DG411DY-T - Quad SPST 45Ω Analog Switch | Analog Devices
MPN: DG411DY-T ✓ 啟用中DG411DY-T 概覽
An analog switch is a semiconductor device that connects or isolates signal paths under digital control. The DG411 family belongs to the interface-IC hierarchy, combining analog switching functions with logic-compatible control. Each of its four independent SPST channels can route a source node to one destination node, making the device suitable for signal multiplexing, test equipment, instrumentation, communication systems, and data-acquisition designs.
The DG411DY-T offers four independent switch channels, 45 Ω on-resistance, and TTL/CMOS-compatible control inputs in a 16-SOIC package. The redesigned DG411 family also specifies on-resistance matching between switches of 3 Ω maximum and guaranteed on-resistance flatness across the signal range of 4 Ω maximum. These characteristics help reduce channel-to-channel impedance mismatch when multiple signals share similar routing paths.
Its monolithic CMOS implementation combines analog switching with low-power digital control. Four separately controlled channels permit independent signal selection rather than forcing a fixed multiplexing arrangement. Designers must still account for supply voltage, input and output signal limits, control-logic levels, switch charge injection, and the bandwidth of the selected operating mode when matching the device to precision measurement circuits.
Typical uses include multimeter and oscilloscope input routing, automated test systems, sensor signal conditioning, industrial control interfaces, and communication equipment. The four-channel architecture is particularly useful when a board must route several precision signals through a common measurement or conversion stage. The 16-SOIC package also supports conventional surface-mount assembly and external routing on both sides of the PCB.
A critical design consideration is preserving the full-scale input and output signal range. The control interface, supply rails, and analog signal limits must be checked together because a valid logic command does not by itself guarantee safe operation for every analog voltage. The manufacturer product page and datasheet should be used to confirm absolute maximum ratings, electrical characteristics, and pin assignments before layout release.
This product overview combines the DG411 family architecture, verified package and switching specifications, practical application guidance, and package-compatible replacement information. It is intended to help engineers determine whether the DG411DY-T meets their routing, logic-interface, precision, and assembly requirements before committing the part to a PCB design.
直接替換替代品,適用於 DG411DY-T — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: DG411DY-T (相同外形與佔位) — 差異在於 Number of Switches, Package, Switch Configuration, Technology.
DG411DY-T1
✅ 直接替換📋 參考替代品(不在目錄中)
DG411DY-T1-E3
✅ 直接替換📋 參考替代品(不在目錄中)
DG411DY-E3
✅ 直接替換聯絡詢價
查看資料表 →DG411DY-T 最大額定值與電氣特性
| Number of Switches | 4 |
| Switch Configuration | 1:1 SPST |
| On-Resistance | 45 Ω |
| On-Resistance Matching Between Switches | 3 Ω maximum |
| On-Resistance Flatness Over Signal Range | 4 Ω maximum |
| Technology | Monolithic CMOS |
| Logic Compatibility | TTL and CMOS compatible |
| 封裝 | 16-SOIC, 3.90 mm nominal width |
| 安裝類型 | Surface mount |
| Channel Independence | 4 independent SPST channels |
| Production Status | Production |
DG411DY-T 16-soic, 3.90 mm nominal width 腳位配置指南
DG411DY-T(16-soic, 3.90 mm nominal width 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: DG411DY-T.
請參閱 資料表 以查看完整腳位配置。
典型應用
DG411DY-T 適用於 6 應用s: Automated Test Equipment Signal Routing, Precision Data Acquisition, Multimeter Front-End Switching, Industrial Sensor Interface, Communication Signal Isolation, Portable Instrumentation.
Automated Test Equipment Signal Routing
The DG411DY-T fits automated test equipment that must route several instrument channels through a common measurement path. Four independent SPST switches provide flexible channel selection without a fixed multiplexing sequence, and the 45 Ω on-resistance can support moderate-impedance signal paths. The 16-SOIC package simplifies routing across both sides of a PCB. Engineers should budget for the switch resistance, leakage, capacitance, and charge injection, especially when precision measurements require an error correction against the selected channel.
推薦
Precision Data Acquisition
The DG411DY-T can select among multiple sensor or conditioned measurement inputs in a precision data-acquisition system. Its four independent 1:1 SPST channels preserve signal isolation when a channel is open, while TTL- and CMOS-compatible control allows direct use with common digital sequencers. For high-accuracy designs, account for the listed 45 Ω on-resistance and the family's 4 Ω maximum on-resistance flatness over the signal range. Input impedance should be high enough that switch loading remains small relative to the measurement uncertainty.
推薦
Multimeter Front-End Switching
A multimeter front end benefits from four independent switch paths that can connect probes or internal sources without tying multiple inputs together permanently. The DG411DY-T's SPST configuration provides straightforward channel isolation, and its control inputs support TTL- or CMOS-compatible sequencing. Designers should verify the analog signal limits and supply requirements for the exact ordering code, especially when measuring low-level signals. The 45 Ω resistance is appropriate for many medium-impedance instrument paths but may require correction for very high-impedance precision measurements.
推薦
Industrial Sensor Interface
The DG411DY-T can route sensor outputs or conditioned industrial signals under microcontroller control. Four separately controlled channels allow different inputs to be selected without sharing a permanently common conductor, while the monolithic CMOS construction and logic-compatible control suit compact embedded systems. The design should verify the signal range, supply rails, control thresholds, and temperature limits for the exact part. Use guarding and a controlled ground return where low-leakage measurements are important, because PCB contamination can dominate the error budget.
推薦
Communication Signal Isolation
The DG411DY-T is useful for isolating or reconnecting communication lines when a board must prevent unwanted signal propagation between channels. Its four independent SPST switches provide one connection per control decision and can operate with TTL- or CMOS-compatible control logic. The listed 45 Ω on-resistance introduces a defined series impedance that must remain acceptable to the line receiver. For high-speed signals, verify bandwidth, capacitance, off-state isolation, and propagation behavior against the latest manufacturer electrical characteristics.
推薦
Portable Instrumentation
The DG411DY-T supports compact instrumentation requiring several switchable signal paths in a surface-mount footprint. The 16-SOIC package offers a straightforward assembly option, while four independently controlled SPST channels reduce the need for multiple discrete switch packages. In battery-powered equipment, confirm the exact device's power-consumption limits and operating voltage before finalizing the supply architecture. Signal traces should be kept short where possible, and control transitions should remain within the manufacturer's absolute maximum ratings.
推薦
推薦產品摘要
工程參考資料,適用於 DG411DY-T — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | DG411DY-T1 | DG411DY-T1-E3 | DG411DY |
|---|---|---|---|---|
| Package | SOIC-16 | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | Analog Devices | Vishay Siliconix | Vishay Siliconix | Vishay Siliconix |
| Number of Switches | 4 | 4 | 4 | 4 |
| Switch Configuration | 1:1 SPST | 1:1 SPST | 1:1 SPST | 1:1 SPST |
| On-Resistance | 45 Ω | 35 Ω | 35 Ω | 35 Ω |
| Logic Compatibility | TTL and CMOS compatible | TTL and CMOS compatible | TTL and CMOS compatible | TTL and CMOS compatible |
| Technology | Monolithic CMOS | Monolithic CMOS | Monolithic CMOS | Monolithic CMOS |
主要差異化特點
- Four independently controlled analog switches in a single package (對比DG411DY-T1)
- Documented 45 Ω on-resistance with channel matching specification (對比DG411DY-T1-E3)
- TTL- and CMOS-compatible independent control (對比DG411DY)
設計說明
Include the 45 Ω closed-switch resistance and the family's 4 Ω maximum on-resistance flatness in the channel error calculation. For precision measurement paths, compare the source impedance with the switch resistance and determine whether a gain or offset correction is required. Account separately for off-state leakage, switch capacitance, and charge injection because these effects are not represented by the nominal on-resistance alone.
Route analog switch terminals directly to their intended sources and destinations, keeping the switched traces short and away from fast control and clock lines. Provide a low-impedance ground reference beneath the device and decouple each supply rail according to the manufacturer circuit recommendations. Because the exact pin assignments are not reproduced on this page, use the package drawing in the official data sheet when assigning every PCB land.
Do not treat a shared package and similar MPN as sufficient proof of interchangeable operation. Before fitting DG411DY-T1, DG411DY-T1-E3, or DG411DY, compare supply voltage, control thresholds, analog signal limits, leakage, bandwidth, temperature range, and qualification. The listed 35 Ω on-resistance of the Vishay options is lower than the DG411DY-T's 45 Ω value, but that difference does not resolve every electrical compatibility issue.
Use a solid, quiet ground plane and avoid placing the analog paths beneath unrelated switching regulators or high-current return paths. Where leakage matters, clean the PCB and use guarding techniques around sensitive input nodes. Control traces should be driven with compatible levels and adequate rise and fall times, while unused or disconnected channels should be configured according to the manufacturer's recommended application circuit.
合規資訊
The exact environmental and material compliance status of the DG411DY-T ordering code was not established. Request current compliance documentation with the quotation.