Analog Devices

DG411DY-T - Quad SPST 45Ω Analog Switch | Analog Devices

MPN: DG411DY-T ✓ সক্রিয়
45 Ω Rds(on) 16-SOIC, 3.90 mm nominal width Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

DG411DY-T সারাংশ

Analog Devices DG411DY-T is a four-channel, single-pole single-throw CMOS analog switch with a 1:1 signal configuration, 45 Ω typical on-resistance, and a 16-pin SOIC package. It provides four independent switches for routing analog or digital signals while operating from a dual supply, and its control inputs are compatible with TTL and CMOS logic.

An analog switch is a semiconductor device that connects or isolates signal paths under digital control. The DG411 family belongs to the interface-IC hierarchy, combining analog switching functions with logic-compatible control. Each of its four independent SPST channels can route a source node to one destination node, making the device suitable for signal multiplexing, test equipment, instrumentation, communication systems, and data-acquisition designs.

The DG411DY-T offers four independent switch channels, 45 Ω on-resistance, and TTL/CMOS-compatible control inputs in a 16-SOIC package. The redesigned DG411 family also specifies on-resistance matching between switches of 3 Ω maximum and guaranteed on-resistance flatness across the signal range of 4 Ω maximum. These characteristics help reduce channel-to-channel impedance mismatch when multiple signals share similar routing paths.

Its monolithic CMOS implementation combines analog switching with low-power digital control. Four separately controlled channels permit independent signal selection rather than forcing a fixed multiplexing arrangement. Designers must still account for supply voltage, input and output signal limits, control-logic levels, switch charge injection, and the bandwidth of the selected operating mode when matching the device to precision measurement circuits.

Typical uses include multimeter and oscilloscope input routing, automated test systems, sensor signal conditioning, industrial control interfaces, and communication equipment. The four-channel architecture is particularly useful when a board must route several precision signals through a common measurement or conversion stage. The 16-SOIC package also supports conventional surface-mount assembly and external routing on both sides of the PCB.

A critical design consideration is preserving the full-scale input and output signal range. The control interface, supply rails, and analog signal limits must be checked together because a valid logic command does not by itself guarantee safe operation for every analog voltage. The manufacturer product page and datasheet should be used to confirm absolute maximum ratings, electrical characteristics, and pin assignments before layout release.

This product overview combines the DG411 family architecture, verified package and switching specifications, practical application guidance, and package-compatible replacement information. It is intended to help engineers determine whether the DG411DY-T meets their routing, logic-interface, precision, and assembly requirements before committing the part to a PCB design.

এর জন্য ড্রপ-ইন বিকল্প DG411DY-T — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible DG411DY-T (একই form factor এবং footprint) — পার্থক্য রয়েছে Number of Switches, Package, Switch Configuration, Technology.

Vishay Intertechnology
Number of Switches: 4 (quad)
Package: 16-SOIC (0.154 in, 3.90 mm width)
Switch Configuration: SPST, 1:1 (four independent)
এর সাথে তুলনা করুন DG411DY-T →

DG411DY-T1

✅ ড্রপ-ইন
📦 SOIC-16
On-resistance is 35 Ω versus 45 Ω for DG411DY-T, a 10 Ω or approximately 22% reduction; supply, logic, and temperature limits require confirmation

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

DG411DY-T1-E3

✅ ড্রপ-ইন
📦 SOIC-16
On-resistance is 35 Ω versus 45 Ω for DG411DY-T, a 10 Ω or approximately 22% reduction; ordering and qualification details differ

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

DG411DY-E3

✅ ড্রপ-ইন
Vishay Intertechnology
📦 SOIC-16
Precision Monolithic Quad SPST CMOS Analog Switch · 4 (quad) · SPST, 1:1 (four independent) · 35 Ohm · CMOS · 0.35 uW (low power) · TTL and CMOS compatible · 15 V / 18 V / 24 V / 28 V class (per distributor listing)

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

DG411DY-T সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Number of Switches 4
Switch Configuration 1:1 SPST
On-Resistance 45 Ω
On-Resistance Matching Between Switches 3 Ω maximum
On-Resistance Flatness Over Signal Range 4 Ω maximum
Technology Monolithic CMOS
Logic Compatibility TTL and CMOS compatible
প্যাকেজ 16-SOIC, 3.90 mm nominal width
মাউন্টিং টাইপ Surface mount
Channel Independence 4 independent SPST channels
Production Status Production

DG411DY-T 16-soic, 3.90 mm nominal width পিন কনফিগারেশন গাইড

DG411DY-T (16-soic, 3.90 mm nominal width প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

DG411DY-T-এর জন্য 16-soic, 3.90 mm nominal width প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি DG411DY-T.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

DG411DY-T এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Automated Test Equipment Signal Routing, Precision Data Acquisition, Multimeter Front-End Switching, Industrial Sensor Interface, Communication Signal Isolation, Portable Instrumentation.

🏭

Automated Test Equipment Signal Routing

The DG411DY-T fits automated test equipment that must route several instrument channels through a common measurement path. Four independent SPST switches provide flexible channel selection without a fixed multiplexing sequence, and the 45 Ω on-resistance can support moderate-impedance signal paths. The 16-SOIC package simplifies routing across both sides of a PCB. Engineers should budget for the switch resistance, leakage, capacitance, and charge injection, especially when precision measurements require an error correction against the selected channel.

📊

Precision Data Acquisition

The DG411DY-T can select among multiple sensor or conditioned measurement inputs in a precision data-acquisition system. Its four independent 1:1 SPST channels preserve signal isolation when a channel is open, while TTL- and CMOS-compatible control allows direct use with common digital sequencers. For high-accuracy designs, account for the listed 45 Ω on-resistance and the family's 4 Ω maximum on-resistance flatness over the signal range. Input impedance should be high enough that switch loading remains small relative to the measurement uncertainty.

🔧

Multimeter Front-End Switching

A multimeter front end benefits from four independent switch paths that can connect probes or internal sources without tying multiple inputs together permanently. The DG411DY-T's SPST configuration provides straightforward channel isolation, and its control inputs support TTL- or CMOS-compatible sequencing. Designers should verify the analog signal limits and supply requirements for the exact ordering code, especially when measuring low-level signals. The 45 Ω resistance is appropriate for many medium-impedance instrument paths but may require correction for very high-impedance precision measurements.

🏭

Industrial Sensor Interface

The DG411DY-T can route sensor outputs or conditioned industrial signals under microcontroller control. Four separately controlled channels allow different inputs to be selected without sharing a permanently common conductor, while the monolithic CMOS construction and logic-compatible control suit compact embedded systems. The design should verify the signal range, supply rails, control thresholds, and temperature limits for the exact part. Use guarding and a controlled ground return where low-leakage measurements are important, because PCB contamination can dominate the error budget.

🌐

Communication Signal Isolation

The DG411DY-T is useful for isolating or reconnecting communication lines when a board must prevent unwanted signal propagation between channels. Its four independent SPST switches provide one connection per control decision and can operate with TTL- or CMOS-compatible control logic. The listed 45 Ω on-resistance introduces a defined series impedance that must remain acceptable to the line receiver. For high-speed signals, verify bandwidth, capacitance, off-state isolation, and propagation behavior against the latest manufacturer electrical characteristics.

📱

Portable Instrumentation

The DG411DY-T supports compact instrumentation requiring several switchable signal paths in a surface-mount footprint. The 16-SOIC package offers a straightforward assembly option, while four independently controlled SPST channels reduce the need for multiple discrete switch packages. In battery-powered equipment, confirm the exact device's power-consumption limits and operating voltage before finalizing the supply architecture. Signal traces should be kept short where possible, and control transitions should remain within the manufacturer's absolute maximum ratings.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

DG411DY-T1 Package-compatible DG411-family switching alternative ব্যবহৃত হয়: Automated Test Equipment Signal Routing, Precision Data Acquisition, Industrial Sensor Interface, Communication Signal Isolation, Portable Instrumentation DG411DY-T1-E3 16-SOIC quad-SPST switching alternative ব্যবহৃত হয়: Automated Test Equipment Signal Routing, Multimeter Front-End Switching, Industrial Sensor Interface, Portable Instrumentation DG411DY Lower-listed-resistance DG411-family option ব্যবহৃত হয়: Precision Data Acquisition, Multimeter Front-End Switching, Communication Signal Isolation
What is the DG411DY-T and what does it do?
The DG411DY-T is a four-channel, 1:1 single-pole single-throw CMOS analog switch from Analog Devices. Each channel independently connects or isolates an analog signal path under TTL- or CMOS-compatible control. According to the Analog Devices DG411 product page, the family uses a 16-SOIC package and provides 45 Ω on-resistance for the DG411DY-T configuration, making it appropriate for instrument, test, and signal-routing systems.
What are the key specifications of DG411DY-T that engineers should know?
The DG411DY-T provides four independent SPST channels in a 16-SOIC package with 45 Ω on-resistance. According to the Analog Devices DG411 product page, the redesigned family limits on-resistance matching between switches to 3 Ω maximum and guarantees on-resistance flatness over the signal range at 4 Ω maximum. The control inputs accept TTL- and CMOS-compatible signals, while the monolithic CMOS implementation supports compact surface-mount routing designs.
Where can I download the DG411DY datasheet PDF?
The official DG411 documentation is available from the Analog Devices DG411 product page at https://www.analog.com/en/products/dg411.html. From that page, select the data sheet under documentation for the complete electrical characteristics, absolute maximum ratings, truth tables, timing information, and package drawings. The manufacturer page also identifies the DG411 family as an improved, production quad-SPST analog switch design.
Where can I find the DG411DY-T pinout?
Use the pin-description table and package drawing in the official Analog Devices DG411 data sheet linked from https://www.analog.com/en/products/dg411.html. The verified product information identifies the package as 16-SOIC, but it does not provide the individual pin numbers and functions required for a reliable PCB layout. Confirm the control pins, supply terminals, analog terminals, and exposed package details against the current manufacturer document.
DG411DY-T vs DG411DY-T1 - which is the better replacement?
The DG411DY-T1 is a Vishay Siliconix version of the DG411 family and can serve as a package-oriented replacement where its ratings satisfy the design. The verified listings identify both as four-circuit, 1:1 SPST switches in 16-SOIC packages, while the listed on-resistance is 45 Ω for DG411DY-T and 35 Ω for DG411DY-T1, a 10 Ω or approximately 22% reduction. Verify supply range, logic levels, temperature grade, and absolute maximum ratings before substitution.
Can DG411DY-T1 replace DG411DY-T without a PCB change?
Yes, the DG411DY-T1 can be considered for a pin-compatible replacement because both are listed as four-circuit, 1:1 SPST analog switches in 16-SOIC packages. The Vishay DG411DY-T1 listing states 35 Ω on-resistance versus 45 Ω for DG411DY-T, providing a lower nominal resistance. Installation compatibility does not replace qualification: confirm supply voltage, control thresholds, temperature range, leakage, bandwidth, and all absolute maximum ratings.
When should I choose DG411DY-T over DG411DY-T1-E3?
Choose the DG411DY-T when its Analog Devices 45 Ω on-resistance, qualification status, and supply ratings satisfy the target application. Choose DG411DY-T1-E3 when the Vishay Siliconix source and its documented operating conditions better match the product qualification program. Both are listed in 16-SOIC packages with 35 Ω on-resistance for the DG411DY-T1-E3, but package matching alone does not establish full functional equivalence.
Is DG411DY-T suitable for test and measurement equipment?
Yes, the DG411DY-T is suitable for test and measurement routing when its 45 Ω on-resistance and signal-range limits meet the instrument accuracy budget. Its four independent SPST channels can route multiple inputs without sharing a fixed multiplexer sequence, while TTL- and CMOS-compatible control supports digital sequencing systems. For high-impedance precision paths, include switch leakage, charge injection, off-state isolation, and parasitic capacitance in the error budget.
How much insertion resistance does the DG411DY-T add?
The DG411DY-T has a listed on-resistance of 45 Ω in its closed state. In a practical signal path, the useful insertion loss also includes trace resistance, connector resistance, switch capacitance, and the source or input impedance. According to the Analog Devices DG411 product page, the redesigned family guarantees on-resistance flatness within 4 Ω maximum over the signal range, which helps engineers evaluate resistance variation as the analog voltage changes.
What is the difference between DG411DY-T and DG411DY?
Both names identify variants of the DG411 quad-SPST analog-switch family, but the suffix can encode manufacturer-specific ordering or packaging information. The DG411DY-T is listed by Analog Devices with 45 Ω on-resistance, while DG411DY is also identified as a Vishay Siliconix recommended alternative. Do not treat the suffix difference alone as proof of electrical equivalence; compare supply voltage, logic thresholds, leakage, bandwidth, temperature range, and qualification.
What can replace DG411DY-T?
The strongest package-oriented candidates identified for DG411DY-T are Vishay Siliconix DG411DY-T1, DG411DY-T1-E3, and DG411DY, all associated with the DG411 family and 16-SOIC packaging. The T1 and T1-E3 listings specify 35 Ω on-resistance, 10 Ω lower than the DG411DY-T's listed 45 Ω value. Treat each as a candidate replacement until its electrical limits, lifecycle status, qualification, and lead-time requirements have been checked.
Where can I buy DG411DY-T and check its current price?
Use the Request a Quote form on this page to request DG411DY-T pricing, availability, and lead time. The quote team can confirm the exact ordering suffix, production status, and current shipment quantity without relying on a stale catalog amount. For technical acceptance, provide the required quantity, date code policy, target package suffix, and any RoHS or automotive procurement documentation.
What is the lead time for DG411DY-T?
The current lead time for DG411DY-T should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, package suffix, date-code requirements, and production scheduling. The manufacturer identifies the DG411 family as production, but a current quotation is the appropriate way to confirm executable delivery timing for the exact DG411DY-T ordering code.
Is DG411DY-T in stock?
Current DG411DY-T stock should be confirmed through the Request a Quote form on this page. When requesting availability, specify the required quantity, acceptable date-code range, shipment destination, and whether partial fulfillment is permitted. The manufacturer lists the DG411 family as production, which confirms ongoing product intent but does not by itself guarantee immediate stock for every order quantity and package configuration.
Is the DG411DY-T RoHS compliant?
The RoHS status of the exact DG411DY-T ordering code should be confirmed with the supplier through the Request a Quote form and the current manufacturer documentation. Do not infer RoHS, REACH, lead-free, or halogen-free status solely from the family name or a distributor category label. Request the applicable material or environmental compliance documentation for the lot and package suffix being purchased.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা DG411DY-T — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the DG411DY-T when you need four independently controlled SPST analog switches in a 16-SOIC footprint and the 45 Ω on-resistance, channel-matching behavior, and supply arrangements meet the design requirements. It is appropriate for instrumentation, automated test systems, sensor interfaces, and communication routing where TTL- or CMOS-compatible control is needed. Consider DG411DY-T1 or DG411DY-T1-E3 when their documented 35 Ω on-resistance is beneficial and their supplier-specific electrical limits are fully qualified. DG411DY is another DG411-family option for designers comparing ordering, lifecycle, or qualification conditions. A shared 16-SOIC package simplifies mechanical replacement, but engineers should verify supply range, logic thresholds, analog signal limits, leakage, bandwidth, temperature grade, and qualification before approving any substitution.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য DG411DY-T1 DG411DY-T1-E3 DG411DY
Package SOIC-16 16-SOIC 16-SOIC 16-SOIC
Brand Analog Devices Vishay Siliconix Vishay Siliconix Vishay Siliconix
Number of Switches 4 4 4 4
Switch Configuration 1:1 SPST 1:1 SPST 1:1 SPST 1:1 SPST
On-Resistance 45 Ω 35 Ω 35 Ω 35 Ω
Logic Compatibility TTL and CMOS compatible TTL and CMOS compatible TTL and CMOS compatible TTL and CMOS compatible
Technology Monolithic CMOS Monolithic CMOS Monolithic CMOS Monolithic CMOS

মূল পার্থক্যসমূহ

  • Four independently controlled analog switches in a single package (বনামDG411DY-T1)
  • Documented 45 Ω on-resistance with channel matching specification (বনামDG411DY-T1-E3)
  • TTL- and CMOS-compatible independent control (বনামDG411DY)

ডিজাইন নোট

Include the 45 Ω closed-switch resistance and the family's 4 Ω maximum on-resistance flatness in the channel error calculation. For precision measurement paths, compare the source impedance with the switch resistance and determine whether a gain or offset correction is required. Account separately for off-state leakage, switch capacitance, and charge injection because these effects are not represented by the nominal on-resistance alone.

Route analog switch terminals directly to their intended sources and destinations, keeping the switched traces short and away from fast control and clock lines. Provide a low-impedance ground reference beneath the device and decouple each supply rail according to the manufacturer circuit recommendations. Because the exact pin assignments are not reproduced on this page, use the package drawing in the official data sheet when assigning every PCB land.

Do not treat a shared package and similar MPN as sufficient proof of interchangeable operation. Before fitting DG411DY-T1, DG411DY-T1-E3, or DG411DY, compare supply voltage, control thresholds, analog signal limits, leakage, bandwidth, temperature range, and qualification. The listed 35 Ω on-resistance of the Vishay options is lower than the DG411DY-T's 45 Ω value, but that difference does not resolve every electrical compatibility issue.

Use a solid, quiet ground plane and avoid placing the analog paths beneath unrelated switching regulators or high-current return paths. Where leakage matters, clean the PCB and use guarding techniques around sensitive input nodes. Control traces should be driven with compatible levels and adequate rise and fall times, while unused or disconnected channels should be configured according to the manufacturer's recommended application circuit.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The exact environmental and material compliance status of the DG411DY-T ordering code was not established. Request current compliance documentation with the quotation.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

dg411dy datasheet dg411dy pdf DG411DY-T datasheet DG411DY-T pinout DG411DY-T specifications DG411DY-T 16-SOIC DG411DY-T analog switch DG411DY-T equivalent DG411DY-T replacement DG411DY-T vs DG411DY-T1 DG411DY-T application circuit DG411DY-T price DG411DY-T stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices DG411DY-T DG411DY-T1 DG411DY-T1-E3 DG411DY DG411 quad SPST analog switch CMOS analog switch interface IC analog switch single-pole single-throw on-resistance TTL-compatible control CMOS-compatible control 16-SOIC SOIC package family surface-mount technology SMD instrumentation automated test equipment data acquisition sensor signal conditioning signal isolation on-resistance matching on-resistance flatness
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন