CY8C3445AXA-104 - 50MHz 8051 MCU, 32KB Flash | Infineon
Артикул: CY8C3445AXA-104 ✓ АктивенCY8C3445AXA-104 Обзор
A PSoC microcontroller is a programmable system-on-chip that integrates a CPU core, programmable digital and analog resources, memory, and dedicated peripherals into one mixed-signal device. In the product hierarchy, the CY8C3445AXA-104 is an MCU based on the 8-bit 8051 instruction set. Its PSoC architecture allows designers to use configurable blocks for digital functions, analog conversions, and control tasks rather than relying on a fixed collection of unrelated peripheral functions.
The primary operating characteristics include an 8-bit architecture, clock operation up to 50 MHz, 32 KB of flash organized as 32K x 8, and 4 KB of SRAM for the CY8C3445 family configuration. The 100-TQFP package provides a large number of external I/O connections compared with smaller microcontroller packages. The listed operating range of 1.71 V to 5.5 V supports both low-voltage and conventional 5 V system rails.
The CY8C34 architecture includes a single-core 8051 processor, dual datapointers, four flash-protection levels, 1 KB of data EEPROM, 8 KB of ECC flash, and an interrupt controller with 27 sources and eight priority levels. A Peripheral Hub Unit provides eight parallel access paths, allowing programmable digital, analog, and timing resources to exchange data with the CPU without treating every function as a separate peripheral outside the hub.
Typical applications include industrial control panels, compact sensor-hub controllers, keypad interfaces, LED status and signaling systems, consumer appliances, data-acquisition modules, and embedded control boards requiring a mix of digital I/O and programmable analog behavior. The large TQFP footprint is particularly useful when a design needs extensive parallel I/O rather than the smallest possible board area.
When designing around the CY8C3445AXA-104, preserve the voltage ratings, oscillator requirements, programming interface, and decoupling expectations defined in the manufacturer datasheet. Because this is a mixed-signal PSoC, unused analog and digital blocks should be configured deliberately rather than left unused, and PCB routing should account for the pin arrangement and exposed power requirements of the 100-pin package.
This page combines the exact ordering information, parametric context, compatible family references, and application-oriented design guidance for the CY8C3445AXA-104. It also identifies where a complete 100-pin assignment, programming procedure, and lifecycle decision require the manufacturer documentation rather than relying on abbreviated catalog summaries.
Аналоги без доработки для CY8C3445AXA-104 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
CY8C3445AXI-104
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
CY8C3445AXE-104
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
CY8C3445AXC-104
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
CY8C3446AXA-104
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
CY8C3447AXA-104
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
CY8C3445AXA-104 Максимальные параметры и электрические характеристики
| Product Type | 8-bit PSoC 3 CY8C34-family microcontroller |
| CPU Architecture | 8051, 8-bit |
| Максимальная тактовая частота | 50 MHz |
| Program Flash Memory | 32 KB (32K x 8) |
| SRAM | 4 KB |
| Data EEPROM | 1 KB |
| ECC Flash | 8 KB |
| Operating Voltage Range | 1.71 V to 5.5 V |
| Flash Protection Levels | 4 levels |
| Interrupt Sources | 27 sources |
| Interrupt Priority Levels | 8 levels |
| Data Pointers | 2 |
| Peripheral Hub Access Paths | 8 parallel paths |
| Корпус | 100-pin TQFP |
| Package Body Size | 14 x 14 mm |
| Тип монтажа | Surface mount |
| CPU Core Count | 1 core |
Руководство по цоколевке CY8C3445AXA-104 в корпусе 14 x 14 mm
Цоколевка для CY8C3445AXA-104 (корпус 14 x 14 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для CY8C3445AXA-104.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
CY8C3445AXA-104 подходит для 6 применениеs: Industrial Control Panels, Sensor Hub and Data Acquisition, LED Lighting and Signage, Consumer Appliance Interfaces, Communication Equipment Interfaces, Security and Access Control.
Industrial Control Panels
The CY8C3445AXA-104 fits industrial control panels that combine many digital inputs with programmable signal handling. Its 100-pin TQFP package exposes substantially more I/O than a compact microcontroller package, while the 50 MHz 8051 core provides useful control-loop and user-interface processing headroom. The 1.71 V to 5.5 V operating range supports low-voltage logic systems as well as conventional 5 V industrial electronics. Programmable PSoC resources can also consolidate input conditioning, timing, and dedicated interface behavior. Before finalizing the design, verify the exact suffix temperature rating, power sequencing, analog accuracy, and peripheral assignments required by the panel architecture.
Рекомендуется
Sensor Hub and Data Acquisition
The CY8C3445AXA-104 is suitable for a compact sensor-hub controller that gathers digital measurements and coordinates mixed-signal functions. Its PSoC 3 architecture combines an 8051 processor with programmable peripheral resources, while 32 KB of flash provides dedicated space for acquisition firmware and 4 KB of SRAM supports active data handling. The 100-pin package provides a practical route to external sensors, logic converters, and communication transceivers. At 50 MHz, the MCU can service interrupts and peripheral transfers without monopolizing the CPU. Designers should allocate pins using the exact family pin table and verify that each analog or digital PSoC block remains valid at the selected operating voltage.
Рекомендуется
LED Lighting and Signage
The CY8C3445AXA-104 can control multi-channel LED lighting, status indicators, and programmable signage because its 100-pin package offers many external I/O options for drivers and control logic. The 50 MHz 8051 core can execute dimming sequences, button handling, fault monitoring, and communication updates, while the PSoC peripheral hub provides configurable timing and digital resources. A 1.71 V to 5.5 V operating range allows the controller to share a regulated rail with compatible logic. Current limits, LED drive topology, and PWM timing must be checked against the exact device documentation. Off-board constant-current drivers are preferable when an LED load would exceed the MCU pin or supply capability.
Рекомендуется
Consumer Appliance Interfaces
The CY8C3445AXA-104 suits consumer appliance control boards that need a combination of user inputs, display controls, motor or relay signaling, and embedded programmable logic. Its 32 KB flash accommodates application firmware, 4 KB of SRAM supports working state, and the 8051 core operates up to 50 MHz for responsive control. The broad 100-pin footprint offers enough connectivity for keypad scanning, sensor interfaces, and status signaling without requiring a large external glue-logic device. Use the PSoC configuration to allocate only the timers, counters, and serial functions the appliance actually needs. Validate restart behavior, brownout handling, and temperature limits for the target appliance environment before production approval.
Рекомендуется
Communication Equipment Interfaces
The CY8C3445AXA-104 can serve as the host controller for compact communication equipment, including protocol bridges, keypad terminals, and configurable interface modules. Its 50 MHz 8051 core, interrupt system with 27 sources, and eight peripheral access paths support simultaneous handling of serial traffic and real-time control functions. The 100-pin TQFP package provides connections for transceivers, status indicators, configuration inputs, and debug programming. Because the device is a mixed-signal MCU, engineers should use dedicated I/O routing for communication signals and review signal-integrity requirements, pull resistors, and clocking in the family hardware design guidance. Keep firmware compatible with the exact selected suffix and verify supported baud-rate conditions.
Рекомендуется
Security and Access Control
The CY8C3445AXA-104 is appropriate for compact access-control modules that coordinate credential readers, request-to-exit inputs, door contacts, relays, and local status feedback. Its 32 KB flash stores application and configuration code, while 4 KB of SRAM supports protocol buffers and short-lived working data. The extensive 100-pin interface capability allows the controller to consolidate several digital functions around one MCU, and the PSoC programmable blocks can support timing and communication tasks. Security-critical designs should add the appropriate external protection and ensure that authentication, credential storage, and update procedures meet the product's threat model. Validate the exact suffix grade, watchdog behavior, boot configuration, and programming access controls before field deployment.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для CY8C3445AXA-104 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | CY8C3445AXI-104 | CY8C3445AXE-104 | CY8C3445AXC-104 | CY8C3446AXA-104 | CY8C3447AXA-104 |
|---|---|---|---|---|---|---|
| Package | 100-TQFP (14x14 mm) | 100-TQFP (14x14 mm) | 100-TQFP (14x14 mm) | 100-TQFP (14x14 mm) | 100-TQFP (14x14 mm) | 100-TQFP (14x14 mm) |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Maximum Clock Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| CPU Architecture | 8-bit 8051 | 8-bit 8051 | 8-bit 8051 | 8-bit 8051 | 8-bit 8051 | 8-bit 8051 |
Ключевые отличия
- Exact same-family option with matching published core resources (против CY8C3445AXI-104)
- PSoC peripheral integration reduces external control logic (против CY8C3446AXA-104)
- High pin count supports extensive mixed-signal connections (против CY8C3447AXA-104)
Заметки по проектированию
Design the CY8C3445AXA-104 supply for the documented 1.71 V to 5.5 V operating range and separate core and peripheral supply requirements shown in the family datasheet. Place the required bypass capacitors at the corresponding power pins, with the shortest possible return path to ground. Account for startup current, peripheral load, and voltage tolerance rather than sizing the rail from the CPU frequency alone.
Use the manufacturer TQFP-100 land pattern and pin-description table to create the footprint. Confirm pin 1 orientation, exposed versus non-exposed thermal-pad treatment, and all ground connections before routing. Keep sensitive analog inputs away from fast digital nets and programming signals, and provide adequate copper around the device without compromising the package's specified assembly requirements.
The PSoC family combines programmable analog, digital, and timing resources with a general-purpose 8051 core. Assign peripheral functions before finalizing PCB routing because changing an internal block can alter its available pins or interrupt routing. Keep external clock and programming nets away from sensitive analog inputs, and use short, direct traces for high-speed or time-critical signals.
Do not treat two 100-pin CY8C3445 MPNs as interchangeable solely because their footprints match. The suffix can encode temperature grade, packing, clock grade, or another production attribute. Compare the complete ordering table, device identification bytes, boot configuration, programming procedure, and qualification requirements. Also avoid assuming that unused analog inputs can be left floating without checking the family pin guidance.
Информация о соответствии
The catalog information does not state material-compliance or automotive-qualification results for the exact ordering code. Obtain the current Infineon declarations for CY8C3445AXA-104 before incorporating compliance claims into a released product.