Renesas Electronics

ICS180M-51 - 28MHz Low EMI Clock Generator | Renesas

MPN: ICS180M-51 ✓ সক্রিয়
8-pin SOIC Package 28 MHz Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ICS180M-51 সারাংশ

The Renesas Electronics ICS180M-51 is a low-EMI single-output spread-spectrum clock generator that operates from a clock or crystal input. It combines IDT proprietary analog and digital phase-locked-loop technology, supports a maximum frequency of 28 MHz, and provides a CMOS output with a 1:1 input-to-output ratio. The device is offered in an 8-pin SOIC package.

A clock generator is an integrated circuit that produces a stable timing reference for digital systems. It may accept an existing reference clock or a crystal and use a phase-locked loop, or PLL, to create a related output frequency. Clock generators are used to support processor timing, data conversion, communications, storage, and other digital subsystems. The ICS180M-51 belongs to the clock generator and timing-IC hierarchy rather than the general-purpose logic IC category.

The central feature of the ICS180M-51 is its low-EMI output. According to the ICS180-51 datasheet, the device offers center-spread selections of ±0.625% and ±1.875%. These selections allow a clock's spectral energy to be distributed across a wider frequency range, which can reduce the peak magnitude of narrowband emissions when used as an EMI mitigation technique. The single output stage uses CMOS signaling and has a listed 1:1 input-to-output ratio.

The ICS180-51 combines analog and digital PLL functions to derive its output from a clock or crystal input. This architecture allows a single device to operate as a low-EMI clock generator rather than requiring a separate fixed-frequency oscillator arrangement. The Renesas datasheet also identifies related MK1714-01 and MK1714-02 devices as references for a wider selection of input frequencies and multipliers when a design requires more flexible frequency translation than the ICS180-51 provides.

Typical uses include EMI-sensitive digital equipment, communications equipment, and systems requiring a low-EMI clock derived from an existing reference. The device is also suitable where spread-spectrum clocking is used to reduce discrete spectral components. It can serve as a timing reference for processors, interface circuits, converters, and other clocked digital logic where a CMOS output at up to 28 MHz is required.

When designing around the ICS180M-51, first confirm that the source frequency, selected spread mode, and required output frequency are supported by the device configuration. Place the clock input and output traces for controlled impedance and maintain short return paths to the device ground pins. Verify conducted and radiated emissions at the finished-product level because spread-spectrum timing alone does not establish regulatory compliance.

This page consolidates the device type, operating limits, spread-spectrum selections, package information, sourcing guidance, and design cautions into one engineering reference. It also provides practical application analysis, alternative-part qualification guidance, and a structured comparison framework for evaluating the ICS180M-51 against other low-EMI clock-generator options.

এর জন্য ড্রপ-ইন বিকল্প ICS180M-51 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

ICS180M-51LF

✅ ড্রপ-ইন
📦 8-SOIC
Documented complete replacement with 0% difference in principal performance parameters, functions, terminals, and package

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ICS180M-51T

✅ ড্রপ-ইন
📦 8-SOIC
Documented complete replacement with 0% difference in principal performance parameters, functions, terminals, and package

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ICS180M-51 বিশেষণ

Product Type Spread spectrum clock generator
আউটপুট কনফিগারেশন Single output
Maximum Frequency 28 MHz
Input Sources Clock or crystal
আউটপুট টাইপ CMOS
PLL Yes
Number of Circuits 1
Input-to-Output Ratio 1:1
Center Spread Selection 1 ±0.625%
Center Spread Selection 2 ±1.875%
EMI Characteristic Low EMI output
PLL Architecture Proprietary mix of analog and digital PLL technology
প্যাকেজ 8-pin SOIC
মাউন্টিং টাইপ Surface mount
Datasheet Publication Date 2012-03-28

ICS180M-51 8-pin soic পিন কনফিগারেশন গাইড

ICS180M-51 (8-pin soic প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

ICS180M-51-এর জন্য 8-pin soic প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ICS180M-51.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ICS180M-51 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: EMI-Sensitive Digital Logic, Communications Equipment Clocking, Processor Interface Timing, Data Acquisition and Conversion Systems, Network and Storage Controller Clocks, Industrial Control Module Timing.

🔧

EMI-Sensitive Digital Logic

The ICS180M-51 fits digital systems that need a low-EMI clock with a selectable spread spectrum. Its center-spread options of ±0.625% and ±1.875% distribute clock energy over a wider frequency range, which can lower the peak magnitude seen at a narrow measurement band. The device accepts a clock or crystal source, provides one CMOS output, and uses a 1:1 input-to-output ratio. Place the generator close to the receiving logic, keep clock traces short, and verify both radiated and conducted emissions in the final assembly.

🌐

Communications Equipment Clocking

Communications equipment can use the ICS180M-51 to create a spread CMOS clock for timing sections that are sensitive to narrowband emissions. With clock or crystal input, a maximum listed frequency of 28 MHz, and selectable center spreading, the device suits moderate-speed digital rails. The 1:1 ratio simplifies clock-tree distribution, but board engineers should test the complete transmitter and receiver chain because data-line activity and power-converter switching can create additional emissions that clock spreading does not address.

🖥️

Processor Interface Timing

The ICS180M-51 can provide a referenced CMOS clock for processors and interface logic that operate within the device's 28 MHz maximum frequency. Its clock or crystal input and 1:1 input-to-output ratio allow it to sit near the source or the load depending on board architecture. The selectable ±0.625% or ±1.875% spread may help reduce discrete clock harmonics. Confirm the receiving device's jitter, input-voltage, and clock-accuracy requirements before using the spread output as a precision reference.

📺

Data Acquisition and Conversion Systems

Data converters and acquisition systems can use the ICS180M-51 as a low-EMI digital clock source when their sampling logic operates at a compatible frequency. The device supplies one CMOS output with a 1:1 ratio and offers ±0.625% or ±1.875% center spreading, helping reduce narrowband clock energy. Because converter accuracy may depend on clock quality, use spread-spectrum mode only when the acquisition system tolerates the resulting modulation, and verify timing margin and conversion performance with the complete signal chain.

🖥️

Network and Storage Controller Clocks

Network-interface and storage-controller boards can benefit from a spread-spectrum clock when reducing discrete emissions is a design priority. The ICS180M-51 accepts a clock or crystal reference, delivers a CMOS output, and supports a maximum listed frequency of 28 MHz with a 1:1 ratio. Its low-EMI architecture is intended for this class of timing need. Route the output into the controller's clock input with a short, controlled-impedance trace, and confirm that the controller tolerates frequency modulation during its operating modes.

🏭

Industrial Control Module Timing

The ICS180M-51 is suitable for industrial control modules that need a compact clock source and selective spectrum spreading. Its 8-pin SOIC package supports surface-mount assembly, while the ±0.625% and ±1.875% center-spread settings give designers two EMI-tuning choices. A 1:1 input-to-output ratio keeps the clock path straightforward when the module already has a suitable reference. Validate operation across the full industrial temperature range and test conducted emissions at the product's power interfaces before release.

What is the ICS180M-51 clock generator used for?
The ICS180M-51 is a low-EMI, single-output spread-spectrum clock generator used to derive a CMOS clock from an external clock or crystal input. According to the ICS180-51 datasheet, it uses IDT proprietary analog and digital PLL technology and supports a maximum frequency of 28 MHz. It is suitable for digital systems that want spread-spectrum timing to reduce the peak level of narrowband clock emissions.
What are the key specifications of ICS180M-51 that engineers should know?
The ICS180M-51 combines clock or crystal input, a CMOS output, one internal clock circuit, a 1:1 input-to-output ratio, and a maximum listed frequency of 28 MHz. Its primary EMI-control feature is center-spread operation, with selections of ±0.625% and ±1.875%. The device is associated with the 180-51 low-EMI clock-generator family and is offered in an 8-pin SOIC package.
Where can I download the ICS180M-51 datasheet PDF?
The authoritative ICS180-51 datasheet is available through the Renesas document page at https://www.renesas.com/en/document/dst/180-51-datasheet. That document describes the low-EMI output, analog and digital PLL implementation, clock or crystal input, CMOS output, and center-spread selections of ±0.625% and ±1.875%. Use the manufacturer document for pin assignments, electrical limits, and configuration details.
What spread-spectrum options does ICS180M-51 support?
The ICS180M-51 supports center-spread selections of ±0.625% and ±1.875%. According to the Renesas ICS180-51 datasheet, these settings spread the clock spectrum around its nominal frequency instead of concentrating more energy at a single frequency. This can reduce peak narrowband emissions, but final EMI performance still depends on clock topology, board layout, shielding, filtering, and the enclosure.
What clock inputs can ICS180M-51 accept?
The ICS180M-51 accepts either a clock or a crystal input and produces one CMOS output. The listed input-to-output ratio is 1:1, and the maximum listed operating frequency is 28 MHz. The device therefore fits designs in which the source reference is compatible with its supported input arrangement and the resulting output can be used directly as a CMOS clock.
Does ICS180M-51 reduce EMI compared with a fixed-frequency clock?
Yes, the ICS180M-51 is designed to generate a low-EMI output by using selectable center-spectrum spreading. The available selections are ±0.625% and ±1.875%, according to the ICS180-51 datasheet. Spreading energy across a range of frequencies can lower the magnitude at any one narrowband frequency compared with a concentrated clock spectrum, although it does not replace good PCB layout or product-level filtering.
Is ICS180M-51 a PLL clock generator?
The ICS180M-51 uses a proprietary combination of analog and digital phase-locked-loop technology. Its listed functions include PLL operation, clock or crystal input, and a single CMOS output with a 1:1 input-to-output ratio. This makes it a dedicated timing IC rather than a general-purpose logic gate or a conventional fixed-frequency oscillator.
Where can I buy ICS180M-51 online?
Use the Request a Quote form on this page to request ICS180M-51 pricing, current availability, and order quantities. The device is listed for ordering under the manufacturer part number ICS180M-51, with the orderable suffix also appearing as ICS180M-51-ND and as the tape-and-reel variant ICS180M-51T. The sourcing team can confirm the exact packaging and delivery schedule.
What is the price of ICS180M-51?
Current ICS180M-51 pricing depends on order quantity, package suffix, and current component availability. Submit a request through the Request a Quote form on this page for a quantity-specific quotation. Because market pricing can change, use the structured pricing panel and quote response for the current commercial terms rather than relying on a static price listing.
What is the lead time for ICS180M-51?
Request the current ICS180M-51 lead time through the Request a Quote form on this page. Lead time can vary with the selected orderable suffix, quantity, and manufacturer inventory. Include your required delivery date, annual usage, and whether you need tube, tray, or tape-and-reel logistics so the sourcing team can confirm a realistic schedule.
Is ICS180M-51 in stock?
Use the Request a Quote form on this page to check current ICS180M-51 stock and allocation status. Availability should be confirmed for the exact ordering suffix because the base device, the -ND orderable designation, and the -T tape-and-reel version can have different logistics. The manufacturer part number is ICS180M-51, and Renesas markets the device as the ICS180-51 low-EMI clock generator.
What is the best drop-in replacement for ICS180M-51?
A valid drop-in replacement must match the 8-pin SOIC footprint, pin functions, clock or crystal input arrangement, CMOS output, 28 MHz frequency capability, and required spread-spectrum setting. No confirmed pin-compatible substitute is identified in the available cross-reference results for this device. Use the Request a Quote form for sourcing help, and require the manufacturer to verify pinout and electrical compatibility before approving any substitute.
Can another low-EMI clock generator replace ICS180M-51?
A substitute can be considered only after checking package, pinout, input source, output logic level, frequency range, spread-spectrum configuration, and PLL behavior. The ICS180M-51 uses an 8-pin SOIC package with a 1:1 input-to-output ratio, clock or crystal input, and selectable ±0.625% or ±1.875% center spread. A functional clock-generator match does not by itself prove that the device is a drop-in replacement.
When should I choose ICS180M-51 instead of a fixed-frequency oscillator?
Choose the ICS180M-51 when the design needs a clock derived from an existing clock or crystal and benefits from selectable spread-spectrum modulation. Its ±0.625% and ±1.875% center-spread options can broaden the clock spectrum for EMI reduction. A fixed-frequency oscillator may be simpler when the source frequency is known and spectrum spreading is unnecessary, but it does not provide the same input flexibility.
Is ICS180M-51 suitable for EMI-sensitive communications equipment?
The ICS180M-51 is suitable for timing sections of EMI-sensitive communications equipment when the source and output requirements align with its clock or crystal input and 28 MHz maximum frequency. Its low-EMI output and selectable center spreading help reduce concentrated spectral energy. Board-level validation remains essential because connector cables, power supplies, enclosures, and switching circuits can dominate final emissions.
How should ICS180M-51 be used in a low-EMI design?
Use the ICS180M-51 as a low-EMI clock source with the spread option that best matches the target spectrum. Keep the source, device, and receiving logic on a controlled-impedance clock path, minimize stub branches, and provide a clean return path to the device ground. Verify radiated and conducted emissions in the assembled product because clock spreading is only one element of an effective EMI-control strategy.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ICS180M-51 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the ICS180M-51 when the design requires a dedicated low-EMI clock derived from a clock or crystal source and benefits from selectable spectrum spreading. The ±0.625% mode offers the smaller frequency deviation, while ±1.875% provides a broader spread for EMI tuning. Its 28 MHz maximum frequency, 1:1 ratio, and CMOS output make it appropriate for moderate-speed digital timing. Choose a fixed-frequency oscillator when the reference is already known, spread-spectrum operation is unnecessary, or the absolute lowest cost and simplest implementation is the priority. Choose a different clock generator when the required frequency, multiplication ratio, supply voltage, package, or spread mode falls outside the ICS180-51 specifications. Because no confirmed pin-compatible alternatives were identified, any substitution should receive formal review of pinout, electrical limits, PLL behavior, and system timing before use.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য
Package 8-pin SOIC
Brand Renesas Electronics
Product Type Low-EMI spread-spectrum clock generator
Maximum Frequency 28 MHz
Input Sources Clock or crystal
Output Type CMOS
Number of Circuits 1
Input-to-Output Ratio 1:1
Center Spread Selections ±0.625% and ±1.875%
PLL Architecture Proprietary mix of analog and digital PLL technology

মূল পার্থক্যসমূহ

  • Selectable center-spectrum spreading (বনামFixed-frequency clock source)
  • Flexible reference input (বনামCrystal-only clock oscillator)
  • Dedicated low-EMI PLL implementation (বনামGeneric divider-based clock circuit)

ডিজাইন নোট

Route the source and output clock as a controlled-impedance path and keep it as short as practical. Avoid unterminated stubs, excessive vias, and splits to unrelated loads, because these structures can create reflections and additional harmonics. Place the ICS180M-51 close to the circuit that is most sensitive to clock noise when the source-to-load distance would otherwise be long.

Select the center-spread range by measurement rather than by assumption: the ICS180M-51 provides ±0.625% and ±1.875% options. Measure radiated and conducted emissions with the spread setting disabled and enabled to identify the improvement and check that downstream logic tolerates the modulation. Spread-spectrum timing reduces concentrated spectral energy but does not correct unrelated switching or connector noise.

Confirm the receiver's clock-accuracy and jitter requirements before using a spread-spectrum output for a precision sampling or conversion path. The ±1.875% mode creates more frequency deviation than the ±0.625% mode and may leave less timing margin at the receiver. Validate with the complete source, trace, loading, and receiving-device configuration rather than relying only on nominal clock frequency.

Do not assume that any 8-pin spread-spectrum clock generator is interchangeable with the ICS180M-51. Check the actual pin mapping, supply requirements, crystal versus clock input arrangement, output enable behavior, output ratio, spread configuration, and frequency limits in the manufacturer datasheet. A candidate device must also preserve the 8-pin SOIC footprint and operate within the 28 MHz maximum frequency.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No explicit environmental or automotive compliance declarations were identified for ICS180M-51. Confirm the current compliance status and material declarations with Renesas for the exact ordering suffix and shipment configuration.

ডেটা যাচাই করা হয়েছে: 2026-11-11 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ICS180M-51 datasheet ICS180M-51 specifications ICS180M-51 pinout ICS180M-51 datasheet pdf Renesas ICS180M-51 ICS180M-51 28MHz clock generator ICS180M-51 spread spectrum clock ICS180M-51 8-SOIC ICS180M-51 low EMI clock ICS180M-51 equivalent ICS180M-51 replacement ICS180M-51 cross reference ICS180M-51 buy ICS180M-51 price ICS180M-51 lead time

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Renesas Electronics Integrated Device Technology ICS180M-51 ICS180-51 ICS180M-51T ICS180M-51-ND MK1714-01 MK1714-02 spread-spectrum clock generator clock generator phase-locked loop PLL analog PLL digital PLL CMOS output center spectrum spreading low EMI clock clock-to-crystal input 1:1 input-to-output ratio 28 MHz clock 8-pin SOIC surface-mount package EMI reduction electronics timing IC
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন