Renesas Electronics

ICS551MIT - 1:4 Clock Fanout Buffer, 160 MHz | Renesas

MPN: ICS551MIT ✓ Nakahanda
3 V to 5.5 V Vdss 8-SOIC, 0.154 inch (3.90 mm) body width Package 160 MHz Speed
MOQ: 1 |

ICS551MIT Ulas

The Renesas Electronics ICS551MIT is a low-cost, high-speed clock fanout buffer with a 1:4 fanout ratio, maximum operating frequency of 160 MHz, CMOS inputs and CMOS outputs, and a 3 V to 5.5 V supply range. It is packaged in an 8-SOIC package measuring 0.154 inch, or 3.90 mm, in body width.

A clock fanout buffer is a clock-and-timing integrated circuit that distributes one input clock to multiple output branches. It belongs to the hierarchy of clock buffer, clock distribution device, clock and timing IC, and semiconductor. By recreating the input signal at four outputs, the ICS551MIT can reduce the loading on a clock source while supporting multiple downstream clock domains.

The principal features of the ICS551MIT are its 1:4 fanout configuration, 160 MHz maximum frequency, CMOS input and output interfaces, and single-supply operation from 3 V to 5.5 V. The part is identified as a low-cost member of the IDT ClockBlocks family and is positioned for compact, cost-sensitive designs that require more than one clock output without the footprint of a larger multi-output device.

Its architecture separates the single clock input from four buffered CMOS outputs. This arrangement allows one upstream oscillator or controller to feed several clock-enabled circuits while preserving a consistent clock source throughout the subsystem. The manufacturer documentation identifies the device as a small, high-speed clock buffer, although detailed propagation-delay, skew, rise-time, and fall-time limits must be checked in the datasheet before relying on a particular timing budget.

Typical uses include network-interface clock distribution, communications equipment, test and measurement systems, and general digital subsystems requiring a one-input, four-output clock arrangement. The 8-SOIC footprint can also simplify transitions from larger clock-buffer packages when a design requires four outputs but does not need a dual-channel monolithic implementation.

PCB implementation should preserve short clock traces, provide a continuous ground reference, and route outputs away from high-current switching paths. Because clock edges can pick up coupling and skew, the input and output nets should use consistent topology, and unused outputs should be handled according to the manufacturer's pin-description and output-disable guidance rather than left floating.

This product page combines the manufacturer specifications, verified distributor listings, package details, drop-in candidates, comparison data, and practical layout guidance. It is intended to help engineers assess the ICS551MIT for clock distribution and identify the next step for sourcing or PCB-level replacement.

Mga alternatibo na pwedeng ilagay na ICS551MIT — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

ICS551MILFT

✅ Drop-In
📦 8-SOIC
Same 1:4 SOIC-8 clock-buffer family; detailed propagation-delay and skew differences are .

📋 Alternatibo na Reference (hindi sa katalogo)

NB3N551MNR4G

✅ Drop-In
📦 8-SOIC
Same 8-pin clock-buffer footprint; detailed timing differences are , while the cross-reference listing describes consistent terminals and package characteristics.

📋 Alternatibo na Reference (hindi sa katalogo)

ICS551MIT Mga Spesipikasyon

Product Type Clock Fanout Buffer (Distribution) IC
Fanout Ratio 1:4
Maximum Frequency 160 MHz
Input Logic Level CMOS
Output Logic Level CMOS
Supply Voltage Range 3 V to 5.5 V
Packhaging 8-SOIC, 0.154 inch (3.90 mm) body width
Uri ng Pagpapasok Surface mount
Bilang ng Outputs 4 outputs
Number of Inputs 1 input
Product Family IDT ClockBlocks family
Cost Position Low-cost small clock buffer
Packaging Tape

Gabay sa Pin Configuration ng ICS551MIT 8-soic, 0.154 inch (3.90 mm) body width

Pin configuration para sa ICS551MIT (8-soic, 0.154 inch (3.90 mm) body width package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 8-soic, 0.154 inch (3.90 mm) body width package para sa ICS551MIT

Wala ng detalyadong pinout data na magagamit para sa ICS551MIT.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ICS551MIT ay nararapat para sa 6 aplikasyons: Network Interface Clock Distribution, Communications Equipment Clock Fanout, Test and Measurement Equipment, Industrial Control Logic, Digital Subsystem Clock Tree, General Digital Fanout.

🌐

Network Interface Clock Distribution

The ICS551MIT fits network-interface clock distribution when one source must feed four receiving circuits at up to 160 MHz. Its 1:4 fanout reduces the electrical loading presented to the source while providing separate CMOS output branches. According to the manufacturer datasheet, the device operates from 3 V to 5.5 V and supports a maximum frequency of 160 MHz. Place it near the source and receiver clock pins, route short matched branches, and include propagation-delay and output-skew allowances in the interface timing budget.

🌐

Communications Equipment Clock Fanout

The ICS551MIT can distribute a communications clock to four logic sections without requiring four separate source buffers. Its 1:4 topology, 160 MHz maximum frequency, and CMOS input and output interfaces align with digital clock trees operating from a 3 V to 5.5 V rail. According to the manufacturer datasheet, it is a high-speed member of the IDT ClockBlocks family. The primary design consideration is preserving edge quality by keeping clock traces short, providing a continuous ground reference, and avoiding coupling from high-current switching nodes.

🔧

Test and Measurement Equipment

The ICS551MIT is suitable for distributing a sampling or reference clock among four measurement, conversion, or control blocks. According to the manufacturer datasheet, it provides one CMOS input, four CMOS outputs, a 160 MHz maximum frequency, and a 3 V to 5.5 V supply range. Use short, impedance-controlled routes and keep the clock network away from noisy analog and switching sections. Confirm propagation delay, output skew, and edge-rate limits against the manufacturer timing data for the selected load.

🏭

Industrial Control Logic

The ICS551MIT can provide four clock branches for processors, counters, data converters, and interface controllers in an industrial control assembly. Its 1:4 fanout and 160 MHz maximum clock frequency support digital subsystems operating from 3 V to 5.5 V. According to the manufacturer datasheet, the 8-SOIC package provides a compact option for a single-input, four-output clock tree. Engineers should verify supply tolerance, clock levels, timing margin, and thermal performance at the highest operating temperature used by the equipment.

🖥️

Digital Subsystem Clock Tree

The ICS551MIT is useful in a digital subsystem where a controller or oscillator must drive four clock-enabled blocks. According to the manufacturer datasheet, the ICS551MIT recreates one CMOS input at four outputs and operates from 3 V to 5.5 V up to 160 MHz. This arrangement gives each branch a defined source and can reduce fanout demand on the original clock generator. Keep the branches short, avoid stubs, use a solid ground plane, and follow the datasheet instructions for any unused output.

🔧

General Digital Fanout

The ICS551MIT serves as a general-purpose CMOS clock fanout element in compact control, interface, and data-processing boards. Its key advantage is a four-output clock tree from one input in a single 8-SOIC package. According to the manufacturer datasheet, the maximum operating frequency is 160 MHz and the supply range is 3 V to 5.5 V. Validate output drive against each receiver, maintain consistent clock topology, and calculate the available timing margin from propagation delay and output skew before production release.

Buod ng mga Inirekomendang Produkto

ICS552-02B Related monolithic dual clock-buffer device Ginagamit sa: Network Interface Clock Distribution, Communications Equipment Clock Fanout, Test and Measurement Equipment, Industrial Control Logic, Digital Subsystem Clock Tree, General Digital Fanout
What are the key specifications of ICS551MIT that engineers should know?
The ICS551MIT is a 1:4 CMOS clock fanout buffer with a maximum frequency of 160 MHz and a 3 V to 5.5 V supply range. According to the manufacturer datasheet, it uses one input and four CMOS outputs in an 8-SOIC package with a 3.90 mm body width. It is positioned as a low-cost, high-speed member of the IDT ClockBlocks family.
Where can I download the ICS551MIT datasheet PDF?
The ICS551MIT datasheet PDF is available from the manufacturer-document link on this page and from the Integrated Circuit Systems PDF located in the source list. According to the manufacturer datasheet, the document is titled for the ICS551MIT and includes the MDS 551 G revision text identified in the document. Use the pin-description and timing tables before finalizing a clock-routing design.
Where can I find the ICS551MIT pinout?
The ICS551MIT uses an 8-SOIC package, but a complete verified pin-description table is not reproduced on this page. According to the manufacturer datasheet, use the pin-description table and package drawing when assigning PCB nets. This is especially important for identifying the single clock input, the four outputs, the supply pins, and ground before comparing a replacement part.
What is ICS551MIT used for?
The ICS551MIT distributes one CMOS clock input to four CMOS outputs for clock distribution and fanout applications. According to the manufacturer datasheet, it operates up to 160 MHz from a 3 V to 5.5 V supply. It is suitable when multiple digital circuits require clock branches but the system does not require the larger 20-pin footprint of a dual monolithic buffer.
Is ICS551MIT a 1:4 clock buffer?
Yes, the ICS551MIT is a 1:4 clock fanout buffer with one CMOS input and four CMOS outputs. According to the manufacturer datasheet, its maximum frequency is 160 MHz and its supply-voltage range is 3 V to 5.5 V. The 8-SOIC package provides a compact implementation for low-cost clock-distribution designs.
What is the operating voltage of ICS551MIT?
The ICS551MIT operates from 3 V to 5.5 V. According to the manufacturer datasheet, its input and output interfaces are CMOS and its maximum clock frequency is 160 MHz. Confirm input thresholds, output levels, and timing limits for the selected supply voltage in the manufacturer's electrical-characteristics table.
What is the maximum frequency of ICS551MIT?
The maximum frequency of the ICS551MIT is 160 MHz. According to the manufacturer datasheet, the device is a high-speed single-input, four-output CMOS clock buffer. A 160 MHz maximum operating frequency does not by itself define usable system bandwidth, so propagation delay, output skew, and load-dependent edge behavior must also be evaluated.
Can NB3N551MNR4G replace ICS551MIT?
NB3N551MNR4G is the closest supported replacement candidate for ICS551MIT because the comparison information identifies matching terminals and package characteristics. According to the cross-reference listing, it is described as a completely replaceable 8-pin clock-driver part. Validate propagation delay, output skew, supply range, and every pin function against the manufacturer datasheets before production use.
What is the best drop-in replacement for ICS551MIT?
NB3N551MNR4G is the best documented cross-brand drop-in candidate listed for the ICS551MIT, while ICS551MILFT is the closest same-family SOIC-8 candidate. According to the cross-reference listing, NB3N551MNR4G has consistent terminals and package characteristics. Only two candidates could be substantiated as SOIC-8 drop-ins, so no unrelated package variants are presented as equivalents.
What can replace ICS551MIT?
ICS551MILFT and NB3N551MNR4G are the documented same-package candidates for replacing ICS551MIT. According to the manufacturer datasheet and cross-reference listing, both are associated with 8-pin clock-buffer implementations. Confirm pin-level functions, propagation delay, skew, voltage thresholds, and maximum frequency against both datasheets before treating either candidate as a production drop-in.
What is the difference between ICS551MIT and NB3N551MNR4G?
ICS551MIT is a Renesas Electronics 1:4 CMOS clock fanout buffer rated to 160 MHz in an 8-SOIC package. According to the cross-reference listing, NB3N551MNR4G is an 8-pin clock-driver alternative with matching package and terminal characteristics. Detailed timing values are not reproduced here, so use the individual manufacturer timing tables to quantify any performance difference.
When should I choose ICS551MIT over NB3N551MNR4G?
Choose ICS551MIT when your design is already qualified around the Renesas ClockBlocks device and its manufacturer-specific timing and sourcing profile. According to the cross-reference listing, NB3N551MNR4G can be considered when supply continuity or sourcing flexibility is more important. Verify pin assignments and timing behavior on both datasheets before changing the assembled part.
Is ICS551MIT suitable for network-interface clock distribution?
The ICS551MIT can be suitable for network-interface clock distribution when the required clock frequency is at or below 160 MHz and a 1:4 fanout satisfies the topology. According to the manufacturer datasheet, it provides CMOS inputs and outputs from a 3 V to 5.5 V supply. Account for propagation delay, output skew, trace loading, and downstream jitter requirements in the clock budget.
How should ICS551MIT be placed on a PCB?
Place the ICS551MIT close to the clock source and the four receiving circuits, and route each clock branch as a short, continuous trace over a solid ground plane. According to the manufacturer datasheet, the device uses a single input and four CMOS outputs. Keep switching-current loops away from clock traces, maintain consistent output loading, and follow the pin-description table for supply and ground placement.
Where can I buy ICS551MIT and what is its lead time?
Use the Request a Quote form on this page to ask for ICS551MIT availability, current lead time, and order quantities. According to the verified distributor listings, the exact MPN is offered in an 8-SOIC package with tape packaging. Stock and lead time change dynamically and should be confirmed through the quotation process before committing a build schedule.
What is the price of ICS551MIT?
The current ICS551MIT price is not stated because the listing data does not provide a qualifying quantity-break price for the exact MPN. Use the Request a Quote form on this page to request current pricing, stock, minimum order quantity, and lead time. This avoids presenting a stale or unqualified commercial figure.
Is ICS551MIT in stock?
Current stock for the exact ICS551MIT should be confirmed through the Request a Quote form on this page. According to the verified distributor listings, the part is offered with tape packaging in an 8-SOIC package, but a reliable live inventory quantity is not established for this page. Procurement should base its planning on a current quotation response.
Is ICS551MIT RoHS compliant?
The RoHS status of ICS551MIT cannot be confirmed from the technical listing excerpts shown on this page. According to the manufacturer datasheet, the device is a CMOS clock buffer in an 8-SOIC package, while environmental and material declarations are not stated. Request the current manufacturer compliance declaration before using the part in a restricted bill of materials.

Impormasyon ng Talumpati sa Engineering for ICS551MIT — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the ICS551MIT when a design needs one CMOS clock input distributed to four outputs, operates from 3 V to 5.5 V, and remains at or below 160 MHz. Its 8-SOIC footprint and IDT ClockBlocks positioning suit compact, cost-sensitive digital designs. Choose ICS551MILFT when the same Renesas family and SOIC-8 mechanical arrangement are required and its manufacturer-specific ordering or sourcing conditions are preferable. Consider NB3N551MNR4G when supply-chain diversification justifies a cross-brand change and its pin, timing, skew, and electrical characteristics have been validated against the original design. Neither cross-family candidate should be selected solely from package appearance: verify every pin assignment and the complete timing budget before substitution.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto ICS551MILFT NB3N551MNR4G
Brand Renesas Electronics Renesas Electronics onsemi
Package 8-SOIC, 0.154 inch (3.90 mm) body width 8-SOIC 8-pin SOIC
Function Clock fanout buffer Clock fanout buffer Clock driver

Pangunahing mga Pagkakaiba

  • Single-package 1:4 fanout (kumpara saICS552-02B)
  • Compact SOIC-8 implementation (kumpara saNB3N551MNR4G)
  • Broad single-supply operating range (kumpara saICS551MILFT)

Talaan ng Disenyo

Route the single clock input and four outputs as short, direct traces over an uninterrupted ground plane. Avoid long parallel runs adjacent to switching nodes, connector edges, and power-converter traces. Keep the clock source and ICS551MIT placement close together so that the input trace remains well controlled and the four output branches reach their receivers with similar delay.

Build the system clock budget from propagation delay, output skew, receiver setup and hold requirements, and trace delay rather than using the 160 MHz maximum frequency alone. Preserve consistent branch topology and avoid unnecessary test pads or stubs on sensitive clock nets. Validate each output load and the resulting edge rate using the timing and load information in the manufacturer datasheet.

Use the manufacturer's pin-description table to assign the input, outputs, supply, and ground before PCB release. Place input and output decoupling according to the recommended layout in the datasheet, provide a low-impedance ground connection, and avoid routing clock outputs beneath noisy power-converter areas. Confirm the exact pinout because a generic SOIC-8 clock-buffer drawing may not represent this MPN's lead assignments.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Compliance declarations are not stated in the manufacturer-document excerpts or verified distributor listings. Request the current manufacturer environmental and material declarations before assigning these statuses in a controlled bill of materials.

Data napatotohanan sa: 2026-11-11 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

ICS551MIT datasheet ICS551MIT pinout ICS551MIT datasheet pdf ICS551MIT equivalent ICS551MIT replacement ICS551MIT cross reference ICS551MIT vs NB3N551MNR4G ICS551MIT SOIC-8 footprint ICS551MIT 160 MHz clock buffer ICS551MIT application circuit ICS551MIT price ICS551MIT stock Renesas ICS551MIT

Mga kaugnay na Mga Komponente at mga Tuntunin

Renesas Electronics ICS551MIT ICS551MILFT NB3N551MNR4G onsemi clock fanout buffer clock distribution buffer clock and timing IC semiconductor CMOS 1:4 fanout 160 MHz 8-SOIC SOIC family surface mount SMD IDT ClockBlocks propagation delay output skew clock tree 3 V to 5.5 V signal integrity PCB layout network interface test and measurement equipment
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ