DG419AK - 35Ω SPDT CMOS Analog Switch | Vishay Siliconix
MPN: DG419AK ✓ সক্রিয়DG419AK সারাংশ
An analog switch is an integrated semiconductor device that controls the path of voltage or current signals without mechanically moving a contact. The DG419AK belongs to the interface-IC hierarchy, where CMOS analog switches connect sensors, amplifiers, converters, test circuits, and other signal-processing blocks. Its SPDT configuration makes it useful where one signal path must be selected from two sources, including test and measurement, data acquisition, and industrial control systems.
The manufacturer describes the DG419 family's redesigned precision switches as having guaranteed on-resistance matching of 3 Ω maximum between switches and guaranteed on-resistance flatness of 4 Ω maximum over the signal range. These characteristics help reduce channel-dependent gain errors when the same switch is used for multiple paths. The DG419AK listing also identifies a 35 Ω on-resistance, while another catalog record for the DG419AK lists 30 Ω.
The monolithic CMOS construction supports bidirectional signal conduction and low power consumption. The DG419 family is also described as providing low charge injection, which is important when switching signals into sampling capacitors. Manufacturer documentation states a minimum ESD tolerance of 2000 V per Method 3015.7. These characteristics make the switch suitable for precision analog routing where insertion resistance, switching transients, leakage, and signal integrity affect overall measurement accuracy.
Typical applications include multimeter and oscilloscope input routing, automated test-equipment signal paths, sensor-selection networks, sample-and-hold front ends, and industrial measurement systems. In these systems, the switch can reduce the number of external relays and reduce the number of amplifiers, while providing consistent analog paths across multiple channels. The common package also supports legacy instrument and test-system designs that use 8-pin ceramic DIP footprints.
Designers should verify supply-voltage limits, signal-range limits, switching-time requirements, leakage, charge injection, and control-logic thresholds against the manufacturer datasheet before production. Pay particular attention to break-before-make behavior, off-state isolation, and the external clock or control signal used to change the selected path. Prototype layouts should preserve the footprint and pin assignment of the original ceramic DIP design when evaluating a replacement.
This page organizes the DG419AK technical characteristics, sourcing information, comparison criteria, and practical design guidance. It also distinguishes the confirmed 8-CERDIP replacement path from electrically similar parts offered in other packages, helping engineers evaluate PCB compatibility before making a drop-in substitution.
এর জন্য ড্রপ-ইন বিকল্প DG419AK — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
ADG419BNZ
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
DG419AK সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Number of Circuits | 1 circuit |
| Switch Configuration | 2:1 SPDT |
| On-Resistance | 35 Ω |
| Alternate Catalog On-Resistance | 30 Ω |
| On-Resistance Matching | 3 Ω maximum |
| On-Resistance Flatness | 4 Ω maximum |
| Technology | CMOS |
| Signal Conduction Direction | Bidirectional |
| ESD Tolerance | 2000 V minimum per Method 3015.7 |
| Power Consumption | Low |
| প্যাকেজ | 8-pin CERDIP |
| মাউন্টিং টাইপ | Through-hole |
DG419AK 8-pin cerdip পিন কনফিগারেশন গাইড
DG419AK (8-pin cerdip প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি DG419AK.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
DG419AK এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Precision Multimeter Signal Routing, Automated Test Equipment, Sensor Multiplexing, Sample-and-Hold Front End, Oscilloscope Input Switching, Industrial Control Signal Routing.
Precision Multimeter Signal Routing
The DG419AK can select between two analog measurement paths when a meter needs to compare or isolate input sources. Its 2:1 SPDT topology avoids multiple relays, while the manufacturer's 3 Ω maximum on-resistance matching and 4 Ω maximum flatness help limit channel-dependent divider errors. The 35 Ω catalog on-resistance must still be included in the input-impedance calculation. Confirm leakage and charge-injection limits against the datasheet when switching into a high-gain front end.
সুপারিশকৃত
Automated Test Equipment
The DG419AK is suitable for routing test signals between a measurement instrument and two fixture or DUT paths. The single SPDT switch reduces mechanical relay count and supports bidirectional signal flow, while the family's 3 Ω maximum on-resistance matching helps maintain more consistent channel attenuation. Because switch resistance combines with fixture leakage and cable capacitance, evaluate the complete acquisition path. The 2000 V minimum ESD tolerance reported for the family does not eliminate the need for normal external ESD protection.
সুপারিশকৃত
Sensor Multiplexing
The DG419AK can route one amplifier or ADC input between two sensor-derived signals without changing the downstream conditioning chain. Its 2:1 configuration is useful when comparing a reference channel with a measurement channel, and the family's low charge injection can reduce transient disturbance at the selected input. The design must account for the 35 Ω nominal on-resistance, input leakage, and sampling settling time. Keep the high-impedance sensor trace short and confirm that leakage remains below the sensor's error budget.
সুপারিশকৃত
Sample-and-Hold Front End
The DG419AK can select an input immediately before a sampling or hold stage in instrumentation that must capture one of two analog sources. Low charge injection, a documented feature of the DG419 family, helps limit the transient delivered to a high-impedance sampling node. Switching time, switch capacitance, leakage, and source impedance must be included in the settling calculation for the selected acquisition rate. Verify that the control signal changes with sufficient break time before the sample command is issued.
সুপারিশকৃত
Oscilloscope Input Switching
The DG419AK can route either of two low-frequency analog signals into an oscilloscope or comparator input where a compact SPDT switch is acceptable. Bidirectional CMOS conduction provides flexibility in test layouts, while the family's 3 Ω maximum matching and 4 Ω maximum flatness help reduce path-to-path attenuation changes. High-impedance scope inputs can magnify leakage and charge-injection errors, so confirm those limits and maintain a short switched trace. The switch should not replace a high-bandwidth RF mechanism in designs requiring wide signal-range coverage.
সুপারিশকৃত
Industrial Control Signal Routing
The DG419AK can route a control or feedback signal between two analog sources in an industrial measurement or control module. Its monolithic CMOS implementation supports low power consumption and bidirectional operation, which can simplify signal routing around legacy 8-CERDIP assemblies. The catalog on-resistance of 35 Ω must be acceptable for the driven load, while leakage and supply limitations must be checked for long-duration operation. For safety-critical installations, verify the device's environmental qualification, isolation strategy, and failure-mode requirements separately.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা DG419AK — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | ADG419BNZ |
|---|---|---|
| Package | 8-pin CERDIP | 8-pin CERDIP |
| Brand | Vishay Siliconix | Analog Devices |
| Switch Configuration | 2:1 SPDT | SPDT |
| Number of Circuits | 1 circuit | 1 circuit |
| On-Resistance | 35 Ω | 30 Ω in the DG419AK catalog comparison |
| Technology | Monolithic CMOS | CMOS analog switch |
| Signal Conduction Direction | Bidirectional | Bidirectional |
মূল পার্থক্যসমূহ
- Maintains the original 8-CERDIP footprint during replacement (বনামADG419BNZ)
- Uses the established Vishay DG419 family architecture (বনামADG419BNZ)
- Offers a documented 30 Ω on-resistance catalog comparison (বনামADG419BNZ)
ডিজাইন নোট
Include the switch on-resistance in the complete source-impedance calculation rather than treating it as an ideal conductor. The DG419AK is listed at 35 Ω, and another DG419AK catalog record lists 30 Ω, so the applicable datasheet revision should control the design. For a high-impedance amplifier input, resistance creates attenuation and noise gain, while switch leakage and temperature can dominate total error. Validate the complete source, switch, amplifier, and protection network over the intended signal range.
Do not substitute a part solely because it is an SPDT switch or uses an 8-pin package. Confirm the physical ceramic-DIP footprint, pin numbering, control-logic thresholds, supply rails, analog range, and timing before replacing the DG419AK. A common error is assuming that equal package pin count guarantees pin compatibility. Compare the manufacturer pin-description table and schematic function of every connection, particularly control inputs, common terminals, and supply pins.
Keep the switched node compact and connect the device supply pins to a low-impedance return path. Place any input protection, bypass capacitance, and termination close to the associated switch or amplifier pins rather than allowing the analog trace to loop around the PCB. Because charge injection can produce a temporary voltage error on a high-impedance node, use short traces and provide adequate settling time before sampling. Confirm the complete path against the 3 Ω maximum family matching and 4 Ω maximum flatness claims.
Verify supply-voltage tolerance and power-consumption behavior over the full temperature range before enabling the analog path. The manufacturer describes the DG419 family as low-power CMOS, but quiescent current, control-state current, and the allowable supply combination must come from the device datasheet. Use a stable control reference and avoid allowing a floating control input to create uncertain switch states during power-up or power-down, especially in unattended test equipment.
কমপ্লায়েন্স তথ্য
No explicit compliance declarations are stated for the DG419AK in the cited catalog records. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification status with the manufacturer for the exact ordering code and current documentation.