LAN8720AI-CP-ABC - 10/100 Ethernet PHY | Microchip
MPN: LAN8720AI-CP-ABC ✓ সক্রিয়LAN8720AI-CP-ABC সারাংশ
An Ethernet PHY is the physical-layer component that translates digital data from an Ethernet media-access controller into signals that can traverse a twisted-pair network. In the hierarchy of network semiconductors, the PHY operates below the Ethernet MAC and above the transformer, magnetics, connector, and cable. The RMII interface reduces the number of signals required between the PHY and the host controller, making the LAN8720AI-CP-ABC suitable for compact embedded systems with limited connector and routing resources.
Key features include full-duplex 10BASE-T and 100BASE-TX operation, automatic speed and duplex negotiation, HP Auto-MDIX support, and operation from 1.8 V, 2.5 V, or 3.3 V supplies. IEEE 802.3-2005-compliant register functions are supported alongside vendor-specific registers. These features allow the PHY to connect to an RMII-based microcontroller or dedicated Ethernet controller without requiring a separate manual speed configuration.
The LAN8720AI-CP-ABC integrates the digital transceiver, analog transmit and receive channels, clock recovery, and auto-negotiation functions into one package. Its 24-SQFN footprint supports high-density PCB layouts, while the exposed thermal pad provides a direct heat-transfer path. The interface is designed for host systems operating at 50 MHz RMII reference-clock frequency, which simplifies synchronization with common embedded Ethernet media-access controllers.
Typical applications include industrial Ethernet controllers, embedded IoT gateways, factory automation equipment, network-connected sensors, compact embedded Linux systems, and consumer or communications equipment with a 10/100 Ethernet link. The PHY is particularly useful when the design requires wired networking but must limit board area, interface pin count, and power consumption compared with a larger Ethernet transceiver implementation.
Layout quality is critical because high-speed digital and analog signals share the same package. Place the PHY close to the Ethernet magnetics and connector, keep the RMII clock and data traces short, provide clean supply decoupling, and follow the manufacturer’s reference layout for the exposed pad and mixed-signal return paths. This page combines package and interface guidance with practical replacement analysis for design reviews and sourcing.
The manufacturer identifies the LAN8720A family as active and distinguishes extended-commercial and industrial temperature options. For new designs, confirm the exact ordering code, package, thermal grade, and RMII implementation against the current manufacturer datasheet before releasing production artwork.
এর জন্য ড্রপ-ইন বিকল্প LAN8720AI-CP-ABC — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible LAN8720AI-CP-ABC (একই form factor এবং footprint) — পার্থক্য রয়েছে Auto-MDIX, Package, Product Type.
LAN8720A-CP-ABC
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
KSZ8081RNACA
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →LAN8720AI-CP-ABC বিশেষণ
| Product Type | 10/100 Ethernet PHY transceiver |
| Supported Data Rates | 10 Mbps and 100 Mbps |
| Ethernet Standards | 10BASE-T and 100BASE-TX |
| Host Interface | RMII |
| Duplex Support | Full-duplex |
| Operating Supply Voltages | 1.8 V, 2.5 V, or 3.3 V |
| RMII Reference Clock | 50 MHz |
| Auto-Negotiation | Automatic speed and duplex selection |
| Auto-MDIX | HP Auto-MDIX supported |
| Register Compatibility | IEEE 802.3-2005-compliant and vendor-specific registers |
| অপারেটিং তাপমাত্রার পরিসর | -40°C to 85°C |
| প্যাকেজ | 24-SQFN, 4 x 4 mm |
| পিন সংখ্যা | 24 pins |
| মাউন্টিং টাইপ | Surface mount |
| Power Technology | Microchip flexPWR technology |
| Exposed Thermal Pad | Present |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | unknown |
LAN8720AI-CP-ABC 24-sqfn, 4 x 4 mm পিন কনফিগারেশন গাইড
LAN8720AI-CP-ABC (24-sqfn, 4 x 4 mm প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি LAN8720AI-CP-ABC.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
LAN8720AI-CP-ABC এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Embedded Ethernet Gateway, IoT Sensor and Controller Hub, Networked Factory Automation Equipment, Compact Network Appliance, Industrial Test and Measurement Instrument, Robotics and Autonomous Equipment.
Industrial Embedded Ethernet Gateway
The LAN8720AI-CP-ABC fits industrial embedded gateways because it combines 10BASE-T/100BASE-TX operation, a standard 50 MHz RMII interface, and an industrial -40°C to 85°C temperature rating. It can sit between a microcontroller or application processor and an Ethernet transformer, providing automatic speed and duplex negotiation without manual interface configuration. HP Auto-MDIX also allows the design to accept direct or crossover connections, which simplifies field cabling. The compact 24-SQFN 4 x 4 mm package preserves board area for sensing, storage, and communications functions. Designers should place the PHY close to the magnetics, maintain short RMII routes, and use the manufacturer’s exposed-pad and mixed-signal layout guidance to limit insertion loss and coupling between clock, data, and analog network circuitry.
সুপারিশকৃত
IoT Sensor and Controller Hub
The LAN8720AI-CP-ABC is useful in an IoT sensor hub that adds wired Ethernet to a microcontroller-based product while retaining a small PCB footprint. Its RMII host connection limits the number of high-speed signals between the network PHY and controller, while 10 Mbps and 100 Mbps support allows shared industrial or building networks to be used without demanding gigabit PHY complexity. Automatic negotiation and HP Auto-MDIX improve installation robustness by adapting to link partners and cable arrangements. The 1.8 V, 2.5 V, and 3.3 V operating options can support multiple embedded power domains, but each rail must be checked against the manufacturer’s operating limits and decoupling recommendations. Ethernet magnetics and surge protection remain essential at the external network boundary.
সুপারিশকৃত
Networked Factory Automation Equipment
LAN8720AI-CP-ABC supports factory automation modules that require deterministic wired-network connectivity over a -40°C to 85°C operating range. A 100BASE-TX link provides sufficient bandwidth for supervisory data, configuration traffic, status reporting, and industrial protocol gateways while reducing software and board complexity compared with a larger multi-interface Ethernet solution. The standard RMII interface supports integration with embedded controllers that provide a 50 MHz reference clock, while auto-negotiation removes manual speed configuration from field commissioning. Layout remains the primary implementation risk because the PHY, digital host interface, analog receive path, and Ethernet transformer share a small area. Follow the manufacturer’s reference layout, preserve short clock traces, provide local bypass capacitance, and keep copper and return paths away from the magnetics when the enclosure also contains high-power switching circuitry.
সুপারিশকৃত
Compact Network Appliance
The LAN8720AI-CP-ABC can add a 10/100 Ethernet port to a compact appliance such as a building controller, access terminal, or embedded Linux gateway. Its 24-SQFN footprint is particularly useful where connector placement and board area are constrained. Because the PHY communicates through RMII rather than a parallel MII interface, the host design can reduce routing requirements and connector pressure on the processor. Automatic negotiation, full-duplex operation, and HP Auto-MDIX improve interoperability with office and industrial network equipment. The device can operate with 1.8 V, 2.5 V, or 3.3 V supplies, giving designers flexibility when coordinating processor, memory, and sensor rails. The physical Ethernet port still needs suitable isolation magnetics, a compliant connector path, and ESD protection rated for the installation environment.
সুপারিশকৃত
Industrial Test and Measurement Instrument
LAN8720AI-CP-ABC is appropriate for test and measurement instruments that need a compact Ethernet management or data link. A 100BASE-TX connection can carry instrument status, configuration commands, and sampled results without consuming the larger FPGA or processor resources associated with a high-speed Ethernet PHY. The industrial temperature range allows use in equipment intended for controlled but thermally variable environments, while the RMII interface provides a defined connection to embedded control logic. Stable 50 MHz clocking and clean supply decoupling are essential for reliable data transfer and link training. Place the PHY near the transformer and connector, avoid routing RMII signals through noisy power-converter regions, and use the manufacturer’s recommended capacitor values and reference layout to minimize EMC and ESD-related failures at the external port.
সুপারিশকৃত
Robotics and Autonomous Equipment
The LAN8720AI-CP-ABC can provide wired Ethernet connectivity in robot controllers, autonomous mobile equipment, and machine-vision nodes where a compact interface and broad temperature capability are valuable. The industrial -40°C to 85°C range supports equipment exposed to variable enclosure temperatures, while the 4 x 4 mm 24-SQFN package leaves room for motion-control and sensor circuitry. A 100BASE-TX link is appropriate for supervisory communication, diagnostics, configuration, and non-real-time telemetry. The PHY should be separated as much as practical from motor drivers and switching power stages, and the RMII clock must be routed as a controlled, well-referenced signal. Ethernet magnetics, surge protection, chassis grounding, and careful cable-entry design are especially important in mobile or industrial installations where cables can receive mechanical stress and electrostatic discharge.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LAN8720AI-CP-ABC — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | LAN8720A-CP-ABC | KSZ8081RNACA |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 24-SQFN, 4 x 4 mm | 24-SQFN, 4 x 4 mm | 24-QFN, 4 x 4 mm |
| Supported Speeds | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps |
| Host Interface | RMII | RMII | RMII |
| Operating Supply Voltages | 1.8 V, 2.5 V, or 3.3 V | 1.8 V, 2.5 V, or 3.3 V | 1.8 V, 2.5 V, or 3.3 V |
| Auto-MDIX | HP Auto-MDIX supported | HP Auto-MDIX supported | Auto-MDIX supported |
| Auto-Negotiation | Automatic speed and duplex selection | Automatic speed and duplex selection | Automatic speed and duplex selection |
মূল পার্থক্যসমূহ
- Broader industrial temperature coverage (বনামLAN8720A-CP-ABC)
- Same compact package family for PCB reuse (বনামLAN8720A-CP-ABC)
- Low-power industrial Ethernet integration (বনামKSZ8081RNACA)
ডিজাইন নোট
Place LAN8720AI-CP-ABC close to the Ethernet transformer and connector, and route the analog network signals as short and symmetrical as practical. The RMII clock must arrive at the PHY with a clean reference and controlled return path; avoid crossings with switching-node or high-current supply traces. Use the manufacturer’s land pattern and exposed-pad geometry rather than a generic 24-QFN footprint because pad dimensions and thermal-via requirements can differ.
Provide local bypass capacitance at every supply connection exactly as specified in the manufacturer’s reference circuit, and keep the supply and ground paths short. The PHY supports 1.8 V, 2.5 V, and 3.3 V operating conditions, but the selected rail must satisfy the device’s voltage, timing, and power requirements under every operating mode. Validate startup, link training, and recovery from power cycling when the host controller and PHY use independently sequenced supplies.
Treat the 50 MHz RMII clock as the most timing-sensitive host-interface signal. Route it over a continuous reference plane, minimize stubs, maintain consistent spacing from switching signals, and observe the manufacturer’s clock-output and input-circuit recommendations. Confirm reset polarity, clock-source ownership, and valid operating states in software; identical Ethernet functionality does not guarantee identical reset or interrupt behavior across replacement devices.
Use the application circuit in the manufacturer datasheet for Ethernet magnetics, termination, link-up behavior, and network-side filtering. The Ethernet connector is an external ESD and surge entry point, so place protection at the boundary and preserve the intended isolation path through the magnetics. In industrial products, validate conducted and radiated emissions with the final enclosure, cable, and power-converter layout because PCB-level compliance alone does not establish enclosure-level EMC performance.
কমপ্লায়েন্স তথ্য
The manufacturer identifies IEEE 802.3-2005-compliant register support. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the available product material.