Infineon

CY8C3446AXI-115 - 50MHz 64KB 8051 MCU | Infineon

Teilenummer: CY8C3446AXI-115 ✓ Aktiv
1.71 V to 5.5 V Vdss 100-pin TQFP Package 50 MHz Speed 64 KB Memory
MOQ: 1 |

CY8C3446AXI-115 Übersicht

The Infineon CY8C3446AXI-115 is an 8-bit PSoC 3 CY8C34xx-family microcontroller with a 50 MHz 8051 core, 64 KB of embedded flash, a 1.71 V to 5.5 V operating-voltage range, and a 100-pin TQFP package measuring 14 x 14 mm. It combines programmable digital and analog resources with a conventional embedded-control architecture, making it suitable for designs that require both microcontroller control and configurable peripheral functions.

A PSoC 3 is a programmable system-on-chip that integrates an embedded microcontroller core with user-programmable digital blocks, analog blocks, and dedicated peripherals. Within the broader semiconductor hierarchy, this device belongs to the microcontroller and embedded-processing category rather than a general-purpose logic IC. Its 8051-compatible core provides a familiar execution environment for industrial control, consumer equipment, and compact embedded products.

The principal device characteristics are a 50 MHz operating frequency, 64 KB of flash program memory, and support for supply voltages from 1.71 V through 5.5 V. Related CY8C3446 family listings identify the family with 24 universal digital blocks, while the package configuration is a 100-pin TQFP. This combination permits designers to consolidate control logic and configurable functions without relying on a separate high-performance processor for straightforward peripheral management.

The 8051 core operates from an 8-bit instruction architecture while the PSoC programmable fabric allows application-specific functions to be integrated around it. Flash memory provides nonvolatile program storage, while the operating-voltage range supports low-voltage system rails as well as conventional 3.3 V and 5 V equipment. The 100-pin package exposes substantially more interface options than a small microcontroller package, which is useful when a design requires numerous external connections.

Typical application areas include industrial control modules, instrumentation, interface controllers, power-system monitoring, consumer peripherals, and compact embedded products. The 50 MHz clock supports timely peripheral handling and structured control tasks, while the 64 KB flash capacity provides room for application firmware, configuration data, and boot routines. The broad supply-voltage range also makes the device useful in systems whose rails vary according to load or system mode.

Designers should treat the 100-pin TQFP footprint and device pin functions as the primary PCB constraints. Decoupling, ground distribution, programming access, clock implementation, and unused-pin handling must follow the manufacturer's package guidance. Firmware should also be tested across the intended voltage range because timing, peripheral behavior, and configuration requirements can change with operating conditions.

This page consolidates the exact device identity, electrical envelope, package information, qualified same-family alternatives, comparison parameters, and practical integration guidance. It is designed to help engineers locate the correct datasheet, evaluate replacement options, and plan a board-level design without mixing different package or programming assumptions.

Drop-in-Alternativen für CY8C3446AXI-115 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit CY8C3446AXI-115 (gleiche Bauform und Footprint) – abweichend in Processor Core.

Infineon
Processor Core: 8051, 8-bit
Vergleichen mit CY8C3446AXI-115 →

CY8C3446AXI-099

✅ Drop-In
📦 100-pin TQFP (14 x 14 mm)
Same 50 MHz 8051 core, 64 KB flash, 24 UDBs, 1.7 V to 5.5 V range, and 100-pin TQFP package; the documented performance delta is 0%, with only the ordering suffix differing.

📋 Referenzalternative (nicht im Katalog)

CY8C3446AXE-115

✅ Drop-In
Infineon
📦 100-pin TQFP (14 x 14 mm)
8-bit mixed-signal microcontroller · PSoC 3 CY8C34xx · 8051, 8-bit · 50 MHz · 64 KB · 64K x 8 bits · 1.71 V to 5.5 V · 24

Preis auf Anfrage

Datenblatt ansehen →

CY8C3446AXI-115 Grenzwerte & elektrische Eigenschaften

Device Type 8-bit PSoC 3 CY8C34xx-family microcontroller
Processor Core 8051-compatible 8-bit core
Maximale Taktfrequenz 50 MHz
Flash Memory 64 KB
Flash Organization 64K x 8 bits
Betriebsversorgungsspannung 1.71 V to 5.5 V
Programmable Digital Blocks 24 UDBs
Package Type 100-pin TQFP
Package Dimensions 14 x 14 mm
Montageart Surface mount
Product Description System on Chip (SoC) with 8051 core
Related Family I/O Count 62 I/O
Temperature Grade Code AXI industrial-grade ordering code
Speed or Version Code -115 ordering suffix

CY8C3446AXI-115 14 x 14 mm Pinbelegungsleitfaden

Pinbelegung für CY8C3446AXI-115 (14 x 14 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für CY8C3446AXI-115 im 14 x 14 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für CY8C3446AXI-115.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

CY8C3446AXI-115 ist geeignet für 6 Anwendungs: Industrial Control Module, Instrumentation and Data Acquisition, Power-System Monitoring, Communication Interface Controller, Consumer Peripheral Controller, Programmable Logic Companion.

🏭

Industrial Control Module

The CY8C3446AXI-115 fits compact industrial control modules that require deterministic peripheral handling without a higher-cost processor. Its 50 MHz 8051 core can execute control logic, while the 64 KB flash stores application firmware, configuration values, and operating-state tables. The 24 programmable digital blocks allow designers to implement protocol, timing, interface, or custom logic functions around the core. The 1.71 V to 5.5 V range supports varied internal rail arrangements, and the 100-pin TQFP provides the interface density needed for sensors, actuators, communications, and status indicators. Validate the exact grade-specific temperature limits and timing margins against the final enclosure and supply design.

📊

Instrumentation and Data Acquisition

The CY8C3446AXI-115 can serve as the supervisory controller in measurement equipment where acquisition, calibration, and user-interface functions must operate from one embedded platform. Its 50 MHz processing rate supports time-sensitive digital tasks, while 64 KB of flash accommodates firmware and configuration data. The 24 universal digital blocks provide flexible routing and logic resources for instrument control, status sequencing, and communication. A 100-pin package makes the device especially useful when several analog, digital, and programming signals must reach the controller. The 1.71 V to 5.5 V operating range also allows the controller to interface with multiple low-voltage subsystems. Analog accuracy and front-end performance must be evaluated separately from the digital controller specifications.

⚡

Power-System Monitoring

The CY8C3446AXI-115 is appropriate for power-system monitoring modules that must collect status inputs, sequence measurements, record events, and communicate operating information. Its 50 MHz 8051 core provides enough throughput for protocol handling alongside real-time supervisory logic, and 64 KB flash supports firmware, lookup data, and diagnostic logs. The 24 programmable digital blocks can implement specialized timing, counting, or interface behavior. The broad 1.71 V to 5.5 V supply range is useful across multiple internal rail domains, while the 100-pin TQFP simplifies access to external sensing and communications connections. In this role, the controller should be paired with protected sensor inputs, appropriate isolation, and a layout that separates sensitive measurement paths from switching circuitry.

🌐

Communication Interface Controller

The CY8C3446AXI-115 is suitable for dedicated communication and protocol-conversion modules because it combines a 50 MHz processor core with 24 configurable digital blocks. Firmware can implement packet handling and supervisory tasks, while programmable logic can accelerate byte framing, timing, or peripheral interfacing. Its 64 KB flash provides sufficient space for a complete embedded protocol stack and configuration data. The 1.71 V to 5.5 V operating range supports integration with modern low-voltage interface logic, and the 100-pin package exposes the required serial, control, and status pins. Final design work should verify peripheral availability, pin multiplexing, clock requirements, and electrical timing against the selected device variant and intended communication standard.

📱

Consumer Peripheral Controller

The CY8C3446AXI-115 can control compact consumer peripherals where several digital functions, user inputs, and status indicators share one processor. The 50 MHz 8051 core handles application logic, while the programmable digital blocks can implement timers, interfaces, or custom behavior without loading every function onto the main execution loop. With 64 KB of flash, the device supports a meaningful firmware footprint even for feature-rich compact products. The 1.71 V to 5.5 V range simplifies integration with multiple internal voltage domains, and the 100-pin TQFP offers ample external connectivity. Consumer designs should still evaluate reset behavior, firmware update methods, standby behavior, and production-test requirements against the complete manufacturer documentation.

🧩

Programmable Logic Companion

The CY8C3446AXI-115 is useful as a programmable-logic companion when a product needs configurable logic alongside conventional embedded processing. Its 24 universal digital blocks allow application-specific Boolean functions, state machines, counters, and timing elements to be placed near associated I/O. The 8051 core at 50 MHz can supervise the programmable configuration, update parameters, and manage system-level behavior. The 64 KB flash stores firmware and programmable-block configuration, while the 1.71 V to 5.5 V range provides flexibility across low-voltage product rails. The 100-pin TQFP keeps the external connection count high enough for multiple programmable interfaces. Designers should confirm startup configuration behavior, clock-domain relationships, and pin constraints in the manufacturer resources.

Zusammenfassung der empfohlenen Produkte

CY8C3446AXI-099 Same-family 50 MHz, 64 KB-flash control alternative Verwendet in: Industrial Control Module, Power-System Monitoring, Communication Interface Controller, Consumer Peripheral Controller, Programmable Logic Companion CY8C3446AXE-115 Infineon Verwendet in: Industrial Control Module, Instrumentation and Data Acquisition, Power-System Monitoring, Communication Interface Controller, Programmable Logic Companion CY8C3446AXI-115 Infineon Verwendet in: Instrumentation and Data Acquisition, Consumer Peripheral Controller
What is the CY8C3446AXI-115?
The CY8C3446AXI-115 is an Infineon 8-bit PSoC 3 CY8C34xx-family microcontroller operating at 50 MHz with 64 KB of flash. It uses an 8051-compatible core, supports a 1.71 V to 5.5 V supply range, and is packaged in a 100-pin TQFP measuring 14 x 14 mm. According to the manufacturer product information, the device combines programmable digital resources with embedded control functions for compact embedded systems.
What is the operating voltage of the CY8C3446AXI-115?
The CY8C3446AXI-115 operates from 1.71 V to 5.5 V. According to the Infineon device listing, this range supports low-voltage embedded systems as well as conventional industrial and consumer supply rails. Engineers should check each peripheral's operating limits and the manufacturer's electrical-characteristics table when defining power rails, particularly for designs that operate at the boundaries of the stated range.
How much flash memory does the CY8C3446AXI-115 have?
The CY8C3446AXI-115 contains 64 KB of embedded flash organized as 64K x 8 bits. According to the Infineon and distributor device descriptions, this nonvolatile memory stores application firmware and associated program data. The 64 KB figure should not be confused with total RAM or programmable block storage, which are separate resources and must be checked separately in the device memory map.
What clock frequency does the CY8C3446AXI-115 use?
The CY8C3446AXI-115 is rated for operation at 50 MHz. According to the manufacturer listing, the device uses an 8051-compatible 8-bit processor core and includes programmable system-on-chip resources. The 50 MHz value is the device's stated operating frequency; the external clock, internal oscillator, timing configuration, and permissible source depend on the selected clocking scheme described in the datasheet.
What package does the CY8C3446AXI-115 use?
The CY8C3446AXI-115 is offered in a 100-pin TQFP measuring 14 x 14 mm. The 100-pin surface-mount package provides a large number of external connections for programmable digital and analog resources. Because no 100-pin TQFP drawing is present in the available package library, use the Infineon package drawing and pin-description table when assigning PCB pads and routing signals.
Where can I download the CY8C3446AXI-115 datasheet PDF?
The CY8C3446AXI-115 datasheet can be reached through the Octopart document page linked on this product page. The manufacturer documentation is the controlling source for pin assignments, electrical limits, memory organization, clocking, programming, and package drawings. Use the exact CY8C3446AXI-115 ordering code when selecting the appropriate device variant and review the suffix codes before releasing a PCB design.
Where is the CY8C3446AXI-115 pinout located?
The CY8C3446AXI-115 pinout is located in the pin-description table and package drawing in the manufacturer datasheet. The device is identified as a 100-pin TQFP in a 14 x 14 mm package, but the individual pin names are not reproduced on this page. Use the manufacturer pin table to verify power, ground, programming, clock, and general-purpose I/O assignments before making PCB connections.
What can replace the CY8C3446AXI-115?
The CY8C3446AXI-099 is the closest documented same-family drop-in candidate because it retains the 8051 core, 64 KB flash, 50 MHz operation, 24 UDBs, and 100-pin TQFP package. The CY8C3446AXE-115 is another same-package option with the same stated core, memory, frequency, and voltage range. Before replacing either device, confirm the exact suffix-specific temperature, qualification, and ordering requirements in the manufacturer documentation.
Is the CY8C3446AXI-115 the same as the CY8C3446AXI-099?
The CY8C3446AXI-115 and CY8C3446AXI-099 share the same documented 8051 core, 64 KB flash, 50 MHz frequency, 24 UDBs, and 100-pin TQFP package. Their ordering suffixes differ, so the exact temperature-grade, qualification, or variant conditions must be checked before substitution. For an existing 14 x 14 mm board, the package and core resources provide a strong basis for evaluating the -099 as a drop-in replacement.
CY8C3446AXI-115 vs CY8C3446AXI-099: which is better for an industrial design?
The CY8C3446AXI-115 is preferable when the specified -115 ordering suffix is required by the system requirements; the CY8C3446AXI-099 is preferable when its suffix-specific grade better matches the product documentation. Both are documented as 50 MHz, 64 KB-flash, 24-UDB devices in a 100-pin TQFP, so their primary differences are ordering and qualification attributes rather than core frequency or package geometry.
When should I choose the CY8C3446AXI-115 instead of the CY8C3446AXI-099?
Choose the CY8C3446AXI-115 when the bill of materials or qualification plan specifically requires the -115 suffix. Choose the CY8C3446AXI-099 only after confirming that its suffix-specific operating conditions satisfy the product requirements. Since both devices are documented with the same 8051 core, 64 KB flash, 50 MHz clock, 24 UDBs, and 100-pin TQFP, the decision normally depends on grade, qualification, and ordering requirements.
Is the CY8C3446AXI-115 suitable for industrial control systems?
The CY8C3446AXI-115 is suitable for many industrial control tasks because it combines a 50 MHz 8051 core, 64 KB flash, 24 programmable digital blocks, and a 1.71 V to 5.5 V operating range. The AXI ordering suffix denotes an industrial-oriented variant, but designers should still confirm the exact temperature range, ESD performance, qualification status, and lifecycle conditions from the manufacturer documentation.
What is the best Infineon equivalent for the CY8C3446AXI-115?
The best documented Infineon equivalent is CY8C3446AXI-099 because it retains the same 8051 core, 64 KB flash, 50 MHz operating frequency, 24 UDBs, and 100-pin TQFP package. The CY8C3446AXE-115 also preserves the core, memory, frequency, voltage range, and package. Exact grade and suffix conditions should be reviewed before either device is treated as a production substitution.
Where can I buy the CY8C3446AXI-115?
Use the Request a Quote form on this page to request the CY8C3446AXI-115, current commercial terms, and production availability. The quote request should include your required quantity, target package format, and expected schedule. Stock status can change by lot and region, so current availability should be confirmed directly through the form rather than inferred from general catalog pages.
What is the price and lead time of the CY8C3446AXI-115?
The current commercial price and lead time for the CY8C3446AXI-115 should be obtained through the Request a Quote form on this page. Provide the required quantity, package format, production schedule, and target ship-to location. The structured price fields reflect extractable catalog data and can be separated from live commercial terms, so the form provides the appropriate route for an actionable quotation.
Is the CY8C3446AXI-115 currently in stock?
Current CY8C3446AXI-115 stock should be confirmed through the Request a Quote form on this page. Availability can vary with order quantity, lot, package format, and regional inventory. Submit the quantity and production schedule to obtain a current supply response, and do not treat an undated catalog listing as confirmation that a production quantity is immediately available.

Technische Referenzdaten für CY8C3446AXI-115 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the CY8C3446AXI-115 when the product specification requires the exact -115 ordering suffix and the AXI industrial-grade code. The device is appropriate for embedded systems needing an 8051-compatible core at 50 MHz, 64 KB of flash, programmable digital resources, and a 1.71 V to 5.5 V supply range. The CY8C3446AXI-099 is the closest documented alternative for an existing 100-pin TQFP design because its core, memory, frequency, UDB count, voltage range, and package are documented as identical; select it when its suffix-specific grade conditions better fit the product. The CY8C3446AXE-115 is also package-compatible and retains the same listed core, memory, frequency, and voltage range, but its grade code differs. In every case, verify the exact temperature, qualification, lifecycle, programming, and ordering requirements before approving a substitution.

Vergleich mit Alternativen

Parameter Dieses Produkt CY8C3446AXI-099 CY8C3446AXE-115
Brand Infineon Technologies Infineon Technologies Infineon Technologies
Package 100-pin TQFP (14 x 14 mm) 100-pin TQFP (14 x 14 mm) - same 100-pin TQFP (14 x 14 mm) - same
Processor Core 8051-compatible 8-bit core 8051-compatible 8-bit core 8051-compatible 8-bit core
Maximum Clock Frequency 50 MHz 50 MHz 50 MHz
Flash Memory 64 KB (64K x 8 bits) 64 KB 64 KB
Operating Supply Voltage 1.71 V to 5.5 V 1.7 V to 5.5 V 1.71 V to 5.5 V
Ordering Suffix AXI-115 AXI-099 AXE-115
Product Family PSoC 3 CY8C34xx PSoC 3 CY8C34xx PSoC 3 CY8C34xx

Wichtigste Unterscheidungsmerkmale

  • Documented core, memory, and clock parity with the CY8C3446AXI-099 (vs. CY8C3446AXI-099)
  • Same 100-pin footprint as the CY8C3446AXE-115 (vs. CY8C3446AXE-115)
  • Configurable embedded resources support integrated peripheral control (vs. CY8C3446AXI-099)

Designhinweise

Treat the 100-pin TQFP layout as a fine-pitch routing problem rather than a generic large-lead package. Follow the manufacturer land pattern and pin-description table for pad dimensions, numbering direction, and exposed thermal or thermal-tie requirements. Place required decoupling capacitors at the associated power pins and route high-current returns through an uninterrupted ground plane. Do not infer missing pin functions from the 8051 family because programmable peripheral assignments can constrain the available I/O.

Design the supply network for the full 1.71 V to 5.5 V operating range, but do not assume every peripheral or configuration is valid at every rail. Check the manufacturer's electrical-characteristics table for voltage-dependent timing, oscillator behavior, and I/O limits. Use local bulk and high-frequency decoupling according to the reference design, and keep switching-converter routing separate from sensitive analog and clock paths. Validate startup and brownout behavior across the minimum and maximum system supply conditions.

The 50 MHz operating frequency requires disciplined return paths and controlled clock routing. Keep the clock away from switching nodes and noisy analog inputs, provide a continuous ground reference beneath high-speed routes, and avoid unnecessary stubs. If programmable digital blocks drive external signals, verify their timing and I/O voltage limits against the selected clock and power configuration. PCB signal-integrity validation is especially important when long traces connect the controller to connectors or remote sensors.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was stated for this exact ordering code. The AXI suffix identifies an industrial-oriented ordering variant, but it must not be treated as an AEC-Q100 qualification statement.

Daten verifiziert am: 2026-11-15 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

CY8C3446AXI-115 datasheet CY8C3446AXI-115 pinout CY8C3446AXI-115 datasheet pdf CY8C3446AXI-115 schematic CY8C3446AXI-115 equivalent CY8C3446AXI-115 replacement CY8C3446AXI-115 cross reference CY8C3446AXI-115 vs CY8C3446AXI-099 CY8C3446AXI-115 footprint CY8C3446AXI-115 price CY8C3446AXI-115 stock Infineon CY8C3446AXI-115 CY8C3446 100 TQFP pinout CY8C3446AXI-115 application circuit

Verwandte Bauteile & Begriffe

Infineon Technologies CY8C3446AXI-115 CY8C3446AXI-099 CY8C3446AXE-115 PSoC 3 CY8C34xx family 8051-compatible core 8-bit microcontroller microcontroller embedded processor system on chip semiconductor programmable digital blocks UDB 50 MHz clock 64 KB flash 1.71 V to 5.5 V operating voltage 100-pin TQFP TQFP package family surface mount industrial control instrumentation communication interface RoHS REACH AEC-Q100
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen