ICS551MIT - 1:4 Clock Fanout Buffer, 160 MHz | Renesas
MPN: ICS551MIT ✓ সক্রিয়ICS551MIT সারাংশ
A clock fanout buffer is a clock-and-timing integrated circuit that distributes one input clock to multiple output branches. It belongs to the hierarchy of clock buffer, clock distribution device, clock and timing IC, and semiconductor. By recreating the input signal at four outputs, the ICS551MIT can reduce the loading on a clock source while supporting multiple downstream clock domains.
The principal features of the ICS551MIT are its 1:4 fanout configuration, 160 MHz maximum frequency, CMOS input and output interfaces, and single-supply operation from 3 V to 5.5 V. The part is identified as a low-cost member of the IDT ClockBlocks family and is positioned for compact, cost-sensitive designs that require more than one clock output without the footprint of a larger multi-output device.
Its architecture separates the single clock input from four buffered CMOS outputs. This arrangement allows one upstream oscillator or controller to feed several clock-enabled circuits while preserving a consistent clock source throughout the subsystem. The manufacturer documentation identifies the device as a small, high-speed clock buffer, although detailed propagation-delay, skew, rise-time, and fall-time limits must be checked in the datasheet before relying on a particular timing budget.
Typical uses include network-interface clock distribution, communications equipment, test and measurement systems, and general digital subsystems requiring a one-input, four-output clock arrangement. The 8-SOIC footprint can also simplify transitions from larger clock-buffer packages when a design requires four outputs but does not need a dual-channel monolithic implementation.
PCB implementation should preserve short clock traces, provide a continuous ground reference, and route outputs away from high-current switching paths. Because clock edges can pick up coupling and skew, the input and output nets should use consistent topology, and unused outputs should be handled according to the manufacturer's pin-description and output-disable guidance rather than left floating.
This product page combines the manufacturer specifications, verified distributor listings, package details, drop-in candidates, comparison data, and practical layout guidance. It is intended to help engineers assess the ICS551MIT for clock distribution and identify the next step for sourcing or PCB-level replacement.
এর জন্য ড্রপ-ইন বিকল্প ICS551MIT — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
ICS551MILFT
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
NB3N551MNR4G
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ICS551MIT বিশেষণ
| Product Type | Clock Fanout Buffer (Distribution) IC |
| Fanout Ratio | 1:4 |
| Maximum Frequency | 160 MHz |
| Input Logic Level | CMOS |
| Output Logic Level | CMOS |
| Supply Voltage Range | 3 V to 5.5 V |
| প্যাকেজ | 8-SOIC, 0.154 inch (3.90 mm) body width |
| মাউন্টিং টাইপ | Surface mount |
| আউটপুটের সংখ্যা | 4 outputs |
| Number of Inputs | 1 input |
| Product Family | IDT ClockBlocks family |
| Cost Position | Low-cost small clock buffer |
| Packaging | Tape |
ICS551MIT 8-soic, 0.154 inch (3.90 mm) body width পিন কনফিগারেশন গাইড
ICS551MIT (8-soic, 0.154 inch (3.90 mm) body width প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ICS551MIT.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
ICS551MIT এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Network Interface Clock Distribution, Communications Equipment Clock Fanout, Test and Measurement Equipment, Industrial Control Logic, Digital Subsystem Clock Tree, General Digital Fanout.
Network Interface Clock Distribution
The ICS551MIT fits network-interface clock distribution when one source must feed four receiving circuits at up to 160 MHz. Its 1:4 fanout reduces the electrical loading presented to the source while providing separate CMOS output branches. According to the manufacturer datasheet, the device operates from 3 V to 5.5 V and supports a maximum frequency of 160 MHz. Place it near the source and receiver clock pins, route short matched branches, and include propagation-delay and output-skew allowances in the interface timing budget.
সুপারিশকৃত
Communications Equipment Clock Fanout
The ICS551MIT can distribute a communications clock to four logic sections without requiring four separate source buffers. Its 1:4 topology, 160 MHz maximum frequency, and CMOS input and output interfaces align with digital clock trees operating from a 3 V to 5.5 V rail. According to the manufacturer datasheet, it is a high-speed member of the IDT ClockBlocks family. The primary design consideration is preserving edge quality by keeping clock traces short, providing a continuous ground reference, and avoiding coupling from high-current switching nodes.
সুপারিশকৃত
Test and Measurement Equipment
The ICS551MIT is suitable for distributing a sampling or reference clock among four measurement, conversion, or control blocks. According to the manufacturer datasheet, it provides one CMOS input, four CMOS outputs, a 160 MHz maximum frequency, and a 3 V to 5.5 V supply range. Use short, impedance-controlled routes and keep the clock network away from noisy analog and switching sections. Confirm propagation delay, output skew, and edge-rate limits against the manufacturer timing data for the selected load.
সুপারিশকৃত
Industrial Control Logic
The ICS551MIT can provide four clock branches for processors, counters, data converters, and interface controllers in an industrial control assembly. Its 1:4 fanout and 160 MHz maximum clock frequency support digital subsystems operating from 3 V to 5.5 V. According to the manufacturer datasheet, the 8-SOIC package provides a compact option for a single-input, four-output clock tree. Engineers should verify supply tolerance, clock levels, timing margin, and thermal performance at the highest operating temperature used by the equipment.
সুপারিশকৃত
Digital Subsystem Clock Tree
The ICS551MIT is useful in a digital subsystem where a controller or oscillator must drive four clock-enabled blocks. According to the manufacturer datasheet, the ICS551MIT recreates one CMOS input at four outputs and operates from 3 V to 5.5 V up to 160 MHz. This arrangement gives each branch a defined source and can reduce fanout demand on the original clock generator. Keep the branches short, avoid stubs, use a solid ground plane, and follow the datasheet instructions for any unused output.
সুপারিশকৃত
General Digital Fanout
The ICS551MIT serves as a general-purpose CMOS clock fanout element in compact control, interface, and data-processing boards. Its key advantage is a four-output clock tree from one input in a single 8-SOIC package. According to the manufacturer datasheet, the maximum operating frequency is 160 MHz and the supply range is 3 V to 5.5 V. Validate output drive against each receiver, maintain consistent clock topology, and calculate the available timing margin from propagation delay and output skew before production release.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ICS551MIT — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | ICS551MILFT | NB3N551MNR4G |
|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | onsemi |
| Package | 8-SOIC, 0.154 inch (3.90 mm) body width | 8-SOIC | 8-pin SOIC |
| Function | Clock fanout buffer | Clock fanout buffer | Clock driver |
মূল পার্থক্যসমূহ
- Single-package 1:4 fanout (বনামICS552-02B)
- Compact SOIC-8 implementation (বনামNB3N551MNR4G)
- Broad single-supply operating range (বনামICS551MILFT)
ডিজাইন নোট
Route the single clock input and four outputs as short, direct traces over an uninterrupted ground plane. Avoid long parallel runs adjacent to switching nodes, connector edges, and power-converter traces. Keep the clock source and ICS551MIT placement close together so that the input trace remains well controlled and the four output branches reach their receivers with similar delay.
Build the system clock budget from propagation delay, output skew, receiver setup and hold requirements, and trace delay rather than using the 160 MHz maximum frequency alone. Preserve consistent branch topology and avoid unnecessary test pads or stubs on sensitive clock nets. Validate each output load and the resulting edge rate using the timing and load information in the manufacturer datasheet.
Use the manufacturer's pin-description table to assign the input, outputs, supply, and ground before PCB release. Place input and output decoupling according to the recommended layout in the datasheet, provide a low-impedance ground connection, and avoid routing clock outputs beneath noisy power-converter areas. Confirm the exact pinout because a generic SOIC-8 clock-buffer drawing may not represent this MPN's lead assignments.
কমপ্লায়েন্স তথ্য
Compliance declarations are not stated in the manufacturer-document excerpts or verified distributor listings. Request the current manufacturer environmental and material declarations before assigning these statuses in a controlled bill of materials.