KSZ8081MLXIA - 3.3V 10/100 Ethernet PHY | Microchip
MPN: KSZ8081MLXIA ✓ সক্রিয়KSZ8081MLXIA সারাংশ
An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts digital data into electrical signals suitable for twisted-pair cabling and converts received signals back into digital data. Within the network interface hierarchy, the PHY operates below the MAC controller and connects the digital Ethernet interface to an external transformer, magnetics, and RJ45 connector. The KSZ8081 therefore belongs to the integrated-circuit, network-interface, and Ethernet physical-layer categories.
The KSZ8081 integrates the drivers required for 10BASE-T and 100BASE-TX operation, allowing both rates to use the same magnetic component. Its 10BASE-T drivers perform internal wave shaping and pre-emphasis and generate a typical 10BASE-T signal amplitude of 2.5 V peak. The device also supports RMII, providing a standardized parallel interface for connection to an Ethernet MAC in embedded systems.
The highly integrated PHY architecture is intended to reduce board space and simplify 10/100 Ethernet connectivity. The industrial-temperature ordering option supports operation from -40 °C to +85 °C. A 48-LQFP package provides 48 external connections for supply rails, digital interface signals, analog transmit and receive functions, clock and reset control, and exposed device-support functions.
Typical uses include industrial control equipment, embedded Ethernet modules, factory automation controllers, network interface adapters, print servers, and embedded systems requiring a 10/100 Ethernet copper connection. The PHY is appropriate when the system already provides a compatible Ethernet MAC or controller and needs a standardized physical layer for CAT-5 cabling.
Designers should follow the manufacturer datasheet for the RMII strap resistors, clock requirements, magnetic-device selection, center-tap termination, analog supply filtering, and exposed-pad layout. The analog and digital supply domains should be decoupled as specified, and the magnetic and connector network should preserve the differential signal path needed for reliable 100BASE-TX operation.
This page combines the manufacturer device information, exact ordering details, temperature distinctions, interface characteristics, and documented rollover considerations into a design-focused reference. It also identifies the limits of claimed drop-in alternatives so engineers can avoid assuming that a functional Ethernet PHY is electrically and mechanically interchangeable with the KSZ8081MLXIA.
এর জন্য ড্রপ-ইন বিকল্প KSZ8081MLXIA — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
KSZ8081MLXCA
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →KSZ8081MLXIA বিশেষণ
| Product Type | 10BASE-T/100BASE-TX Ethernet physical-layer transceiver |
| Supported Data Rates | 10 Mbps and 100 Mbps |
| সাপ্লাই ভোল্টেজ | 3.3 V |
| Supply Type | Single supply |
| Channel Count | 1 channel |
| Media Interface | 10BASE-T/100BASE-TX over CAT-5 UTP |
| Digital Interface | RMII |
| 10BASE-T Signal Amplitude | 2.5 V peak typical |
| 10BASE-T Driver Features | Internal wave shaping and pre-emphasis |
| প্যাকেজ | 48-pin LQFP |
| Package Dimensions | 7 x 7 mm |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +85 °C |
| মাউন্টিং টাইপ | Surface mount |
| Packing Media | Tray |
KSZ8081MLXIA 7 x 7 mm পিন কনফিগারেশন গাইড
KSZ8081MLXIA (7 x 7 mm প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি KSZ8081MLXIA.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
KSZ8081MLXIA এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Ethernet Control Equipment, Embedded Network Adapter, Factory Automation Gateway, Network Instrumentation, Print Server and Copier Interface, IoT Edge Device.
Industrial Ethernet Control Equipment
The KSZ8081MLXIA fits industrial controllers, sensor gateways, and remote I/O modules that require a compact 10/100 Ethernet copper interface. Its -40 °C to +85 °C rating supports demanding factory environments, while the integrated 10BASE-T and 100BASE-TX drivers allow both speeds to use the same magnetic component. With RMII, the PHY can connect to a compatible MAC and provide a 100 Mbps link over CAT-5 UTP. The design trade-off is that the 3.3 V analog and digital rails still require careful filtering, and the magnetic and RJ45 network must follow the manufacturer reference layout.
সুপারিশকৃত
Embedded Network Adapter
The KSZ8081MLXIA is suitable for embedded Linux, real-time control, and single-board network adapters that already include a compatible Ethernet MAC. RMII provides a standardized connection between the MAC and PHY, while the single-channel 3.3 V device supports both 10 Mbps and 100 Mbps operation. A 48-LQFP package is more mechanically substantial than the smallest Ethernet PHY packages, but it offers 48 accessible connections and a clear industrial temperature range. Designers should reserve the required strap components, provide a compliant 50 MHz RMII reference clock where specified, and validate the complete MAC-PHY timing chain.
সুপারিশকৃত
Factory Automation Gateway
A KSZ8081MLXIA-based gateway can bridge a controller or embedded processor to a 10/100 Ethernet industrial network. The PHY handles the physical signaling over CAT-5 UTP, including the integrated 10BASE-T wave shaping, pre-emphasis, and 2.5 V peak typical 10BASE-T output described by the manufacturer. The RMII interface keeps the digital connection to the host controller relatively defined. For gateway designs, validate EMC margins, cable length, magnetic-device response, and link behavior across temperature corners. If the enclosure is electrically noisy, add supply filtering and controlled return paths rather than relying only on the PHY’s integrated transmit circuitry.
সুপারিশকৃত
Network Instrumentation
The KSZ8081MLXIA can add copper Ethernet connectivity to test equipment, data-acquisition modules, and programmable instruments that use an RMII-capable controller. Supporting both 10BASE-T and 100BASE-TX permits compatibility with legacy 10 Mbps infrastructure as well as faster links. The device’s industrial temperature range supports unattended equipment operating outside typical office temperatures. Designers should keep the RMII clock and data traces short, follow the manufacturer’s magnetic-interface component guidance, and provide separate filtering for analog and digital supply domains. The PHY is intended for standard CAT-5 UTP and does not remove the need for a compliant Ethernet transformer or RJ45 implementation.
সুপারিশকৃত
Print Server and Copier Interface
The KSZ8081MLXIA is applicable to print servers, copiers, and imaging appliances that require one 10/100 Ethernet port. A 100 Mbps PHY provides sufficient throughput for many embedded print-control tasks, while 10BASE-T support preserves compatibility with slower legacy networks. The 48-LQFP package and single 3.3 V supply simplify integration into a controller board with conventional surface-mount assembly. Reliable implementation depends on correct transformer selection, center-tap handling, differential routing, and firmware initialization. Keep the magnetics and connector away from high-current switching nodes, and verify the RJ45 shield termination strategy against the product’s EMC requirements.
সুপারিশকৃত
IoT Edge Device
The KSZ8081MLXIA can provide wired Ethernet connectivity in an IoT edge device, building controller, or industrial smart gateway. Its RMII interface allows an embedded host processor to supervise the link while the PHY handles 10BASE-T and 100BASE-TX signaling on standard CAT-5 cable. The broad -40 °C to +85 °C operating range is useful for remote or unattended installations where temperature stability matters. Compared with a wireless-only endpoint, this wired design offers deterministic local connectivity and avoids radio integration. Engineers must still account for isolation, surge protection, cable fault handling, and secure network provisioning; the PHY itself does not provide those system-level protections.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা KSZ8081MLXIA — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | KSZ8081MLXCA |
|---|---|---|
| Package | 48-LQFP, 7 x 7 mm | 48-LQFP |
| Brand | Microchip Technology | Microchip Technology |
| Product Type | 10BASE-T/100BASE-TX Ethernet PHY | 10BASE-T/100BASE-TX Ethernet PHY |
| Supported Data Rates | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps |
| Minimum Operating Temperature | -40 °C | 0 °C |
| Maximum Operating Temperature | +85 °C | +70 °C |
| Digital Interface | RMII | RMII |
| Channel Count | 1 channel | 1 channel |
| Packing Media | Tray | Tape and reel |
মূল পার্থক্যসমূহ
- Broader industrial temperature coverage than the commercial-temperature sibling (বনামKSZ8081MLXCA)
- Single package supports both standard copper Ethernet rates (বনামKSZ8081MLXCA)
- Industrial 3.3 V PHY with RMII in a 48-LQFP footprint (বনামKSZ8081MLXCA)
ডিজাইন নোট
Separate the analog and digital supply paths as shown in the manufacturer application circuit. Place the specified input capacitors directly beside the corresponding power pins and maintain a low-impedance ground return. The KSZ8081 uses a 3.3 V single supply, but its Ethernet transmit and receive functions remain sensitive to supply disturbance. Validate the design with ripple and transient measurements at the device pins rather than relying only on the power-converter output specification.
Use the manufacturer layout for the 48-LQFP footprint, exposed-pad connection, magnetic device, center taps, and RJ45 path. Keep the 100BASE-TX differential pairs continuous with controlled impedance and minimize stubs and test-point discontinuities. Do not route switching-regulator or digital high-current paths beneath the analog and magnetics area. A mechanically correct but electrically noisy RJ51 or RJ45 implementation can still produce unstable link behavior or poor radiated-immunity margin.
Treat the RMII clock and data interface as a coordinated timing group. Route the reference clock from its source to the PHY and MAC without unnecessary stubs, and follow the manufacturer requirements for clock source and frequency. Verify setup and hold timing with the actual MAC, PHY, PCB, and connector combination. The 48-LQFP device has many external functions, so assigning every pin from the official pin-description table is essential to avoid accidental strap or signal conflicts.
কমপ্লায়েন্স তথ্য
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact ordering code.