Cirrus Logic Inc.

CS4362-KQZ - 6-Channel 192kHz Audio DAC | Cirrus Logic

MPN: CS4362-KQZ ✓ সক্রিয়
5 V Vdss 48-pin LQFP, 7 mm x 7 mm Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

CS4362-KQZ সারাংশ

The Cirrus Logic CS4362-KQZ is a six-channel audio digital-to-analog converter with 24-bit resolution, support for PCM and DSD audio, and operation up to 192kHz. The device is supplied in a 48-pin LQFP package measuring 7 mm by 7 mm, making it suitable for multichannel consumer audio, professional audio, and compact digital audio systems. Its six-channel architecture provides six differential or single-ended analog outputs while accepting serialized digital audio through a dedicated audio interface.

An audio DAC is a signal-conversion integrated circuit that transforms digital PCM, DSD, or related audio data into continuous analog voltage signals. Within the broader semiconductor hierarchy, the CS4362-KQZ belongs to the DAC family, the ADC/DAC category, and ultimately the wider signal-processing and data-conversion IC market. It is used where digital audio sources must reach speakers, amplifiers, mixers, or analog processing stages through a controlled multichannel analog output.

The manufacturer datasheet identifies the CS4362-KQZ as a 114 dB six-channel DAC operating at up to 192kHz. These figures characterize the device as a high-resolution converter intended for demanding audio paths. Six integrated channels reduce the number of separate converters required in a multichannel system, while the 24-bit interface supports high-fidelity digital audio sources. The manufacturer also documents one-half-LSB triangular PDF dither for tested 25°C operation, noting that performance is limited by 16-bit quantization noise in that test configuration.

The CS4362-KQZ operates from a single 5 V supply, as specified by the manufacturer datasheet. Its architecture includes a digital interpolation stage, a multi-bit delta-sigma modulator, analog output stages, and digital controls for channel mapping, volume, and audio operating modes. The converter supports multiple data formats and filter configurations so the same device can address different source rates and playback priorities. Its differential outputs support balanced audio routing, while single-ended use is also supported where the system architecture requires it.

Typical applications include surround-sound receivers, powered speakers, multichannel audio preamplifiers, digital mixing consoles, home-theater processors, and professional playback equipment. The six-channel structure is especially useful for 5.1-channel systems, while higher-channel digital-mixing applications can combine outputs from multiple converters. The 192kHz capability also makes the device relevant to high-resolution source material, mastering infrastructure, and conversion systems requiring a wide operating-rate range.

Power and layout design require attention to analog and digital return paths, output-driver stability, clock cleanliness, and supply decoupling. Follow the recommended capacitor values and application-circuit arrangement in the manufacturer datasheet, and place the digital interface and analog output sections so high-frequency switching currents do not pass beneath sensitive analog pins. The exposed package construction also requires thermal review when the converter operates continuously in compact enclosures.

This page organizes the CS4362-KQZ specifications, verified source links, same-family drop-in alternatives, comparison parameters, and practical design guidance. It also highlights the distinctions that matter when deciding whether the original CS4362, the CS4362A revision, or a suffix variant best matches a completed audio board.

এর জন্য ড্রপ-ইন বিকল্প CS4362-KQZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

CS4362-KQZ/E

✅ ড্রপ-ইন
📦 48-LQFP (7x7)
Same six-channel, 192kHz DAC configuration and 48-LQFP package; ordering-suffix conditions differ, with the exact temperature and commercial terms requiring confirmation

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

CS4362A-CQZ

✅ ড্রপ-ইন
📦 48-LQFP (7x7)
Retains 6 channels, 114 dB dynamic range, 192kHz operation and 48-LQFP package, while some revision-specific electrical characteristics differ

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

CS4362A-DQZ

✅ ড্রপ-ইন
📦 48-LQFP (7x7)
Retains the six-channel 192kHz LQFP-48 format and 114 dB class of performance, with suffix and revision-specific electrical differences

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

CS4362-KQZ সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Device Type 6-channel audio digital-to-analog converter
রেজোলিউশন 24 bit
Maximum Sample Rate 192 kHz
Dynamic Range 114 dB
Supported Digital Audio PCM and DSD
Number of Audio Channels 6 channels
আউটপুট কনফিগারেশন 6 analog outputs with differential and single-ended support
সাপ্লাই ভোল্টেজ 5 V
প্যাকেজ 48-pin LQFP, 7 mm x 7 mm
মাউন্টিং টাইপ Surface mount
অপারেটিং তাপমাত্রা -10 °C to +70 °C
Converter Architecture Multi-bit delta-sigma modulator
Digital Input Serialized PCM and DSD audio
Dither One-half LSB triangular PDF dither
Dither Test Condition 25 °C
Qualification Test Note Performance limited by 16-bit quantization noise in the documented dither test
Evaluation Support CDB4362 customer demonstration board

CS4362-KQZ 48-pin lqfp, 7 mm x 7 mm পিন কনফিগারেশন গাইড

CS4362-KQZ (48-pin lqfp, 7 mm x 7 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

CS4362-KQZ-এর জন্য 48-pin lqfp, 7 mm x 7 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি CS4362-KQZ.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

CS4362-KQZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Surround-Sound Receiver DAC Stage, Professional Digital Mixing Console, High-Resolution Network Audio Player, Powered Multiway Speaker, Digital Audio Recording Playback System, Home Theater Processor.

🎧

Surround-Sound Receiver DAC Stage

The CS4362-KQZ fits a surround-sound receiver because it converts six digital audio channels in one package while supporting rates up to 192kHz and a 114 dB dynamic-range rating. Place the converter near the analog output stage and connect PCM or DSD data through the digital audio interface. The six-channel architecture aligns directly with 5.1-channel playback, reducing the number of discrete DAC packages. The 5 V supply and 48-LQFP footprint allow implementation on a conventional multilayer audio board, although the selected filtering, clocking, and channel-mapping modes must match the receiver architecture.

🎚️

Professional Digital Mixing Console

A digital mixing console can use the CS4362-KQZ for a six-channel monitor or auxiliary output bank. Its 24-bit conversion, 192kHz maximum sample rate and 114 dB dynamic range support high-resolution program monitoring and expanded digital mixing systems. The converter accepts serialized digital audio and provides six analog output channels, making it practical for centralized conversion ahead of balanced output stages. Designers should maintain short, balanced analog paths and isolate the digital clock and serial-data return currents from the analog output reference to preserve signal quality.

🌐

High-Resolution Network Audio Player

The CS4362-KQZ is suitable for a high-resolution network or streaming player because it supports PCM and DSD input up to 192kHz through a six-channel DAC. A two-channel implementation can use the converter’s selectable analog outputs while retaining a unified converter architecture for future multichannel expansion. The 114 dB dynamic-range rating and 24-bit interface suit source material requiring greater precision than a conventional 16-bit playback chain. The system clock and digital interface must remain synchronized with the network audio source to avoid unsupported rate combinations or clocking faults.

🔊

Powered Multiway Speaker

A powered multiway speaker or monitor system can place the CS4362-KQZ ahead of discrete power-amplifier stages to convert digital source material into six analog channels. Its 192kHz operating ceiling accommodates high-resolution streams, while the 114 dB dynamic-range specification supports low-noise playback. The 48-LQFP package reduces the footprint required for a six-channel converter. In compact enclosures, account for heat from the complete output chain and keep sensitive analog traces away from digital switching and power-converter currents.

🖥️

Digital Audio Recording Playback System

The CS4362-KQZ can serve as the monitoring and playback converter in a professional digital recording system. Six outputs allow simultaneous conversion of main, effects, or auxiliary channels, while operation up to 192kHz supports high-resolution project workflows. The 24-bit data path and 114 dB dynamic-range rating provide useful headroom for monitoring calibrated listening environments. Clock architecture, digital de-emphasis behavior, interpolation-filter selection and output volume settings should be established according to the target system’s source format rather than copied from a generic configuration.

📺

Home Theater Processor

The CS4362-KQZ is a natural fit for the main analog output bank of a home-theater processor because six channels cover a standard surround configuration without requiring six separate converter packages. Support for PCM and DSD, operation up to 192kHz and a 114 dB dynamic-range rating align with modern high-resolution source requirements. Use the converter’s channel assignment and digital controls to map streams to the correct physical outputs, and follow the datasheet’s reference and decoupling arrangement to minimize noise coupling between the digital interface and six analog outputs.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

CS4362-KQZ/E same-family suffix alternative ব্যবহৃত হয়: Surround-Sound Receiver DAC Stage, Professional Digital Mixing Console, High-Resolution Network Audio Player, Digital Audio Recording Playback System, Home Theater Processor CS4362A-CQZ same-family revision alternative ব্যবহৃত হয়: Surround-Sound Receiver DAC Stage, High-Resolution Network Audio Player, Powered Multiway Speaker, Home Theater Processor CS4362A-DQZ same-family converter alternative ব্যবহৃত হয়: Professional Digital Mixing Console, Powered Multiway Speaker, Digital Audio Recording Playback System
What is the CS4362-KQZ?
The Cirrus Logic CS4362-KQZ is a six-channel, 24-bit audio digital-to-analog converter designed for PCM and DSD playback. According to the manufacturer datasheet CS4362_DS257F2, it supports sampling rates up to 192kHz, provides a 114 dB dynamic-range rating, and operates from a 5 V supply. The device uses a multi-bit delta-sigma architecture and is packaged in a 48-pin, 7 mm by 7 mm LQFP package.
How many channels does the CS4362-KQZ support?
The CS4362-KQZ provides six analog output channels in one converter. According to the manufacturer datasheet CS4362_DS257F2, the six-channel implementation is intended for multichannel audio systems such as surround-sound receivers and professional playback equipment. Its 114 dB dynamic-range specification and maximum 192kHz operating rate make it suitable for high-resolution multichannel conversion while reducing the number of separate DAC packages required.
What is the maximum sampling rate of CS4362-KQZ?
The CS4362-KQZ supports operation up to 192kHz, according to the manufacturer datasheet CS4362_DS257F2. Its digital interface accepts PCM and DSD audio, allowing the same converter to handle conventional high-resolution PCM streams and DSD-compatible sources. The operating rate must still remain within the limits specified for the selected digital input mode, format, and system clock configuration.
What package does the CS4362-KQZ use?
The CS4362-KQZ uses a 48-pin LQFP package measuring 7 mm by 7 mm. The manufacturer datasheet identifies the device as a 48-pin LQFP and describes the CDB4362 customer demonstration board for evaluation. Use the pin-description table and package drawing in CS4362_DS257F2 when assigning nets and laying out the board, especially around power, ground, clock, and analog-output connections.
What supply voltage does the CS4362-KQZ require?
The CS4362-KQZ operates from a single 5 V supply. According to the manufacturer datasheet CS4362_DS257F2, the device is intended for a 5 V analog and digital supply arrangement. Decoupling should follow the capacitor values, placement, and return-path guidance shown in the datasheet application information. Verify the selected regulator’s noise, startup behavior, and load capability against the converter’s supply-current requirements.
Is CS4362-KQZ suitable for surround-sound receivers?
Yes, the CS4362-KQZ is well suited to surround-sound receiver output stages because it integrates six audio DAC channels and supports sampling rates up to 192kHz. The 114 dB dynamic-range rating supports high-fidelity playback requirements, while the 48-pin LQFP package simplifies use in a conventional multilayer PCB. Channel mapping and single-ended or differential output selection should be configured to match the receiver’s analog architecture.
Where can I download the CS4362-KQZ datasheet PDF?
The CS4362-KQZ datasheet PDF is identified as CS4362_DS257F2 and can be accessed through the manufacturer-hosted document link on this page’s data-source list. It contains the electrical characteristics, digital interface information, pin descriptions, application circuitry, and 48-pin package drawing. Use that document as the controlling reference for pin assignments, supported data formats, filtering behavior, and decoupling recommendations.
Where can I find the CS4362-KQZ pinout?
The CS4362-KQZ pinout is found in the pin-description table and package drawing in manufacturer datasheet CS4362_DS257F2. The component is a 48-pin LQFP, so all 48 physical positions must be assigned in the PCB library and reviewed against the datasheet. Use the pin table rather than inferring functions from a generic 48-pin symbol, and preserve the exposed pad and thermal-land requirements shown in the package drawing.
What is the difference between CS4362-KQZ and CS4362A-CQZ?
The CS4362-KQZ is the original CS4362 six-channel 192kHz audio DAC, while the CS4362A-CQZ is a later family revision. Cross-reference information lists both as six-channel, 114 dB, 192kHz converters in 48-LQFP packages, but also notes that some electrical characteristics differ. For an existing design, verify every mode, timing value, control register, and analog specification in the applicable datasheet before treating the revision as interchangeable.
When should I choose the CS4362-KQZ over CS4362A-CQZ?
Choose the CS4362-KQZ when the completed board is specifically designed for the original CS4362 and its verified control-register and electrical behavior. The CS4362A-CQZ is attractive when its newer revision behavior has been validated for the target application, but compatibility should not be assumed from channel count and package alone. Compare supply startup, clocking, digital filters, volume control, dither, and register behavior against the manufacturer documentation.
What is the best drop-in replacement for CS4362-KQZ?
The closest documented same-family replacement is the CS4362-KQZ/E, which retains the CS4362 identity and 48-pin LQFP implementation while changing the ordering suffix. The CS4362A-CQZ and CS4362A-DQZ are family revisions that require a more detailed functional comparison because some electrical characteristics differ. Verify the exact suffix, temperature grade, pin behavior, and register map in the manufacturer datasheet before committing to a replacement.
Can CS4362-KQZ/E replace CS4362-KQZ?
The CS4362-KQZ/E is the closest documented alternate for the CS4362-KQZ because it retains the six-channel 192kHz DAC configuration and the same 48-pin LQFP package. Its exact suffix-specific conditions and commercial status should be confirmed against the manufacturer ordering information. Pin compatibility alone is not sufficient for a production substitution, so also compare supply sequencing, clocking, control registers, and analog performance.
Where can I buy CS4362-KQZ online?
Use the Request a Quote form on this page to request current CS4362-KQZ availability, unit pricing, and lead time for the exact 48-pin LQFP ordering code. The manufacturer datasheet identifies a 114 dB, 192kHz six-channel converter, and the product is offered in a 48-LQFP package. A quote request lets the order be checked against the required suffix, quantity, and delivery schedule.
What is the price of CS4362-KQZ?
Current CS4362-KQZ pricing is shown through the Request a Quote form on this page because market prices and availability can change with quantity and lead time. Submit the exact MPN, package code, and required quantity for a current quotation. The device is the 48-LQFP version of Cirrus Logic’s six-channel, 24-bit, 192kHz audio DAC, so the quote should preserve that exact configuration.
How long is the lead time for CS4362-KQZ?
Request the current CS4362-KQZ lead time through the Request a Quote form on this page. Lead time depends on the required quantity, manufacturing availability, and delivery terms, so it should be confirmed for the exact MPN rather than inferred from general catalog information. Include the target package, annual usage, and required date when submitting the request to obtain an actionable schedule.
Is CS4362-KQZ in stock?
Current CS4362-KQZ stock should be confirmed through the Request a Quote form on this page for the exact quantity and suffix. The product is a six-channel, 24-bit, 192kHz audio DAC in a 48-pin LQFP package, and stocked quantities can change after an order is placed. Provide your required date and target quantity so the response reflects the actual order context.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা CS4362-KQZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the CS4362-KQZ for a new six-channel audio design that requires 24-bit PCM or DSD conversion, operation up to 192kHz and a 114 dB dynamic-range rating in a 48-LQFP package. Choose the CS4362-KQZ/E when it is the preferred manufacturer suffix for the intended temperature and commercial requirements and has passed a complete interface review. Consider the CS4362A-CQZ or CS4362A-DQZ when the newer revision behavior has been validated and its updated electrical characteristics provide a defined design benefit. Do not substitute solely by package and headline specifications: verify clock formats, digital filters, registers, startup behavior, output limits and temperature grade. For an existing board built around the original CS4362, the suffix alternative is generally the lowest-change option, while an A-family revision requires schematic, firmware, and signal-integrity review.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য CS4362-KQZ/E CS4362A-CQZ CS4362A-DQZ
Package 48-LQFP (7x7) 48-LQFP (7x7) 48-LQFP (7x7) 48-LQFP (7x7)
Brand Cirrus Logic Cirrus Logic Cirrus Logic Cirrus Logic
Converter Type 6-channel audio DAC 6-channel audio DAC 6-channel audio DAC 6-channel audio DAC
Resolution 24 bit 24 bit 24 bit 24 bit
Maximum Sample Rate 192 kHz 192 kHz 192 kHz 192 kHz
Revision Status Original CS4362 CS4362 suffix alternative CS4362A revision CS4362A revision

মূল পার্থক্যসমূহ

  • Six integrated audio channels with high-resolution conversion (বনামCS4362A-CQZ)
  • Supports both PCM and DSD digital audio (বনামCS4362-KQZ/E)
  • Original family revision for established board designs (বনামCS4362A-DQZ)

ডিজাইন নোট

Implement the board according to the application circuit and pin-description table in manufacturer datasheet CS4362_DS257F2. Keep digital serial-data and clock routing away from the six analog outputs, and provide a direct return path from the analog ground and reference pins to the relevant power-decoupling capacitor. The 48-LQFP footprint must also include the package’s thermal-land and exposed-pad requirements shown in the mechanical drawing.

Use the 5 V supply arrangement and capacitor values specified in the manufacturer application circuit. Place high-frequency decoupling at the device supply pins with very short ground returns rather than routing supply current through analog output traces. Confirm regulator noise, startup order, and load transient performance for the operating channel configuration, because converter activity and output-state changes can create analog supply disturbance.

Control the digital audio interface so serial data, bit clock, and system clock transitions do not couple into adjacent analog nets. Match the interface according to the manufacturer’s recommended topology, provide a continuous reference plane under the digital section, and avoid stubs on clock and data nets. If the board also contains switching regulators, place their high-current paths and inductors away from the converter’s analog outputs.

Do not treat a matching 48-LQFP package as sufficient proof of interchangeability. The CS4362A family has revision-specific electrical characteristics, and suffix variants can carry different ordering conditions. Before substitution, compare supply sequencing, supported clocks and formats, digital filters, control-register behavior, analog output limits, and operating-temperature requirements. Update the PCB library and firmware only after those checks are complete.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No specific compliance declarations were identified for the exact CS4362-KQZ ordering code. The part is an audio DAC rather than an automotive-qualified device.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

CS4362-KQZ datasheet CS4362-KQZ datasheet pdf CS4362-KQZ pinout CS4362-KQZ equivalent CS4362-KQZ replacement CS4362-KQZ cross reference CS4362-KQZ price Cirrus Logic CS4362-KQZ CS4362 48-LQFP 192kHz DAC CS4362-KQZ surround sound DAC CS4362-KQZ vs CS4362A-CQZ CS4362-KQZ application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Cirrus Logic CS4362-KQZ CS4362-KQZ/E CS4362A-CQZ CS4362A-DQZ digital-to-analog converter DAC audio DAC ADC/DAC delta-sigma modulator 24-bit conversion 192kHz sample rate 114dB dynamic range PCM audio DSD audio 48-LQFP LQFP package family surface-mount package 5V analog supply digital de-emphasis digital interpolation filter surround-sound receiver professional audio console high-resolution network player
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন