CS4362-KQZ - 6-Channel 192kHz Audio DAC | Cirrus Logic
MPN: CS4362-KQZ ✓ AktifCS4362-KQZ Ringkasan
An audio DAC is a signal-conversion integrated circuit that transforms digital PCM, DSD, or related audio data into continuous analog voltage signals. Within the broader semiconductor hierarchy, the CS4362-KQZ belongs to the DAC family, the ADC/DAC category, and ultimately the wider signal-processing and data-conversion IC market. It is used where digital audio sources must reach speakers, amplifiers, mixers, or analog processing stages through a controlled multichannel analog output.
The manufacturer datasheet identifies the CS4362-KQZ as a 114 dB six-channel DAC operating at up to 192kHz. These figures characterize the device as a high-resolution converter intended for demanding audio paths. Six integrated channels reduce the number of separate converters required in a multichannel system, while the 24-bit interface supports high-fidelity digital audio sources. The manufacturer also documents one-half-LSB triangular PDF dither for tested 25°C operation, noting that performance is limited by 16-bit quantization noise in that test configuration.
The CS4362-KQZ operates from a single 5 V supply, as specified by the manufacturer datasheet. Its architecture includes a digital interpolation stage, a multi-bit delta-sigma modulator, analog output stages, and digital controls for channel mapping, volume, and audio operating modes. The converter supports multiple data formats and filter configurations so the same device can address different source rates and playback priorities. Its differential outputs support balanced audio routing, while single-ended use is also supported where the system architecture requires it.
Typical applications include surround-sound receivers, powered speakers, multichannel audio preamplifiers, digital mixing consoles, home-theater processors, and professional playback equipment. The six-channel structure is especially useful for 5.1-channel systems, while higher-channel digital-mixing applications can combine outputs from multiple converters. The 192kHz capability also makes the device relevant to high-resolution source material, mastering infrastructure, and conversion systems requiring a wide operating-rate range.
Power and layout design require attention to analog and digital return paths, output-driver stability, clock cleanliness, and supply decoupling. Follow the recommended capacitor values and application-circuit arrangement in the manufacturer datasheet, and place the digital interface and analog output sections so high-frequency switching currents do not pass beneath sensitive analog pins. The exposed package construction also requires thermal review when the converter operates continuously in compact enclosures.
This page organizes the CS4362-KQZ specifications, verified source links, same-family drop-in alternatives, comparison parameters, and practical design guidance. It also highlights the distinctions that matter when deciding whether the original CS4362, the CS4362A revision, or a suffix variant best matches a completed audio board.
Pilihan pengganti yang segera untuk CS4362-KQZ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
CS4362-KQZ/E
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
CS4362A-CQZ
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
CS4362A-DQZ
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
CS4362-KQZ Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | 6-channel audio digital-to-analog converter |
| Pemecahkatan | 24 bit |
| Maximum Sample Rate | 192 kHz |
| Dynamic Range | 114 dB |
| Supported Digital Audio | PCM and DSD |
| Number of Audio Channels | 6 channels |
| Konfigurasi Output | 6 analog outputs with differential and single-ended support |
| Tegangan Pemberi Arus | 5 V |
| Kemasan | 48-pin LQFP, 7 mm x 7 mm |
| Jenis Pemasangan | Surface mount |
| Suhu Operasi | -10 °C to +70 °C |
| Converter Architecture | Multi-bit delta-sigma modulator |
| Digital Input | Serialized PCM and DSD audio |
| Dither | One-half LSB triangular PDF dither |
| Dither Test Condition | 25 °C |
| Qualification Test Note | Performance limited by 16-bit quantization noise in the documented dither test |
| Evaluation Support | CDB4362 customer demonstration board |
Panduan Konfigurasi Pin CS4362-KQZ 48-pin lqfp, 7 mm x 7 mm
Konfigurasi pin untuk CS4362-KQZ (48-pin lqfp, 7 mm x 7 mm pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk CS4362-KQZ.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
CS4362-KQZ patut untuk 6 aplikasis: Surround-Sound Receiver DAC Stage, Professional Digital Mixing Console, High-Resolution Network Audio Player, Powered Multiway Speaker, Digital Audio Recording Playback System, Home Theater Processor.
Surround-Sound Receiver DAC Stage
The CS4362-KQZ fits a surround-sound receiver because it converts six digital audio channels in one package while supporting rates up to 192kHz and a 114 dB dynamic-range rating. Place the converter near the analog output stage and connect PCM or DSD data through the digital audio interface. The six-channel architecture aligns directly with 5.1-channel playback, reducing the number of discrete DAC packages. The 5 V supply and 48-LQFP footprint allow implementation on a conventional multilayer audio board, although the selected filtering, clocking, and channel-mapping modes must match the receiver architecture.
Disebarkan
Professional Digital Mixing Console
A digital mixing console can use the CS4362-KQZ for a six-channel monitor or auxiliary output bank. Its 24-bit conversion, 192kHz maximum sample rate and 114 dB dynamic range support high-resolution program monitoring and expanded digital mixing systems. The converter accepts serialized digital audio and provides six analog output channels, making it practical for centralized conversion ahead of balanced output stages. Designers should maintain short, balanced analog paths and isolate the digital clock and serial-data return currents from the analog output reference to preserve signal quality.
Disebarkan
High-Resolution Network Audio Player
The CS4362-KQZ is suitable for a high-resolution network or streaming player because it supports PCM and DSD input up to 192kHz through a six-channel DAC. A two-channel implementation can use the converter’s selectable analog outputs while retaining a unified converter architecture for future multichannel expansion. The 114 dB dynamic-range rating and 24-bit interface suit source material requiring greater precision than a conventional 16-bit playback chain. The system clock and digital interface must remain synchronized with the network audio source to avoid unsupported rate combinations or clocking faults.
Disebarkan
Powered Multiway Speaker
A powered multiway speaker or monitor system can place the CS4362-KQZ ahead of discrete power-amplifier stages to convert digital source material into six analog channels. Its 192kHz operating ceiling accommodates high-resolution streams, while the 114 dB dynamic-range specification supports low-noise playback. The 48-LQFP package reduces the footprint required for a six-channel converter. In compact enclosures, account for heat from the complete output chain and keep sensitive analog traces away from digital switching and power-converter currents.
Disebarkan
Digital Audio Recording Playback System
The CS4362-KQZ can serve as the monitoring and playback converter in a professional digital recording system. Six outputs allow simultaneous conversion of main, effects, or auxiliary channels, while operation up to 192kHz supports high-resolution project workflows. The 24-bit data path and 114 dB dynamic-range rating provide useful headroom for monitoring calibrated listening environments. Clock architecture, digital de-emphasis behavior, interpolation-filter selection and output volume settings should be established according to the target system’s source format rather than copied from a generic configuration.
Disebarkan
Home Theater Processor
The CS4362-KQZ is a natural fit for the main analog output bank of a home-theater processor because six channels cover a standard surround configuration without requiring six separate converter packages. Support for PCM and DSD, operation up to 192kHz and a 114 dB dynamic-range rating align with modern high-resolution source requirements. Use the converter’s channel assignment and digital controls to map streams to the correct physical outputs, and follow the datasheet’s reference and decoupling arrangement to minimize noise coupling between the digital interface and six analog outputs.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk CS4362-KQZ — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | CS4362-KQZ/E | CS4362A-CQZ | CS4362A-DQZ |
|---|---|---|---|---|
| Package | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) |
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Converter Type | 6-channel audio DAC | 6-channel audio DAC | 6-channel audio DAC | 6-channel audio DAC |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit |
| Maximum Sample Rate | 192 kHz | 192 kHz | 192 kHz | 192 kHz |
| Revision Status | Original CS4362 | CS4362 suffix alternative | CS4362A revision | CS4362A revision |
Penyeberangsung Jelas
- Six integrated audio channels with high-resolution conversion (vsCS4362A-CQZ)
- Supports both PCM and DSD digital audio (vsCS4362-KQZ/E)
- Original family revision for established board designs (vsCS4362A-DQZ)
Catatan Desain
Implement the board according to the application circuit and pin-description table in manufacturer datasheet CS4362_DS257F2. Keep digital serial-data and clock routing away from the six analog outputs, and provide a direct return path from the analog ground and reference pins to the relevant power-decoupling capacitor. The 48-LQFP footprint must also include the package’s thermal-land and exposed-pad requirements shown in the mechanical drawing.
Use the 5 V supply arrangement and capacitor values specified in the manufacturer application circuit. Place high-frequency decoupling at the device supply pins with very short ground returns rather than routing supply current through analog output traces. Confirm regulator noise, startup order, and load transient performance for the operating channel configuration, because converter activity and output-state changes can create analog supply disturbance.
Control the digital audio interface so serial data, bit clock, and system clock transitions do not couple into adjacent analog nets. Match the interface according to the manufacturer’s recommended topology, provide a continuous reference plane under the digital section, and avoid stubs on clock and data nets. If the board also contains switching regulators, place their high-current paths and inductors away from the converter’s analog outputs.
Do not treat a matching 48-LQFP package as sufficient proof of interchangeability. The CS4362A family has revision-specific electrical characteristics, and suffix variants can carry different ordering conditions. Before substitution, compare supply sequencing, supported clocks and formats, digital filters, control-register behavior, analog output limits, and operating-temperature requirements. Update the PCB library and firmware only after those checks are complete.
Maklumat Kesediaan
No specific compliance declarations were identified for the exact CS4362-KQZ ordering code. The part is an audio DAC rather than an automotive-qualified device.