Texas Instruments

DS90CR288MTD - 28-Bit 75MHz LVDS Receiver | Texas Instruments

MPN: DS90CR288MTD ✓ সক্রিয়
3 V to 3.6 V Vdss 56-TSSOP Package 75 MHz Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

DS90CR288MTD সারাংশ

Texas Instruments DS90CR288MTD is a 28-bit, four-data-channel LVDS receiver operating from a 3 V to 3.6 V supply at up to 75 MHz in a 56-pin TSSOP package. It is designed for Channel Link data transmission over balanced interconnects, recovering four LVDS data streams and associated clock information from a transmitting device such as the DS90CR285 family.

A channel-link receiver is an interface IC that converts low-voltage differential signaling into parallel CMOS or TTL-compatible data. LVDS belongs to the broader differential-signal interface hierarchy, where low voltage swing, common-mode control, and balanced routing reduce susceptibility to noise. The DS90CR288MTD is consequently positioned between external data-transmission hardware and the digital logic, FPGA, display, or image-processing subsystem that consumes the recovered parallel data.

The device supports 28 bits across four receiver channels and uses rising-edge data-strobe signaling. Its stated operating frequency is 75 MHz, while its 3 V to 3.6 V supply range suits 3.3 V digital systems. The receiver architecture is intended for point-to-point cable or PCB links carrying serialized parallel data, including video, imaging, control, and industrial communication systems. The transmitter converts parallel source data into differential LVDS streams, while the receiver performs the complementary conversion at the far end of the link.

The 56-TSSOP package provides a practical surface-mount interface for systems requiring 28 parallel data bits and several control and power pins. Because the part exposes many high-speed and low-voltage signals, layout quality directly affects signal integrity. Differential impedance-controlled routing, matched pair length adjustment, a solid ground plane, and careful separation from noisy power converters are important. Input and bypass connections should also be arranged to minimize loop area and maintain a clean return path.

DS90CR288MTD is appropriate when the system already uses a compatible Channel Link transmitter and requires a dedicated 28-bit LVDS receiver. The interface is preferable to converting parallel data through a general-purpose transceiver when the PCB already contains the required 56-TSSOP footprint. The main engineering trade-off is that this is a specialized receiver: its function, pinout, supply requirements, and data-strobe convention must match the transmitter and the receiving logic.

For reliable implementation, use the manufacturer datasheet pin description, recommended decoupling, and reference-layout guidance without modification. Confirm the exact clock topology, input mapping, termination arrangement, exposed-pad requirements, and signal amplitudes during schematic review. This page combines the confirmed operating characteristics, packaging information, sourcing structure, and engineering guidance needed to evaluate DS90CR288MTD before committing the PCB layout.

Once the transmitter, receiver, and downstream logic are verified as a complete link, DS90CR288MTD provides a direct 28-bit LVDS receiving path in 3.3 V systems. Its fixed protocol and package make design reuse straightforward, but pin-level compatibility and link-level timing must be checked rather than assumed from the Channel Link label alone.

এর জন্য ড্রপ-ইন বিকল্প DS90CR288MTD — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

DS90CR288AMTD

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 56-TSSOP
DS90CR288A revision with the same 28-bit, 75 MHz channel-link ratings; revision-specific limits require datasheet comparison

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

DS90CR288A

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 56-TSSOP
Same 28-bit, 75 MHz family architecture with a different revision suffix; package and qualification suffix must be completed before ordering

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

DS90CR288MTD বিশেষণ

Product Type 28-bit LVDS Channel Link receiver
Number of Drivers/Receivers 4/28
Receiver Type Receiver
Supply Voltage Range 3 V to 3.6 V
Nominal Supply Voltage 3.3 V
Data Rate or Clock Frequency 75 MHz
Number of Data Bits 28 bits
Number of Data Channels 4 channels
Signaling Protocol LVDS
Data-Strobe Edge Rising edge
প্যাকেজ 56-TSSOP
Package Width 0.240 inch
Package Length 6.10 mm
পিনের সংখ্যা 56 pins
মাউন্টিং টাইপ Surface mount
Packaging Tube

DS90CR288MTD 6.10 mm পিন কনফিগারেশন গাইড

DS90CR288MTD (6.10 mm প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

DS90CR288MTD-এর জন্য 6.10 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি DS90CR288MTD.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

DS90CR288MTD এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Camera Data Links, Video Processing Backplanes, FPGA Sensor Data Acquisition, Medical Imaging Interfaces, High-Speed Control Data Transport, Test and Measurement Equipment.

📷

Industrial Camera Data Links

The DS90CR288MTD fits industrial imaging systems that transfer 28 bits of parallel camera data across a short, noise-sensitive LVDS connection. Its four receiver channels recover the transmitted differential streams at up to 75 MHz, while the 3 V to 3.6 V supply range integrates naturally with 3.3 V imaging logic. Place the receiver near the cable or board-to-board connector, match each differential pair, and provide local supply decoupling. The link can simplify cable reach and signal integrity compared with routing 28 single-ended lines over a long interconnect.

🖥️

Video Processing Backplanes

The DS90CR288MTD is suitable for recovering a 28-bit video stream on a backplane or multi-board system where parallel routing would increase noise and skew risk. The device accepts four LVDS data channels and operates at up to 75 MHz, providing a defined receiving endpoint for a compatible Channel Link transmitter. Designers should control differential impedance, maintain pair-length balance, and separate the link from switching regulators and high-current digital returns. The recovered parallel data can then feed an FPGA or dedicated video processor without adding another external line receiver.

⚡

FPGA Sensor Data Acquisition

The DS90CR288MTD can serve as the receiving element in an FPGA-based sensor acquisition chain that receives 28 bits over four LVDS channels. A compatible transmitter serializes sensor or ADC data, and the receiver returns it to parallel form for FPGA capture at the stated 75 MHz operating limit. The 3.3 V supply requirement supports integration with contemporary programmable logic. Engineering attention should focus on clock alignment, connector or cable return paths, receiver placement near the source, and verifying that recovered data timing meets the FPGA input constraints.

💊

Medical Imaging Interfaces

The DS90CR288MTD can participate in medical imaging equipment where an image-acquisition board transfers a wide parallel data stream across an internal balanced link. Its 28-bit capacity and four LVDS receiver channels reduce the number of sensitive single-ended traces, while the 75 MHz operating limit defines the supported link rate. The component does not perform diagnostics or image processing itself, so system validation must cover clocking, data integrity, isolation requirements, and applicable medical standards. Use the manufacturer electrical characteristics and application guidance to establish the final channel margin.

🏭

High-Speed Control Data Transport

The DS90CR288MTD is appropriate for industrial control systems that need a compact, dedicated path for a 28-bit command or status bus. Four LVDS channels can carry the data across a board-to-board connection while limiting signal-current excursions and improving noise tolerance relative to long single-ended routing. The receiver's 3 V to 3.6 V operating range supports 3.3 V control logic, while its 75 MHz ceiling provides ample margin for many command and configuration paths. Validate latency, clock recovery behavior, and fault tolerance against the system's safety requirements.

🔧

Test and Measurement Equipment

The DS90CR288MTD can receive a wide parallel data path in test and measurement instruments that exchange captured, generated, or processed data between circuit boards. Four differential channels provide a practical way to move 28 bits without routing every bit as a single-ended board trace. At the 3.3 V nominal supply and 75 MHz operating limit, the receiver is suited to controlled internal interconnects rather than unrestricted cable use. Designers should evaluate connector loss, grounding, shielding, and clock architecture, then verify the complete transmitter-to-receiver path during signal-integrity testing.

What is the DS90CR288MTD?
The DS90CR288MTD is a 28-bit, four-channel LVDS receiver designed for 3.3 V Channel Link links operating up to 75 MHz. According to the Texas Instruments DS90CR288 datasheet, it converts four differential LVDS data streams into parallel data for digital logic and is packaged in a 56-pin TSSOP. It is a receiver only, so the system also requires a compatible transmitter such as the DS90CR285 family.
What is the operating voltage of DS90CR288MTD?
The DS90CR288MTD operates from 3 V to 3.6 V, with 3.3 V identified as the nominal supply condition. The Texas Instruments DS90CR288 datasheet identifies the device as a +3.3 V rising-edge data-strobe LVDS receiver. Designers should design the board for the full 3 V to 3.6 V range, including decoupling, signal-level compatibility, and worst-case supply tolerance across temperature.
How many data channels does DS90CR288MTD support?
The DS90CR288MTD supports four differential receiver channels carrying 28 data bits in total. The Texas Instruments datasheet describes it as a 28-bit Channel Link receiver with four driver and receiver channels and an operating frequency of 75 MHz. This allows one dedicated receiver package to recover a wide parallel bus after it has been serialized and transmitted as differential data.
Where can I download the DS90CR288MTD datasheet PDF?
The DS90CR288MTD datasheet PDF is available through the Texas Instruments product and technical-document links for DS90CR288. The document identifies the device as a +3.3 V rising-edge data-strobe LVDS 28-bit Channel Link receiver rated for 75 MHz. Use the pin-description table, electrical-characteristics tables, and application information to confirm PCB connections before releasing the layout.
Where is the DS90CR288MTD pinout?
The DS90CR288MTD pinout is documented in the pin-configuration section of the Texas Instruments DS90CR288 datasheet and corresponds to its 56-pin TSSOP package. The package contains four LVDS data channels, associated clock and control functions, supply pins, and ground pins. Use the manufacturer pin table rather than inferring connections from another Channel Link receiver because enable, clock, and ground assignments can differ between families.
Can DS90CR285MTD work with DS90CR288MTD?
The DS90CR285MTD is the complementary 66 MHz Channel Link transmitter associated with the 28-bit DS90CR288 75 MHz receiver family. Their functions match at the link level, but the operating-frequency ratings differ by 9 MHz. The transmitter serializes parallel CMOS/TTL data into four LVDS streams, while the DS90CR288MTD recovers those streams. Confirm clocking, timing, and signal compatibility in the transmitter and receiver datasheets before using the pair.
What is the difference between DS90CR288MTD and DS90CR285MTD?
The DS90CR288MTD is a 75 MHz four-channel LVDS receiver, while the DS90CR285MTD is a 66 MHz four-channel LVDS transmitter. The receiver accepts differential LVDS inputs and produces parallel data, whereas the transmitter accepts parallel CMOS/TTL data and produces differential outputs. Both use 56-TSSOP packages, but their opposite directions make them complementary link components rather than interchangeable substitutes.
What is the best drop-in replacement for DS90CR288MTD?
No confirmed drop-in replacement for the DS90CR288MTD was identified among the available cross-reference results. A valid replacement must preserve the 56-TSSOP footprint, all 28 receiver bits, four LVDS channels, rising-edge data-strobe behavior, 3 V to 3.6 V operation, and the clock and control functions. The DS90CR285MTD is a transmitter rather than a receiver, so it cannot replace this part. Submit the required MPN and system conditions through the Request a Quote form for sourcing assistance.
Is DS90CR288MTD pin-compatible with other Channel Link receivers?
DS90CR288MTD is pin-compatible only with a receiver that exactly matches its 56-TSSOP pinout and signal functions. The Channel Link family name alone does not establish interchangeability because transmitters, receivers, clocking arrangements, enable controls, and newer device revisions can use different assignments. Review the manufacturer pin tables for every candidate and compare all supply, ground, clock, data, and differential-pair connections before treating a replacement as drop-in compatible.
When should I choose DS90CR288MTD over a generic LVDS receiver?
Choose DS90CR288MTD when the design uses the 28-bit Channel Link architecture, needs four LVDS data channels, and already has a compatible transmitter and 56-TSSOP board layout. A generic LVDS receiver may support fewer lanes, different input thresholds, different output logic, or a different package. The specialized receiver simplifies interface reuse, while a generic device can offer broader lane-count flexibility when PCB redesign and protocol adaptation are acceptable.
Is DS90CR288MTD suitable for video and imaging links?
The DS90CR288MTD is suitable for compatible 28-bit video or imaging data links when the transmitter, clocking scheme, pixel format, and downstream logic match its Channel Link interface. Its 28 parallel data bits and four LVDS channels can recover a wide data stream from a serialized link. The receiver does not independently define pixel timing, color format, or refresh rate, so those functions must be verified elsewhere in the system.
How should I route the LVDS connections on DS90CR288MTD PCB?
Route each LVDS pair as a tightly coupled differential pair with continuous reference-plane support and length matching appropriate to the implemented topology. Keep the receiver and bypass connections close to the device, minimize vias, and avoid routing beneath noisy switching nodes. According to the Texas Instruments application guidance, controlled impedance and careful connector or cable transitions are essential because discontinuities and unequal routing can reduce signal margin.
What power and thermal considerations apply to DS90CR288MTD?
DS90CR288MTD requires a stable 3 V to 3.6 V supply and correct decoupling close to its power pins. Although the receiver generally dissipates less power than a high-speed transmitter, layout errors can increase current or create unstable signal behavior. Follow the Texas Instruments recommended capacitor values and placement, provide an uninterrupted ground return, and verify temperature-rise behavior in the final enclosure rather than relying on package size alone.
What is the lifecycle status of DS90CR288MTD?
DS90CR288MTD is treated as an active catalog device for this page because current Texas Instruments and distributor catalog records continue to identify the part and its 56-TSSOP ordering configuration. Production planners should still request a written lifecycle and traceability confirmation for the exact MPN before committing a long-running program. Use the Request a Quote form on this page to obtain current availability, lot traceability, and manufacturing-life information.
Where can I buy DS90CR288MTD and check the current lead time?
Use the Request a Quote form on this page to request DS90CR288MTD pricing, stock, current lead time, tube quantity, and lot traceability. The form gives buyers one direct sourcing channel without relying on changing public price tables. For production planning, specify the required quantity, approved manufacturer origin, date code policy, and whether assembled or broken-lot material is acceptable. No static price or lead-time figure should be treated as a quotation.
What are the key specifications of DS90CR288MTD that engineers should know?
The key DS90CR288MTD specifications are a 3 V to 3.6 V supply, 75 MHz operating frequency, 28 recovered data bits, four LVDS receiver channels, rising-edge data-strobe signaling, and a 56-pin TSSOP package. The Texas Instruments datasheet identifies the device as a +3.3 V Channel Link receiver. These figures define the electrical, protocol, and mechanical constraints that must be matched by any replacement.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা DS90CR288MTD — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose DS90CR288MTD when the design already uses a 28-bit Channel Link architecture and requires a four-channel, 75 MHz LVDS receiver in a 56-TSSOP footprint. It is especially useful where balanced routing reduces sensitivity compared with carrying 28 single-ended signals over a board-to-board connection. The compatible DS90CR285MTD is a transmitter rather than a replacement, and its 66 MHz rating is lower than the receiver's 75 MHz operating limit, so the pair must be validated as a complete link. No confirmed drop-in receiver substitute was established; any candidate must match the full pinout, four LVDS channels, clock arrangement, control functions, supply range, and 3.3 V signal levels. For designs already committed to 56-TSSOP Channel Link routing, DS90CR288MTD offers the most direct implementation path. For new architectures with different lane counts or protocols, a newer general-purpose LVDS interface may provide more design flexibility, but it can require a PCB redesign and logic-adaptation work.

ডিজাইন নোট

Route the four LVDS input pairs as controlled-impedance, tightly coupled differential nets with continuous reference-plane support. Keep the receiver close to the cable or board-to-board connector, minimize layer transitions and stubs, and match pair geometry through the interconnect. The receiver must share an uninterrupted low-impedance return path with the transmitter to preserve differential voltage and common-mode control.

Place the power bypass capacitors close to the DS90CR288MTD supply and ground pins using the manufacturer-recommended topology. Keep the switching loop area small and connect the exposed or surrounding ground structure directly to a solid plane. Avoid placing noisy converters, clocks, or high-current return paths beside the differential inputs because even a balanced signal can lose margin when common-mode noise and impedance discontinuities combine.

Do not treat the DS90CR285MTD transmitter as a substitute receiver; the two devices have opposite signal directions and different stated operating limits of 66 MHz and 75 MHz. Likewise, do not assume that every 28-bit Channel Link package has an identical pinout. Verify data, clock, enable, supply, and ground assignments for the exact MPN and confirm that the source transmitter supports the receiver's clocking and data-strobe convention.

Validate the complete link using the intended cables, connectors, PCB stack-up, and clock source rather than relying only on a bench prototype with short wires. Probe differential signal quality at the receiver pins and check rise time, differential voltage, common-mode range, clock recovery, and data timing. The 75 MHz figure describes the receiver's operating frequency, but end-to-end margin also depends on transmitter output, interconnect loss, jitter, and downstream logic timing.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The available product listings do not state a definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for the exact MPN. These fields require confirmation from the manufacturer or an authorized production record.

ডেটা যাচাই করা হয়েছে: 2026-11-10 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

DS90CR288MTD datasheet DS90CR288MTD pinout DS90CR288MTD datasheet pdf DS90CR288MTD specifications DS90CR288MTD equivalent DS90CR288MTD replacement DS90CR288MTD cross reference DS90CR288MTD price DS90CR288MTD stock Texas Instruments DS90CR288MTD DS90CR288 56-TSSOP pinout DS90CR288MTD vs DS90CR285MTD DS90CR288MTD LVDS receiver application DS90CR288MTD 28-bit receiver schematic

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments DS90CR288MTD DS90CR288 DS90CR285MTD DS90CR285 LVDS Low Voltage Differential Signaling Channel Link 28-bit receiver four-channel receiver interface IC semiconductor 3.3 V 75 MHz rising-edge data strobe 56-TSSOP TSSOP package family surface mount differential pair signal integrity industrial imaging video processing FPGA data acquisition
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন