EP3C16E144I7 - 15,408 L-Cell Cyclone III FPGA | Intel
MPN: EP3C16E144I7 ✓ সক্রিয়EP3C16E144I7 সারাংশ
An FPGA is a reconfigurable digital semiconductor. Its lookup logic, registers, programmable interconnect, and memory resources can be configured after manufacture to implement a defined digital circuit. Within the product hierarchy, the EP3C16E144I7 is a Cyclone III FPGA, a member of the field-programmable gate array and programmable-logic semiconductor family. It is selected when designers need hardware-level parallelism and updateable logic rather than the fixed peripheral set and sequential execution model of a microcontroller.
The verified device listing identifies 15,408 logic cells, 84 I/O, and a 144-LQFP exposed-pad package. Its industrial temperature grade supports equipment intended for factory, industrial-control, communications, and embedded-processing environments. The exposed thermal pad provides a direct thermal path from the device to the PCB, but designers still need an appropriate land pattern, vias, and copper area to dissipate junction heat effectively.
The 144-pin package is described in the verified data as a 20 x 20 mm square LFQFP with 0.40 mm pitch and 144 terminals. Fine pitch requires careful PCB design, particularly for via-in-pad avoidance, solder-paste control, assembly cleaning, and inspection. The exposed pad should be connected to the intended ground plane according to the manufacturer's package guidance and should not be treated as an interchangeable thermal-only feature without checking the land pattern.
Typical uses include industrial automation, communications infrastructure, embedded control, video and image processing, test equipment, and general-purpose digital prototyping. Because the logic fabric is programmable, the same FPGA family can support multiple interface standards and parallel data paths. The 84 available I/O are particularly relevant for designs requiring parallel sensors, data buses, control signals, status indicators, or high-speed external interfaces.
Before layout or sourcing, engineers should download the Cyclone III device handbook and EP3C16 device documentation, then verify the exact pin names, bank voltages, power requirements, configuration method, and exposed-pad connection against the intended design. The supplied search evidence confirms the core identity and package but does not include a complete pin table or electrical limits, so those details must not be inferred from the 144-pin count alone.
This product record combines verified distributor identity, package, logic-cell, and I/O information with same-package migration guidance, selection criteria, and practical design considerations. It distinguishes confirmed attributes from unavailable specifications, helping engineers identify candidates without confusing a package-compatible option with a fully verified functional replacement.
এর জন্য ড্রপ-ইন বিকল্প EP3C16E144I7 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible EP3C16E144I7 (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Process Technology, Operating Temperature, RoHS Status, Total Memory Bits.
EP3C16E144C8N
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →EP3C16E144A7N
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
EP3C10E144I7N
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →EP3C16E144I7N
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →EP3C16Q144I7N
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
EP3C16E144I7 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | Field Programmable Gate Array (FPGA) |
| FPGA Family | Cyclone III |
| Logic Cells | 15,408 |
| I/O Count | 84 |
| প্যাকেজ | 144-LQFP Exposed Pad |
| Package Code | LFQFP |
| Package Body Size | 20 x 20 mm |
| Package Pitch | 0.40 mm |
| পিন সংখ্যা | 144 |
| Terminal Type | Gull wing |
| Package Shape | Square |
| Temperature Grade | Industrial |
| মাউন্টিং টাইপ | Surface Mount |
EP3C16E144I7 square পিন কনফিগারেশন গাইড
EP3C16E144I7 (square প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি EP3C16E144I7.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
EP3C16E144I7 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Automation and Control, Communications and Network Interface, Embedded Control Platform, Video and Image Processing, Test and Measurement Equipment, Programmable Logic and Prototyping.
Industrial Automation and Control
The Intel EP3C16E144I7 fits industrial control systems that combine machine I/O, sequencing, interlocks, and communications in one programmable device. Its verified 84 I/O provide external connections for sensors, actuators, encoders, status indicators, and field-bus transceivers, while 15,408 logic cells can implement control logic, state machines, and protocol handling. The industrial temperature classification supports factory equipment, subject to confirmation of the full operating limits. Designers should assign compatible I/O standards to the correct power banks and verify timing through Quartus. The exposed pad requires a thermal-via array and uninterrupted copper connection to the recommended ground plane.
সুপারিশকৃত
Communications and Network Interface
The EP3C16E144I7 is suitable for configurable communications front ends that must combine framing, packet filtering, buffering, and control logic. Its 15,408 logic cells provide parallel hardware implementation, while the verified 84 I/O can connect transceivers, clock signals, resets, and status indicators without relying entirely on a sequential processor. A design could implement a custom protocol bridge or low-rate telemetry engine around Ethernet, serial, or industrial-network PHYs. Engineers must confirm supported I/O standards, bank voltages, and timing from the official documentation before assigning external interfaces, and should use the same speed-grade migration tables used for any alternative FPGA.
সুপারিশকৃত
Embedded Control Platform
The Intel EP3C16E144I7 can serve as a dedicated embedded-logic controller when deterministic parallel operation and reconfigurable hardware are more valuable than a microcontroller’s software ecosystem. The 15,408 logic cells can implement multiple state machines, counters, timing units, arithmetic blocks, and hardware interlocks, while the 84 I/O support sensors and actuators. A practical architecture may pair the FPGA with external flash for configuration and a microcontroller for supervisory functions. Before schematic release, verify configuration pins, supported clock sources, core voltage, I/O bank restrictions, and exposed-pad grounding against the Cyclone III handbook and the selected board power plan.
সুপারিশকৃত
Video and Image Processing
The EP3C16E144I7 is applicable to parallel pixel pipelines, timing generation, color processing, and interface bridging where programmable logic offers deterministic throughput. Its verified 84 I/O are useful for low-resolution or segmented video interfaces, and the 15,408 logic cells can implement parallel filters, line buffers, counters, and synchronization logic. The device is better suited to modest parallel pipelines than resource-intensive high-definition codecs unless an external processor handles those functions. Engineers should establish exact timing budgets, I/O voltage compatibility, and clock-domain constraints in Quartus, while ensuring the exposed pad and PCB vias are designed for worst-case activity and temperature.
সুপারিশকৃত
Test and Measurement Equipment
The EP3C16E144I7 can implement programmable timing, pattern generation, acquisition control, and instrument-interface logic in industrial test and measurement products. Its parallel architecture supports deterministic sequences across the 84 I/O, while 15,408 logic cells allow multiple counters, trigger paths, and data-formatting blocks to coexist. This is useful where precise timing must be maintained without the latency variability of general-purpose software. Designers should verify clock quality, I/O standards, and timing closure for the required measurement bandwidth. If replacing the target with an E144 migration option, compare timing grades explicitly because the package match alone does not establish equivalent performance.
সুপারিশকৃত
Programmable Logic and Prototyping
The Intel EP3C16E144I7 is appropriate for FPGA prototyping, custom accelerator development, and education platforms where 15,408 logic cells and 84 I/O provide substantial design capacity in a 144-LQFP package. Engineers can implement parallel datapaths, instruction decoding, memory interfaces, and peripheral bridges while keeping the assembly footprint compact. The fine 0.40 mm package pitch requires a capable PCB process and careful assembly process control, especially when using the exposed-pad option. Project teams should also confirm configuration storage, clock connectivity, supported I/O standards, and the exact pin map before releasing a new PCB because the available search data does not enumerate the 144 pins.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা EP3C16E144I7 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | EP3C16E144C8N | EP3C16E144A7N | EP3C10E144I7N | EP3C16E144I7N | EP3C16Q144I7N |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 144-LQFP Exposed Pad | 144-LQFP Exposed Pad | 144-LQFP Exposed Pad | 144-LQFP Exposed Pad | 144-LQFP Exposed Pad | 144-LQFP Exposed Pad |
| FPGA Family | Cyclone III | Cyclone III | Cyclone III | Cyclone III | Cyclone III | Cyclone III |
| Ordering Suffix | I7 | C8N | A7N | I7N | I7N | I7N |
মূল পার্থক্যসমূহ
- Higher logic density than the EP3C10 migration option (বনামEP3C10E144I7N)
- Direct industrial-temperature ordering (বনামEP3C16E144C8N)
- Same-package migration family without package conversion (বনামEP3C16E144A7N)
- Broader density margin than the EP3C10 candidate (বনামEP3C10E144I7N)
ডিজাইন নোট
Treat the exposed pad as both a package feature and a required PCB thermal path. Follow the official E144 land-pattern drawing for pad dimensions, antipads, and via arrangement. Connect the pad to the recommended ground plane with multiple thermal vias rather than relying on a single via. Because the supplied sources do not provide junction-temperature limits or thermal resistance, final thermal qualification must use the manufacturer data and worst-case ambient temperature, core activity, and supply voltage.
The 0.40 mm pitch LQFP requires a PCB process and assembly process capable of resolving 144 fine-pitch leads plus the exposed pad. Verify pad-to-mask and paste-to-pad ratios with the assembly house, control solder bridging during reflow, and plan adequate inspection. Do not substitute a generic 144-LQFP footprint: the verified target is specifically the E144 exposed-pad variant, so exposed-pad geometry, lead dimensions, and via placement must be checked against the official package drawing.
Do not treat a matching package name as proof that every ordering code is a drop-in replacement. EP3C16E144C8N and EP3C16E144A7N appear in verified comparisons, but their speed or grade ordering differs from I7. EP3C10E144I7N has a different density, while the EP3C16Q144I7N candidate needs exact resource and pin verification. Before substitution, compare the Cyclone III migration table, timing grade, temperature grade, power behavior, configuration scheme, pin map, and Quartus fit.
Design the supply rails only after assigning every external signal to a compatible I/O bank and checking the official voltage limits for core, auxiliary, and I/O supplies. Decoupling should follow the manufacturer’s recommended network, with short, low-impedance connections and return paths referenced to the same ground plane. The supplied excerpts do not identify rail voltages or permitted combinations, so values must not be inferred from the package or logic-cell count.
Route clocks, high-speed interfaces, and configuration signals with controlled return paths, while keeping the exposed-pad thermal-via array clear of unintended voids. Match external interface standards to the correct I/O bank and keep sensitive inputs away from noisy switching nodes where practical. Because no complete verified pinout or bank map is present in the supplied data, the final schematic and layout must be cross-checked against the official Cyclone III E144 pin and package documents.
কমপ্লায়েন্স তথ্য
The supplied excerpts do not state target-specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification status. AEC-Q100 is not applicable because the device is an industrial-grade FPGA rather than an automotive-qualified component in the supplied data.
