ISL8392IBZ - Quad SPST Analog Switch | Renesas Electronics
MPN: ISL8392IBZ ✓ সক্রিয়ISL8392IBZ সারাংশ
An analog switch is an integrated semiconductor device that connects or disconnects an analog signal path under digital control. The ISL8392IBZ belongs to the broader hierarchy of analog switches, multiplexers, interface ICs, and signal-routing semiconductors. Unlike a mechanical relay, it can operate rapidly with low control power and without mechanical contact wear. Its four SPST channels can route signals independently, making the device useful in battery-powered instrumentation, test systems, sample-and-hold circuits, and peripheral-selection networks.
The switch's CMOS construction supports low power consumption of approximately 1 µW and maximum leakage of 2.5 nA. Fast 60 ns turn-on and 30 ns turn-off times reduce the dead time when changing signal paths. Maximum on-resistance flatness of 4 Ω helps limit gain or timing variation across the operating voltage range. The single- and dual-supply flexibility also allows the same device to be used in grounded positive-rail systems or bipolar-style signal environments, subject to the absolute maximum ratings and logic-level requirements in the datasheet.
The ISL8392 family uses CMOS circuitry to achieve low on-state resistance and low off-state leakage. Its four channels are designed for precision signal routing, where the control inputs determine whether each common terminal is connected to its corresponding input. Because an analog switch can introduce resistance, capacitance, charge injection, and off-state leakage into a signal path, the application must account for source impedance, settling time, control timing, and the voltage range applied to each terminal.
Typical uses include battery-powered test equipment, automated measurement systems, signal multiplexing, audio path routing, data acquisition modules, and industrial control circuits. The device is particularly useful when several low-level signals must be selected electronically without using multiple discrete relay packages. For dual-rail designs, the ±2 V to ±6 V operating range provides compatibility with bipolar analog signals, while single-supply designs support systems operating between +2 V and +12 V.
Design the input and control pins so that every voltage remains within the limits specified by the manufacturer datasheet. Keep sensitive signal traces short, provide a stable return path, and account for control-pin timing when the selected channel must settle before measurement. The 16-SOIC package supports conventional surface-mount assembly, but pin-compatible substitution still requires verification of electrical limits, logic thresholds, control polarity, and switching behavior.
This product page combines the manufacturer specifications, package information, functional guidance, comparison criteria, and design considerations needed to evaluate the ISL8392IBZ. It also distinguishes verified same-family options from unsupported substitutes, helping engineers make a replacement decision without assuming that similar switch counts or package names guarantee pin-to-pin compatibility.
এর জন্য ড্রপ-ইন বিকল্প ISL8392IBZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible ISL8392IBZ (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Switch Configuration, Power Consumption.
ISL8392IB
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →ISL8392IBZ-TR
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ISL8392IBZ সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Number of Circuits | 4 circuits |
| Switch Configuration | 4 x SPST |
| Single-Supply Voltage Range | +2 V to +12 V |
| Dual-Supply Voltage Range | ±2 V to ±6 V |
| Power Consumption | Approximately 1 µW |
| Off-State Leakage Current | 2.5 nA maximum |
| Turn-On Time | 60 ns |
| Turn-Off Time | 30 ns |
| On-Resistance Flatness | 4 Ω maximum |
| On-Resistance | 35 Ω |
| Technology | CMOS |
| Device Type | Quad SPST normally open analog switch |
| প্যাকেজ | 16-SOIC |
| মাউন্টিং টাইপ | Surface mount |
| Temperature Grade | Industrial |
| Termination | Pb-free |
ISL8392IBZ 16-soic পিন কনফিগারেশন গাইড
ISL8392IBZ (16-soic প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ISL8392IBZ.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
ISL8392IBZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Battery-Powered Analog Test Equipment, Data Acquisition Multiplexing, Precision Signal Multiplexing, Low-Voltage Audio Path Routing, Industrial Control Signal Routing, Sample-and-Hold Signal Paths.
Battery-Powered Analog Test Equipment
The ISL8392IBZ fits portable measurement instruments that route several low-level signals while preserving battery life. Its CMOS architecture provides approximately 1 µW power consumption, while the 2.5 nA maximum off-state leakage limits the error introduced by inactive channels. Four independent normally open SPST paths can select test inputs, guard references, or calibration nodes without requiring four relay packages. The 60 ns tON and 30 ns tOFF characteristics support rapid measurement sequences. Designers should still include source resistance, cable capacitance, and control timing in the settling calculation because the switch transition time alone does not determine the total acquisition time.
সুপারিশকৃত
Data Acquisition Multiplexing
The ISL8392IBZ can route four analog inputs through a shared measurement chain in a data-acquisition module. Its four SPST channels provide independent selection of sensor or reference signals, while 35 Ω listed on-resistance is suitable for many medium-impedance sensing paths. The 4 Ω maximum on-resistance flatness helps reduce channel-dependent variation, and 60 ns tON supports quick selection between samples. For high-accuracy systems, account for switch capacitance, charge injection, leakage, and the time required for the selected node to settle before acquisition starts.
সুপারিশকৃত
Precision Signal Multiplexing
The ISL8392IBZ is appropriate for precision multiplexing systems that need to connect one of several low-voltage nodes to a common signal path. Its low 2.5 nA maximum leakage is valuable when the source impedance is high, because leakage can create an error voltage at the selected input. The fast 30 ns tOFF and 60 ns tON permit short switching intervals, while dual-supply operation from ±2 V to ±6 V supports signals centered around ground. Layout should minimize parasitic capacitance around the common pins and use a grounded return path to reduce coupling during transitions.
সুপারিশকৃত
Low-Voltage Audio Path Routing
The ISL8392IBZ can select among low-voltage audio or control signals in compact equipment that requires fast, low-power switching. Its 35 Ω on-resistance is compatible with many line-level and control paths, while 30 ns tOFF and 60 ns tON allow channel changes without long transition delays. In dual-supply systems, operation from ±2 V to ±6 V permits routing signals referenced to ground. The off-state leakage of 2.5 nA helps prevent inactive channels from loading the active path, although board leakage and the impedance of the source still contribute to total error.
সুপারিশকৃত
Industrial Control Signal Routing
The ISL8392IBZ is useful in industrial control modules that must select among low-voltage analog command, feedback, or diagnostic signals. Its industrial-grade ordering designation and surface-mount 16-SOIC construction support compact control assemblies. Four independent channels can manage separate signal paths without using several single-switch packages, while approximately 1 µW power consumption benefits continuously powered systems. The control logic must maintain valid levels during supply transitions, and every routed signal must remain within the absolute maximum limits listed by the manufacturer.
সুপারিশকৃত
Sample-and-Hold Signal Paths
The ISL8392IBZ can support sample-and-hold and track-and-hold arrangements by rapidly connecting a selected source to a holding network. The 60 ns tON and 30 ns tOFF transitions allow the control sequence to proceed quickly, while the four channels can route different acquisition inputs. Effective performance depends on the external capacitor, switch on-resistance, parasitic capacitance, and leakage balance. Use short traces, a low-leakage hold capacitor, and a defined acquisition interval, and evaluate settling against the required measurement resolution rather than relying on switching time alone.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ISL8392IBZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | ISL8392IB | ISL8392IBZ-TR |
|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 16-SOIC | 16-SOIC | 16-SOIC |
| Number of Circuits | 4 circuits | 4 circuits | 4 circuits |
| Switch Configuration | 4 x SPST, normally open | 4 x SPST, normally open | 4 x SPST, normally open |
| Single-Supply Voltage Range | +2 V to +12 V | +2 V to +12 V | +2 V to +12 V |
| Dual-Supply Voltage Range | ±2 V to ±6 V | ±2 V to ±6 V | ±2 V to ±6 V |
| Turn-On Time | 60 ns | 60 ns | 60 ns |
| Turn-Off Time | 30 ns | 30 ns | 30 ns |
| Off-State Leakage Current | 2.5 nA maximum | 2.5 nA maximum | 2.5 nA maximum |
মূল পার্থক্যসমূহ
- Four independently controlled channels in one compact package (বনামISL8392IB)
- Fast complementary switching timing (বনামISL8392IBZ-TR)
- Low-leakage CMOS routing for precision paths (বনামISL8392IB)
ডিজাইন নোট
Treat the switch transition time and the complete measurement settling time as separate quantities. Although the ISL8392IBZ specifies 60 ns tON and 30 ns tOFF, the selected node also sees switch capacitance, PCB capacitance, source resistance, on-resistance, and possible charge injection. Calculate the acquisition delay from the full equivalent circuit and verify it with the highest-impedance signal used in the design.
Place the switch close to the source and destination of each routed analog signal to minimize parasitic capacitance and susceptibility to coupling. Keep common and input traces short, provide a continuous ground reference, and avoid sharing high-impedance nodes with clock or fast digital routes. In dual-supply layouts, maintain symmetric return paths to reduce conversion of common-mode noise into differential signal error.
Do not infer control polarity from the suffix or compare only the number of switches and package pins. A valid replacement must also preserve the logical relationship between the control inputs and common terminals, control-input thresholds, absolute maximum ratings, switch capacitance, leakage, and on-resistance behavior. Verify the manufacturer pin diagram and ordering information before substituting another suffix or a different manufacturer's device.
Design the power rails and digital control signals so they remain valid while the analog path changes. The ISL8392IBZ can operate from +2 V to +12 V or ±2 V to ±6 V, but the selected mode must comply with the logic thresholds and absolute maximum ratings. Provide adequate local supply decoupling, keep control transitions clean, and avoid allowing an analog input to exceed the permitted terminal voltage while its channel is open.
কমপ্লায়েন্স তথ্য
The published ISL8392IBZ listing identifies the device as Pb-free. A complete RoHS, REACH, halogen-free, and conflict-minerals declaration was not available in the accessed manufacturer material.