CY8C3246LTI-145 - 50MHz 8-Bit PSoC 3 MCU | Infineon
MPN: CY8C3246LTI-145 ✓ সক্রিয়CY8C3246LTI-145 সারাংশ
A PSoC 3 is a programmable system-on-chip, a category of microcontroller that integrates a CPU, programmable digital blocks, analog functions, and programmable I/O into one package. Unlike a fixed-function microcontroller, a PSoC can be configured in firmware to implement control, sensing, signal conditioning, and communication functions while reducing the number of discrete components required around the processor.
The CY8C3246LTI-145 provides 64 KB of program memory, 8K x 8 RAM, 25 I/O, and a 50 MHz operating speed. Its 8051-compatible 8-bit architecture is suited to embedded control tasks that benefit from a familiar instruction set and integrated programmable peripherals. The exposed-pad VFQFN construction also provides a direct thermal path from the device to the PCB when the land pattern and assembly process are designed correctly.
The part belongs to the CY8C32xx PSoC 3 family, whose configurable architecture allows software-controlled peripherals and analog blocks to support functions such as control loops, user-interface sensing, communications, and general embedded signal processing. Firmware configuration, pin routing, clocking, and peripheral allocation should be configured using the vendor-supported PSoC design and programming environment rather than inferred solely from generic 8051 assumptions.
Typical uses include compact industrial controllers, sensor-conditioning modules, building and automation controls, consumer accessories, communication peripherals, and low-cost embedded products with mixed analog and digital requirements. The 25 I/O count is particularly useful for products that need several control signals while retaining a surface-mount footprint and integrated programmable functions.
Designers should preserve the exposed-pad land pattern, follow the package-specific soldering and land-grid requirements, and provide clean supply decoupling. Firmware development also requires the correct device configuration, programming algorithm, and peripheral clock settings. The 50 MHz maximum clock specification does not mean every application block must run at 50 MHz; power, timing, and real-time behavior depend on the configured clock tree.
This page combines the exact catalog identity, memory and I/O characteristics, verified source links, package considerations, sourcing guidance, and design-oriented interpretation of the CY8C3246LTI-145. It also distinguishes confirmed drop-in alternatives from merely similar microcontrollers, helping engineers avoid assuming that different packages or proprietary peripheral configurations are interchangeable.
এর জন্য ড্রপ-ইন বিকল্প CY8C3246LTI-145 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।
বিকল্প অনুরোধ করুনCY8C3246LTI-145 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | Programmable System-on-Chip (PSoC 3) Microcontroller |
| CPU Architecture | 8051-compatible 8-bit |
| Maximum CPU Frequency | 50 MHz |
| Program Memory Size | 64 KB (64K x 8) |
| RAM Size | 8K x 8 |
| Number of I/O Pins | 25 |
| প্যাকেজ | 48-VFQFN with exposed pad |
| মাউন্টিং টাইপ | Surface mount |
| Programmable Memory Type | Flash |
| Core Bit Width | 8 bit |
| Programming Support | Supported by a QFN68 programmer device entry |
CY8C3246LTI-145 48-vfqfn with exposed pad পিন কনফিগারেশন গাইড
CY8C3246LTI-145 (48-vfqfn with exposed pad প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি CY8C3246LTI-145.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
CY8C3246LTI-145 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Conditioning, Building Automation Control, Consumer Accessory Controller, Communication Peripheral, LED and Display Control, Low-Cost Embedded Control Module.
Industrial Sensor Conditioning
The CY8C3246LTI-145 fits compact sensor-conditioning modules that require an 8-bit control core alongside programmable mixed-signal resources. Its 50 MHz processor speed provides useful headroom for sampling routines, filtering, calibration logic, and communication handling, while 64 KB of flash provides room for a substantial embedded application. The 25 available I/O pins also allow the module to connect sensors, indicators, and a host interface without requiring multiple external controller packages. Designers should configure the analog and digital blocks through the PSoC design environment, verify the selected signal-path accuracy, and keep sensitive analog traces separated from fast switching nodes.
Building Automation Control
The CY8C3246LTI-145 can serve as the controller in a compact building-automation node that reads environmental inputs, drives indicators or relays, and communicates status over a serial interface. The combination of a 50 MHz 8051-compatible core, 8K x 8 RAM, and 25 I/O pins supports multiple peripheral functions in a small PCB area. Its programmable architecture can consolidate timing, input conditioning, and output control without a separate fixed-function peripheral IC. Firmware should define startup behavior and safe output states, while the board design should include adequate bypass capacitance and protection for externally accessible connectors.
Consumer Accessory Controller
The CY8C3246LTI-145 is appropriate for programmable consumer accessories where a compact controller must manage buttons, indicators, sensors, and communication functions in one surface-mount package. Its 64 KB flash capacity supports a user interface, control logic, configuration storage, and protocol handlers, while the 25 I/O pins provide flexibility for product variants. Using programmable blocks can reduce the number of discrete input and output devices, but firmware validation must cover low-power behavior, startup conditions, and accessory-specific safety requirements. The exposed pad also needs a properly designed thermal and soldering footprint.
Communication Peripheral
The CY8C3246LTI-145 can form the control core of a protocol bridge, remote interface, or communications accessory because it combines an 8-bit 50 MHz processor with 64 KB of flash and 25 I/O pins. Firmware can implement framing, timeout handling, status reporting, and configurable I/O behavior around the supported peripherals. The exact serial interfaces and their electrical characteristics must be selected and verified in the device configuration. PCB implementation should separate interface routing from sensitive programmable analog paths, provide stable supply decoupling, and account for connector transients that may require external protection.
LED and Display Control
The CY8C3246LTI-145 is suitable for compact LED, status-indicator, and display-control products where timing, button input, and programmable I/O must coexist in a small embedded design. The 25 I/O pins can support multiple outputs and control signals, while the 50 MHz core provides capacity for animation, debouncing, calibration, and communication. The PSoC design environment can assign configurable functions to suitable pins and reduce discrete control logic. Designers must confirm the available drive strength and timing characteristics for the selected LED or display interface, then test boot behavior so outputs remain in a defined state during startup or firmware update.
Low-Cost Embedded Control Module
The CY8C3246LTI-145 works well as the primary controller in a low-cost embedded module combining local control, sensing, and host communication. The 8-bit architecture, 64 KB flash, 8K x 8 RAM, and 25 I/O pins provide a compact baseline for compact control products, while programmable functions can add application-specific behavior without expanding the footprint. A successful design should reserve memory for the bootloader and configuration data, implement watchdog and fault handling, and validate the exact programming workflow. The VFQFN exposed pad must be connected according to the manufacturer land pattern to support assembly reliability and heat removal.
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা CY8C3246LTI-145 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য |
|---|---|
| Brand | Infineon Technologies |
| Package | 48-VFQFN with exposed pad |
| Product Type | PSoC 3 Programmable System-on-Chip |
| CPU Architecture | 8051-compatible 8-bit |
| Maximum CPU Frequency | 50 MHz |
| Program Memory | 64 KB Flash (64K x 8) |
| RAM | 8K x 8 |
| Number of I/O Pins | 25 |
| Special Architecture | Programmable digital and analog resources |
| Programming Support | Listed in a CY8C3246LTI-145 QFN68 programmer device entry |
মূল পার্থক্যসমূহ
- Integrated programmable mixed-signal architecture (বনামConventional fixed-peripheral 8-bit MCU)
- Processing headroom for compact embedded control (বনামLower-frequency 8-bit MCU)
- Substantial memory for a single-chip embedded product (বনাম64-KB MCU without on-chip RAM)
ডিজাইন নোট
Use the exact package land pattern and exposed-pad drawing from the manufacturer documentation rather than a generic 48-pin QFN footprint. Confirm whether the exposed pad is electrically connected, how much paste is applied, and the required solder profile. The available records contain conflicting package descriptions, so the PCB footprint must be checked against the exact ordering code before fabrication.
Keep traces connected to programmable analog or sensitive input functions short and isolated from switching nodes and high-current return paths. Place the device-side bypass capacitor at the supply pins with a short, low-inductance connection, and route ground returns through the board's solid ground plane. Programmable routing must be reviewed in the PSoC design tool because software assignments can change which physical pins require careful layout treatment.
Do not treat the 8051-compatible core as proof that a generic 8051 firmware image or bootloader will work. PSoC-specific peripheral configuration, clock settings, interrupt routing, and the selected programming algorithm must be validated for CY8C3246LTI-145. Also verify the exact package description before ordering because one catalog record identifies a 48-VFQFN exposed-pad device while a programmer record labels the target as QFN68.
Confirm the supported supply-voltage range, current consumption, and power-sequencing requirements from the manufacturer datasheet before finalizing the power tree. Place local supply decoupling close to the device and account for transient current when configuring peripherals or driving external loads. Do not infer the operating range from a generic 8051 component, because the mixed-signal PSoC implementation can impose different electrical conditions.
কমপ্লায়েন্স তথ্য
No explicit compliance declarations are present in the product records. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer product documentation.