CS4353-CNZ - 24-Bit Stereo DAC with 2 VRMS Output
MPN: CS4353-CNZ ✓ সক্রিয়CS4353-CNZ সারাংশ
A stereo DAC converts digital audio samples into an analog voltage suitable for line-level amplification. The CS4353 belongs to the broader digital-to-analog converter hierarchy within audio converter ICs and signal-chain semiconductors. Its integrated architecture reduces the number of external analog components required when driving a conventional audio input stage compared with a converter that outputs only a lower-level reference signal.
The converter uses a fifth-order multi-bit delta-sigma digital-to-analog architecture. Other integrated functions include digital interpolation, digital de-emphasis, analog filtering, and an on-chip 2 VRMS line-level driver. The specified 24-bit resolution and 192 kHz sampling capability support high-resolution consumer and professional audio formats, including 44.1 kHz, 48 kHz, 96 kHz, and 192 kHz streams when the upstream digital audio interface supplies them.
The CS4353-CNZ accepts I2S-format digital audio and operates from a 3.3 V analog and digital supply architecture. Its reported digital supply range of 0.85 V to 3.47 V provides information about the internal digital operating domain, while the line-output stage is designed for 2 VRMS output. The 24-QFN package supports compact surface-mount layouts but requires careful exposed-pad soldering and thermal design.
Typical applications include stereo hi-fi playback, powered speakers, headphones with external amplification, AV receivers, game consoles, digital mixing consoles, and USB or network audio interfaces. The integrated line driver is particularly useful when the system requires a balanced architecture outside the DAC or when designing a compact analog output stage.
The most important layout consideration is separating sensitive analog outputs from noisy digital and switching circuitry while keeping the exposed thermal pad properly connected to the ground plane. Place input and output decoupling capacitors close to their associated pins, follow the recommended footprint, and verify the exposed-pad soldering process for the 24-QFN package.
This page combines the manufacturer-defined converter functions, exact package and operating information, procurement guidance, replacement analysis, comparison parameters, and implementation-focused design notes to support both component selection and first-board bring-up.
এর জন্য ড্রপ-ইন বিকল্প CS4353-CNZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible CS4353-CNZ (একই form factor এবং footprint) — পার্থক্য রয়েছে Package.
CS4353-DNZ
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →CS4353-CNZ সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | Stereo audio digital-to-analog converter IC |
| রেজোলিউশন | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Number of Audio Channels | 2 channels |
| Digital Audio Interface | I2S |
| Converter Architecture | Fifth-order multi-bit delta-sigma |
| Analog Line Output | 2 VRMS |
| Nominal Supply Voltage | 3.3 V |
| Digital Supply Range | 0.85 V to 3.47 V |
| Integrated Functions | Digital interpolation, digital de-emphasis, analog filtering, and line-level output driver |
| প্যাকেজ | 24-QFN (4 x 4 mm) |
| মাউন্টিং টাইপ | Surface mount |
| অপারেটিং তাপমাত্রা | -40 °C to +85 °C |
| Exposed Thermal Pad | Yes |
| RoHS স্ট্যাটাস | Unknown |
| REACH Status | Unknown |
| AEC-Q100 Qualification | Not applicable |
CS4353-CNZ 24-qfn (4 x 4 mm) পিন কনফিগারেশন গাইড
CS4353-CNZ (24-qfn (4 x 4 mm) প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি CS4353-CNZ.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
CS4353-CNZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Compact Hi-Fi Stereo DAC, Powered Speaker Interface, Headphone and Line-Level Output, Digital Mixing Console Output, USB and Network Audio Interface, AV Receiver and Home Theater Output.
Compact Hi-Fi Stereo DAC
The CS4353-CNZ fits a compact stereo hi-fi output stage because it combines 24-bit conversion, operation up to 192 kHz, and an integrated 2 VRMS line driver in a 24-QFN 4 x 4 mm package. It can receive I2S streams directly from a digital audio transport and pass the converted analog signal to a downstream power amplifier. Using the onboard filtering and line driver reduces the number of discrete conversion and output stages required. The implementation must still preserve a quiet analog supply, short output traces, controlled ground returns, and adequate exposed-pad soldering to preserve low-noise performance.
সুপারিশকৃত
Powered Speaker Interface
The CS4353-CNZ is suitable for the digital front end of a powered stereo speaker because its 2 VRMS line-level outputs can feed an external power amplifier. The converter accepts 24-bit I2S audio and supports sample rates up to 192 kHz, allowing the speaker system to retain high-resolution source fidelity. A practical design places the DAC close to the output amplifier input and keeps the analog path away from switching regulators and digital clocks. The line-level output should still be checked against amplifier gain, input impedance, coupling requirements, and protection limits for the selected speaker topology.
সুপারিশকৃত
Headphone and Line-Level Output
The CS4353-CNZ can provide a low-level analog source for a headphone amplifier when 2 VRMS line output is appropriate for the following stage. Its integrated analog filtering and line driver reduce the external circuitry needed between the I2S interface and the amplifier, while 24-bit resolution and 192 kHz operation preserve high-resolution source capability. Designers should avoid treating the DAC output as a direct high-current headphone drive stage and should use a dedicated amplifier with the required impedance and current capability. Short output routing, quiet supply rails, and a clean analog ground reference remain essential.
সুপারিশকৃত
Digital Mixing Console Output
The CS4353-CNZ can serve as the final stereo conversion stage in a digital mixing console or digital audio mixer because it accepts I2S input and supports 24-bit audio at rates up to 192 kHz. The integrated fifth-order multi-bit delta-sigma converter and analog filter provide a direct route from the mixer’s digital bus to a 2 VRMS line output. This is useful when multiple channels are already mixed and only one stereo master output is required. The physical design should isolate the DAC and its output network from high-current amplifier channels, use short ground returns, and provide local supply bypassing at the device pins.
সুপারিশকৃত
USB and Network Audio Interface
The CS4353-CNZ fits a USB or network audio interface requiring a balanced audio reconstruction stage. The interface controller can transmit I2S data to the DAC, which converts the stream at up to 24-bit resolution and 192 kHz before producing a 2 VRMS analog line output. This arrangement is appropriate for studio monitors, recording systems, and high-resolution playback equipment. Clock and data routing must be kept away from the analog outputs, and the board should provide a clean analog supply region because digital switching activity from the USB or network subsystem can otherwise couple into the audio path.
সুপারিশকৃত
AV Receiver and Home Theater Output
The CS4353-CNZ is suitable for a compact AV receiver or home-theater preamp output that requires stereo I2S conversion. Its support for 24-bit audio at rates up to 192 kHz accommodates modern lossless and high-resolution source formats, while the integrated 2 VRMS line driver simplifies the connection to a soundbar, powered speakers, or external amplifier. The converter should be placed near the analog output connector or amplifier input to minimize sensitive trace length. Digital video, processor, and switching-supply regions should remain separated from the DAC to reduce potential audio interference.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা CS4353-CNZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | CS4353-DNZ |
|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic |
| Package | 24-QFN (4 x 4 mm) | 24-QFN (4 x 4 mm) |
| Product Type | Stereo audio DAC | Stereo audio DAC |
মূল পার্থক্যসমূহ
- Integrated high-level analog output (বনামCS4353-DNZ)
- High-resolution multirate conversion (বনামCS4353-DNZ)
- Compact integrated stereo signal path (বনামCS4353-DNZ)
ডিজাইন নোট
Route the CS4353-CNZ analog outputs away from I2S clock and data traces, switching-regulator connections, and high-current amplifier outputs. Keep the I2S source close to the digital input pins while preserving short, direct analog paths from the DAC to the downstream line amplifier. Continuous ground planes and disciplined separation between analog and digital regions reduce the chance that switching activity will modulate the 2 VRMS output.
Use the manufacturer recommended 24-QFN land pattern and solder the exposed pad to a properly connected ground region. The exposed pad provides the principal thermal path from the device and also supports electrical grounding. Apply the package’s specified land geometry, solder-paste volume, and reflow profile consistently; inadequate exposed-pad attachment can reduce heat dissipation and make system reliability dependent on the board assembly process.
Provide local decoupling close to the supply and ground pins, with separate analog and digital supply branches where the board architecture permits it. The CS4353-CNZ operates from a 3.3 V supply architecture, so upstream regulators should have adequate voltage headroom and low ripple. Keep the analog output return current in the analog ground region and avoid routing it through digital return paths carrying clock, interface, or switching currents.
Do not assume that the CS4353-CNZ is a direct headphone-power stage or a passive-speaker amplifier. Its specified 2 VRMS output is a line-level signal intended for a following amplifier stage. Also avoid substituting a differently suffixed ordering code based only on the family name: confirm the complete pin list, clock requirements, temperature grade, qualification, and lifecycle status before replacing CS4353-CNZ in a production design.
কমপ্লায়েন্স তথ্য
The available product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is treated as not applicable because this is an audio converter IC rather than an automotive-qualified device.