Infineon

CY8C3246LTI-145 - 50MHz 8-Bit PSoC 3 MCU | Infineon

Teilenummer: CY8C3246LTI-145 ✓ Aktiv
48-VFQFN with exposed pad Package 50 MHz Speed 64 KB (64K x 8) Memory
MOQ: 1 |

CY8C3246LTI-145 Übersicht

The Infineon Technologies CY8C3246LTI-145 is an 8-bit PSoC 3 programmable system-on-chip microcontroller operating at 50 MHz, with 64 KB of programmable flash memory, 8K x 8 RAM, and 25 I/O pins in a 48-VFQFN package with an exposed pad. It combines an 8051-compatible microcontroller core with programmable mixed-signal and digital resources in a single integrated device.

A PSoC 3 is a programmable system-on-chip, a category of microcontroller that integrates a CPU, programmable digital blocks, analog functions, and programmable I/O into one package. Unlike a fixed-function microcontroller, a PSoC can be configured in firmware to implement control, sensing, signal conditioning, and communication functions while reducing the number of discrete components required around the processor.

The CY8C3246LTI-145 provides 64 KB of program memory, 8K x 8 RAM, 25 I/O, and a 50 MHz operating speed. Its 8051-compatible 8-bit architecture is suited to embedded control tasks that benefit from a familiar instruction set and integrated programmable peripherals. The exposed-pad VFQFN construction also provides a direct thermal path from the device to the PCB when the land pattern and assembly process are designed correctly.

The part belongs to the CY8C32xx PSoC 3 family, whose configurable architecture allows software-controlled peripherals and analog blocks to support functions such as control loops, user-interface sensing, communications, and general embedded signal processing. Firmware configuration, pin routing, clocking, and peripheral allocation should be configured using the vendor-supported PSoC design and programming environment rather than inferred solely from generic 8051 assumptions.

Typical uses include compact industrial controllers, sensor-conditioning modules, building and automation controls, consumer accessories, communication peripherals, and low-cost embedded products with mixed analog and digital requirements. The 25 I/O count is particularly useful for products that need several control signals while retaining a surface-mount footprint and integrated programmable functions.

Designers should preserve the exposed-pad land pattern, follow the package-specific soldering and land-grid requirements, and provide clean supply decoupling. Firmware development also requires the correct device configuration, programming algorithm, and peripheral clock settings. The 50 MHz maximum clock specification does not mean every application block must run at 50 MHz; power, timing, and real-time behavior depend on the configured clock tree.

This page combines the exact catalog identity, memory and I/O characteristics, verified source links, package considerations, sourcing guidance, and design-oriented interpretation of the CY8C3246LTI-145. It also distinguishes confirmed drop-in alternatives from merely similar microcontrollers, helping engineers avoid assuming that different packages or proprietary peripheral configurations are interchangeable.

Drop-in-Alternativen für CY8C3246LTI-145 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

CY8C3246LTI-145 Grenzwerte & elektrische Eigenschaften

Product Type Programmable System-on-Chip (PSoC 3) Microcontroller
CPU Architecture 8051-compatible 8-bit
Maximum CPU Frequency 50 MHz
Program Memory Size 64 KB (64K x 8)
RAM Size 8K x 8
Number of I/O Pins 25
Gehäuse 48-VFQFN with exposed pad
Montageart Surface mount
Programmable Memory Type Flash
Core Bit Width 8 bit
Programming Support Supported by a QFN68 programmer device entry

CY8C3246LTI-145 48-vfqfn with exposed pad Pinbelegungsleitfaden

Pinbelegung für CY8C3246LTI-145 (48-vfqfn with exposed pad-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für CY8C3246LTI-145 im 48-vfqfn with exposed pad-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für CY8C3246LTI-145.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

CY8C3246LTI-145 ist geeignet für 6 Anwendungs: Industrial Sensor Conditioning, Building Automation Control, Consumer Accessory Controller, Communication Peripheral, LED and Display Control, Low-Cost Embedded Control Module.

🏭

Industrial Sensor Conditioning

The CY8C3246LTI-145 fits compact sensor-conditioning modules that require an 8-bit control core alongside programmable mixed-signal resources. Its 50 MHz processor speed provides useful headroom for sampling routines, filtering, calibration logic, and communication handling, while 64 KB of flash provides room for a substantial embedded application. The 25 available I/O pins also allow the module to connect sensors, indicators, and a host interface without requiring multiple external controller packages. Designers should configure the analog and digital blocks through the PSoC design environment, verify the selected signal-path accuracy, and keep sensitive analog traces separated from fast switching nodes.

🏭

Building Automation Control

The CY8C3246LTI-145 can serve as the controller in a compact building-automation node that reads environmental inputs, drives indicators or relays, and communicates status over a serial interface. The combination of a 50 MHz 8051-compatible core, 8K x 8 RAM, and 25 I/O pins supports multiple peripheral functions in a small PCB area. Its programmable architecture can consolidate timing, input conditioning, and output control without a separate fixed-function peripheral IC. Firmware should define startup behavior and safe output states, while the board design should include adequate bypass capacitance and protection for externally accessible connectors.

📱

Consumer Accessory Controller

The CY8C3246LTI-145 is appropriate for programmable consumer accessories where a compact controller must manage buttons, indicators, sensors, and communication functions in one surface-mount package. Its 64 KB flash capacity supports a user interface, control logic, configuration storage, and protocol handlers, while the 25 I/O pins provide flexibility for product variants. Using programmable blocks can reduce the number of discrete input and output devices, but firmware validation must cover low-power behavior, startup conditions, and accessory-specific safety requirements. The exposed pad also needs a properly designed thermal and soldering footprint.

🌐

Communication Peripheral

The CY8C3246LTI-145 can form the control core of a protocol bridge, remote interface, or communications accessory because it combines an 8-bit 50 MHz processor with 64 KB of flash and 25 I/O pins. Firmware can implement framing, timeout handling, status reporting, and configurable I/O behavior around the supported peripherals. The exact serial interfaces and their electrical characteristics must be selected and verified in the device configuration. PCB implementation should separate interface routing from sensitive programmable analog paths, provide stable supply decoupling, and account for connector transients that may require external protection.

💡

LED and Display Control

The CY8C3246LTI-145 is suitable for compact LED, status-indicator, and display-control products where timing, button input, and programmable I/O must coexist in a small embedded design. The 25 I/O pins can support multiple outputs and control signals, while the 50 MHz core provides capacity for animation, debouncing, calibration, and communication. The PSoC design environment can assign configurable functions to suitable pins and reduce discrete control logic. Designers must confirm the available drive strength and timing characteristics for the selected LED or display interface, then test boot behavior so outputs remain in a defined state during startup or firmware update.

🧩

Low-Cost Embedded Control Module

The CY8C3246LTI-145 works well as the primary controller in a low-cost embedded module combining local control, sensing, and host communication. The 8-bit architecture, 64 KB flash, 8K x 8 RAM, and 25 I/O pins provide a compact baseline for compact control products, while programmable functions can add application-specific behavior without expanding the footprint. A successful design should reserve memory for the bootloader and configuration data, implement watchdog and fault handling, and validate the exact programming workflow. The VFQFN exposed pad must be connected according to the manufacturer land pattern to support assembly reliability and heat removal.

What are the key specifications of CY8C3246LTI-145 that engineers should know?
The CY8C3246LTI-145 is an 8-bit PSoC 3 microcontroller with a 50 MHz CPU, 64 KB of flash program memory, 8K x 8 RAM, 25 I/O pins, and a 48-VFQFN package with an exposed pad. Its 8051-compatible core and programmable mixed-signal architecture place it in the embedded-control and sensor-processing category. The manufacturer datasheet is the controlling reference for voltage limits, clock configuration, peripheral assignments, package dimensions, and programming requirements.
What is the operating voltage of CY8C3246LTI-145?
The operating-voltage limits for the CY8C3246LTI-145 are not stated in the available product records, so use the manufacturer datasheet before designing the power supply or connecting external signals. The confirmed catalog characteristics are its 8-bit CPU, 50 MHz maximum operating speed, 64 KB flash, 8K x 8 RAM, and 25 I/O pins. In particular, do not assume that the voltage range of a generic 8051 device applies to this PSoC 3.
Where can I download the CY8C3246LTI-145 datasheet PDF?
The CY8C3246LTI-145 datasheet is accessible through the linked manufacturer-hosting document page at AllDataSheet, which identifies the exact CY8C3246LTI-145 device and links to its PDF documentation. Use the document pin-description table to assign PCB signals because the available records confirm the package and I/O count but do not reproduce all 68 physical positions or the exposed-pad connection. Also consult the exact Infineon product documentation for current revision details.
Where can I find the CY8C3246LTI-145 pinout?
The CY8C3246LTI-145 pinout must be taken from the exact manufacturer datasheet rather than a generic QFN drawing. The product records identify a VFQFN package with an exposed pad, while a separate programmer entry labels the device as QFN68, so the physical-pin and exposed-pad details require careful cross-checking before PCB routing. Use the pin-description table and land-pattern drawing for the exact ordering code and package revision.
How much memory does the CY8C3246LTI-145 have?
The CY8C3246LTI-145 contains 64 KB, organized as 64K x 8, of flash program memory and 8K x 8 RAM. Flash supports nonvolatile firmware storage, while RAM provides volatile working memory for execution, data, and stack operations. These are the confirmed memory figures for the exact MPN; application firmware must also allow for interrupt vectors, peripheral configuration tables, boot code, and any bootloader space.
What can replace the CY8C3246LTI-145?
No verified drop-in replacement for the CY8C3246LTI-145 can be confirmed from the available cross-reference records. A functional 8-bit MCU with similar flash and RAM is not automatically a drop-in replacement because the PSoC 3 peripheral architecture, clock tree, programming configuration, package land pattern, and exposed pad must also match. Treat the target MPN as a device-specific design until an exact-package, pin-compatible candidate is validated against both the schematic and firmware.
Is the CY8C3246LTI-145 the same as a generic 8051 microcontroller?
No, the CY8C3246LTI-145 is not interchangeable with a generic 8051 solely because its CPU is 8051-compatible. It is a PSoC 3 device with 64 KB of flash, 8K x 8 RAM, 25 I/O pins, and integrated programmable mixed-signal resources managed through a PSoC-specific design environment. Existing 8051 source may provide a useful starting point, but register definitions, peripheral routing, interrupts, clocks, and board behavior require review.
Where to buy CY8C3246LTI-145 online?
Use the Request a Quote form on this page to request CY8C3246LTI-145 availability, order quantities, and current commercial terms. The exact MPN appears in current distributor catalogs and an Octopart listing, confirming that it is an orderable catalog device. Before placing an order, state the required packaging, production quantity, and traceability needs so the quotation reflects the correct suffix and delivery requirements.
What is the price of CY8C3246LTI-145?
The current commercial price for CY8C3246LTI-145 should be obtained through the Request a Quote form on this page because quotations can vary with quantity, packaging, and supply conditions. No qualifying quantity-break table is available for the exact MPN, so a static unit figure would not reliably represent current availability. Submit the required quantity and target date with the request to obtain a current quotation.
What is the lead time for CY8C3246LTI-145?
Request the current CY8C3246LTI-145 lead time through the Request a Quote form on this page and include your required quantity, assembly schedule, and approved vendor list requirements. Current distributor catalogs show the device, but catalog presence alone does not establish factory lead time or guaranteed stock for a production lot. For new designs, treat procurement timing as a quote-dependent constraint until the manufacturer confirms allocation.
Is CY8C3246LTI-145 in stock?
The current stock position for CY8C3246LTI-145 is not fixed by the available catalog records and may change by package, quantity, and region. Use the Request a Quote form on this page for a current availability response instead of relying on a static listing status. Include the required reel or tube quantity, date code preference, and production schedule to allow the order to be matched efficiently.
When should I choose the CY8C3246LTI-145 over a conventional MCU?
Choose the CY8C3246LTI-145 when an 8051-compatible control core plus programmable mixed-signal and digital functions can reduce external circuitry in a compact embedded design. Its confirmed 50 MHz speed, 64 KB flash, 8K x 8 RAM, and 25 I/O pins support control-oriented products with several external signals. Prefer a conventional MCU when its simpler peripheral model, ecosystem, or package is a stronger project requirement.
Is the CY8C3246LTI-145 suitable for industrial control and sensor modules?
The CY8C3246LTI-145 is suitable for many embedded control and sensor-conditioning concepts because it combines an 8-bit 50 MHz processor with programmable resources, 25 I/O pins, and 64 KB of flash in one package. Suitability for a particular industrial product still depends on temperature rating, supply voltage, electromagnetic requirements, and functional safety needs. Those qualification details are not established by the available product records and must be checked in the manufacturer documentation.
What is the best cross-brand equivalent for CY8C3246LTI-145?
No cross-brand equivalent can be responsibly identified as a drop-in replacement for the CY8C3246LTI-145 from the available records. The device combines an exact 8051-compatible execution environment with PSoC-specific programmable peripherals, so an MCU with matching clock speed and memory may still require different software, pin mapping, and peripheral initialization. Request a candidate cross-reference with its exact package drawing and pin table, then validate it against the target design before considering substitution.
CY8C3246LTI-145 vs a similarly rated MCU - which is better for a mixed-signal product?
The CY8C3246LTI-145 is generally better suited when firmware-driven configuration of both digital and analog blocks provides measurable board-level value. A similarly rated conventional MCU may be preferable when the application already uses stable, supported peripherals and changing the PSoC design environment would create unnecessary software work. Compare peripheral behavior, clock-tree requirements, exposed-pad construction, development-tool compatibility, and board reuse rather than comparing only CPU frequency and memory capacity.

Technische Referenzdaten für CY8C3246LTI-145 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the CY8C3246LTI-145 when an embedded product benefits from an 8051-compatible control core, configurable digital and analog resources, 64 KB of flash, and 25 I/O pins in one compact package. It is particularly attractive when firmware-configurable behavior can replace several discrete peripheral devices. Verify the exact 48-VFQFN land pattern, exposed-pad treatment, supply limits, temperature grade, and programming setup before committing the PCB. Do not select a conventional MCU solely because it has the same clock speed and memory: PSoC peripherals, registers, interrupt routing, and development tools differ. Likewise, do not approve a cross-brand substitute without confirming pin-level compatibility and software equivalence. This recommendation applies to industrial, automation, communications, consumer-accessory, display-control, and compact sensor-module designs that benefit from configurable mixed-signal behavior.

Vergleich mit Alternativen

Parameter Dieses Produkt
Brand Infineon Technologies
Package 48-VFQFN with exposed pad
Product Type PSoC 3 Programmable System-on-Chip
CPU Architecture 8051-compatible 8-bit
Maximum CPU Frequency 50 MHz
Program Memory 64 KB Flash (64K x 8)
RAM 8K x 8
Number of I/O Pins 25
Special Architecture Programmable digital and analog resources
Programming Support Listed in a CY8C3246LTI-145 QFN68 programmer device entry

Wichtigste Unterscheidungsmerkmale

  • Integrated programmable mixed-signal architecture (vs. Conventional fixed-peripheral 8-bit MCU)
  • Processing headroom for compact embedded control (vs. Lower-frequency 8-bit MCU)
  • Substantial memory for a single-chip embedded product (vs. 64-KB MCU without on-chip RAM)

Designhinweise

Use the exact package land pattern and exposed-pad drawing from the manufacturer documentation rather than a generic 48-pin QFN footprint. Confirm whether the exposed pad is electrically connected, how much paste is applied, and the required solder profile. The available records contain conflicting package descriptions, so the PCB footprint must be checked against the exact ordering code before fabrication.

Keep traces connected to programmable analog or sensitive input functions short and isolated from switching nodes and high-current return paths. Place the device-side bypass capacitor at the supply pins with a short, low-inductance connection, and route ground returns through the board's solid ground plane. Programmable routing must be reviewed in the PSoC design tool because software assignments can change which physical pins require careful layout treatment.

Do not treat the 8051-compatible core as proof that a generic 8051 firmware image or bootloader will work. PSoC-specific peripheral configuration, clock settings, interrupt routing, and the selected programming algorithm must be validated for CY8C3246LTI-145. Also verify the exact package description before ordering because one catalog record identifies a 48-VFQFN exposed-pad device while a programmer record labels the target as QFN68.

Confirm the supported supply-voltage range, current consumption, and power-sequencing requirements from the manufacturer datasheet before finalizing the power tree. Place local supply decoupling close to the device and account for transient current when configuring peripherals or driving external loads. Do not infer the operating range from a generic 8051 component, because the mixed-signal PSoC implementation can impose different electrical conditions.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No explicit compliance declarations are present in the product records. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer product documentation.

Daten verifiziert am: 2026-11-15 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

CY8C3246LTI-145 datasheet CY8C3246LTI-145 pinout CY8C3246LTI-145 datasheet pdf CY8C3246LTI-145 specifications CY8C3246LTI-145 50MHz CY8C3246LTI-145 64KB flash CY8C3246LTI-145 QFN68 CY8C3246LTI-145 VFQFN footprint CY8C3246LTI-145 equivalent CY8C3246LTI-145 replacement CY8C3246LTI-145 programmer Infineon CY8C3246LTI-145 CY8C3246LTI-145 price CY8C3246LTI-145 stock What is CY8C3246LTI-145

Verwandte Bauteile & Begriffe

Infineon Technologies CY8C3246LTI-145 CY8C32xx PSoC 3 programmable system-on-chip 8051-compatible architecture 8-bit microcontroller 50 MHz 64 KB flash 8K x 8 RAM 25 I/O 48-VFQFN exposed pad surface-mount package microcontroller semiconductor mixed-signal programmable peripheral embedded control sensor conditioning industrial automation
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen