation timing systems, the CD4060AK3 can create repeatable divided timing references for relays, sampling controls, and status indicators. The integrated oscillator simplifies the analog timing network, while multiple counter stages allow different slow rates to be selected without separate binary counters. Because this is a ripple counter, the outputs are not edge-coincident; triggering one stage at a time prevents ambiguity in synchronized instrumentation. The military-grade DFP package is useful for maintaining continuity with legacy test equipment, but the circuit still requires review for supply levels, oscillator component tolerances, and operation across the intended temperature range.
Disebarkan
Event Counting and Sequence Control
The CD4060AK3 can support event-counting and sequence-control functions in legacy control panels where an input pulse advances a binary state and selected outputs trigger subsequent actions. Its upward asynchronous counting and 14-stage depth offer a straightforward way to divide repetitive events into longer intervals. A reset path is important for repeatable equipment cycles, and software or discrete logic should not assume that every count transition occurs at the same instant. The flat DFP package preserves compatibility with older control boards, but new layouts should follow the package drawing exactly rather than substituting a visually similar 16-pin plastic package.
Disebarkan
Legacy Control Logic and Retrofits
CD4060AK3 is especially relevant to legacy control-logic retrofits where the existing board uses a 16-terminal DFP footprint and requires the original military-grade counter/divider. Installing a modern package without corresponding pin verification can create supply, output-level, or timing incompatibilities. The safest retrofit is an exact-ordering-code replacement supported by a manufacturer cross-reference and validated against the target voltage and temperature conditions. During inspection, check oscillator capacitors, reset conditioning, and previous counter outputs for leakage paths, because aging external components can change timing even when the counter IC itself remains functional.
Disebarkan
Aerospace and Defense Support Systems
The military-grade CD4060AK3 can be evaluated for aerospace, defense-support, and other legacy acquisition programs that already specify the 16-terminal DFP device. Its 14-stage asynchronous counter and integrated oscillator support compact timing and division functions where board area is constrained. Qualification status, operating temperature, radiation requirements, and screening criteria must be confirmed for the exact ordering code; the generic catalog description alone does not establish every compliance requirement. Designers should also allow for the legacy package's board-level thermal and mechanical constraints and maintain adequate bypass routing around the supply terminals.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk CD4060AK3 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini |
|---|---|
| Counter Type | Binary counter |
| Number of Stages | 14 stages |
| Counting Mode | Asynchronous ripple carry |
| Counting Direction | Up |
| Logic Technology | CMOS |
| Integrated Oscillator | Yes |
| Temperature Grade | Military |
| Package | 16-terminal flat DFP |
| Brand | Harris Corporation |
Penyeberangsung Jelas
- Combines a 14-stage counter with an integrated oscillator (vsGeneric discrete binary-counter stages)
- Military-grade ordering option (vsConsumer-grade CD4060 package variants)
- Legacy flat-package continuity (vsModern SOIC or TSSOP CD4060 implementations)
Catatan Desain
Route the CD4060AK3 oscillator network as a compact loop between its assigned terminals and the timing capacitor, keeping it away from switching nodes and high-current return paths. Place any oscillator resistor and capacitor close to the device according to the manufacturer application diagram. For a 16-terminal flat DFP package, verify the mechanical drawing and terminal numbering rather than deriving the footprint from a generic 16-pin DIP or SOIC outline.
Treat ripple propagation across multiple stages as a design constraint. A divided output is produced after earlier stages have transitioned, so outputs from different stages do not change simultaneously. Trigger downstream circuitry from one selected stage whenever deterministic timing is required, and include sufficient timing margin for the longest divider chain. Verify the selected stage frequency and reset recovery behavior against the manufacturer timing characteristics before closing the timing budget.
Confirm the recommended supply range, input thresholds, and output levels from the original CD4060AK3 datasheet before connecting it to surrounding logic. Place the required bypass capacitor adjacent to the supply and ground terminals, and confirm that every supply and ground connection is made in the 16-terminal package. Avoid driving the oscillator input or counter inputs from signals that exceed the device's specified input range.
Do not substitute a generic CD4060 solely because its counter-stage count matches. A valid replacement must reproduce the 16-terminal DFP footprint, terminal assignments, counter and oscillator behavior, military temperature grade, and applicable voltage and timing limits. Also account for external oscillator-component tolerances and aging, which can shift the operating frequency even when the counter itself is functioning correctly.
Maklumat Kesediaan
The catalog result identifies a military-grade legacy counter, but it does not provide RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations.