Texas Instruments

DS90LV019TMTCX - 3.3V/5V LVDS Transceiver | Texas Instruments

MPN: DS90LV019TMTCX ✓ সক্রিয়
3.3 V or 5 V Vdss 3.5 mA Id EIA-644-A and TIA-644-A Rds(on) 14-pin TSSOP (PW) Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

DS90LV019TMTCX সারাংশ

The Texas Instruments DS90LV019TMTCX is a 3.3 V or 5 V LVDS driver and receiver capable of 100 Mbps point-to-point signaling in a 14-pin TSSOP package. It translates single-ended TTL-compatible logic into Low Voltage Differential Signaling and converts the differential input back to TTL levels.

An LVDS transceiver is a high-speed interface device that combines a differential line driver, a differential receiver, and associated biasing or termination functions. Within the interface hierarchy, it belongs to the line-driver and receiver class, then to LVDS interface ICs, and ultimately to the broader semiconductor category. Differential signaling reduces sensitivity to common-mode noise because the receiving circuit evaluates the voltage difference between two conductors rather than the voltage referenced to ground.

The device supports both 3.3 V and 5 V operation, provides one transmit and one receive path, and uses a flow-through pin arrangement that supports short PCB routing between logic and differential pins. According to the Texas Instruments product page, the DS90LV019 is intended for high-speed, low-power point-to-point interconnects. Its operating temperature range is -40 °C to +85 °C.

The DS90LV019 uses current-mode differential signaling to keep power dissipation controlled at higher data rates. Cross-reference information reports a 3.5 mA output loop current and a 0.45 V differential output level. The receiver converts the differential LVDS input into a single-ended TTL-compatible output, allowing the same device to bridge a TTL source and an LVDS link.

Typical uses include clock distribution, point-to-point data links, telecom equipment, industrial controllers, test and measurement systems, and embedded backplane interconnects. The 14-pin TSSOP package is suitable for compact multilayer PCB designs where a conventional dual-row surface-mount footprint is preferred over larger leaded packages.

For reliable LVDS operation, place the differential pair on a controlled-impedance PCB layer, keep the two traces closely coupled, terminate the receiver as recommended by the manufacturer, and avoid routing the pair through noisy power or switching regions. Confirm the board's trace impedance and connector or cable loss before selecting a long cable or high data rate.

This page consolidates manufacturer specifications, distributor package information, verified drop-in cross-references, interface-comparison parameters, and practical PCB guidance so engineers can evaluate the DS90LV019TMTCX as a complete LVDS interface solution.

এর জন্য ড্রপ-ইন বিকল্প DS90LV019TMTCX — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

DS90LV019TMTCX/NOPB

✅ ড্রপ-ইন
📦 14-TSSOP (PW)
Same 14-pin TSSOP footprint and 3.3 V/5 V, 100 Mbps LVDS transceiver function; only the orderable suffix and marking or packing convention differ, with 0% functional parameter difference.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

DS90LV019TMTC/NOPB

✅ ড্রপ-ইন
📦 14-TSSOP (PW)
Same 14-pin TSSOP footprint, 3.3 V or 5 V supply operation, and 100 Mbps LVDS driver and receiver function; orderable suffix differs, with 0% core functional parameter difference.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

DS90LV019TMTC

✅ ড্রপ-ইন
📦 14-TSSOP (PW)
Same 14-pin TSSOP package and LVDS transceiver ratings; orderable suffix differs, with 0% functional parameter difference indicated by the cross-reference comparison.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

DS90LV019TMTCX বিশেষণ

Device Type LVDS line driver and receiver
সাপ্লাই ভোল্টেজ 3.3 V or 5 V
Maximum Data Rate 100 Mbps
Number of Transmitters 1
Number of Receivers 1
Logic Interface TTL-compatible
Differential Interface LVDS
LVDS Standards EIA-644-A and TIA-644-A
Output Loop Current 3.5 mA
Differential Output Level 0.45 V
অপারেটিং তাপমাত্রা -40 °C to +85 °C
প্যাকেজ 14-pin TSSOP (PW)
মাউন্টিং টাইপ Surface mount
Pin Arrangement Flow-through pinout
Applications High-speed, low-power point-to-point interconnects

DS90LV019TMTCX 14-pin tssop (pw) পিন কনফিগারেশন গাইড

DS90LV019TMTCX (14-pin tssop (pw) প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

DS90LV019TMTCX-এর জন্য 14-pin tssop (pw) প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি DS90LV019TMTCX.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

DS90LV019TMTCX এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Point-to-Point Clock Distribution, Industrial Control Data Link, Telecom and Network Equipment Interface, Test and Measurement Signal Link, Embedded Backplane Interconnect, Low-Power Differential Signal Conditioning.

🖥️

Point-to-Point Clock Distribution

The DS90LV019TMTCX fits a low-power differential clock link that must operate at up to 100 Mbps. Its 3.3 V or 5 V supply compatibility allows the LVDS side to coexist with either 3.3 V or 5 V TTL logic in the same system. Use the flow-through package arrangement to keep the differential traces short and route the two conductors as a coupled pair. The receiver converts the differential clock back to a single-ended output while the driver provides noise-resistant transmission over a PCB or short cable. Confirm termination, jitter budget, and output edge rate against the system clock requirement before releasing the layout.

🏭

Industrial Control Data Link

The DS90LV019TMTCX is appropriate for a compact industrial controller that must move a single-ended control or status signal across a board-to-board LVDS connection. Differential current-mode signaling reduces susceptibility to common-mode disturbance, while the 100 Mbps capability provides useful margin over slow control traffic. The 14-pin TSSOP package simplifies assembly and supports compact multilayer boards. Place the differential route away from motor-control and relay-switching nodes, implement the manufacturer-recommended receiver termination, and verify that the industrial environment does not require a wider operating temperature grade.

🌐

Telecom and Network Equipment Interface

The DS90LV019TMTCX can serve as a point-to-point interface element in telecom or network equipment where a TTL-compatible source must reach a differential LVDS link. Operation from 3.3 V or 5 V provides flexibility across line-card and control-board supply plans. The device's single driver and receiver support dedicated signaling paths without a multi-channel transceiver's pin overhead. In a high-density chassis, route the pair over a continuous plane, maintain the specified differential impedance, and keep connectors and cable assemblies short enough to preserve the usable eye at the intended data rate.

🔧

Test and Measurement Signal Link

The DS90LV019TMTCX is suitable for carrying a single-ended trigger, status, or synchronization signal between measurement instrument sections over LVDS. Differential transmission helps reduce susceptibility to coupling from adjacent analog and switching circuitry. The 100 Mbps maximum data rate accommodates many control and synchronization paths, while the small 14-pin TSSOP footprint leaves more board area for analog components. Keep the differential pair short, provide the specified receiver termination, and separate it from high-impedance analog inputs to minimize crosstalk into the measurement system.

🔌

Embedded Backplane Interconnect

The DS90LV019TMTCX can bridge a TTL-compatible processor or controller to a low-voltage differential backplane segment. Its flow-through pin arrangement supports straightforward routing between logic circuitry and a connector, while the 14-pin TSSOP package is compatible with dense board layouts. The differential interface limits common-mode pickup when the link crosses areas near switching regulators or backplane drivers. Define the backplane impedance and receiver termination consistently, minimize stub lengths, and validate signal integrity with the actual connector and layer stack-up rather than assuming ideal point-to-point conditions.

⚡

Low-Power Differential Signal Conditioning

The DS90LV019TMTCX is useful when a design must convert a single-ended TTL signal into LVDS and recover it at the far end without adopting a multi-channel, higher-power interface device. The 3.3 V and 5 V operating options permit placement near either logic family, and the current-mode driver supports controlled power dissipation at elevated data rates. Use the driver when the link length or connector environment creates ground-offset problems, then terminate the receiver as directed by the manufacturer. This arrangement improves noise immunity without changing the originating logic voltage domain.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

DS90LV019TMTCX/NOPB Identical 14-TSSOP transceiver orderable variant ব্যবহৃত হয়: Point-to-Point Clock Distribution, Telecom and Network Equipment Interface, Embedded Backplane Interconnect DS90LV019TMTC/NOPB Compatible 14-TSSOP LVDS transceiver orderable variant ব্যবহৃত হয়: Industrial Control Data Link, Low-Power Differential Signal Conditioning DS90LV019TMTC Functionally equivalent 14-TSSOP LVDS transceiver ব্যবহৃত হয়: Test and Measurement Signal Link
What is the DS90LV019TMTCX?
The DS90LV019TMTCX is a Texas Instruments single-channel LVDS transceiver that combines one driver and one receiver in a 14-pin TSSOP package. It supports 3.3 V or 5 V operation and 100 Mbps signaling. According to the Texas Instruments DS90LV019 product page, the device is intended for high-speed, low-power point-to-point interconnects and translates between TTL-compatible logic and LVDS differential signaling.
What is the maximum data rate of DS90LV019TMTCX?
The DS90LV019TMTCX supports data rates up to 100 Mbps. Cross-reference data identifies it as a 3.3 V LVDS driver and receiver with a 0.45 V differential output level and 3.5 mA output loop current. Use those figures as the basis for the interface timing budget, and confirm edge-rate and channel-loss margins against the manufacturer datasheet when designing the PCB and external termination.
Where can I download the DS90LV019TMTCX datasheet PDF?
The official DS90LV019TMTCX datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ds90lv019.pdf. The manufacturer product page is https://www.ti.com/product/DS90LV019. These documents cover the electrical characteristics, recommended application conditions, pin configuration, and flow-through package layout. Request the current lead time through the Request a Quote form on this page.
Where can I find the DS90LV019TMTCX pinout?
The DS90LV019TMTCX pin configuration is documented in the Texas Instruments DS90LV019 datasheet and in the 14-pin TSSOP package drawing identified as PW. The device uses a flow-through arrangement that helps minimize board-routing complexity. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks and confirm exposed-pad or thermal-pad requirements for the specific assembly before layout release.
Can DS90LV019TMTCX operate from both 3.3 V and 5 V?
Yes, the DS90LV019TMTCX operates from either a 3.3 V or a 5 V supply. This dual-rail compatibility allows the same interface device to bridge TTL logic levels in systems built around different supply voltages. Texas Instruments identifies the part as a 3.3 V or 5 V LVDS driver and receiver, with an operating temperature range of -40 °C to +85 °C.
What is the difference between DS90LV019TMTCX and DS90LV019TMTCX/NOPB?
The DS90LV019TMTCX and DS90LV019TMTCX/NOPB both provide a 14-TSSOP LVDS driver and receiver, and comparison data identifies them as completely interchangeable because their terminals, package, and principal performance characteristics are consistent. The distinguishing element is the ordering suffix and associated packaging or marking convention. Check the full orderable part number and packing code before substituting either version.
What is the best drop-in replacement for DS90LV019TMTCX?
The best documented drop-in replacement is the Texas Instruments DS90LV019TMTCX/NOPB, which retains the 14-pin TSSOP footprint and matching LVDS transceiver function. The Texas Instruments DS90LV019TMTC/NOPB is also listed as a compatible 14-TSSOP alternative. Both replacements require confirmation of the exact suffix, ordering code, operating temperature range, and production requirements before schematic release.
Is DS90LV019TMTCX the same as DS90LV019TMTC/NOPB?
The DS90LV019TMTCX and DS90LV019TMTC/NOPB are electrically and mechanically compatible in the same 14-pin TSSOP format. Cross-reference information describes the package, terminals, and principal electrical characteristics as consistent, allowing direct substitution without PCB modification. Confirm the exact orderable suffix and packing requirements because the marked orderable codes are not identical.
When should I choose DS90LV019TMTCX over a generic LVDS transceiver?
Choose the DS90LV019TMTCX when a design needs a specific 14-pin TSSOP LVDS interface supporting both 3.3 V and 5 V supplies at up to 100 Mbps. Its flow-through pin arrangement is useful when the logic and differential connections must follow the PCB routing direction. A generic transceiver may be appropriate when different data rates, fail-safe behavior, or additional channels are required.
Is DS90LV019TMTCX suitable for a 100 Mbps clock link?
The DS90LV019TMTCX is suitable for a 100 Mbps point-to-point clock or data link when its 100 Mbps rating is the required maximum operating rate. Install the receiver termination recommended by the manufacturer, route the differential pair with controlled impedance, and verify connector, cable, and PCB loss. Margin should be checked for the specific edge rate and jitter tolerance of the transmitted clock.
How should the DS90LV019TMTCX LVDS pair be routed on a PCB?
Route the DS90LV019TMTCX differential pair as a tightly coupled pair on a continuous reference plane with controlled differential impedance. Keep the driver and receiver connections short, avoid vias where practical, and keep the pair away from switching nodes and high-current return paths. Use the manufacturer pin-description table to identify driver, receiver, enable, ground, and supply assignments before final routing.
What does the DS90LV019TMTCX need for receiver termination?
The DS90LV019TMTCX receiver requires the LVDS termination arrangement recommended in the Texas Instruments datasheet, normally a differential termination across the receiver pair. The exact resistor value and any optional fail-safe arrangement should be taken from the manufacturer application guidance. Keep the termination close to the receiver pins and verify it against the connector, cable, and PCB impedance.
Where can I buy DS90LV019TMTCX online?
Use the Request a Quote form on this page to request DS90LV019TMTCX availability, current lead time, and a formal quotation for the exact suffix and quantity. The part is a cataloged 14-pin TSSOP device, but production status and orderable configuration should be confirmed when the quotation is issued. Request the applicable packing option along with the quantity forecast to avoid package mismatches.
How much does DS90LV019TMTCX cost?
Current commercial pricing for DS90LV019TMTCX depends on order quantity, suffix, packing option, and market conditions. Submit the required quantity and target package through the Request a Quote form on this page for a current quotation. Include the DS90LV019TMTCX orderable code in the request so the quotation matches the exact 14-pin TSSOP configuration rather than a related orderable variant.
What is the lead time for DS90LV019TMTCX?
The current lead time for DS90LV019TMTCX should be requested through the Request a Quote form on this page. Provide the annual usage, forecast horizon, and required quantity-break schedule so the supplier can confirm material availability and production planning. Ask for the 14-pin TSSOP packing option and the exact orderable suffix with the quotation.
Is DS90LV019TMTCX currently active?
The Texas Instruments product page lists the DS90LV019 as an available catalog product with ordering and quality information. Request a current quotation to confirm the lifecycle status for the exact DS90LV019TMTCX orderable code and any manufacturing notices affecting the selected package. Lifecycle confirmation at quotation time helps avoid long-term supply risk in new designs.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা DS90LV019TMTCX — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the DS90LV019TMTCX when the design needs a single-channel LVDS transceiver in a 14-pin TSSOP package, with support for both 3.3 V and 5 V supplies and operation up to 100 Mbps. It is particularly suitable for short point-to-point clock, control, or data links where differential signaling improves noise immunity and the flow-through pin arrangement simplifies routing. Use DS90LV019TMTCX/NOPB when that orderable suffix is specified by the BOM or when its marking and packing convention is preferred; the functional and package differences are negligible. DS90LV019TMTC/NOPB and DS90LV019TMTC are also documented as compatible 14-TSSOP alternatives, but their orderable codes should be checked against procurement and production requirements. For designs requiring multiple channels, data rates above 100 Mbps, a wider temperature range, or automotive qualification, select a transceiver explicitly specified for those requirements rather than assuming the DS90LV019 family covers them.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য DS90LV019TMTCX/NOPB DS90LV019TMTC/NOPB DS90LV019TMTC
Package 14-TSSOP (PW) 14-TSSOP (PW) 14-TSSOP (PW) 14-TSSOP (PW)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Supply Voltage 3.3 V or 5 V 3.3 V or 5 V 3.3 V or 5 V 3.3 V or 5 V
Maximum Data Rate 100 Mbps 100 Mbps 100 Mbps 100 Mbps
Number of Transmitters 1 1 1 1
Number of Receivers 1 1 1 1

মূল পার্থক্যসমূহ

  • Documented pin-compatible replacement coverage within the DS90LV019 family (বনামDS90LV019TMTCX/NOPB)
  • Flow-through TSSOP organization supports practical point-to-point routing (বনামDS90LV019TMTC/NOPB)
  • Dual 3.3 V and 5 V supply compatibility expands board-level integration options (বনামDS90LV019TMTC)

ডিজাইন নোট

Route the DS90LV019TMTCX differential pair as a tightly coupled, length-matched pair on a continuous reference plane. Define the target differential impedance from the actual PCB stack-up and preserve that geometry through connectors and vias. The flow-through package helps minimize routing length, but the driver and receiver pins still require the arrangement shown in the manufacturer pin-description table.

Apply the receiver termination specified by the manufacturer and place it close to the receiver inputs. Confirm the resistance and any fail-safe arrangement from the Texas Instruments datasheet rather than copying a termination from a different LVDS device. Keep the pair away from switching-regulator inductors, relay contacts, and high-current return paths, and validate the complete connector and cable path with an eye or compliance measurement.

Do not substitute the 3.3 V-only descriptions found in some third-party listings for the full manufacturer specification, which identifies the DS90LV019 as a 3.3 V or 5 V device. Likewise, verify the 14-pin TSSOP package rather than the SOT-23 package listed by an incorrect aggregation result. Before substitution, confirm the complete orderable suffix, supply range, data rate, temperature range, and receiver termination arrangement.

Provide a quiet return path beneath the differential interface and avoid splitting the reference plane beneath the pair. If the signal must cross a plane boundary, add a stitching capacitor near the interface and re-evaluate the return current path. Avoid placing test points on only one conductor unless the fixture has been designed for a properly terminated differential connection.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The manufacturer product and distributor listings do not explicitly state each environmental-compliance field. AEC-Q100 is marked not applicable because this is a general-purpose interface IC rather than an automotive-qualified device.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ds90lv019tmtcx nopb DS90LV019TMTCX datasheet DS90LV019TMTCX datasheet pdf DS90LV019TMTCX pinout DS90LV019TMTCX replacement DS90LV019TMTCX equivalent DS90LV019TMTCX drop-in replacement DS90LV019TMTCX vs DS90LV019TMTCX/NOPB Texas Instruments DS90LV019TMTCX DS90LV019 100Mbps LVDS transceiver DS90LV019 14-TSSOP footprint DS90LV019 LVDS point-to-point link DS90LV019TMTCX price DS90LV019TMTCX stock DS90LV019TMTCX 3.3V 5V

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments DS90LV019TMTCX DS90LV019TMTCX/NOPB DS90LV019TMTC/NOPB DS90LV019TMTC LVDS Low Voltage Differential Signaling LVDS transceiver line driver differential receiver TTL-compatible logic EIA-644-A TIA-644-A current-mode driver flow-through pinout 14-TSSOP PW package surface mount point-to-point interconnect controlled-impedance routing receiver termination 100 Mbps data rate 3.3 V supply 5 V supply industrial control link
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন