NI

DG419AK - 35Ω SPDT CMOS Analog Switch | Vishay Siliconix

部品番号: DG419AK ✓ 生産中
35 Ω Rds(on) 8-pin CERDIP Package
MOQ: 1 |

DG419AK 概要

The Vishay Siliconix DG419AK is a single-circuit, 2:1 SPDT CMOS analog switch with a listed on-resistance of 35 Ω, supplied in an 8-pin CERDIP package. It is designed to route analog signals by connecting one common terminal to either of two independent input terminals. The DG419 family provides low power consumption, low charge injection, low on-resistance matching, and a flat on-resistance characteristic across the analog signal range.

An analog switch is an integrated semiconductor device that controls the path of voltage or current signals without mechanically moving a contact. The DG419AK belongs to the interface-IC hierarchy, where CMOS analog switches connect sensors, amplifiers, converters, test circuits, and other signal-processing blocks. Its SPDT configuration makes it useful where one signal path must be selected from two sources, including test and measurement, data acquisition, and industrial control systems.

The manufacturer describes the DG419 family's redesigned precision switches as having guaranteed on-resistance matching of 3 Ω maximum between switches and guaranteed on-resistance flatness of 4 Ω maximum over the signal range. These characteristics help reduce channel-dependent gain errors when the same switch is used for multiple paths. The DG419AK listing also identifies a 35 Ω on-resistance, while another catalog record for the DG419AK lists 30 Ω.

The monolithic CMOS construction supports bidirectional signal conduction and low power consumption. The DG419 family is also described as providing low charge injection, which is important when switching signals into sampling capacitors. Manufacturer documentation states a minimum ESD tolerance of 2000 V per Method 3015.7. These characteristics make the switch suitable for precision analog routing where insertion resistance, switching transients, leakage, and signal integrity affect overall measurement accuracy.

Typical applications include multimeter and oscilloscope input routing, automated test-equipment signal paths, sensor-selection networks, sample-and-hold front ends, and industrial measurement systems. In these systems, the switch can reduce the number of external relays and reduce the number of amplifiers, while providing consistent analog paths across multiple channels. The common package also supports legacy instrument and test-system designs that use 8-pin ceramic DIP footprints.

Designers should verify supply-voltage limits, signal-range limits, switching-time requirements, leakage, charge injection, and control-logic thresholds against the manufacturer datasheet before production. Pay particular attention to break-before-make behavior, off-state isolation, and the external clock or control signal used to change the selected path. Prototype layouts should preserve the footprint and pin assignment of the original ceramic DIP design when evaluating a replacement.

This page organizes the DG419AK technical characteristics, sourcing information, comparison criteria, and practical design guidance. It also distinguishes the confirmed 8-CERDIP replacement path from electrically similar parts offered in other packages, helping engineers evaluate PCB compatibility before making a drop-in substitution.

ドロップイン代替品: DG419AK — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

ADG419BNZ

✅ ドロップイン
📦 8-pin CERDIP
Same 8-CERDIP SPDT footprint; catalog on-resistance is listed as 30 Ω versus 35 Ω for DG419AK, a 5 Ω or 14% lower rating.

📋 参考代替品(カタログ未掲載)

DG419AK 最大定格&電気的特性

Number of Circuits 1 circuit
Switch Configuration 2:1 SPDT
On-Resistance 35 Ω
Alternate Catalog On-Resistance 30 Ω
On-Resistance Matching 3 Ω maximum
On-Resistance Flatness 4 Ω maximum
Technology CMOS
Signal Conduction Direction Bidirectional
ESD Tolerance 2000 V minimum per Method 3015.7
Power Consumption Low
パッケージ 8-pin CERDIP
実装タイプ Through-hole

DG419AK 8-pin cerdip ピン配置ガイド

DG419AK (8-pin cerdip パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

DG419AK の 8-pin cerdip パッケージピン配置図

詳細なピン配置データはありません: DG419AK.

詳細は データシート をご参照ください。

主な用途

DG419AK の用途: 6 件s: Precision Multimeter Signal Routing, Automated Test Equipment, Sensor Multiplexing, Sample-and-Hold Front End, Oscilloscope Input Switching, Industrial Control Signal Routing.

🔧

Precision Multimeter Signal Routing

The DG419AK can select between two analog measurement paths when a meter needs to compare or isolate input sources. Its 2:1 SPDT topology avoids multiple relays, while the manufacturer's 3 Ω maximum on-resistance matching and 4 Ω maximum flatness help limit channel-dependent divider errors. The 35 Ω catalog on-resistance must still be included in the input-impedance calculation. Confirm leakage and charge-injection limits against the datasheet when switching into a high-gain front end.

🏭

Automated Test Equipment

The DG419AK is suitable for routing test signals between a measurement instrument and two fixture or DUT paths. The single SPDT switch reduces mechanical relay count and supports bidirectional signal flow, while the family's 3 Ω maximum on-resistance matching helps maintain more consistent channel attenuation. Because switch resistance combines with fixture leakage and cable capacitance, evaluate the complete acquisition path. The 2000 V minimum ESD tolerance reported for the family does not eliminate the need for normal external ESD protection.

🧩

Sensor Multiplexing

The DG419AK can route one amplifier or ADC input between two sensor-derived signals without changing the downstream conditioning chain. Its 2:1 configuration is useful when comparing a reference channel with a measurement channel, and the family's low charge injection can reduce transient disturbance at the selected input. The design must account for the 35 Ω nominal on-resistance, input leakage, and sampling settling time. Keep the high-impedance sensor trace short and confirm that leakage remains below the sensor's error budget.

📺

Sample-and-Hold Front End

The DG419AK can select an input immediately before a sampling or hold stage in instrumentation that must capture one of two analog sources. Low charge injection, a documented feature of the DG419 family, helps limit the transient delivered to a high-impedance sampling node. Switching time, switch capacitance, leakage, and source impedance must be included in the settling calculation for the selected acquisition rate. Verify that the control signal changes with sufficient break time before the sample command is issued.

📡

Oscilloscope Input Switching

The DG419AK can route either of two low-frequency analog signals into an oscilloscope or comparator input where a compact SPDT switch is acceptable. Bidirectional CMOS conduction provides flexibility in test layouts, while the family's 3 Ω maximum matching and 4 Ω maximum flatness help reduce path-to-path attenuation changes. High-impedance scope inputs can magnify leakage and charge-injection errors, so confirm those limits and maintain a short switched trace. The switch should not replace a high-bandwidth RF mechanism in designs requiring wide signal-range coverage.

🏭

Industrial Control Signal Routing

The DG419AK can route a control or feedback signal between two analog sources in an industrial measurement or control module. Its monolithic CMOS implementation supports low power consumption and bidirectional operation, which can simplify signal routing around legacy 8-CERDIP assemblies. The catalog on-resistance of 35 Ω must be acceptable for the driven load, while leakage and supply limitations must be checked for long-duration operation. For safety-critical installations, verify the device's environmental qualification, isolation strategy, and failure-mode requirements separately.

おすすめ製品の概要

ADG419BNZ 8-CERDIP SPDT replacement candidate for legacy routing boards 使用用途: Precision Multimeter Signal Routing, Automated Test Equipment, Sensor Multiplexing, Sample-and-Hold Front End, Oscilloscope Input Switching, Industrial Control Signal Routing DG419DY+ Analog Devices 使用用途: Precision Multimeter Signal Routing, Sample-and-Hold Front End DG408DJ+ Analog Devices 使用用途: Automated Test Equipment DG418DJ+ Analog Devices 使用用途: Sensor Multiplexing DG408DY+ Analog Devices 使用用途: Oscilloscope Input Switching DG444DJ+ Analog Devices 使用用途: Industrial Control Signal Routing
What is the DG419AK?
The DG419AK is a single-circuit, 2:1 SPDT CMOS analog switch in an 8-pin CERDIP package. Vishay Siliconix lists its on-resistance as 35 Ω, while another catalog record lists 30 Ω for the DG419AK. According to the manufacturer product page, the DG419 family provides guaranteed on-resistance matching of 3 Ω maximum and on-resistance flatness of 4 Ω maximum over the signal range.
What are the key specifications of DG419AK that engineers should know?
The DG419AK combines a 2:1 SPDT configuration, monolithic CMOS construction, bidirectional conduction, and an 8-pin CERDIP package. Manufacturer documentation identifies on-resistance matching of 3 Ω maximum and on-resistance flatness of 4 Ω maximum. Catalog listings report either 35 Ω or 30 Ω on-resistance, so the value should be checked against the applicable device revision and operating conditions before design release.
Where can I download the DG419AK datasheet PDF?
The DG419AK datasheet can be obtained from the official Analog Devices DG419 product page at https://www.analog.com/en/products/dg419.html or from the Vishay datasheet listing at https://www.datasheets.com/vishay/dg419ak. The manufacturer documentation covers the DG417, DG418, and DG419 precision CMOS analog-switch family. Use the pin-description table in that document when assigning signals for an 8-pin CERDIP PCB.
Where can I find the DG419AK pinout?
Use the official DG419 manufacturer documentation for the authoritative DG419AK pinout and package drawing. The DG419AK is an 8-pin CERDIP device, and the manufacturer pin-description table must be cross-checked against the PCB footprint before assembly. The catalog listings confirm the package and switching function, but they do not reproduce the complete pin assignment, so use the datasheet rather than inferring connections from package position.
What can replace the DG419AK?
The ADG419BNZ is the documented cross-brand replacement candidate for the DG419AK because both are identified as compatible with an 8-CERDIP layout and provide the same SPDT switching function. According to the replacement listing, both can be used in most existing 8-CERDIP layouts. Confirm control thresholds, supply voltage, switching timing, leakage, and signal-range limits in the current manufacturer datasheet before substitution.
Is the ADG419BNZ a drop-in replacement for the DG419AK?
Yes, the ADG419BNZ is identified as pin-compatible with the DG419AK in most 8-CERDIP layouts. Both devices are single SPDT switches, and the cross-reference record explicitly describes them as drop-in replacements. A responsible qualification should still compare the supply rails, control-input thresholds, on-resistance, leakage, charge injection, and switching-time limits because a matching footprint alone does not guarantee identical system behavior.
What is the best Analog Devices equivalent for the DG419AK?
The ADG419BNZ is the best documented Analog Devices equivalent for an 8-CERDIP DG419AK installation. The replacement record identifies it as functionally and pin-compatible with the DG419AK and suitable for existing 8-CERDIP layouts. The Vishay listing reports 35 Ω on-resistance for DG419AK, while another DG419AK catalog record reports 30 Ω, making a datasheet-level review of ADG419BNZ electrical limits essential before approval.
DG419AK vs ADG419BNZ - which is better for a legacy instrument?
Choose the DG419AK when preserving the originally qualified Vishay Siliconix device and its documented electrical behavior is the priority; choose the ADG419BNZ when a documented 8-CERDIP-compatible source is needed for a legacy instrument. Both are SPDT switches, but replacement decisions should compare the specific manufacturer revision, supply voltage, control levels, on-resistance, switching speed, leakage, and ESD ratings rather than relying only on the shared footprint.
When should I choose the DG419AK over the ADG419BNZ?
Choose the DG419AK when maintaining the original Vishay Siliconix qualification is more important than changing manufacturers. It is a 2:1 SPDT CMOS analog switch in an 8-pin CERDIP package with manufacturer-family specifications of 3 Ω maximum on-resistance matching and 4 Ω maximum flatness. Select the ADG419BNZ only after its datasheet confirms that its supply, control logic, analog range, leakage, and timing satisfy the original circuit requirements.
Is the DG419AK suitable for precision analog signal routing?
The DG419AK is suitable for precision analog routing when its resistance variation and switching transients meet the system error budget. According to the manufacturer product page, the DG419 family guarantees on-resistance matching of 3 Ω maximum and flatness of 4 Ω maximum while providing low charge injection and low power consumption. The final error budget should include amplifier input noise, leakage, settling time, switch resistance, and the transient produced at each channel transition.
What design considerations matter for a DG419AK analog switch?
Verify the control thresholds, supply voltage, analog signal range, switching time, leakage, and break-before-make behavior against the manufacturer datasheet. Keep the switched node away from long, high-impedance traces where charge injection can produce settling errors. If the switch drives a sampling capacitor, include the switch capacitance and charge injection in the acquisition settling calculation rather than evaluating only the nominal 35 Ω or 30 Ω on-resistance.
How does on-resistance matching affect DG419AK measurement accuracy?
On-resistance matching affects accuracy because different switch paths can introduce different voltage-divider errors when driving a finite input impedance. The manufacturer states that the DG419 family guarantees on-resistance matching of 3 Ω maximum between switches, while on-resistance flatness is guaranteed at 4 Ω maximum over the signal range. This makes channel-to-channel resistance variation more predictable, although the absolute 35 Ω or 30 Ω catalog rating still creates insertion loss that must be included in the signal chain.
Does the DG419AK support bidirectional analog signal conduction?
Yes, the DG419AK supports bidirectional analog signal conduction as part of the monolithic CMOS DG419 switch family. Bidirectional operation means the selected switch path can carry a signal in either direction, which is useful for instrumentation, test, and signal-routing circuits. The power and ground connections still define the usable signal range, so the analog input must remain within the limits stated in the manufacturer datasheet.
Where to buy DG419AK online?
Use the Request a Quote form on this page to request DG419AK availability, lot traceability, and a commercial quotation for the required quantity. The device is an 8-pin CERDIP SPDT analog switch, and exact ordering information should include the manufacturer name and DG419AK suffix. XAIPART can confirm current sourcing and lead time through the quote request rather than presenting a stale inventory or market figure.
What is the price of the DG419AK?
Use the Request a Quote form on this page for the current DG419AK price and volume-based commercial terms. Because ceramic-DIP availability and traceability can vary by lot, the quote should be reviewed alongside the requested delivery date and quantity. The product page does not present a static price because the final figure depends on the current sourcing channel and customer order requirements.
What is the lead time and stock status for the DG419AK?
Request the current lead time, minimum order quantity, and stock position through the Request a Quote form on this page. The DG419AK is actively listed as an 8-CERDIP SPDT switch, but a distributor description alone does not establish the quantity available for a specific purchase order. For production planning, include the required delivery date, acceptable date codes, and any traceability requirements in the request.

エンジニアリング参考データ: DG419AK — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the DG419AK when maintaining the original Vishay Siliconix qualification is more important than changing manufacturers, particularly in a legacy 8-CERDIP instrument or test board. Choose the ADG419BNZ when a documented 8-CERDIP-compatible cross-brand option is required and its current datasheet confirms equivalent supply, control, timing, leakage, and signal-range behavior. A common package alone is insufficient: verify the pin-description table, analog voltage range, switching characteristics, and off-state isolation before substitution. For new designs, evaluate whether a modern smaller-package SPDT switch offers better availability, lower capacitance, or improved switching performance; those options may require a PCB change but can provide a better system solution than preserving the legacy footprint.

代替品との比較

パラメータ この製品 ADG419BNZ
Package 8-pin CERDIP 8-pin CERDIP
Brand Vishay Siliconix Analog Devices
Switch Configuration 2:1 SPDT SPDT
Number of Circuits 1 circuit 1 circuit
On-Resistance 35 Ω 30 Ω in the DG419AK catalog comparison
Technology Monolithic CMOS CMOS analog switch
Signal Conduction Direction Bidirectional Bidirectional

主な差別化要因

  • Maintains the original 8-CERDIP footprint during replacement (vs ADG419BNZ)
  • Uses the established Vishay DG419 family architecture (vs ADG419BNZ)
  • Offers a documented 30 Ω on-resistance catalog comparison (vs ADG419BNZ)

設計ノート

Include the switch on-resistance in the complete source-impedance calculation rather than treating it as an ideal conductor. The DG419AK is listed at 35 Ω, and another DG419AK catalog record lists 30 Ω, so the applicable datasheet revision should control the design. For a high-impedance amplifier input, resistance creates attenuation and noise gain, while switch leakage and temperature can dominate total error. Validate the complete source, switch, amplifier, and protection network over the intended signal range.

Do not substitute a part solely because it is an SPDT switch or uses an 8-pin package. Confirm the physical ceramic-DIP footprint, pin numbering, control-logic thresholds, supply rails, analog range, and timing before replacing the DG419AK. A common error is assuming that equal package pin count guarantees pin compatibility. Compare the manufacturer pin-description table and schematic function of every connection, particularly control inputs, common terminals, and supply pins.

Keep the switched node compact and connect the device supply pins to a low-impedance return path. Place any input protection, bypass capacitance, and termination close to the associated switch or amplifier pins rather than allowing the analog trace to loop around the PCB. Because charge injection can produce a temporary voltage error on a high-impedance node, use short traces and provide adequate settling time before sampling. Confirm the complete path against the 3 Ω maximum family matching and 4 Ω maximum flatness claims.

Verify supply-voltage tolerance and power-consumption behavior over the full temperature range before enabling the analog path. The manufacturer describes the DG419 family as low-power CMOS, but quiescent current, control-state current, and the allowable supply combination must come from the device datasheet. Use a stable control reference and avoid allowing a floating control input to create uncertain switch states during power-up or power-down, especially in unattended test equipment.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

No explicit compliance declarations are stated for the DG419AK in the cited catalog records. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification status with the manufacturer for the exact ordering code and current documentation.

データ検証日: 2026-11-10 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

DG419AK datasheet DG419AK datasheet pdf DG419AK pinout DG419AK specifications DG419AK equivalent DG419AK replacement DG419AK vs ADG419BNZ DG419AK 8-CERDIP footprint DG419AK SPDT analog switch DG419AK on resistance DG419AK price DG419AK stock Vishay Siliconix DG419AK DG419AK application circuit

関連部品&用語

Vishay Siliconix Analog Devices DG419AK ADG419BNZ DG419 family SPDT analog switch 2:1 analog switch CMOS integrated circuit interface IC semiconductor bidirectional signal conduction on-resistance on-resistance matching on-resistance flatness charge injection 8-pin CERDIP ceramic DIP through-hole package analog signal routing test and measurement sensor multiplexing sample-and-hold ESD tolerance Method 3015.7
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示