Microchip Technology

KSZ8081MLXIA - 3.3V 10/100 Ethernet PHY | Microchip

MPN: KSZ8081MLXIA ✓ Aktif
3.3 V Vdss 48-pin LQFP Package
MOQ: 1 |

KSZ8081MLXIA Ringkasan

The Microchip Technology KSZ8081MLXIA is a single-channel, single-supply 10BASE-T/100BASE-TX Ethernet physical-layer transceiver operating from a 3.3 V supply. It supports data rates of 10 Mbps and 100 Mbps and is packaged in a 48-pin LQFP measuring 7 x 7 mm. The KSZ8081 is designed for transmission and reception over standard CAT-5 unshielded twisted-pair cable.

An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts digital data into electrical signals suitable for twisted-pair cabling and converts received signals back into digital data. Within the network interface hierarchy, the PHY operates below the MAC controller and connects the digital Ethernet interface to an external transformer, magnetics, and RJ45 connector. The KSZ8081 therefore belongs to the integrated-circuit, network-interface, and Ethernet physical-layer categories.

The KSZ8081 integrates the drivers required for 10BASE-T and 100BASE-TX operation, allowing both rates to use the same magnetic component. Its 10BASE-T drivers perform internal wave shaping and pre-emphasis and generate a typical 10BASE-T signal amplitude of 2.5 V peak. The device also supports RMII, providing a standardized parallel interface for connection to an Ethernet MAC in embedded systems.

The highly integrated PHY architecture is intended to reduce board space and simplify 10/100 Ethernet connectivity. The industrial-temperature ordering option supports operation from -40 °C to +85 °C. A 48-LQFP package provides 48 external connections for supply rails, digital interface signals, analog transmit and receive functions, clock and reset control, and exposed device-support functions.

Typical uses include industrial control equipment, embedded Ethernet modules, factory automation controllers, network interface adapters, print servers, and embedded systems requiring a 10/100 Ethernet copper connection. The PHY is appropriate when the system already provides a compatible Ethernet MAC or controller and needs a standardized physical layer for CAT-5 cabling.

Designers should follow the manufacturer datasheet for the RMII strap resistors, clock requirements, magnetic-device selection, center-tap termination, analog supply filtering, and exposed-pad layout. The analog and digital supply domains should be decoupled as specified, and the magnetic and connector network should preserve the differential signal path needed for reliable 100BASE-TX operation.

This page combines the manufacturer device information, exact ordering details, temperature distinctions, interface characteristics, and documented rollover considerations into a design-focused reference. It also identifies the limits of claimed drop-in alternatives so engineers can avoid assuming that a functional Ethernet PHY is electrically and mechanically interchangeable with the KSZ8081MLXIA.

Alternatif penggantian untuk KSZ8081MLXIA — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

KSZ8081MLXCA

✅ Drop-In
Microchip Technology
📦 48-LQFP
10BASE-T/100BASE-TX Ethernet physical-layer transceiver · 10 Mbps and 100 Mbps · 1 channel · Single supply · 3.135 V to 3.465 V · 3.3 V · CAT-5 unshielded twisted-pair cable · 48-LQFP, 7 mm × 7 mm

Kontak untuk harga

Lihat Datasheet →

KSZ8081MLXIA Spesifikasi

Product Type 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Supported Data Rates 10 Mbps and 100 Mbps
Tegangan Pemuat 3.3 V
Supply Type Single supply
Channel Count 1 channel
Media Interface 10BASE-T/100BASE-TX over CAT-5 UTP
Digital Interface RMII
10BASE-T Signal Amplitude 2.5 V peak typical
10BASE-T Driver Features Internal wave shaping and pre-emphasis
Paket 48-pin LQFP
Package Dimensions 7 x 7 mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Tipe Mounting Surface mount
Packing Media Tray

KSZ8081MLXIA 7 x 7 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk KSZ8081MLXIA (7 x 7 mm pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 7 x 7 mm untuk KSZ8081MLXIA

Tidak ada data diatribut pin yang tersedia untuk KSZ8081MLXIA.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

KSZ8081MLXIA cocok untuk 6 aplikasis: Industrial Ethernet Control Equipment, Embedded Network Adapter, Factory Automation Gateway, Network Instrumentation, Print Server and Copier Interface, IoT Edge Device.

🏭

Industrial Ethernet Control Equipment

The KSZ8081MLXIA fits industrial controllers, sensor gateways, and remote I/O modules that require a compact 10/100 Ethernet copper interface. Its -40 °C to +85 °C rating supports demanding factory environments, while the integrated 10BASE-T and 100BASE-TX drivers allow both speeds to use the same magnetic component. With RMII, the PHY can connect to a compatible MAC and provide a 100 Mbps link over CAT-5 UTP. The design trade-off is that the 3.3 V analog and digital rails still require careful filtering, and the magnetic and RJ45 network must follow the manufacturer reference layout.

🖥️

Embedded Network Adapter

The KSZ8081MLXIA is suitable for embedded Linux, real-time control, and single-board network adapters that already include a compatible Ethernet MAC. RMII provides a standardized connection between the MAC and PHY, while the single-channel 3.3 V device supports both 10 Mbps and 100 Mbps operation. A 48-LQFP package is more mechanically substantial than the smallest Ethernet PHY packages, but it offers 48 accessible connections and a clear industrial temperature range. Designers should reserve the required strap components, provide a compliant 50 MHz RMII reference clock where specified, and validate the complete MAC-PHY timing chain.

🌐

Factory Automation Gateway

A KSZ8081MLXIA-based gateway can bridge a controller or embedded processor to a 10/100 Ethernet industrial network. The PHY handles the physical signaling over CAT-5 UTP, including the integrated 10BASE-T wave shaping, pre-emphasis, and 2.5 V peak typical 10BASE-T output described by the manufacturer. The RMII interface keeps the digital connection to the host controller relatively defined. For gateway designs, validate EMC margins, cable length, magnetic-device response, and link behavior across temperature corners. If the enclosure is electrically noisy, add supply filtering and controlled return paths rather than relying only on the PHY’s integrated transmit circuitry.

🔧

Network Instrumentation

The KSZ8081MLXIA can add copper Ethernet connectivity to test equipment, data-acquisition modules, and programmable instruments that use an RMII-capable controller. Supporting both 10BASE-T and 100BASE-TX permits compatibility with legacy 10 Mbps infrastructure as well as faster links. The device’s industrial temperature range supports unattended equipment operating outside typical office temperatures. Designers should keep the RMII clock and data traces short, follow the manufacturer’s magnetic-interface component guidance, and provide separate filtering for analog and digital supply domains. The PHY is intended for standard CAT-5 UTP and does not remove the need for a compliant Ethernet transformer or RJ45 implementation.

🖨️

Print Server and Copier Interface

The KSZ8081MLXIA is applicable to print servers, copiers, and imaging appliances that require one 10/100 Ethernet port. A 100 Mbps PHY provides sufficient throughput for many embedded print-control tasks, while 10BASE-T support preserves compatibility with slower legacy networks. The 48-LQFP package and single 3.3 V supply simplify integration into a controller board with conventional surface-mount assembly. Reliable implementation depends on correct transformer selection, center-tap handling, differential routing, and firmware initialization. Keep the magnetics and connector away from high-current switching nodes, and verify the RJ45 shield termination strategy against the product’s EMC requirements.

🧩

IoT Edge Device

The KSZ8081MLXIA can provide wired Ethernet connectivity in an IoT edge device, building controller, or industrial smart gateway. Its RMII interface allows an embedded host processor to supervise the link while the PHY handles 10BASE-T and 100BASE-TX signaling on standard CAT-5 cable. The broad -40 °C to +85 °C operating range is useful for remote or unattended installations where temperature stability matters. Compared with a wireless-only endpoint, this wired design offers deterministic local connectivity and avoids radio integration. Engineers must still account for isolation, surge protection, cable fault handling, and secure network provisioning; the PHY itself does not provide those system-level protections.

What is the KSZ8081MLXIA?
The KSZ8081MLXIA is a single-channel, single-supply 10BASE-T/100BASE-TX Ethernet physical-layer transceiver from Microchip Technology. It supports 10 Mbps and 100 Mbps data rates over standard CAT-5 unshielded twisted-pair cable and operates from a 3.3 V supply. According to the Microchip manufacturer page, the KSZ8081 is a highly integrated PHY solution intended to reduce board space.
What package does the KSZ8081MLXIA use?
The KSZ8081MLXIA uses a 48-pin LQFP package measuring 7 x 7 mm. The package is intended for surface-mount assembly and is supplied in tray packaging for the ordering code shown. The 48-LQFP footprint must be matched exactly during PCB design; use the manufacturer pin-description table and package drawing when assigning nets and placing the exposed thermal pad.
Where can I download the KSZ8081MLXIA datasheet PDF?
The KSZ8081MLXIA datasheet PDF is available from the official Microchip device-document URL shown on this page. It documents the electrical characteristics, RMII interface, magnetic-interface behavior, register map, application circuit, and package information. According to Microchip, the document is titled “10Base-T/100Base-TX Physical Layer Transceiver” and covers the exact KSZ8081MLX ordering family.
Where can I find the KSZ8081MLXIA pinout?
The authoritative KSZ8081MLXIA pinout appears in the pin-description table and package drawing in the Microchip manufacturer datasheet. Use that table to identify supply, ground, RMII, clock, reset, transmit, receive, and other device functions on the 48-pin LQFP. The KSZ8081MLXIA is a complex mixed-signal Ethernet PHY, so pin names should be assigned directly from the manufacturer document rather than inferred from another package.
What Ethernet speeds does the KSZ8081MLXIA support?
The KSZ8081MLXIA supports 10BASE-T at 10 Mbps and 100BASE-TX at 100 Mbps. According to the Microchip manufacturer page, the device transmits and receives data over standard CAT-5 unshielded twisted-pair cable. Its integrated drivers allow both 10BASE-T and 100BASE-TX transmission to use the same external magnetic component, simplifying board design.
Does the KSZ8081MLXIA support RMII?
Yes, the KSZ8081 supports RMII, the Reduced Media Independent Interface used to connect an Ethernet PHY to an Ethernet MAC. The RMII implementation lets the KSZ8081 operate with a compatible MAC or controller rather than requiring a proprietary parallel bus. Follow the manufacturer datasheet for required mode straps, reference-clock configuration, interface timing, and signal mapping.
Where can I buy KSZ8081MLXIA online?
Use the “Request a Quote” form on this page to request KSZ8081MLXIA availability, MOQ, and a current quotation. The form allows the request to be routed for the exact 48-pin LQFP ordering code without relying on a static listing that may not reflect current inventory. Stock and delivery schedules should be confirmed when the quote is prepared.
What is the price of KSZ8081MLXIA?
The current price of KSZ8081MLXIA is obtained through the “Request a Quote” form on this page. Pricing depends on order quantity, packing format, and supply availability, so a static figure can become stale or fail to represent the exact part requested. Submit the full MPN and required quantity so the quotation can be matched to the 48-pin LQFP tray-packed device.
What is the lead time for KSZ8081MLXIA?
The current lead time for KSZ8081MLXIA should be confirmed through the “Request a Quote” form on this page. Manufacturer inventory and shipment schedules can change, while tray availability may differ from reel-packed production quantities. Include the required quantity, target date, and whether partial trays are acceptable in the request to obtain an actionable delivery commitment.
Is KSZ8081MLXIA in stock?
KSZ8081MLXIA availability is confirmed through the “Request a Quote” form on this page because stock levels and production allocation can change rapidly. Request the exact ordering code, quantity, tray quantity, and required delivery date. The manufacturer direct product listing is an appropriate starting point for confirming current commercial status, while the quotation response establishes the committed quantity and schedule.
What is the best drop-in replacement for KSZ8081MLXIA?
The closest documented drop-in choice is the Microchip KSZ8081MLXCA because it shares the 48-LQFP KSZ8081 interface arrangement but has a narrower temperature rating. The KSZ8081MLXIA operates from -40 °C to +85 °C, while the KSZ8081MLXCA is rated from 0 °C to +70 °C. No cross-brand drop-in replacement can be confirmed from the available manufacturer and cross-reference information.
Can KSZ8081MLXCA replace KSZ8081MLXIA?
The KSZ8081MLXCA can be considered only when the system’s ambient-temperature requirement lies within 0 °C to +70 °C. It uses the same 48-LQFP KSZ8081 family package, but its maximum operating temperature is 15 °C below the KSZ8081MLXIA’s +85 °C rating. Verify every pin, strap, register, and magnetic-interface requirement against the manufacturer datasheet before substitution.
KSZ8081MLXIA vs KSZ8001LIA3: which is better for an industrial design?
The KSZ8081MLXIA is the better-documented choice for an industrial design requiring operation down to -40 °C and a 48-LQFP package. A published comparison identifies differences in mounting style and package characteristics between the KSZ8081MLXIA and KSZ8001LIA3, so the KSZ8001LIA3 should not be treated as a drop-in substitute without completing a pin, register, and footprint review.
When should I choose KSZ8081MLXIA instead of KSZ8001LIA3?
Choose the KSZ8081MLXIA when the design requires the documented 48-LQFP footprint, a 3.3 V single-supply design, RMII connectivity, and an industrial temperature range extending to +85 °C. The KSZ8001LIA3 may offer different package and mounting characteristics, so it is preferable only when its independently verified electrical interface and board footprint satisfy the complete system requirements.
Can a Texas Instruments PHY replace the KSZ8081MLXIA?
The Texas Instruments DP83826A can replace KSZ8081 functions only through a documented system-redesign process, not as a pin-for-pin drop-in replacement. Texas Instruments’ rollover document compares required external components, pin functions, features, and register operation because differences affect the existing PCB and firmware. Use that rollover document to plan a redesign rather than assuming mechanical and register compatibility.

Data referensi engineering untuk KSZ8081MLXIA — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the KSZ8081MLXIA for a 3.3 V single-supply 10/100 Ethernet design that must operate across the industrial range from -40 °C to +85 °C. It is particularly appropriate when the host uses RMII and the PCB can accommodate the 48-LQFP footprint. The KSZ8081MLXCA is the closer documented drop-in alternative when its narrower 0 °C to +70 °C rating satisfies the product’s worst-case ambient and enclosure temperature. Do not select the KSZ8001LIA3 merely because it is also a 10/100 PHY: published comparison information indicates package and mounting differences, so confirm the footprint, pin map, register behavior, and electrical requirements. Likewise, the Texas Instruments DP83826A is a redesign path identified through a rollover document rather than a mechanical drop-in. For either alternative, review the current manufacturer datasheet before committing to a schematic or PCB revision.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini KSZ8081MLXCA
Package 48-LQFP, 7 x 7 mm 48-LQFP
Brand Microchip Technology Microchip Technology
Product Type 10BASE-T/100BASE-TX Ethernet PHY 10BASE-T/100BASE-TX Ethernet PHY
Supported Data Rates 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps
Minimum Operating Temperature -40 °C 0 °C
Maximum Operating Temperature +85 °C +70 °C
Digital Interface RMII RMII
Channel Count 1 channel 1 channel
Packing Media Tray Tape and reel

Diferensiator Kunci

  • Broader industrial temperature coverage than the commercial-temperature sibling (vsKSZ8081MLXCA)
  • Single package supports both standard copper Ethernet rates (vsKSZ8081MLXCA)
  • Industrial 3.3 V PHY with RMII in a 48-LQFP footprint (vsKSZ8081MLXCA)

Catatan Desain

Separate the analog and digital supply paths as shown in the manufacturer application circuit. Place the specified input capacitors directly beside the corresponding power pins and maintain a low-impedance ground return. The KSZ8081 uses a 3.3 V single supply, but its Ethernet transmit and receive functions remain sensitive to supply disturbance. Validate the design with ripple and transient measurements at the device pins rather than relying only on the power-converter output specification.

Use the manufacturer layout for the 48-LQFP footprint, exposed-pad connection, magnetic device, center taps, and RJ45 path. Keep the 100BASE-TX differential pairs continuous with controlled impedance and minimize stubs and test-point discontinuities. Do not route switching-regulator or digital high-current paths beneath the analog and magnetics area. A mechanically correct but electrically noisy RJ51 or RJ45 implementation can still produce unstable link behavior or poor radiated-immunity margin.

Treat the RMII clock and data interface as a coordinated timing group. Route the reference clock from its source to the PHY and MAC without unnecessary stubs, and follow the manufacturer requirements for clock source and frequency. Verify setup and hold timing with the actual MAC, PHY, PCB, and connector combination. The 48-LQFP device has many external functions, so assigning every pin from the official pin-description table is essential to avoid accidental strap or signal conflicts.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact ordering code.

Data disahkan pada: 2026-11-14 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

KSZ8081MLXIA datasheet KSZ8081MLXIA datasheet pdf KSZ8081MLXIA pinout KSZ8081MLXIA specifications KSZ8081MLXIA equivalent KSZ8081MLXIA replacement KSZ8081MLXIA drop-in replacement KSZ8081MLXIA price KSZ8081MLXIA stock KSZ8081MLXIA application circuit Microchip KSZ8081MLXIA KSZ8081MLXIA vs KSZ8001LIA3

Komponen dan Istilah Terkait

Microchip Technology KSZ8081 KSZ8081MLXIA KSZ8081MLXCA KSZ8001LIA3 DP83826A Ethernet PHY physical-layer transceiver 10BASE-T 100BASE-TX RMII CAT-5 UTP 10 Mbps 100 Mbps 3.3 V single supply 48-LQFP LQFP package family surface-mount device Ethernet MAC network interface controller magnetic interface RJ45 connector output noise pre-emphasis wave shaping
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ