Infineon

CY8C3445AXA-104 - 50MHz 8051 MCU, 32KB Flash | Infineon

MPN: CY8C3445AXA-104 ✓ সক্রিয়
1.71 V to 5.5 V Vdss 100-pin TQFP Package 50 MHz Speed 32 KB (32K x 8) Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

CY8C3445AXA-104 সারাংশ

The Infineon CY8C3445AXA-104 is an 8-bit PSoC 3 CY8C34-family microcontroller with a 50 MHz 8051 core, 32 KB of embedded flash memory, and a 100-pin TQFP package measuring 14 x 14 mm. It combines a programmable system-on-chip architecture with microcontroller peripherals, flash-backed firmware storage, and a broad supply-voltage range of 1.71 V to 5.5 V.

A PSoC microcontroller is a programmable system-on-chip that integrates a CPU core, programmable digital and analog resources, memory, and dedicated peripherals into one mixed-signal device. In the product hierarchy, the CY8C3445AXA-104 is an MCU based on the 8-bit 8051 instruction set. Its PSoC architecture allows designers to use configurable blocks for digital functions, analog conversions, and control tasks rather than relying on a fixed collection of unrelated peripheral functions.

The primary operating characteristics include an 8-bit architecture, clock operation up to 50 MHz, 32 KB of flash organized as 32K x 8, and 4 KB of SRAM for the CY8C3445 family configuration. The 100-TQFP package provides a large number of external I/O connections compared with smaller microcontroller packages. The listed operating range of 1.71 V to 5.5 V supports both low-voltage and conventional 5 V system rails.

The CY8C34 architecture includes a single-core 8051 processor, dual datapointers, four flash-protection levels, 1 KB of data EEPROM, 8 KB of ECC flash, and an interrupt controller with 27 sources and eight priority levels. A Peripheral Hub Unit provides eight parallel access paths, allowing programmable digital, analog, and timing resources to exchange data with the CPU without treating every function as a separate peripheral outside the hub.

Typical applications include industrial control panels, compact sensor-hub controllers, keypad interfaces, LED status and signaling systems, consumer appliances, data-acquisition modules, and embedded control boards requiring a mix of digital I/O and programmable analog behavior. The large TQFP footprint is particularly useful when a design needs extensive parallel I/O rather than the smallest possible board area.

When designing around the CY8C3445AXA-104, preserve the voltage ratings, oscillator requirements, programming interface, and decoupling expectations defined in the manufacturer datasheet. Because this is a mixed-signal PSoC, unused analog and digital blocks should be configured deliberately rather than left unused, and PCB routing should account for the pin arrangement and exposed power requirements of the 100-pin package.

This page combines the exact ordering information, parametric context, compatible family references, and application-oriented design guidance for the CY8C3445AXA-104. It also identifies where a complete 100-pin assignment, programming procedure, and lifecycle decision require the manufacturer documentation rather than relying on abbreviated catalog summaries.

এর জন্য ড্রপ-ইন বিকল্প CY8C3445AXA-104 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

CY8C3445AXI-104

✅ ড্রপ-ইন
📦 100-TQFP (14x14 mm)
Same 50 MHz clock and 32 KB flash rating, representing 0% difference in those listed parameters; ordering suffix differs

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

CY8C3445AXE-104

✅ ড্রপ-ইন
📦 100-TQFP (14x14 mm)
Same 50 MHz clock, 32 KB flash, and 100-TQFP footprint, representing 0% difference in those listed parameters; ordering suffix differs

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

CY8C3445AXC-104

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 100-TQFP (14x14 mm)
Same-family 50 MHz and 32 KB core ratings, representing 0% difference in those listed parameters; suffix-specific configuration differs

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

CY8C3446AXA-104

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 100-TQFP (14x14 mm)
Same 50 MHz clock and 100-TQFP package, representing 0% difference in those listed parameters; family resource configuration differs

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

CY8C3447AXA-104

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 100-TQFP (14x14 mm)
Same 50 MHz clock and 100-TQFP package, representing 0% difference in those listed parameters; peripheral configuration differs

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

CY8C3445AXA-104 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type 8-bit PSoC 3 CY8C34-family microcontroller
CPU Architecture 8051, 8-bit
সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি 50 MHz
Program Flash Memory 32 KB (32K x 8)
SRAM 4 KB
Data EEPROM 1 KB
ECC Flash 8 KB
Operating Voltage Range 1.71 V to 5.5 V
Flash Protection Levels 4 levels
Interrupt Sources 27 sources
Interrupt Priority Levels 8 levels
Data Pointers 2
Peripheral Hub Access Paths 8 parallel paths
প্যাকেজ 100-pin TQFP
Package Body Size 14 x 14 mm
মাউন্টিং টাইপ Surface mount
CPU Core Count 1 core

CY8C3445AXA-104 14 x 14 mm পিন কনফিগারেশন গাইড

CY8C3445AXA-104 (14 x 14 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

CY8C3445AXA-104-এর জন্য 14 x 14 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি CY8C3445AXA-104.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

CY8C3445AXA-104 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control Panels, Sensor Hub and Data Acquisition, LED Lighting and Signage, Consumer Appliance Interfaces, Communication Equipment Interfaces, Security and Access Control.

🏭

Industrial Control Panels

The CY8C3445AXA-104 fits industrial control panels that combine many digital inputs with programmable signal handling. Its 100-pin TQFP package exposes substantially more I/O than a compact microcontroller package, while the 50 MHz 8051 core provides useful control-loop and user-interface processing headroom. The 1.71 V to 5.5 V operating range supports low-voltage logic systems as well as conventional 5 V industrial electronics. Programmable PSoC resources can also consolidate input conditioning, timing, and dedicated interface behavior. Before finalizing the design, verify the exact suffix temperature rating, power sequencing, analog accuracy, and peripheral assignments required by the panel architecture.

🧩

Sensor Hub and Data Acquisition

The CY8C3445AXA-104 is suitable for a compact sensor-hub controller that gathers digital measurements and coordinates mixed-signal functions. Its PSoC 3 architecture combines an 8051 processor with programmable peripheral resources, while 32 KB of flash provides dedicated space for acquisition firmware and 4 KB of SRAM supports active data handling. The 100-pin package provides a practical route to external sensors, logic converters, and communication transceivers. At 50 MHz, the MCU can service interrupts and peripheral transfers without monopolizing the CPU. Designers should allocate pins using the exact family pin table and verify that each analog or digital PSoC block remains valid at the selected operating voltage.

💡

LED Lighting and Signage

The CY8C3445AXA-104 can control multi-channel LED lighting, status indicators, and programmable signage because its 100-pin package offers many external I/O options for drivers and control logic. The 50 MHz 8051 core can execute dimming sequences, button handling, fault monitoring, and communication updates, while the PSoC peripheral hub provides configurable timing and digital resources. A 1.71 V to 5.5 V operating range allows the controller to share a regulated rail with compatible logic. Current limits, LED drive topology, and PWM timing must be checked against the exact device documentation. Off-board constant-current drivers are preferable when an LED load would exceed the MCU pin or supply capability.

🔧

Consumer Appliance Interfaces

The CY8C3445AXA-104 suits consumer appliance control boards that need a combination of user inputs, display controls, motor or relay signaling, and embedded programmable logic. Its 32 KB flash accommodates application firmware, 4 KB of SRAM supports working state, and the 8051 core operates up to 50 MHz for responsive control. The broad 100-pin footprint offers enough connectivity for keypad scanning, sensor interfaces, and status signaling without requiring a large external glue-logic device. Use the PSoC configuration to allocate only the timers, counters, and serial functions the appliance actually needs. Validate restart behavior, brownout handling, and temperature limits for the target appliance environment before production approval.

🌐

Communication Equipment Interfaces

The CY8C3445AXA-104 can serve as the host controller for compact communication equipment, including protocol bridges, keypad terminals, and configurable interface modules. Its 50 MHz 8051 core, interrupt system with 27 sources, and eight peripheral access paths support simultaneous handling of serial traffic and real-time control functions. The 100-pin TQFP package provides connections for transceivers, status indicators, configuration inputs, and debug programming. Because the device is a mixed-signal MCU, engineers should use dedicated I/O routing for communication signals and review signal-integrity requirements, pull resistors, and clocking in the family hardware design guidance. Keep firmware compatible with the exact selected suffix and verify supported baud-rate conditions.

🎥

Security and Access Control

The CY8C3445AXA-104 is appropriate for compact access-control modules that coordinate credential readers, request-to-exit inputs, door contacts, relays, and local status feedback. Its 32 KB flash stores application and configuration code, while 4 KB of SRAM supports protocol buffers and short-lived working data. The extensive 100-pin interface capability allows the controller to consolidate several digital functions around one MCU, and the PSoC programmable blocks can support timing and communication tasks. Security-critical designs should add the appropriate external protection and ensure that authentication, credential storage, and update procedures meet the product's threat model. Validate the exact suffix grade, watchdog behavior, boot configuration, and programming access controls before field deployment.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

CY8C3445AXI-104 Same-family control MCU candidate ব্যবহৃত হয়: Industrial Control Panels, Sensor Hub and Data Acquisition, Consumer Appliance Interfaces, Security and Access Control CY8C3445AXE-104 Same-package family reference ব্যবহৃত হয়: Industrial Control Panels, Consumer Appliance Interfaces, Security and Access Control CY8C3446AXA-104 Related PSoC 3 controller family option ব্যবহৃত হয়: Sensor Hub and Data Acquisition, Communication Equipment Interfaces CY8C3445AXC-104 Same-family programmable lighting controller ব্যবহৃত হয়: LED Lighting and Signage CY8C3447AXA-104 Related PSoC 3 family variant ব্যবহৃত হয়: LED Lighting and Signage, Communication Equipment Interfaces
What is the CY8C3445AXA-104?
The CY8C3445AXA-104 is an Infineon PSoC 3 CY8C34-family 8-bit microcontroller operating up to 50 MHz with 32 KB of flash, 4 KB of SRAM, and a 100-pin TQFP package. According to the Infineon CY8C34xxx product information, it uses an 8051 CPU and belongs to the mixed-signal PSoC 3 family. The 14 x 14 mm package provides extensive I/O for embedded control and data-acquisition designs.
What are the key specifications of CY8C3445AXA-104 that engineers should know?
The key CY8C3445AXA-104 specifications are a 50 MHz maximum clock, an 8-bit 8051 core, 32 KB of program flash, 4 KB of SRAM, and a 1.71 V to 5.5 V operating range. Infineon describes the device as a PSoC 3 CY8C34-family MCU in a 100-pin TQFP package. Additional family features include 1 KB of data EEPROM, 8 KB of ECC flash, 27 interrupt sources, and eight priority levels.
Where can I download the CY8C3445AXA-104 datasheet PDF?
The CY8C3445AXA-104 datasheet PDF can be reached through the Octopart document page linked on this product page, while Infineon provides family-level documentation and ordering information. Use the manufacturer PDF for final pin assignments, electrical limits, programming requirements, timing diagrams, and package drawings. The abbreviated distributor listings confirm the 50 MHz, 32 KB, and 100-TQFP identity but are not a substitute for the complete technical manual.
Where can I find the CY8C3445AXA-104 pinout?
The CY8C3445AXA-104 pinout is found in the pin-description and package-drawing sections of the Infineon CY8C34xxx family documentation. The device is packaged in a 100-pin TQFP measuring 14 x 14 mm. Assign every power, ground, programming, reset, clock, and I/O signal from that pin table before laying out the PCB, because the abbreviated catalog result does not reproduce the complete 100-pin assignment.
What is the operating voltage of CY8C3445AXA-104?
The CY8C3445AXA-104 operates from 1.71 V to 5.5 V according to the Infineon and Mouser product descriptions for the CY8C3445 device family. This range supports low-voltage digital systems and conventional 5 V equipment, but each peripheral and internal block may have additional operating conditions. Check the corresponding electrical-characteristics table in the manufacturer datasheet before defining the system power architecture.
How much flash and SRAM does CY8C3445AXA-104 have?
The CY8C3445AXA-104 has 32 KB of flash, organized as 32K x 8, and 4 KB of SRAM for the matching CY8C3445 family configuration. Infineon also identifies 1 KB of data EEPROM and 8 KB of ECC flash as additional memory resources. The flash supports four protection levels, which is useful when separating bootloader, application, and update regions.
Is CY8C3445AXA-104 suitable for industrial control applications?
The CY8C3445AXA-104 is suitable for many industrial control applications that fit its 50 MHz 8051 core, 32 KB flash, 4 KB SRAM, and extensive 100-pin I/O capability. Its 1.71 V to 5.5 V range is useful for mixed industrial voltage rails. Final suitability depends on the device's specified temperature grade and any application-specific qualification requirements, which should be confirmed in the manufacturer documentation.
What is the best drop-in replacement for CY8C3445AXA-104?
CY8C3445AXI-104 is the closest listed drop-in candidate because it retains the same CY8C3445 identity, 50 MHz 8051 core, 32 KB flash, 4 KB SRAM, 100-pin TQFP package, and 14 x 14 mm body size. Review the ordering code, temperature grade, production configuration, and programmer settings before approving it. Firmware and qualification requirements can still make a mechanically compatible part unsuitable for a released design.
Can CY8C3445AXI-104 replace CY8C3445AXA-104?
CY8C3445AXI-104 can be considered as a pin-compatible replacement candidate for CY8C3445AXA-104 because both are CY8C3445 devices in the same 100-pin TQFP package with matching 50 MHz and 32 KB flash ratings. The ordering suffix must still be reviewed for temperature grade, packing, and production configuration. Confirm the exact suffix mapping and device identification settings with Infineon before a design release.
What can replace CY8C3445AXA-104?
The available replacement path starts with CY8C3445AXI-104, a same-family 100-TQFP device listed with the same 50 MHz 8051 core, 32 KB flash, and 4 KB SRAM. CY8C3445AXE-104 is another same-package family reference. Neither should be treated as an automatic substitution: compare suffix-specific temperature ratings, packing, boot configuration, qualification, and programming requirements before procurement.
What is the best Infineon equivalent for CY8C3445AXA-104?
The best Infineon equivalent candidate is CY8C3445AXI-104 because it preserves the CY8C3445 silicon family, 50 MHz operation, 32 KB flash, 4 KB SRAM, and 100-pin TQFP footprint. Its package and listed core resources therefore align closely with the target. The remaining decision depends on the specific suffix characteristics and qualification requirements of the installed design.
CY8C3445AXA-104 vs CY8C3445AXI-104 - which is better for a new design?
CY8C3445AXI-104 is the better-supported candidate when a new design requires the same 50 MHz 8051 core, 32 KB flash, 4 KB SRAM, and 100-pin TQFP package as CY8C3445AXA-104. The published technical summaries do not establish every suffix-specific difference, so selection should follow a comparison of temperature grade, packing, lifecycle status, and programming requirements rather than the visible core specifications alone.
When should I choose CY8C3445AXA-104 over another CY8C3445 option?
Choose CY8C3445AXA-104 when the specified ordering code, 50 MHz operating requirement, 32 KB flash allocation, 4 KB SRAM budget, and 100-pin TQFP layout match an existing or newly released design. Retaining the exact ordering code is appropriate when its suffix-specific grade and packing are validated. Switching to another CY8C3445 variant is useful only after confirming its pinout, configuration, qualification, and programming compatibility.
Where can I buy CY8C3445AXA-104 online?
Use the Request a Quote form on this page to ask for CY8C3445AXA-104 availability, lead time, and order handling. The form supports sourcing without embedding a static quote that may quickly become stale. For technical confirmation, request the exact manufacturer ordering information and datasheet corresponding to the CY8C3445AXA-104 suffix before releasing a purchase order.
What is the price of CY8C3445AXA-104?
The current price for CY8C3445AXA-104 is handled through the Request a Quote form on this page. A submitted request should identify the exact MPN, required quantity, shipment destination, and packaging preference so the commercial response reflects the correct configuration. Price and inventory can change, making a request more appropriate than an unverified fixed figure.
Is CY8C3445AXA-104 in stock and what is its lead time?
Current CY8C3445AXA-104 stock and lead time should be requested through the Request a Quote form on this page. The exact suffix, quantity, and shipment destination determine the most useful commercial response. For production planning, also confirm whether the manufacturer classifies the selected ordering code as active and whether any pack-form or lead-time constraints apply.
What programming tools and interfaces are compatible with CY8C3445AXA-104?
The CY8C3445AXA-104 uses the programming facilities defined for the Infineon PSoC 3 CY8C34 family. Exact programming voltage, signal names, protocol steps, and supported tool versions are not reproduced in the catalog summary. Use the family programming documentation and the exact suffix datasheet, and verify the device identifier and configuration data before attempting an in-circuit programming or production-flashing procedure.
Is CY8C3445AXA-104 RoHS compliant?
The RoHS status of CY8C3445AXA-104 should be confirmed from the exact product documentation or declaration associated with its ordering code. The abbreviated catalog information does not state the compliance result, so no RoHS conclusion is assumed here. Procurement records should request the current manufacturer material-compliance declaration for the specific CY8C3445AXA-104 configuration.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা CY8C3445AXA-104 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose CY8C3445AXA-104 when the design requires the exact ordering code, a 50 MHz 8051 core, 32 KB flash, 4 KB SRAM, and a 100-pin TQFP footprint. CY8C3445AXI-104 is the closest published alternative and preserves those visible core and package ratings, making it the first candidate to evaluate when availability or lifecycle needs change. CY8C3445AXE-104 is another same-package family reference. CY8C3445AXC-104 may be useful when its suffix-specific configuration is required, while CY8C3446AXA-104 and CY8C3447AXA-104 should be selected only after confirming their detailed memory, peripheral, qualification, and programming behavior. For an existing released PCB, require the manufacturer ordering-code mapping and device-identification check before substituting any family member.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য CY8C3445AXI-104 CY8C3445AXE-104 CY8C3445AXC-104 CY8C3446AXA-104 CY8C3447AXA-104
Package 100-TQFP (14x14 mm) 100-TQFP (14x14 mm) 100-TQFP (14x14 mm) 100-TQFP (14x14 mm) 100-TQFP (14x14 mm) 100-TQFP (14x14 mm)
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
Maximum Clock Frequency 50 MHz 50 MHz 50 MHz 50 MHz 50 MHz 50 MHz
CPU Architecture 8-bit 8051 8-bit 8051 8-bit 8051 8-bit 8051 8-bit 8051 8-bit 8051

মূল পার্থক্যসমূহ

  • Exact same-family option with matching published core resources (বনামCY8C3445AXI-104)
  • PSoC peripheral integration reduces external control logic (বনামCY8C3446AXA-104)
  • High pin count supports extensive mixed-signal connections (বনামCY8C3447AXA-104)

ডিজাইন নোট

Design the CY8C3445AXA-104 supply for the documented 1.71 V to 5.5 V operating range and separate core and peripheral supply requirements shown in the family datasheet. Place the required bypass capacitors at the corresponding power pins, with the shortest possible return path to ground. Account for startup current, peripheral load, and voltage tolerance rather than sizing the rail from the CPU frequency alone.

Use the manufacturer TQFP-100 land pattern and pin-description table to create the footprint. Confirm pin 1 orientation, exposed versus non-exposed thermal-pad treatment, and all ground connections before routing. Keep sensitive analog inputs away from fast digital nets and programming signals, and provide adequate copper around the device without compromising the package's specified assembly requirements.

The PSoC family combines programmable analog, digital, and timing resources with a general-purpose 8051 core. Assign peripheral functions before finalizing PCB routing because changing an internal block can alter its available pins or interrupt routing. Keep external clock and programming nets away from sensitive analog inputs, and use short, direct traces for high-speed or time-critical signals.

Do not treat two 100-pin CY8C3445 MPNs as interchangeable solely because their footprints match. The suffix can encode temperature grade, packing, clock grade, or another production attribute. Compare the complete ordering table, device identification bytes, boot configuration, programming procedure, and qualification requirements. Also avoid assuming that unused analog inputs can be left floating without checking the family pin guidance.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The catalog information does not state material-compliance or automotive-qualification results for the exact ordering code. Obtain the current Infineon declarations for CY8C3445AXA-104 before incorporating compliance claims into a released product.

ডেটা যাচাই করা হয়েছে: 2026-11-15 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

CY8C3445AXA-104 datasheet CY8C3445AXA-104 specifications CY8C3445AXA-104 pinout CY8C3445AXA-104 datasheet pdf Infineon CY8C3445AXA-104 CY8C3445AXA-104 equivalent CY8C3445AXA-104 replacement CY8C3445AXA-104 drop-in replacement CY8C3445AXA-104 vs CY8C3445AXI-104 CY8C3445AXA-104 100 TQFP footprint CY8C3445AXA-104 price CY8C3445AXA-104 stock CY8C3445AXA-104 application circuit 50 MHz 8051 32KB flash TQFP-100 PSoC 3 CY8C34 family controller

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Infineon Technologies CY8C3445AXA-104 CY8C3445AXI-104 CY8C3445AXE-104 CY8C3445AXC-104 CY8C3446AXA-104 CY8C3447AXA-104 PSoC 3 PSoC CY8C34 family 8-bit 8051 MCU 8051 instruction set programmable system-on-chip mixed-signal microcontroller microcontroller semiconductor TQFP-100 100-pin TQFP 14 x 14 mm package surface-mount package 32 KB flash memory 4 KB SRAM 1 KB data EEPROM 8 KB ECC flash Peripheral Hub Unit 27 interrupt sources 50 MHz clock 1.71 V to 5.5 V supply
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন