Renesas Electronics

ISL8392IBZ - Quad SPST Analog Switch | Renesas Electronics

부품 번호: ISL8392IBZ ✓ 활성
+2 V to +12 V Vdss 2.5 nA maximum Id 4 Ω maximum Rds(on) 16-SOIC Package
MOQ: 1 |

ISL8392IBZ 개요

Renesas Electronics ISL8392IBZ is a low-voltage CMOS analog switch containing four independent single-pole single-throw channels in a 16-SOIC package. Designed for single-supply operation from +2 V to +12 V, it also supports dual-supply operation from ±2 V to ±6 V. Key switching characteristics include 60 ns tON, 30 ns tOFF, 2.5 nA maximum leakage current, and 4 Ω maximum on-resistance flatness. These characteristics make the device suitable for routing low-voltage analog signals where low power consumption, fast transitions, and compact implementation are important.

An analog switch is an integrated semiconductor device that connects or disconnects an analog signal path under digital control. The ISL8392IBZ belongs to the broader hierarchy of analog switches, multiplexers, interface ICs, and signal-routing semiconductors. Unlike a mechanical relay, it can operate rapidly with low control power and without mechanical contact wear. Its four SPST channels can route signals independently, making the device useful in battery-powered instrumentation, test systems, sample-and-hold circuits, and peripheral-selection networks.

The switch's CMOS construction supports low power consumption of approximately 1 µW and maximum leakage of 2.5 nA. Fast 60 ns turn-on and 30 ns turn-off times reduce the dead time when changing signal paths. Maximum on-resistance flatness of 4 Ω helps limit gain or timing variation across the operating voltage range. The single- and dual-supply flexibility also allows the same device to be used in grounded positive-rail systems or bipolar-style signal environments, subject to the absolute maximum ratings and logic-level requirements in the datasheet.

The ISL8392 family uses CMOS circuitry to achieve low on-state resistance and low off-state leakage. Its four channels are designed for precision signal routing, where the control inputs determine whether each common terminal is connected to its corresponding input. Because an analog switch can introduce resistance, capacitance, charge injection, and off-state leakage into a signal path, the application must account for source impedance, settling time, control timing, and the voltage range applied to each terminal.

Typical uses include battery-powered test equipment, automated measurement systems, signal multiplexing, audio path routing, data acquisition modules, and industrial control circuits. The device is particularly useful when several low-level signals must be selected electronically without using multiple discrete relay packages. For dual-rail designs, the ±2 V to ±6 V operating range provides compatibility with bipolar analog signals, while single-supply designs support systems operating between +2 V and +12 V.

Design the input and control pins so that every voltage remains within the limits specified by the manufacturer datasheet. Keep sensitive signal traces short, provide a stable return path, and account for control-pin timing when the selected channel must settle before measurement. The 16-SOIC package supports conventional surface-mount assembly, but pin-compatible substitution still requires verification of electrical limits, logic thresholds, control polarity, and switching behavior.

This product page combines the manufacturer specifications, package information, functional guidance, comparison criteria, and design considerations needed to evaluate the ISL8392IBZ. It also distinguishes verified same-family options from unsupported substitutes, helping engineers make a replacement decision without assuming that similar switch counts or package names guarantee pin-to-pin compatibility.

드롭인 대체품: ISL8392IBZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ISL8392IBZ (동일 폼 팩터 및 풋프린트) — 차이점: Package, Switch Configuration, Power Consumption.

Renesas Electronics
Package: 16-pin SOIC
Switch Configuration: 1:1 SPST
Power Consumption: 1 microwatt typical
비교 대상: ISL8392IBZ →
Renesas Electronics
Switch Configuration: 1:1 SPST
비교 대상: ISL8392IBZ →

ISL8392IB

✅ 드롭인
Renesas Electronics
📦 16-SOIC
4 circuits · 1:1 SPST · 35 Ω · +2 V to +12 V · ±2 V to ±6 V · 1 µW · 2.5 nA · 60 ns

가격 문의

데이터시트 보기 →

ISL8392IBZ-TR

✅ 드롭인
📦 16-SOIC
Same-family ordering option with published tON of 60 ns and tOFF of 30 ns, a 0% timing difference; confirm the manufacturer ordering suffix and packing method.

📋 참조 대체품 (카탈로그에 없음)

ISL8392IBZ 최대 정격 & 전기적 특성

Number of Circuits 4 circuits
Switch Configuration 4 x SPST
Single-Supply Voltage Range +2 V to +12 V
Dual-Supply Voltage Range ±2 V to ±6 V
Power Consumption Approximately 1 µW
Off-State Leakage Current 2.5 nA maximum
Turn-On Time 60 ns
Turn-Off Time 30 ns
On-Resistance Flatness 4 Ω maximum
On-Resistance 35 Ω
Technology CMOS
Device Type Quad SPST normally open analog switch
패키지 16-SOIC
실장 유형 Surface mount
Temperature Grade Industrial
Termination Pb-free

ISL8392IBZ 16-soic 핀 구성 가이드

ISL8392IBZ(16-soic 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

ISL8392IBZ의 16-soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ISL8392IBZ.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ISL8392IBZ 적합 용도: 6 애플리케이션s: Battery-Powered Analog Test Equipment, Data Acquisition Multiplexing, Precision Signal Multiplexing, Low-Voltage Audio Path Routing, Industrial Control Signal Routing, Sample-and-Hold Signal Paths.

🔋

Battery-Powered Analog Test Equipment

The ISL8392IBZ fits portable measurement instruments that route several low-level signals while preserving battery life. Its CMOS architecture provides approximately 1 µW power consumption, while the 2.5 nA maximum off-state leakage limits the error introduced by inactive channels. Four independent normally open SPST paths can select test inputs, guard references, or calibration nodes without requiring four relay packages. The 60 ns tON and 30 ns tOFF characteristics support rapid measurement sequences. Designers should still include source resistance, cable capacitance, and control timing in the settling calculation because the switch transition time alone does not determine the total acquisition time.

📊

Data Acquisition Multiplexing

The ISL8392IBZ can route four analog inputs through a shared measurement chain in a data-acquisition module. Its four SPST channels provide independent selection of sensor or reference signals, while 35 Ω listed on-resistance is suitable for many medium-impedance sensing paths. The 4 Ω maximum on-resistance flatness helps reduce channel-dependent variation, and 60 ns tON supports quick selection between samples. For high-accuracy systems, account for switch capacitance, charge injection, leakage, and the time required for the selected node to settle before acquisition starts.

🎛️

Precision Signal Multiplexing

The ISL8392IBZ is appropriate for precision multiplexing systems that need to connect one of several low-voltage nodes to a common signal path. Its low 2.5 nA maximum leakage is valuable when the source impedance is high, because leakage can create an error voltage at the selected input. The fast 30 ns tOFF and 60 ns tON permit short switching intervals, while dual-supply operation from ±2 V to ±6 V supports signals centered around ground. Layout should minimize parasitic capacitance around the common pins and use a grounded return path to reduce coupling during transitions.

🎧

Low-Voltage Audio Path Routing

The ISL8392IBZ can select among low-voltage audio or control signals in compact equipment that requires fast, low-power switching. Its 35 Ω on-resistance is compatible with many line-level and control paths, while 30 ns tOFF and 60 ns tON allow channel changes without long transition delays. In dual-supply systems, operation from ±2 V to ±6 V permits routing signals referenced to ground. The off-state leakage of 2.5 nA helps prevent inactive channels from loading the active path, although board leakage and the impedance of the source still contribute to total error.

🏭

Industrial Control Signal Routing

The ISL8392IBZ is useful in industrial control modules that must select among low-voltage analog command, feedback, or diagnostic signals. Its industrial-grade ordering designation and surface-mount 16-SOIC construction support compact control assemblies. Four independent channels can manage separate signal paths without using several single-switch packages, while approximately 1 µW power consumption benefits continuously powered systems. The control logic must maintain valid levels during supply transitions, and every routed signal must remain within the absolute maximum limits listed by the manufacturer.

⚡

Sample-and-Hold Signal Paths

The ISL8392IBZ can support sample-and-hold and track-and-hold arrangements by rapidly connecting a selected source to a holding network. The 60 ns tON and 30 ns tOFF transitions allow the control sequence to proceed quickly, while the four channels can route different acquisition inputs. Effective performance depends on the external capacitor, switch on-resistance, parasitic capacitance, and leakage balance. Use short traces, a low-leakage hold capacitor, and a defined acquisition interval, and evaluate settling against the required measurement resolution rather than relying on switching time alone.

What are the key specifications of ISL8392IBZ that engineers should know?
The ISL8392IBZ is a four-channel SPST CMOS analog switch in a 16-SOIC package. According to the Renesas product page, it operates from a single +2 V to +12 V source or from dual ±2 V to ±6 V supplies, with 60 ns tON, 30 ns tOFF, 2.5 nA maximum leakage current, and 4 Ω maximum on-resistance flatness. Its four independent normally open channels provide compact signal routing for low-voltage analog systems.
What is the operating voltage of ISL8392IBZ?
The ISL8392IBZ supports a single supply from +2 V to +12 V or a dual supply from ±2 V to ±6 V. According to the manufacturer product page, both operating modes are intended for low-voltage precision switching. The selected supply configuration must also satisfy the control-input logic thresholds and absolute maximum ratings in the manufacturer datasheet, so designers should confirm each terminal voltage before applying signals.
Where can I download the ISL8392IBZ datasheet PDF?
The official ISL8392IBZ datasheet can be located through the Renesas part-details page at https://www.renesas.com/en/products/isl8392/part-details/isl8392ibz. That page identifies the device as a low-voltage quad SPST CMOS analog switch and provides the manufacturer documentation needed to verify pin assignments, electrical characteristics, logic levels, and absolute maximum ratings. Use the manufacturer copy for design sign-off.
Where is the ISL8392IBZ pinout located?
The ISL8392IBZ pinout is located in the pin-configuration section of the Renesas manufacturer datasheet for the 16-SOIC package. Use that diagram when assigning the four input terminals, four common terminals, control inputs, supply pins, and ground connections. The 16-SOIC package drawing identifies physical orientation, but it should not be used by itself to determine active-high or active-low control behavior.
What is the switching speed of ISL8392IBZ?
The ISL8392IBZ has a 60 ns turn-on time and a 30 ns turn-off time according to the Renesas product page. These fast transition times suit automated test systems, signal multiplexing, and data-acquisition paths where channel selection must occur quickly. Actual system settling can take longer because it also depends on capacitance, source resistance, on-resistance, control timing, and the required measurement accuracy.
How much leakage current does ISL8392IBZ consume in the off state?
The maximum off-state leakage current of the ISL8392IBZ is 2.5 nA, as stated on the Renesas product page. Low leakage is especially useful in battery-powered analog equipment because it reduces signal-path error and avoids wasting charge when a switch is not conducting. The overall power consumption is approximately 1 µW, making the device appropriate for low-duty-cycle, precision, and portable measurement systems.
Is ISL8392IBZ suitable for battery-powered equipment?
Yes, the ISL8392IBZ is suitable for battery-powered equipment because its CMOS design provides approximately 1 µW power consumption and no more than 2.5 nA off-state leakage. The device accepts single supplies from +2 V to +12 V, which covers common low-voltage battery-regulated rails. Designers should still calculate the complete signal-path budget, including control logic and leakage from surrounding circuitry.
Can ISL8392IBZ handle dual-supply analog signals?
Yes, the ISL8392IBZ can operate from ±2 V to ±6 V in a dual-supply configuration, allowing normally open SPST channels to route signals around ground when the system uses bipolar rails. The manufacturer identifies dual-supply operation as a core feature. Confirm that each signal and control terminal remains within its specified voltage range and that the logic thresholds are compatible with the control circuitry.
What is the difference between ISL8392IBZ and ISL8392IB?
The ISL8392IBZ and ISL8392IB are same-family Renesas orderable options for the ISL8392 quad-SPST switch, and the published switching characteristics remain 60 ns tON and 30 ns tOFF for both. The identified distinction concerns package/order configuration rather than a different circuit function. Before substitution, confirm the manufacturer ordering table for lead style, packing method, temperature grade, and marking.
Is ISL8392IBZ the same as ISL8392IBZ-TR?
The ISL8392IBZ and ISL8392IBZ-TR identify the same quad-SPST switch function, with both retaining the published 60 ns tON and 30 ns tOFF switching times. Their order codes differ, so the exact suffix must be checked against the required package, packing method, and assembly logistics. The electrical function and 16-SOIC footprint should not be assumed for every alternate suffix without checking the manufacturer ordering information.
When should I choose ISL8392IBZ over a similar analog switch?
Choose ISL8392IBZ when a design needs four independent normally open SPST channels, very low leakage, and transition times of 60 ns tON and 30 ns tOFF in a 16-SOIC footprint. It is particularly suitable for portable or precision routing systems that can use a +2 V to +12 V single supply or ±2 V to ±6 V dual supply. Choose another switch only when a different resistance, capacitance, logic, protection, or channel topology is needed.
Is ISL8392IBZ suitable for analog test and measurement systems?
Yes, the ISL8392IBZ fits many analog test and measurement paths because it combines four fast SPST channels, 35 Ω listed on-resistance, 4 Ω maximum on-resistance flatness, and 2.5 nA maximum leakage. The fast 60 ns tON and 30 ns tOFF transitions permit rapid path changes. Measurement accuracy can still be limited by switch capacitance, injected charge, source impedance, and settling time.
What is the best drop-in replacement for ISL8392IBZ?
The best confirmed drop-in choices are the same-family ISL8392IB and ISL8392IBZ-TR options, which preserve the ISL8392 quad-SPST function and published 60 ns tON and 30 ns tOFF timing. No distinct cross-brand drop-in part with verified pin compatibility and electrical equivalence was identified in the available cross-reference material. Confirm the exact ordering suffix and manufacturer pin configuration before replacing ISL8392IBZ.
What can replace ISL8392IBZ?
ISL8392IB and ISL8392IBZ-TR are the available same-family replacements for ISL8392IBZ because they retain the quad-SPST switch configuration and published switching times of 60 ns tON and 30 ns tOFF. A substitute from another manufacturer should not be assumed to be drop-in compatible merely because it also uses a 16-SOIC package. Its pin map, control polarity, logic thresholds, resistance, capacitance, and supply limits must be verified first.
Where can I request a quote and current lead time for ISL8392IBZ?
Use the Request a Quote form on this page to request the current ISL8392IBZ price, stock position, lead time, and order quantity. The form is the appropriate route for transaction-specific data because market availability and commercial terms can change. Include the exact ISL8392IBZ suffix, required quantity, and preferred packaging so the quote can be matched to the intended 16-SOIC assembly option.
Is ISL8392IBZ in stock?
The ISL8392IBZ is listed by current authorized-channel product pages with ordering and shipment information, indicating that the part remains commercially available. Exact stock changes by package suffix and order quantity. Request a Quote on this page for a current allocation, with the desired ISL8392IBZ quantity and packing method, rather than relying on a historical listing status.
What is the price of ISL8392IBZ?
The current commercial price for ISL8392IBZ depends on order quantity, package suffix, packing method, and current market conditions. Request a Quote on this page to obtain the applicable unit pricing and quantity breaks for the exact ISL8392IBZ configuration. Provide the required quantity, delivery location, and target package format so the commercial response reflects the actual procurement requirement.
What is the best Renesas Electronics equivalent for ISL8392IBZ?
The best supported Renesas Electronics equivalent is the ISL8392IB or ISL8392IBZ-TR orderable form within the ISL8392 family. Each retains the quad-SPST function and the published 60 ns tON and 30 ns tOFF timing while using the 16-SOIC format. The suffix selection should be made from the manufacturer ordering table to match packing and assembly requirements exactly.
Does ISL8392IBZ comply with RoHS and REACH?
The published ISL8392IBZ product information identifies the device as Pb-free, but a definitive RoHS or REACH declaration was not present in the accessible manufacturer material used for this page. Treat RoHS and REACH status as requiring documentary confirmation from the current Renesas product or quality documentation. The Pb-free marking alone should not be treated as a substitute for the complete compliance declaration.

엔지니어링 참조 데이터: ISL8392IBZ — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose ISL8392IBZ for a compact four-channel, normally open analog-routing design that requires fast 60 ns tON and 30 ns tOFF operation, low 2.5 nA maximum leakage, and flexibility between +2 V to +12 V single supply or ±2 V to ±6 V dual supply. ISL8392IB is a same-family option when its exact ordering, lead, and packing configuration meet the assembly plan. ISL8392IBZ-TR offers another same-family ordering route with unchanged published switching timing. For another manufacturer's switch, do not choose solely from the 16-SOIC package: require pin-level compatibility, matching control polarity and thresholds, acceptable on-resistance and capacitance, suitable supply ratings, and documented leakage. If the design needs lower resistance, higher voltage operation, integrated protection, or a multiplexer rather than four independent SPST channels, use a different device family and allow the PCB layout to change.

대체품과의 비교

파라미터 이 제품 ISL8392IB ISL8392IBZ-TR
Brand Renesas Electronics Renesas Electronics Renesas Electronics
Package 16-SOIC 16-SOIC 16-SOIC
Number of Circuits 4 circuits 4 circuits 4 circuits
Switch Configuration 4 x SPST, normally open 4 x SPST, normally open 4 x SPST, normally open
Single-Supply Voltage Range +2 V to +12 V +2 V to +12 V +2 V to +12 V
Dual-Supply Voltage Range ±2 V to ±6 V ±2 V to ±6 V ±2 V to ±6 V
Turn-On Time 60 ns 60 ns 60 ns
Turn-Off Time 30 ns 30 ns 30 ns
Off-State Leakage Current 2.5 nA maximum 2.5 nA maximum 2.5 nA maximum

주요 차별점

  • Four independently controlled channels in one compact package (vs ISL8392IB)
  • Fast complementary switching timing (vs ISL8392IBZ-TR)
  • Low-leakage CMOS routing for precision paths (vs ISL8392IB)

설계 노트

Treat the switch transition time and the complete measurement settling time as separate quantities. Although the ISL8392IBZ specifies 60 ns tON and 30 ns tOFF, the selected node also sees switch capacitance, PCB capacitance, source resistance, on-resistance, and possible charge injection. Calculate the acquisition delay from the full equivalent circuit and verify it with the highest-impedance signal used in the design.

Place the switch close to the source and destination of each routed analog signal to minimize parasitic capacitance and susceptibility to coupling. Keep common and input traces short, provide a continuous ground reference, and avoid sharing high-impedance nodes with clock or fast digital routes. In dual-supply layouts, maintain symmetric return paths to reduce conversion of common-mode noise into differential signal error.

Do not infer control polarity from the suffix or compare only the number of switches and package pins. A valid replacement must also preserve the logical relationship between the control inputs and common terminals, control-input thresholds, absolute maximum ratings, switch capacitance, leakage, and on-resistance behavior. Verify the manufacturer pin diagram and ordering information before substituting another suffix or a different manufacturer's device.

Design the power rails and digital control signals so they remain valid while the analog path changes. The ISL8392IBZ can operate from +2 V to +12 V or ±2 V to ±6 V, but the selected mode must comply with the logic thresholds and absolute maximum ratings. Provide adequate local supply decoupling, keep control transitions clean, and avoid allowing an analog input to exceed the permitted terminal voltage while its channel is open.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Yes
무할로겐
Unknown
분쟁 광물
Unknown

The published ISL8392IBZ listing identifies the device as Pb-free. A complete RoHS, REACH, halogen-free, and conflict-minerals declaration was not available in the accessed manufacturer material.

관련 검색

ISL8392IBZ datasheet ISL8392IBZ datasheet pdf ISL8392IBZ pinout ISL8392IBZ specifications Renesas ISL8392IBZ ISL8392IBZ equivalent ISL8392IBZ replacement ISL8392IBZ cross reference ISL8392IBZ vs ISL8392IB ISL8392IBZ 16-SOIC footprint ISL8392IBZ analog switch application ISL8392IBZ price ISL8392IBZ stock

관련 부품 & 용어

Renesas Electronics ISL8392IBZ ISL8392IB ISL8392IBZ-TR analog switch SPST switch normally open switch CMOS interface IC signal routing IC single-supply operation dual-supply operation on-resistance on-resistance flatness off-state leakage current turn-on time turn-off time 16-SOIC SOIC package surface-mount package battery-powered equipment data acquisition precision multiplexing industrial control sample-and-hold
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기