CY8C3444AXI-117 - 8-Bit 50MHz PSoC 3 MCU | Infineon
MPN: CY8C3444AXI-117 ✓ সক্রিয়CY8C3444AXI-117 সারাংশ
A programmable system-on-chip is a microcontroller architecture that integrates a CPU, flash memory, analog conversion resources, digital programmable blocks, and communication peripherals into one device. In the broader semiconductor hierarchy, PSoC 3 belongs to the microcontroller family and extends the conventional 8-bit MCU with configurable signal-processing and interface blocks. Its software-programmable architecture makes it useful when design flexibility, component count, and embedded control performance are more important than using a fixed-function peripheral arrangement.
Key features include an 8-bit 8051-compatible processing core operating at 50 MHz, 16 KB of flash program memory, and a 100-TQFP industrial-temperature package. The integrated PSoC 3 architecture supports configurable analog and digital functions rather than fixing every peripheral connection in silicon. This flexibility can shorten development cycles, simplify board partitioning, and allow control, interface, and signal-conditioning functions to be consolidated in a single package.
The 50 MHz operating frequency provides timing headroom for interrupt-driven control, communication, state-machine processing, and low-bandwidth data acquisition. The 16 KB flash capacity is suitable for boot code, application firmware, calibration constants, and configuration tables. Because the target uses a 100-pin package, designers have access to a substantially larger pin complement than an 8-bit or 16-pin MCU, supporting external interfaces and dedicated peripheral routing while requiring careful high-density PCB layout.
Typical uses include industrial control panels, sensor-conditioning systems, embedded data-acquisition equipment, communications modules, and compact consumer appliances. The PSoC architecture is especially applicable when analog inputs, programmable digital logic, timers, and serial communication must coexist in a cost-conscious embedded platform. Firmware can configure the peripheral blocks during initialization, reducing the need for separate glue logic and allowing product behavior to be adjusted without changing the PCB.
The primary design consideration is PCB implementation. A 100-TQFP device requires adequate escape routing between fine-pitch leads, careful decoupling near the supply pins, and a pin assignment that keeps sensitive analog inputs away from fast digital or switching nodes. Firmware developers should also verify clock, interrupt, analog-reference, and peripheral-sharing constraints in the manufacturer pin-description and configuration tables before committing the board layout.
This page combines the exact orderable-device information, package characteristics, application guidance, and design considerations needed to evaluate CY8C3444AXI-117. It also highlights the limits of direct substitution by explaining that MCU replacements require validation of pin mapping, memory capacity, peripheral configuration, clock resources, and software compatibility rather than package appearance alone.
এর জন্য ড্রপ-ইন বিকল্প CY8C3444AXI-117 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
CY8C3444AXA-117
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
CY8C3445AXI-117
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
CY8C3446AXI-117
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
CY8C3447AXI-117
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
CY8C3441AXI-117
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
CY8C3444AXI-117 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | PSoC 3 flash-programmable system-on-chip microcontroller |
| Processor Architecture | 8051-compatible 8-bit core |
| Maximum CPU Frequency | 50 MHz |
| Flash Memory | 16 KB (16K x 8) |
| প্যাকেজ | 100-TQFP (14 x 14 mm) |
| পিন সংখ্যা | 100 pins |
| মাউন্টিং টাইপ | Surface-mount gull-wing package |
| Temperature Grade | Industrial |
| Programmable Architecture | PSoC 3 with configurable analog and digital blocks |
| CPU Word Size | 8 bits |
| Flash Organization | 16K x 8 bits |
CY8C3444AXI-117 100-tqfp (14 x 14 mm) পিন কনফিগারেশন গাইড
CY8C3444AXI-117 (100-tqfp (14 x 14 mm) প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি CY8C3444AXI-117.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
CY8C3444AXI-117 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Conditioning, Embedded Data Acquisition, Communications Gateway, Smart Appliance Control, Programmable Logic Control, Compact Test and Measurement Instrument.
Industrial Sensor Conditioning
The CY8C3444AXI-117 fits compact sensor-conditioning modules that must acquire, filter, and interpret low-bandwidth analog signals without relying on several separate controllers. Its 50 MHz 8051-compatible core provides timing headroom for calibration routines, digital filtering, status reporting, and communications, while the PSoC 3 architecture places configurable analog and digital blocks alongside the processor. The 16 KB flash budget can hold the application firmware, parameter tables, and calibration constants. A 100-pin package also exposes substantially more signal-routing options than a small MCU, although it demands careful escape routing and local supply decoupling. Engineers should partition analog and digital circuitry carefully and validate the final peripheral allocation in the manufacturer configuration tables.
সুপারিশকৃত
Embedded Data Acquisition
The CY8C3444AXI-117 is suited to data-acquisition equipment that combines sensor inputs, digital filtering, local storage, and a host interface in one embedded controller. The 50 MHz 8-bit processor can service interrupts, timers, and protocol handling while the programmable PSoC 3 blocks implement the required analog and digital signal path. Its 16 KB of flash supports acquisition firmware, configuration descriptors, and calibration records without requiring an external memory device for modest code sizes. For synchronized measurements, designers can use programmable timers and interrupts to establish deterministic sampling intervals. The principal engineering trade-off is that firmware and scratch data must be sized carefully, and the 100-pin footprint requires careful high-density PCB routing.
সুপারিশকৃত
Communications Gateway
The CY8C3444AXI-117 can serve as the local controller in a communications gateway that must translate between sensors, actuators, and an external serial link. Its 50 MHz 8051-compatible core provides sufficient clock headroom for protocol handling, buffer management, state machines, and diagnostic reporting, while configurable PSoC 3 digital blocks can offload deterministic logic from the CPU. Sixteen kilobytes of flash is appropriate for gateway firmware, protocol tables, and configuration records when the application does not require large local logs or rich graphical interfaces. The 100-pin package offers more peripheral choices for UART, timers, interrupts, and status signals than a low-pin-count MCU. Designers should verify the exact serial peripheral instance, pin mapping, and interrupt vectors in the manufacturer documentation.
সুপারিশকৃত
Smart Appliance Control
The CY8C3444AXI-117 fits smart-appliance control boards that coordinate user inputs, motors, relays, displays, and safety-related state monitoring. Its 50 MHz 8-bit core can execute the main control loop and service timed events, while configurable digital logic supports deterministic interlocks and input filtering. The 16 KB flash capacity is useful for compact control firmware, lookup tables, and configuration parameters, although products requiring extensive product variants or graphical assets may need a higher-memory family member. The 100-pin package provides ample connectivity for control outputs and communication interfaces, but engineers must maintain separation between sensitive measurement circuits and switching nodes. Firmware should include startup defaults and safe output states before enabling actuators.
সুপারিশকৃত
Programmable Logic Control
The CY8C3444AXI-117 is appropriate for control products that need programmable logic alongside a conventional microcontroller core. Instead of implementing every timing or combinatorial function in CPU code, designers can configure PSoC 3 digital blocks to perform deterministic operations and use the 50 MHz 8051-compatible processor for supervisory logic and communications. This division of labor can improve responsiveness in applications involving multiple interlocks, counters, pulse generation, or sampled decision logic. The 16 KB flash capacity limits the total firmware footprint, so developers should include block-configuration code, diagnostics, and application logic in the memory budget. A 100-pin package makes signal assignment flexible but requires a disciplined ground, decoupling, and routing strategy to prevent digital activity from disturbing analog or timing-sensitive nodes.
সুপারিশকৃত
Compact Test and Measurement Instrument
The CY8C3444AXI-117 can serve as the control processor in a compact measurement instrument that combines signal conditioning, timing, display updates, and host communication. Its configurable analog and digital resources allow a designer to implement a measurement-specific signal path, while the 50 MHz 8-bit core handles calibration, menu logic, data formatting, and external control. Sixteen kilobytes of flash can support a focused firmware image, reference values, and instrument configuration, making the device suitable for a dedicated rather than highly extensible platform. The 100-pin package provides enough connections for external references, communication interfaces, controls, and indicators. Precision performance still depends on the selected analog block, reference source, layout, and calibration method, so engineers should follow the manufacturer application guidance for the specific peripheral configuration.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা CY8C3444AXI-117 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | CY8C3444AXA-117 | CY8C3445AXI-117 | CY8C3446AXI-117 | CY8C3447AXI-117 | CY8C3441AXI-117 |
|---|---|---|---|---|---|---|
| Package | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Processor Architecture | 8051-compatible 8-bit core | 8051-compatible 8-bit core | 8051-compatible 8-bit core | 8051-compatible 8-bit core | 8051-compatible 8-bit core | 8051-compatible 8-bit core |
| Maximum CPU Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Flash Memory | 16 KB | 16 KB | 32 KB | 64 KB | 128 KB | 8 KB |
| Flash Organization | 16K x 8 bits | 16K x 8 bits | 32K x 8 bits | 64K x 8 bits | 128K x 8 bits | 8K x 8 bits |
| Product Family | PSoC 3 | PSoC 3 | PSoC 3 | PSoC 3 | PSoC 3 | PSoC 3 |
| Pin Count | 100 pins | 100 pins | 100 pins | 100 pins | 100 pins | 100 pins |
| Programmable Peripheral Architecture | Configurable analog and digital blocks | Configurable analog and digital blocks | Configurable analog and digital blocks | Configurable analog and digital blocks | Configurable analog and digital blocks | Configurable analog and digital blocks |
মূল পার্থক্যসমূহ
- Exact 16 KB flash configuration (বনামCY8C3445AXI-117)
- Lower flash-memory requirement within the same family (বনামCY8C3447AXI-117)
- More program storage than the lower-capacity CY8C3441 variant (বনামCY8C3441AXI-117)
ডিজাইন নোট
Route the 100-pin TQFP with a footprint matching the manufacturer's 14 x 14 mm pin geometry and pin numbering. Use vias, through leads, or fanout features to escape fine-pitch pads without creating accidental shorts. Confirm exposed-pad or thermal requirements directly from the package drawing, and avoid placing test pads between pads unless their spacing and probe clearance are validated.
Place the required supply bypass capacitors close to their associated device pins and keep the return path short through nearby ground-plane connections. Separate noisy digital return paths from sensitive analog references where the board architecture permits. Confirm capacitor voltage ratings, operating voltage limits, and startup requirements in the manufacturer electrical-characteristics table before releasing the schematic.
Assign analog, clock, and programmable-block signals during schematic capture, then preserve those assignments during layout. Keep switching nodes and high-current outputs away from sensor inputs and references. Use a continuous ground reference under the device where practical, and review every no-connect and alternate-function pin in the manufacturer pin-description table because the 100-pin package exposes more configuration choices than a small MCU.
Do not treat another CY8C34xx member as interchangeable merely because it uses a similar 100-pin package. Compare flash size, memory map, peripheral allocation, interrupt vectors, clock configuration, boot behavior, and every used pin. Firmware intended for a 16 KB CY8C3444 may require linker and boot changes when moved to a member with 32, 64, or 128 KB of flash.
Perform a board-level thermal check for the selected PSoC configuration because switching activity, digital-block utilization, and the ambient environment affect dissipated power. Use the manufacturer power-consumption guidance to estimate activity-dependent current, then confirm that the PCB copper and surrounding components keep the device within its rated junction-temperature limits. Avoid presenting an estimate as a guaranteed maximum performance figure.
কমপ্লায়েন্স তথ্য
The product page information identifies an industrial-grade 100-pin MCU but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these attributes using the manufacturer product declaration or material-compliance documentation for the exact orderable MPN.