Cirrus Logic Inc.

CS4353-CNZ - 24-Bit Stereo DAC with 2 VRMS Output

MPN: CS4353-CNZ ✓ Aktif
3.3 V Vdss 24-QFN (4 x 4 mm) Package
MOQ: 1 |

CS4353-CNZ Genel Bakış

The Cirrus Logic CS4353-CNZ is a 24-bit stereo digital-to-analog converter with a maximum sampling rate of 192 kHz, integrated 2 VRMS line-level drivers, and a 24-QFN 4 x 4 mm package. It operates from a 3.3 V supply and accepts I2S digital audio, providing a complete signal path from digital interpolation through analog output filtering.

A stereo DAC converts digital audio samples into an analog voltage suitable for line-level amplification. The CS4353 belongs to the broader digital-to-analog converter hierarchy within audio converter ICs and signal-chain semiconductors. Its integrated architecture reduces the number of external analog components required when driving a conventional audio input stage compared with a converter that outputs only a lower-level reference signal.

The converter uses a fifth-order multi-bit delta-sigma digital-to-analog architecture. Other integrated functions include digital interpolation, digital de-emphasis, analog filtering, and an on-chip 2 VRMS line-level driver. The specified 24-bit resolution and 192 kHz sampling capability support high-resolution consumer and professional audio formats, including 44.1 kHz, 48 kHz, 96 kHz, and 192 kHz streams when the upstream digital audio interface supplies them.

The CS4353-CNZ accepts I2S-format digital audio and operates from a 3.3 V analog and digital supply architecture. Its reported digital supply range of 0.85 V to 3.47 V provides information about the internal digital operating domain, while the line-output stage is designed for 2 VRMS output. The 24-QFN package supports compact surface-mount layouts but requires careful exposed-pad soldering and thermal design.

Typical applications include stereo hi-fi playback, powered speakers, headphones with external amplification, AV receivers, game consoles, digital mixing consoles, and USB or network audio interfaces. The integrated line driver is particularly useful when the system requires a balanced architecture outside the DAC or when designing a compact analog output stage.

The most important layout consideration is separating sensitive analog outputs from noisy digital and switching circuitry while keeping the exposed thermal pad properly connected to the ground plane. Place input and output decoupling capacitors close to their associated pins, follow the recommended footprint, and verify the exposed-pad soldering process for the 24-QFN package.

This page combines the manufacturer-defined converter functions, exact package and operating information, procurement guidance, replacement analysis, comparison parameters, and implementation-focused design notes to support both component selection and first-board bring-up.

Drop-in alternatifler için CS4353-CNZ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller CS4353-CNZ (aynı form faktörü ve ayağa oturma) — farklı olan Package.

Cirrus Logic Inc.
Package: 24-QFN, 4 mm x 4 mm
İle Karşılaştır CS4353-CNZ →

CS4353-DNZ

✅ Yerleştirme
Cirrus Logic Inc.
📦 24-QFN (4 x 4 mm)
Stereo digital-to-analog converter · 24 bit · 192 kHz · I2S · 3.3 V · 2 VRMS · 106 dB · 2 channels

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

CS4353-CNZ Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Stereo audio digital-to-analog converter IC
Çözünürlük 24 bit
Maximum Sampling Rate 192 kHz
Number of Audio Channels 2 channels
Digital Audio Interface I2S
Converter Architecture Fifth-order multi-bit delta-sigma
Analog Line Output 2 VRMS
Nominal Supply Voltage 3.3 V
Digital Supply Range 0.85 V to 3.47 V
Integrated Functions Digital interpolation, digital de-emphasis, analog filtering, and line-level output driver
Paket 24-QFN (4 x 4 mm)
Montaj Türü Surface mount
İşletim Sıcaklığı -40 °C to +85 °C
Exposed Thermal Pad Yes
RoHS Durumu Unknown
REACH Status Unknown
AEC-Q100 Qualification Not applicable

CS4353-CNZ 24-qfn (4 x 4 mm) Pin Yapısı Kılavuzu

CS4353-CNZ (24-qfn (4 x 4 mm) paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

24-qfn (4 x 4 mm) paket pin çizelgesi için CS4353-CNZ

Ayrıntılı pin çıkış verisi mevcut değil: CS4353-CNZ.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

CS4353-CNZ için uygundur 6 uygulamas: Compact Hi-Fi Stereo DAC, Powered Speaker Interface, Headphone and Line-Level Output, Digital Mixing Console Output, USB and Network Audio Interface, AV Receiver and Home Theater Output.

🎧

Compact Hi-Fi Stereo DAC

The CS4353-CNZ fits a compact stereo hi-fi output stage because it combines 24-bit conversion, operation up to 192 kHz, and an integrated 2 VRMS line driver in a 24-QFN 4 x 4 mm package. It can receive I2S streams directly from a digital audio transport and pass the converted analog signal to a downstream power amplifier. Using the onboard filtering and line driver reduces the number of discrete conversion and output stages required. The implementation must still preserve a quiet analog supply, short output traces, controlled ground returns, and adequate exposed-pad soldering to preserve low-noise performance.

🔊

Powered Speaker Interface

The CS4353-CNZ is suitable for the digital front end of a powered stereo speaker because its 2 VRMS line-level outputs can feed an external power amplifier. The converter accepts 24-bit I2S audio and supports sample rates up to 192 kHz, allowing the speaker system to retain high-resolution source fidelity. A practical design places the DAC close to the output amplifier input and keeps the analog path away from switching regulators and digital clocks. The line-level output should still be checked against amplifier gain, input impedance, coupling requirements, and protection limits for the selected speaker topology.

🎧

Headphone and Line-Level Output

The CS4353-CNZ can provide a low-level analog source for a headphone amplifier when 2 VRMS line output is appropriate for the following stage. Its integrated analog filtering and line driver reduce the external circuitry needed between the I2S interface and the amplifier, while 24-bit resolution and 192 kHz operation preserve high-resolution source capability. Designers should avoid treating the DAC output as a direct high-current headphone drive stage and should use a dedicated amplifier with the required impedance and current capability. Short output routing, quiet supply rails, and a clean analog ground reference remain essential.

🎚️

Digital Mixing Console Output

The CS4353-CNZ can serve as the final stereo conversion stage in a digital mixing console or digital audio mixer because it accepts I2S input and supports 24-bit audio at rates up to 192 kHz. The integrated fifth-order multi-bit delta-sigma converter and analog filter provide a direct route from the mixer’s digital bus to a 2 VRMS line output. This is useful when multiple channels are already mixed and only one stereo master output is required. The physical design should isolate the DAC and its output network from high-current amplifier channels, use short ground returns, and provide local supply bypassing at the device pins.

🖥️

USB and Network Audio Interface

The CS4353-CNZ fits a USB or network audio interface requiring a balanced audio reconstruction stage. The interface controller can transmit I2S data to the DAC, which converts the stream at up to 24-bit resolution and 192 kHz before producing a 2 VRMS analog line output. This arrangement is appropriate for studio monitors, recording systems, and high-resolution playback equipment. Clock and data routing must be kept away from the analog outputs, and the board should provide a clean analog supply region because digital switching activity from the USB or network subsystem can otherwise couple into the audio path.

📺

AV Receiver and Home Theater Output

The CS4353-CNZ is suitable for a compact AV receiver or home-theater preamp output that requires stereo I2S conversion. Its support for 24-bit audio at rates up to 192 kHz accommodates modern lossless and high-resolution source formats, while the integrated 2 VRMS line driver simplifies the connection to a soundbar, powered speakers, or external amplifier. The converter should be placed near the analog output connector or amplifier input to minimize sensitive trace length. Digital video, processor, and switching-supply regions should remain separated from the DAC to reduce potential audio interference.

What is the CS4353-CNZ?
The CS4353-CNZ is a Cirrus Logic 24-bit stereo audio DAC designed for I2S digital input, with operation up to 192 kHz and integrated 2 VRMS line-level outputs. According to the manufacturer datasheet, it combines digital interpolation, a fifth-order multi-bit delta-sigma converter, digital de-emphasis, analog filtering, and an output driver in one 24-QFN device.
What are the key specifications of CS4353-CNZ that engineers should know?
The CS4353-CNZ provides 24-bit resolution, two stereo channels, I2S input, operation up to 192 kHz, and a nominal 3.3 V supply. The manufacturer datasheet also identifies a fifth-order multi-bit delta-sigma conversion stage and an integrated 2 VRMS line-level driver. The device uses a compact 24-QFN 4 x 4 mm package with an exposed pad for board-level thermal implementation.
Where can I download the CS4353-CNZ datasheet PDF?
The CS4353-CNZ datasheet is accessible through the linked datasheet archive, which reproduces the Cirrus Logic document and its product details. The manufacturer document identifies the part as a 3.3 V stereo audio DAC with 2 VRMS line output. Use the pin-description table, electrical characteristics, and application schematic in the datasheet when assigning PCB connections and decoupling.
Where can I find the CS4353-CNZ pinout?
The CS4353-CNZ uses a 24-QFN 4 x 4 mm package, and its complete numbered pin assignment should be taken from the manufacturer pin-description table. Use the package drawing and land pattern together when assigning I2S inputs, analog outputs, supply pins, ground connections, and the exposed pad. The exposed pad normally follows the datasheet ground and soldering instructions.
What is the operating voltage of CS4353-CNZ?
The CS4353-CNZ is designed around a 3.3 V supply, with a reported digital supply operating range of 0.85 V to 3.47 V. According to the Cirrus Logic product description, the complete stereo DAC and its 2 VRMS line-level driver operate from the 3.3 V supply architecture. Confirm each supply rail against the electrical-characteristics table before finalizing the power design.
Can CS4353-CNZ drive headphones or powered speakers?
The CS4353-CNZ can feed a powered speaker or an external headphone amplifier because its integrated driver provides 2 VRMS line-level output. It does not replace a high-power speaker amplifier or a dedicated headphone output stage. The system still needs appropriate gain, impedance, coupling, protection, and output-device selection for the intended load.
What sample rates and audio formats can CS4353-CNZ reproduce?
The CS4353-CNZ supports digital audio operation up to 192 kHz through its I2S interface and offers 24-bit converter resolution. It can therefore process common 44.1 kHz and 48 kHz program material as well as higher-rate streams such as 96 kHz and 192 kHz when the source, transport, clocking, and software chain support those rates.
Is CS4353-CNZ suitable for a hi-fi audio DAC?
The CS4353-CNZ is suitable for compact hi-fi audio output stages because it combines a 24-bit converter, 192 kHz operation, integrated analog filtering, and a 2 VRMS line driver. The output still requires a clean analog supply, careful grounding, short output paths, and a high-quality downstream amplifier when driving passive speakers or studio monitors.
Where can I buy CS4353-CNZ online?
Use the Request a Quote form on this page to request CS4353-CNZ availability, order quantities, and a current commercial quotation. The request should identify the exact CS4353-CNZ ordering code and required package quantity. This avoids ambiguity with closely named variants that may use different package or shipping suffixes.
What is the price of CS4353-CNZ?
Use the Request a Quote form on this page for the current CS4353-CNZ unit pricing and volume-break quotation. The form supports comparison of the exact ordering code, order quantity, and delivery requirements. Pricing should be confirmed for the current date because component-market availability and commercial terms can change.
What is the lead time and stock status for CS4353-CNZ?
Request the current CS4353-CNZ stock position, minimum order quantity, and production lead time through the Request a Quote form on this page. Include your required delivery date and annual usage so the sourcing response reflects an actionable supply plan rather than a generic availability statement.
CS4353-CNZ vs CS4353-DNZ: which is better for an audio design?
The CS4353-CNZ and CS4353-DNZ are closely related Cirrus Logic stereo DAC options, but the available comparison information does not establish every ordering-code difference. Both are associated with the same CS4353 converter family and I2S audio architecture. Review the manufacturer ordering table and electrical limits before selecting one as a drop-in replacement for a specific production BOM.
When should I choose CS4353-CNZ over a CS4353 family alternative?
Choose CS4353-CNZ when the design specifically calls for the 24-bit, 192 kHz, 2 VRMS stereo DAC in the 24-QFN 4 x 4 mm package and its exact ordering code matches the required qualification and temperature conditions. A family alternative should be selected only after its pin assignment, supply requirements, temperature grade, lifecycle status, and application support are confirmed as equivalent.
What can replace CS4353-CNZ?
CS4353-DNZ is the closest identified family candidate for evaluating as a replacement for CS4353-CNZ, but a true drop-in substitution requires identical pin functions, supply behavior, clocking, reset requirements, and 24-QFN 4 x 4 mm land pattern. Confirm those details in the manufacturer ordering information before changing an assembled PCB or production BOM.
Is CS4353-DNZ the same as CS4353-CNZ?
CS4353-DNZ and CS4353-CNZ belong to the same Cirrus Logic stereo DAC family and are associated with the same core conversion functions, but their ordering codes are not automatically interchangeable. The suffix can encode lifecycle, qualification, temperature, finish, or packaging distinctions. Verify the manufacturer ordering table, and do not treat the two names as identical without that review.
What is the best drop-in replacement for CS4353-CNZ?
CS4353-DNZ is the closest identified candidate, but no alternative can be certified as a drop-in replacement from the available documentation alone. A qualified replacement must retain the 24-QFN 4 x 4 mm footprint, I2S interface, 3.3 V supply architecture, 2 VRMS output function, reset and clock behavior, and the required operating-temperature range. Review the complete pin and electrical tables before substitution.

Mühendislik referans verileri: CS4353-CNZ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose CS4353-CNZ for compact stereo audio designs that require I2S input, 24-bit resolution, operation up to 192 kHz, and a 2 VRMS line-level output from a 3.3 V supply. It is particularly suitable for hi-fi playback, powered speakers, AV receiver preamp outputs, digital mixers, and USB or network audio interfaces. CS4353-DNZ is the closest identified family candidate and should be considered when its ordering-code details meet the exact temperature, qualification, lifecycle, and pin requirements. Do not select an alternative solely because it has the same CS4353 family name. Verify the complete pin descriptions, clocking behavior, electrical limits, and exposed-pad land pattern. For designs requiring a direct high-current headphone drive or passive-speaker output, add a suitable power amplifier because the DAC provides a line-level signal rather than speaker-level power.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün CS4353-DNZ
Brand Cirrus Logic Cirrus Logic
Package 24-QFN (4 x 4 mm) 24-QFN (4 x 4 mm)
Product Type Stereo audio DAC Stereo audio DAC

Ana Farklılayıcılar

  • Integrated high-level analog output (karşılaştırma:CS4353-DNZ)
  • High-resolution multirate conversion (karşılaştırma:CS4353-DNZ)
  • Compact integrated stereo signal path (karşılaştırma:CS4353-DNZ)

Tasarım Notları

Route the CS4353-CNZ analog outputs away from I2S clock and data traces, switching-regulator connections, and high-current amplifier outputs. Keep the I2S source close to the digital input pins while preserving short, direct analog paths from the DAC to the downstream line amplifier. Continuous ground planes and disciplined separation between analog and digital regions reduce the chance that switching activity will modulate the 2 VRMS output.

Use the manufacturer recommended 24-QFN land pattern and solder the exposed pad to a properly connected ground region. The exposed pad provides the principal thermal path from the device and also supports electrical grounding. Apply the package’s specified land geometry, solder-paste volume, and reflow profile consistently; inadequate exposed-pad attachment can reduce heat dissipation and make system reliability dependent on the board assembly process.

Provide local decoupling close to the supply and ground pins, with separate analog and digital supply branches where the board architecture permits it. The CS4353-CNZ operates from a 3.3 V supply architecture, so upstream regulators should have adequate voltage headroom and low ripple. Keep the analog output return current in the analog ground region and avoid routing it through digital return paths carrying clock, interface, or switching currents.

Do not assume that the CS4353-CNZ is a direct headphone-power stage or a passive-speaker amplifier. Its specified 2 VRMS output is a line-level signal intended for a following amplifier stage. Also avoid substituting a differently suffixed ordering code based only on the family name: confirm the complete pin list, clock requirements, temperature grade, qualification, and lifecycle status before replacing CS4353-CNZ in a production design.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The available product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is treated as not applicable because this is an audio converter IC rather than an automotive-qualified device.

Veri doğrulanma tarihi: 2026-11-16 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

CS4353-CNZ datasheet CS4353-CNZ pinout CS4353-CNZ datasheet pdf CS4353-CNZ equivalent CS4353-CNZ replacement CS4353-CNZ cross reference CS4353-CNZ vs CS4353-DNZ CS4353-CNZ footprint CS4353-CNZ 24-QFN pinout Cirrus Logic CS4353-CNZ CS4353-CNZ price CS4353-CNZ stock CS4353-CNZ audio DAC application CS4353-CNZ 192 kHz I2S what can replace CS4353-CNZ

İlgili Bileşenler ve Terimler

Cirrus Logic CS4353-CNZ CS4353-DNZ Stereo DAC Digital-to-analog converter Audio converter IC Delta-sigma converter Fifth-order multi-bit architecture I2S 24-bit resolution 192 kHz sampling rate 2 VRMS line output 3.3 V supply Digital interpolation Digital de-emphasis Analog filtering 24-QFN QFN family Surface mount Exposed pad Hi-fi audio Powered speaker USB audio interface Network audio interface Digital mixing console
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle