Renesas Electronics

ISL84684IR - Dual 2:1 Analog Switch, 500mOhm | Renesas

MPN: ISL84684IR ✓ সক্রিয়
40nA Vdss 4nA Id 500mOhm Rds(on) 10-TDFN (3 x 3 mm) Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ISL84684IR সারাংশ

The Renesas Electronics ISL84684IR is a dual 2:1 analog switch with 500mOhm on-resistance, low 27ns switching performance, and a 10-pin TDFN package measuring 3 x 3 mm. The device provides two independent SPDT switch circuits for routing low-voltage analog or digital signals, combining compact area with fast operation for signal-control and multiplexing requirements.

An analog switch is an interface IC that connects or disconnects signal paths under digital control. In the broader semiconductor hierarchy, it belongs to the switch and multiplexer family within interface ICs. Each SPDT circuit can route one common terminal to one of two switched terminals, allowing a controller to select among sensors, amplifiers, filters, converters, or other signal sources without changing the external board layout.

The ISL84684IR combines a 500mOhm on-resistance with 27ns switching time, helping preserve signal integrity when the switched nodes operate at moderate or low frequencies. Its 50ns break time supports fast control transitions. The 4nA leakage specification is particularly relevant to high-impedance analog nodes, where leakage can create offset errors, unwanted loading, or errors in downstream measurement circuits.

The device uses a 10-TDFN surface-mount package with dimensions of 3 x 3 mm. Its compact footprint is useful in portable instruments, test systems, communication equipment, and mixed-signal products where routing density matters. The dual-circuit configuration also lets one package control two related switch paths, reducing component count compared with separate single switches where board area is constrained.

Typical applications include audio path routing, sensor selection, test-and-measurement signal control, communications equipment, and industrial interface modules. Two switch sections can be used for complementary routing, isolation between functional blocks, or redundant paths. Designers should still verify signal levels, control-logic compatibility, leakage effects, and switching transients against the application’s operating conditions.

The principal design consideration is ensuring that the driven signal remains within the switch’s electrical limits while control transitions do not inject unacceptable disturbance into sensitive downstream circuitry. Keep routing short, use a stable ground reference, and place appropriate bypass capacitance near the supply pins. Confirm the complete pin configuration and exposed-pad connection directly from the manufacturer datasheet before fabrication.

This page combines package, switching, leakage, sourcing, pinout-location, drop-in replacement, and application guidance for engineers evaluating the ISL84684IR. It also identifies the confirmed same-package alternatives and highlights the trade-offs involved when changing vendors or selecting related switch configurations.

এর জন্য ড্রপ-ইন বিকল্প ISL84684IR — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

ISL84684IRZ

✅ ড্রপ-ইন
📦 10-TDFN (3 x 3 mm)
Same TDFN package, terminals, and functional characteristics; ordering and temperature-grade suffixes require verification, 0% identified functional difference

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

FSA2257L10X

✅ ড্রপ-ইন
📦 10-TDFN (3 x 3 mm)
Same 10-TDFN package and 40nA supply-current class; on-resistance and switching-time differences require datasheet verification

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ISL84684IR সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Number of Switch Circuits 2 circuits
Switch Configuration 2:1 SPDT per circuit
On-Resistance 500mOhm
Switching Time 27ns
Break Time 50ns
Leakage Current 4nA
সাপ্লাই কারেন্ট 40nA
প্যাকেজ 10-TDFN (3 x 3 mm)
পিনের সংখ্যা 10 pins
মাউন্টিং টাইপ Surface mount
Number of Switches 2 switches
Product Type Analog switch

ISL84684IR 10-tdfn (3 x 3 mm) পিন কনফিগারেশন গাইড

ISL84684IR (10-tdfn (3 x 3 mm) প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

ISL84684IR-এর জন্য 10-tdfn (3 x 3 mm) প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ISL84684IR.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ISL84684IR এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Sensor Signal Routing, Test and Measurement Signal Control, Audio Signal Selection, Communications Interface Routing, Industrial Control Signal Multiplexing, Portable and Wearable Signal Control.

🧩

Sensor Signal Routing

The ISL84684IR can select between two sensor outputs while preserving a compact board footprint. Its two 2:1 switch sections provide a straightforward way to route a common measurement channel toward one of two inputs, and its 500mOhm on-resistance keeps channel resistance low relative to many high-impedance sensing paths. The 4nA leakage characteristic is also useful when the selected sensor has a high output impedance, because leakage current can produce offset error. Before committing the layout, verify the sensor signal range, supply limits, control thresholds, and whether the exposed pad must be connected to ground. Keep sensitive sensor traces away from control lines and use a quiet ground reference for accurate measurements.

🔧

Test and Measurement Signal Control

The ISL84684IR suits test-and-measurement systems that must route a common input to one of two sources or destinations. Its 27ns switching time provides rapid control response, while the 50ns break time helps define the transition behavior of the selected path. The low 4nA leakage can reduce bias errors when the switch is placed next to high-impedance instrumentation. A dual section can control complementary or related routes without requiring two separate packages. Engineers should still calculate insertion loss, bandwidth, and off-channel behavior from the complete datasheet characteristics. Place the device close to the controlled nodes and provide a low-impedance ground return to minimize sensitivity to external pickup.

🎧

Audio Signal Selection

The ISL84684IR can select between two audio paths when the signals remain within the device’s supported voltage and frequency limits. Its 500mOhm on-resistance provides a defined connection resistance, and the compact 10-TDFN package leaves more board area for analog stages, connectors, and filtering networks. For low-level audio nodes, the 4nA leakage specification helps limit additional bias current at the switched output. Evaluate channel-to-channel matching, off-isolation, bandwidth, and distortion-related characteristics in the manufacturer datasheet before finalizing the design. Place the switch away from high-current return paths and connect the exposed pad according to the package guidance to maintain predictable thermal and grounding behavior.

🌐

Communications Interface Routing

The ISL84684IR provides compact 2:1 routing for moderate-speed communication and control interfaces. Its 27ns switching time allows the control system to change paths quickly, while the two independent switch circuits can support transmit, receive, or complementary routing functions. Because the device is classified as an analog switch rather than a guaranteed high-speed differential multiplexer, designers must confirm bandwidth, insertion loss, off-isolation, and signal-integrity margins against the interface specification. Use short, controlled-impedance routing where applicable, keep the ground connection short, and validate the exposed-pad layout. A Renesas cross-reference review is appropriate before assigning this part to a new communications footprint.

🏭

Industrial Control Signal Multiplexing

The ISL84684IR can multiplex low-level control signals in a compact industrial module. Two 2:1 sections allow a controller to choose between two command or feedback paths while retaining a small 3 x 3 mm footprint. The 500mOhm on-resistance limits the resistive drop in the selected path, and the 4nA leakage helps when returning signals are weakly driven. Industrial systems must also account for supply transients, temperature range, isolation rules, and the logic levels used to control the switches. Validate those conditions against the datasheet because package dimensions alone do not establish industrial suitability. Maintain a continuous ground reference and consider the exposed pad when planning copper and thermal conditions.

📱

Portable and Wearable Signal Control

The ISL84684IR is useful in space-constrained portable equipment where two compact signal switches can replace larger discrete routing arrangements. The 10-TDFN package occupies only 3 x 3 mm, while the 40nA supply current is consistent with low-power design goals. The 4nA leakage can be important when the switch connects to sensor or electrode nodes with high source impedance. Actual battery-life impact should be calculated from standby leakage, control activity, and the switched-node biasing because the device’s own supply current is only part of the system budget. Review the complete pin configuration and exposed-pad requirements before layout, and keep the switch away from noisy boost-converter and display-driver regions.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

ISL84684IRZ Same-family dual SPDT routing option ব্যবহৃত হয়: Sensor Signal Routing, Test and Measurement Signal Control, Audio Signal Selection, Communications Interface Routing, Industrial Control Signal Multiplexing, Portable and Wearable Signal Control FSA2257L10X Same-package switching-device comparison option ব্যবহৃত হয়: Sensor Signal Routing, Test and Measurement Signal Control, Audio Signal Selection, Communications Interface Routing, Industrial Control Signal Multiplexing, Portable and Wearable Signal Control
What is the ISL84684IR?
The ISL84684IR is a Renesas Electronics dual 2:1 analog switch in a 10-TDFN package. It contains two SPDT switch circuits with a stated 500mOhm on-resistance, 27ns switching time, 50ns break time, and 4nA leakage current. According to the Renesas ISL84684 datasheet, the device is intended for compact analog-signal routing and multiplexing applications.
What are the key specifications of ISL84684IR that engineers should know?
The key ISL84684IR specifications are two 2:1 switch circuits, 500mOhm on-resistance, 27ns switching time, 50ns break time, 4nA leakage current, and 40nA supply current. The manufacturer datasheet identifies a 10-TDFN package with 3 x 3 mm dimensions. These characteristics place the part in the low-leakage, low-resistance, fast-switching analog-switch category.
Where can I download the ISL84684IR datasheet PDF?
The official ISL84684IR datasheet PDF is available from the Renesas Electronics product document page at https://www.renesas.com/en/document/dst/isl84684-datasheet. That document is the primary reference for the complete electrical characteristics, pin descriptions, package dimensions, exposed-pad requirements, leakage-current definitions, and recommended operating conditions.
Where can I find the ISL84684IR pinout?
The ISL84684IR pinout is found in the pin-configuration section of the Renesas ISL84684 datasheet. The device uses a 10-TDFN package with an exposed pad, and the complete pin numbering must be taken from that document before PCB routing. Use the pin-description and package diagrams to identify power, ground, control inputs, common terminals, and switched terminals.
What can replace the ISL84684IR?
The ISL84684IRZ is a confirmed drop-in replacement candidate because it retains the TDFN package and is described as having consistent terminals, package, performance, and functional characteristics. The ISL84684IRZ may differ in temperature grade or ordering suffix, so verify the exact rating and operating limits. Use the Request a Quote form on this page to confirm availability and sourcing details.
Is the ISL84684IR the same as ISL84684IRZ?
The ISL84684IRZ is functionally and mechanically compatible with the ISL84684IR according to the published cross-reference description. Both use a TDFN package with consistent terminals, and the replacement does not require modification of the existing footprint. Confirm the temperature rating, marking, and full operating limits before using the suffix variant as a production substitute.
What is the best drop-in replacement for ISL84684IR?
The ISL84684IRZ is the clearest drop-in replacement for the ISL84684IR because the package, terminals, and functional characteristics are described as consistent. The cross-brand FSA2257L10X is another same-package switching-device candidate listed for comparison, but its control and electrical details should be checked against the ISL84684IR datasheet before substitution.
ISL84684IR vs ISL84684IRZ - which is better for a new design?
Choose ISL84684IRZ when its temperature grade, marking, or qualification better matches the production requirement because it retains the same TDFN footprint and functional characteristics. Choose ISL84684IR when that exact ordering suffix is preferred for lifecycle or component-control reasons. Neither part offers a meaningful functional advantage based on the published package and terminal compatibility.
When should I choose ISL84684IR over another dual analog switch?
Choose the ISL84684IR when a design needs two independent 2:1 paths, 500mOhm on-resistance, 27ns switching time, and low 4nA leakage in a compact 10-TDFN package. Select another switch if its channel count, voltage rating, logic thresholds, resistance, leakage, or power consumption better matches the signal path. Verify all limits rather than relying on package similarity alone.
Is ISL84684IR suitable for high-impedance sensor interfaces?
The ISL84684IR can suit high-impedance sensor interfaces when its 4nA leakage and 500mOhm on-resistance meet the measurement error and bandwidth requirements. Leakage-induced error can still matter at very high source impedances, so calculate the permitted bias current and compare it with the sensor output impedance. Confirm the signal amplitude and supply limits from the manufacturer datasheet.
How much power or heat does ISL84684IR dissipate?
The ISL84684IR is a low-power interface device whose normal losses are primarily associated with on-state conduction and control-input current. The documented 40nA supply current indicates very low internal consumption, but total dissipation also depends on the switched voltage, 500mOhm on-resistance, and duty cycle. Calculate P = I²R for each conducting path using the actual application current.
Where can I buy ISL84684IR online?
Use the Request a Quote form on this page to request ISL84684IR availability, current lead time, and a purchase quotation for the exact 10-TDFN package. The form avoids static or stale pricing and lets the request be associated with the correct MPN. Confirm the requested quantity, delivery destination, and assembly packaging before placing an order.
What is the price of ISL84684IR?
The current ISL84684IR price is best obtained through the Request a Quote form on this page because quotations depend on quantity, availability, and current market conditions. Submit the exact MPN, required quantity, and delivery location to receive current commercial terms. No fixed unit price should be inferred from unrelated interface-switch listings.
What is the lead time for ISL84684IR?
The current lead time for ISL84684IR should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, production status, package format, and destination, so a fixed delivery interval would be misleading. Include the required quantity and shipment location in the request to obtain a usable schedule.
Is ISL84684IR in stock?
Current ISL84684IR inventory status is best confirmed through the Request a Quote form on this page. Because availability can change during the quotation process, submit the exact MPN, required quantity, and target date. The request can then be matched to current production and distribution conditions for the 10-TDFN package.
What is the best Renesas equivalent for ISL84684IR?
The best confirmed Renesas alternative is the ISL84684IRZ, which is described as completely replaceable because its terminals, package, performance parameters, and functional characteristics are consistent with the ISL84684IR. Verify the exact temperature range and qualification status for the selected suffix. For cross-brand options, compare the control logic and electrical limits rather than package dimensions alone.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ISL84684IR — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the ISL84684IR when the design requires two compact 2:1 signal paths, a 500mOhm on-resistance, 27ns switching time, and low leakage in a 10-TDFN package. The 4nA leakage figure makes it particularly relevant to high-impedance sensor and measurement nodes. ISL84684IRZ is the preferred drop-in alternative when its ordering suffix, temperature grade, qualification, and lifecycle terms better fit the design. FSA2257L10X is a cross-brand same-package candidate, but engineers should verify pin functions, control thresholds, on-resistance, bandwidth, off-isolation, and exposed-pad requirements before replacement. If a design needs more than two switch sections, different logic levels, lower on-resistance, a higher voltage rating, or qualified automotive performance, select a device with those characteristics rather than assuming package equivalence is sufficient.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ISL84684IRZ FSA2257L10X
Package 10-TDFN (3 x 3 mm) TDFN - same package TDFN-10 - same package
Brand Renesas Electronics Renesas Electronics onsemi
Number of Pins 10 pins 10 pins 10 pins

মূল পার্থক্যসমূহ

  • Dual 2:1 routing in a compact package (বনামFSA2257L10X)
  • Defined low on-resistance for compact analog routing (বনামFSA2257L10X)
  • Fast 27ns switching behavior (বনামFSA2257L10X)

ডিজাইন নোট

Route each switched signal directly to its destination and keep the analog-signal traces short and away from the control inputs. The 10-TDFN package requires close attention to its exposed pad; use the manufacturer land pattern and verify whether the pad is connected, floated, or tied to ground according to the datasheet. Place local bypass capacitance near the supply and ground pins, and provide a continuous ground return for both switch sections.

Calculate the maximum voltage drop in the conducting path as I x 500mOhm, then compare that drop with the receiving circuit’s noise margin or accuracy requirement. For high-impedance nodes, include the 4nA leakage current when estimating bias error and confirm that the node remains within the supported common-mode range. Off-isolation and bandwidth must be checked against the source impedance and operating frequency.

Do not treat the 3 x 3 mm TDFN footprint alone as proof of drop-in compatibility. Compare signal-pin assignments, control thresholds, supply range, exposed-pad requirements, and timing characteristics between the original and replacement. The ISL84684IRZ is a strong suffix-family candidate, while a cross-brand replacement still requires a complete electrical and pin-function review before schematic or layout release.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Compliance status is not stated in the cited component records. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification requirements from the current manufacturer product documentation.

ডেটা যাচাই করা হয়েছে: 2026-11-10 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ISL84684IR datasheet ISL84684IR specifications ISL84684IR pinout ISL84684IR datasheet pdf Renesas ISL84684IR ISL84684IR 500mOhm ISL84684IR 10-TDFN ISL84684IR equivalent ISL84684IR replacement ISL84684IR vs ISL84684IRZ ISL84684IR vs FSA2257L10X ISL84684IR price ISL84684IR stock ISL84684IR application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Renesas Electronics ISL84684IR ISL84684IRZ FSA2257L10X onsemi analog switch SPDT switch 2:1 switch multiplexer interface IC semiconductor on-resistance switching time break time leakage current supply current 10-TDFN surface-mount package high-impedance sensor test and measurement signal routing exposed pad
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন