CY8C3446AXI-115 - 50MHz 64KB 8051 MCU | Infineon
MPN: CY8C3446AXI-115 ✓ সক্রিয়CY8C3446AXI-115 সারাংশ
A PSoC 3 is a programmable system-on-chip that integrates an embedded microcontroller core with user-programmable digital blocks, analog blocks, and dedicated peripherals. Within the broader semiconductor hierarchy, this device belongs to the microcontroller and embedded-processing category rather than a general-purpose logic IC. Its 8051-compatible core provides a familiar execution environment for industrial control, consumer equipment, and compact embedded products.
The principal device characteristics are a 50 MHz operating frequency, 64 KB of flash program memory, and support for supply voltages from 1.71 V through 5.5 V. Related CY8C3446 family listings identify the family with 24 universal digital blocks, while the package configuration is a 100-pin TQFP. This combination permits designers to consolidate control logic and configurable functions without relying on a separate high-performance processor for straightforward peripheral management.
The 8051 core operates from an 8-bit instruction architecture while the PSoC programmable fabric allows application-specific functions to be integrated around it. Flash memory provides nonvolatile program storage, while the operating-voltage range supports low-voltage system rails as well as conventional 3.3 V and 5 V equipment. The 100-pin package exposes substantially more interface options than a small microcontroller package, which is useful when a design requires numerous external connections.
Typical application areas include industrial control modules, instrumentation, interface controllers, power-system monitoring, consumer peripherals, and compact embedded products. The 50 MHz clock supports timely peripheral handling and structured control tasks, while the 64 KB flash capacity provides room for application firmware, configuration data, and boot routines. The broad supply-voltage range also makes the device useful in systems whose rails vary according to load or system mode.
Designers should treat the 100-pin TQFP footprint and device pin functions as the primary PCB constraints. Decoupling, ground distribution, programming access, clock implementation, and unused-pin handling must follow the manufacturer's package guidance. Firmware should also be tested across the intended voltage range because timing, peripheral behavior, and configuration requirements can change with operating conditions.
This page consolidates the exact device identity, electrical envelope, package information, qualified same-family alternatives, comparison parameters, and practical integration guidance. It is designed to help engineers locate the correct datasheet, evaluate replacement options, and plan a board-level design without mixing different package or programming assumptions.
এর জন্য ড্রপ-ইন বিকল্প CY8C3446AXI-115 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible CY8C3446AXI-115 (একই form factor এবং footprint) — পার্থক্য রয়েছে Processor Core.
CY8C3446AXI-099
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
CY8C3446AXE-115
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →CY8C3446AXI-115 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | 8-bit PSoC 3 CY8C34xx-family microcontroller |
| Processor Core | 8051-compatible 8-bit core |
| সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি | 50 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| অপারেটিং সাপ্লাই ভোল্টেজ | 1.71 V to 5.5 V |
| Programmable Digital Blocks | 24 UDBs |
| Package Type | 100-pin TQFP |
| Package Dimensions | 14 x 14 mm |
| মাউন্টিং টাইপ | Surface mount |
| Product Description | System on Chip (SoC) with 8051 core |
| Related Family I/O Count | 62 I/O |
| Temperature Grade Code | AXI industrial-grade ordering code |
| Speed or Version Code | -115 ordering suffix |
CY8C3446AXI-115 14 x 14 mm পিন কনফিগারেশন গাইড
CY8C3446AXI-115 (14 x 14 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি CY8C3446AXI-115.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
CY8C3446AXI-115 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control Module, Instrumentation and Data Acquisition, Power-System Monitoring, Communication Interface Controller, Consumer Peripheral Controller, Programmable Logic Companion.
Industrial Control Module
The CY8C3446AXI-115 fits compact industrial control modules that require deterministic peripheral handling without a higher-cost processor. Its 50 MHz 8051 core can execute control logic, while the 64 KB flash stores application firmware, configuration values, and operating-state tables. The 24 programmable digital blocks allow designers to implement protocol, timing, interface, or custom logic functions around the core. The 1.71 V to 5.5 V range supports varied internal rail arrangements, and the 100-pin TQFP provides the interface density needed for sensors, actuators, communications, and status indicators. Validate the exact grade-specific temperature limits and timing margins against the final enclosure and supply design.
সুপারিশকৃত
Instrumentation and Data Acquisition
The CY8C3446AXI-115 can serve as the supervisory controller in measurement equipment where acquisition, calibration, and user-interface functions must operate from one embedded platform. Its 50 MHz processing rate supports time-sensitive digital tasks, while 64 KB of flash accommodates firmware and configuration data. The 24 universal digital blocks provide flexible routing and logic resources for instrument control, status sequencing, and communication. A 100-pin package makes the device especially useful when several analog, digital, and programming signals must reach the controller. The 1.71 V to 5.5 V operating range also allows the controller to interface with multiple low-voltage subsystems. Analog accuracy and front-end performance must be evaluated separately from the digital controller specifications.
সুপারিশকৃত
Power-System Monitoring
The CY8C3446AXI-115 is appropriate for power-system monitoring modules that must collect status inputs, sequence measurements, record events, and communicate operating information. Its 50 MHz 8051 core provides enough throughput for protocol handling alongside real-time supervisory logic, and 64 KB flash supports firmware, lookup data, and diagnostic logs. The 24 programmable digital blocks can implement specialized timing, counting, or interface behavior. The broad 1.71 V to 5.5 V supply range is useful across multiple internal rail domains, while the 100-pin TQFP simplifies access to external sensing and communications connections. In this role, the controller should be paired with protected sensor inputs, appropriate isolation, and a layout that separates sensitive measurement paths from switching circuitry.
সুপারিশকৃত
Communication Interface Controller
The CY8C3446AXI-115 is suitable for dedicated communication and protocol-conversion modules because it combines a 50 MHz processor core with 24 configurable digital blocks. Firmware can implement packet handling and supervisory tasks, while programmable logic can accelerate byte framing, timing, or peripheral interfacing. Its 64 KB flash provides sufficient space for a complete embedded protocol stack and configuration data. The 1.71 V to 5.5 V operating range supports integration with modern low-voltage interface logic, and the 100-pin package exposes the required serial, control, and status pins. Final design work should verify peripheral availability, pin multiplexing, clock requirements, and electrical timing against the selected device variant and intended communication standard.
সুপারিশকৃত
Consumer Peripheral Controller
The CY8C3446AXI-115 can control compact consumer peripherals where several digital functions, user inputs, and status indicators share one processor. The 50 MHz 8051 core handles application logic, while the programmable digital blocks can implement timers, interfaces, or custom behavior without loading every function onto the main execution loop. With 64 KB of flash, the device supports a meaningful firmware footprint even for feature-rich compact products. The 1.71 V to 5.5 V range simplifies integration with multiple internal voltage domains, and the 100-pin TQFP offers ample external connectivity. Consumer designs should still evaluate reset behavior, firmware update methods, standby behavior, and production-test requirements against the complete manufacturer documentation.
সুপারিশকৃত
Programmable Logic Companion
The CY8C3446AXI-115 is useful as a programmable-logic companion when a product needs configurable logic alongside conventional embedded processing. Its 24 universal digital blocks allow application-specific Boolean functions, state machines, counters, and timing elements to be placed near associated I/O. The 8051 core at 50 MHz can supervise the programmable configuration, update parameters, and manage system-level behavior. The 64 KB flash stores firmware and programmable-block configuration, while the 1.71 V to 5.5 V range provides flexibility across low-voltage product rails. The 100-pin TQFP keeps the external connection count high enough for multiple programmable interfaces. Designers should confirm startup configuration behavior, clock-domain relationships, and pin constraints in the manufacturer resources.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা CY8C3446AXI-115 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | CY8C3446AXI-099 | CY8C3446AXE-115 |
|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 100-pin TQFP (14 x 14 mm) | 100-pin TQFP (14 x 14 mm) - same | 100-pin TQFP (14 x 14 mm) - same |
| Processor Core | 8051-compatible 8-bit core | 8051-compatible 8-bit core | 8051-compatible 8-bit core |
| Maximum Clock Frequency | 50 MHz | 50 MHz | 50 MHz |
| Flash Memory | 64 KB (64K x 8 bits) | 64 KB | 64 KB |
| Operating Supply Voltage | 1.71 V to 5.5 V | 1.7 V to 5.5 V | 1.71 V to 5.5 V |
| Ordering Suffix | AXI-115 | AXI-099 | AXE-115 |
| Product Family | PSoC 3 CY8C34xx | PSoC 3 CY8C34xx | PSoC 3 CY8C34xx |
মূল পার্থক্যসমূহ
- Documented core, memory, and clock parity with the CY8C3446AXI-099 (বনামCY8C3446AXI-099)
- Same 100-pin footprint as the CY8C3446AXE-115 (বনামCY8C3446AXE-115)
- Configurable embedded resources support integrated peripheral control (বনামCY8C3446AXI-099)
ডিজাইন নোট
Treat the 100-pin TQFP layout as a fine-pitch routing problem rather than a generic large-lead package. Follow the manufacturer land pattern and pin-description table for pad dimensions, numbering direction, and exposed thermal or thermal-tie requirements. Place required decoupling capacitors at the associated power pins and route high-current returns through an uninterrupted ground plane. Do not infer missing pin functions from the 8051 family because programmable peripheral assignments can constrain the available I/O.
Design the supply network for the full 1.71 V to 5.5 V operating range, but do not assume every peripheral or configuration is valid at every rail. Check the manufacturer's electrical-characteristics table for voltage-dependent timing, oscillator behavior, and I/O limits. Use local bulk and high-frequency decoupling according to the reference design, and keep switching-converter routing separate from sensitive analog and clock paths. Validate startup and brownout behavior across the minimum and maximum system supply conditions.
The 50 MHz operating frequency requires disciplined return paths and controlled clock routing. Keep the clock away from switching nodes and noisy analog inputs, provide a continuous ground reference beneath high-speed routes, and avoid unnecessary stubs. If programmable digital blocks drive external signals, verify their timing and I/O voltage limits against the selected clock and power configuration. PCB signal-integrity validation is especially important when long traces connect the controller to connectors or remote sensors.
কমপ্লায়েন্স তথ্য
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was stated for this exact ordering code. The AXI suffix identifies an industrial-oriented ordering variant, but it must not be treated as an AEC-Q100 qualification statement.